Philips Consumer Lifestyle DC912V37MU Docking Entertainment System Main Unit User Manual pg001 024 DC912 37 Eng

Philips Consumer Lifestyle Docking Entertainment System Main Unit pg001 024 DC912 37 Eng

User Manua

Docking Entertainment System DC912Thank you for choosing Philips.Need help fast? Read your Quick Start Guide and/orUser Manual first for quick tips that make using your Philips product more enjoyable.If you have read your instructions and still need assistance,you may access our online help at www.philips.com/welcomeor call1-888-PHILIPS (744-5477) while with your product.Philips vous remercie devotre confiance.Besoin d'une aiderapide?Le Guide rapide de début et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips.Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse www.philips.com/welcomeou formez le1-800-661-6162 (Francophone)1-888-PHILIPS (744-5477) (English speaking)Veillez à avoir votre produit àportée de main.Gracias por escoger PhilipsNecesita ayudainmediata?Lea primero la Guía rápida del comienzo o el Manual del usuario, en donde encontraráconsejos que le ayudarán a disfrutar plenamente de su producto Philips.Si después de leerlo aún necesita ayuda,consulte nuestro servicio de asistencia en línea en www.philips.com/welcomeo llame al teléfono1-888-PHILIPS (744-5477)y tenga a mano el producto.(and Model / Serial number)(et model / serial nombre)(y número de model / serial)Register your product and get support atwww.philips.com/welcomepg001-024_DC912_37_Eng 2/27/08, 14:461
2.Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :– Relocate the receiving antenna.– Increase the separation between the equipment and receiver– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.IMPORTANT !modifications not authorized by the manufacturer may void users authority to operate this device.Nota : Este aparato ha sido probado y cumple con los límites correspondientes a un aparato digital de Clase B, según la parte 15 de las Normas FCC. Estos límites han sido diseñados para facilitar suficiente protección frente a interferencias perjudiciales en una instalación residencial. Este aparato genera, utiliza y puede emitir energía de frecuencias de radio y, si no se instala y utiliza según el manual de instrucciones, puede provocar interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que las interferencias no ocurrirán en una instalación particular. Si este aparato provoca interferencias perjudiciales en la recepción de radio o television, que se puede identificar encendiendo y apagando el aparato, recomendamos al usuario que intente solucionar las interferencias siguiendo una o más de las siguientes medidas: – Cambie la posición de la antena receptora.– Aumente la separación entre el aparato y el receptor.– Conecte el aparato a una toma de un circuito diferente al que está conectado el receptor.– Consulte con el distribuidor o un técnico de radio/TV con experiencia para que le ayuden.¡IMPORTANTE!modificações não autorizadas pelo fabricante, podem causar danos na operação deste aparelho.Remarque : Cet équipement a été testé et a été certifié conforme aux limites imposées pour un appareil numérique de Classe B, conformément à la partie 15 des réglements FCC. Ces limites sont définies aux fins d'assurer une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et émet des fréquences radio qui, en cas d'une mauvaise installation ou d'une utilisation non-conforme aux instructions de ce manuel d'utilisation peuvent causer des interférences nuisibles aux communications radio. Il n'y a toutefois aucune garantie que des interférences nuisibles ne se produiront pas dans une installation donnée. Si cet équipement cause des interférences nuisibles avec votre poste radio ou de télévision, ce que vous pouvez détermineren éteignant et en rallumant votre équipement, il est conseillé à l'utilisateur d'essayer de pallier à ces interférences nuisibles en prenant l'une ou l'autre des mesures suivantes:– Changez la position de l'antenne de réception.– Augmentez la séparation entre l'équipement et le récepteur.– Branchez l'équipement sur une source d'alimentation différente de celle sur laquelle le récepteur est branché.– Consultez votre distributeur ou un technicien qualifié en la matière pour assistance.IMPORTANTE !las modificaciones no autorizadas por el fabricante pueden anular la autoridad de los usuarios para utilizar este aparato.pg001-024_DC912_37_Eng 2/27/08, 14:462
3Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase.Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, sodon't miss out. Complete and return your Product Registration Card at once, or register online atwww.philips.com/welcome to ensure:Visit our World Wide Web Site at http://www.philips.com/welcomeCongratulations on your purchase,and welcome to the “family!”Dear PHILIPS product owner:Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today.We’ll doeverything in our power to keep you happywith your purchase for many years to come.As a member of the PHILIPS “family,” you’reentitled to protection by one of the mostcomprehensive warranties and outstandingservice networks in the industry.What’smore, your purchase guarantees you’llreceive all the information and special offersfor which you qualify, plus easy access toaccessories from our convenient homeshopping network.Most importantly, you can count on ouruncompromising commitment to your totalsatisfaction.All of this is our way of saying welcome -and thanks for investing in a PHILIPS prod-uct.P. S. To get the most from your PHILIPSpurchase, be sure to complete andreturn your Product Registration Cardat once, or register online at:www.philips.com/welcome*Proof of Purchase Returning the enclosed cardguarantees that your date ofpurchase will be on file, so noadditional paperwork will berequired from you to obtain warrranty service.*Product Safety Notification By registering your product,you'll receive notification -directly from the manufacturer- in the rare case of a productrecall or safety defect.*Additional Benefits Registering your product guar-antees that you'll receive all ofthe privileges to which you'reentitled, including specialmoney-saving offers.For Customer UseEnter below the Serial No. which is locatedon the rear of the cabinet. Retain thisinformation for future reference.Model No. __________________________Serial No. __________________________Know thesesafetysymbolsThis “bolt of lightning” indicates unin-sulated material within your unit maycause an electrical shock. For the safety ofeveryone in your household, please do notremove product covering.The “exclamation point” calls attentionto features for which you should readthe enclosed literature closely to preventoperating and maintenance problems.WARNING: To r educe the risk of fire orelectric shock, this apparatus should not beexposed to rain or moisture and objectsfilled with liquids, such as vases, should notbe placed on this apparatus.CAUTION: To prevent electric shock, matchwide blade of plug to wide slot, fully insert.ATTENTION:Pour éviter les choc élec-triques, introduire la lame la plus large de lafiche dans la borne correspondante de laprise et pousser jusqu’au fond.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.pg001-024_DC912_37_Eng 2/27/08, 14:463
4IMPORTANT SAFETY INSTRUCTIONSClass II equipment symbolThis symbol indicates that the unit has a double insulation system Clean only with dry cloth.Where the MAINS plug or an appliance coupler is used as the disconnet device, the disconnet device shall remain readily operable.materials9pg001-024_DC912_37_Eng 2/27/08, 14:464
5EnglishFrançaisEspañolDeutschIndexEnglish ------------------------------------------------ 6Français -------------------------------------------- 33Español --------------------------------------------- 60CanadaEnglish:This digital apparatus does not exceedthe Class B limits for radio noiseemissions from digital apparatus as setout in the Radio InterferenceRegulations of the CanadianDepartment of Communications.Français:Cet appareil numérique n'emet pas debruits radioélectriques dépassant leslimites applicables aux appareilsnumériques de Class B prescrites dansle Règlement sur le BrouillageRadioélectrique édicté par le Ministèredes Communications du Canada.CAUTIONUse of controls or adjustments orperformance of procedures otherthan herein may result in hazardousradiation exposure or other unsafeoperation.ATTENTIONL’utilisation des commandes ouréglages ou le non respect desprocédures ci-incluses peuvent setraduire par une expositiondangereuse à l’irradiation.ATENCIÓNEl uso de mando o ajustes o laejecucción de métodos que no seanlos aquí descritos puede ocasionarpeligro de exposición a radiación.Windows Media and the Windows logo aretrademarks, or registered trademarks ofMicrosoft Corporation in the United States and/or other countries.pg001-024_DC912_37_Eng 2/27/08, 14:465
6EnglishContentsGeneral InformationEnvironmental Information ................................ 7Supplied accessories ............................................ 7Safety Information ................................................ 7Hearing Safety ....................................................... 8PreparationsConnections ................................................... 9~10Connecting the wireless subwooferPower Antenna connection Optional connectionConnecting a USB mass storage device orSD/MMC memory cardConnecting other equipment to your systemMounting the set onto wall .............................. 11Using Remote Control ..................................... 11ControlsControls on the system .................................... 12Controls on the remote control .................... 13Basic FunctionsSwitching the system on ................................... 14Switching the system to standby mode ........ 14Switching the system to Eco Power Standbymode ..................................................................... 14Power Saving Automatic Standby .................... 14Adjusting volume and sound ............................ 14Radio ReceptionTuning to radio stations .................................... 15Programming radio stations ............................. 15Automatic programmingManual programmingTuning to preset radio stations ....................... 15USB/CardUsing a USB mass storage device/SD/MMCmemory card ................................................ 16~17Using playback features .............................. 17~18Basic playback controlsDifferent play modes: SHUFFLE and REPEATProgramming audio filesDock for iPodPlaying Apple iPod using DC910 ..................... 19 Compatible iPod player Dock adaptor Playing Apple iPodCharging iPod battery using the dock ........... 19AUXListening to an external source ...................... 20Clock/TimerClock setting ....................................................... 21Timer setting ....................................................... 21Sleep timer setting ............................................. 22Specifications ........................................... 23Maintenance.............................................. 23Tr oubleshooting ............................. 24~25pg001-024_DC912_37_Eng 2/27/08, 14:466
English7Congratulations on your purchase and welcometo Philips!To fully benefit from the support that Philipsoffers, register your product at www.philips.com/welcome.This set complies with the FCC rules,Part 15 and with 21 CFR 1040.10.Operation is subject to the following twoconditions:–This device may not cause harmfulinterference, and– This device must accept any interferencereceived, including interference that maycause undesired operation.Environmental InformationAll unnecessary packaging has been omitted. Wehave tried to make the packaging easy toseparate into three materials: cardboard (box),polystyrene foam (buffer) and polyethylene (bags,protective foam sheet).Your system consists of materials which can berecycled and reused if disassembled by aspecialized company. Please observe the localregulations regarding the disposal of packagingmaterials, exhausted batteries and oldequipment.Supplied accessories– remote control with 1 CR2025 battery–4 X iPod dock adaptors–(Input: 100- 240V ~ 50/60Hz 1.6 A,Output: 29.0V 2.5A; manufacturer: Philips;model No.: PAT075A29UL)–1 x AUX cable–Mounting kit (2 dowels and 2 screws)Safety Information●Before operating the system, check that theoperating voltage indicated on the typeplate ofyour system is identical with the voltage of yourlocal power supply. If not, please consult yourdealer.●Where the MAINS plug or an appliance coupleris used as the disconnet device, the disconnectdevice shall remain readily operable.General Information●Place the system on a flat, hard and stablesurface.●Place the system in a location with adequateventilation to prevent internal heat build-up inyour system. Allow at least 10 cm (4 inches)clearance from the rear and the top of the unitand 5 cm (2 inches) from each side.●The ventilation should not be impeded bycovering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc.●Do not expose the system, batteries or discs toexcessive moisture, rain, sand or heat sourcescaused by heating equipment or direct sunlight.●No naked flame sources, such as lighted candles,should be placed on the apparatus.●No objects filled with liquids, such as vases, shallbe placed on the apparatus.●Install this unit near the AC outlet and where theAC power plug can be reached easily.●The apparatus shall not be exposed to drippingor splashing.●Excessive sound pressure from earphones andheadphones can cause hearing loss.●Battery shall not be exposed to excessive heatsuch as sunshine, fire or the like.●If the system is brought directly from a cold to awarm location, or is placed in a very damp room,moisture may condense on the lens of the discunit inside the system. Should this occur, the CDplayer would not operate normally. Leave thepower on for about one hour with no disc in thesystem until normal playback is possible.●The mechanical parts of the set contain self-lubricating bearings and must not be oiled orlubricated.●Batteries (battery pack or batteries installed)shall not be exposed to excessive heat such assunshine, fire or the like.●When the system is switched to Standbymode, it is still consuming some power.To disconnect the system from thepower supply completely, remove the ACpower plug from the wall socket.pg001-024_DC912_37_Eng 2/27/08, 14:467
8EnglishGeneral InformationHearing SafetyListen at a moderate volume.●Using headphones at a high volume can impairyour hearing. This product can produce soundsin decibel ranges that may cause hearing loss fora normal person, even for exposure less than aminute. The higher decibel ranges are offeredfor those that may have already experiencedsome hearing loss.●Sound can be deceiving. Over time your hearing"comfort level" adapts to higher volumes ofsound. So after prolonged listening, what sounds"normal" can actually be loud and harmful toyour hearing. To guard against this, set yourvolume to a safe level before your hearingadapts and leave it there.To establish a safe volume level:●Set your volume control at a low setting.●Slowly increase the sound until you can hear itcomfortably and clearly, without distortion.Listen for reasonable periods of time:●Prolonged exposure to sound, even at normally"safe" levels, can also cause hearing loss.●Be sure to use your equipment reasonably andtake appropriate breaks.Be sure to observe the followingguidelines when using your headphones.●Listen at reasonable volumes for reasonableperiods of time.●Be careful not to adjust the volume as yourhearing adapts.●Do not turn up the volume so high that youcan't hear what's around you.●You should use caution or temporarilydiscontinue use in potentially hazardoussituations.●Do not use headphones while operating amotorized vehicle, cycling, skateboarding, etc.; itmay create a traffic hazard and is illegal in manyareas.pg001-024_DC912_37_Eng 2/27/08, 14:468
English9BConnecting the wireless subwoofer1Place the subwoofer on the floor near an ACoutlet.2Connect the power cord of the subwoofer tothe AC outlet.3Power on both the main set and subwoofer.➜Wireless connection will set up automatically.In case the wireless connection fails dueto conflict or strong interference etc.,you may need the following proceduresfor manual pairing:1In standby mode, press and hold 2; on the setfor three seconds.➜“PAIRING” flashes on the display screen.PreparationsConnectionsThe type plate is located at the bottom ofthe system.APower●Before connecting the AC power adaptor to thewall outlet, ensure that all other connectionshave been made.●DC jack is located at the bottom panel of theset.WARNING!–Use the supplied AC power adaptor only!Using any other power connection devicemay damage your main set!–For optimal performance, use only theoriginal AC power adaptor.–Never make or change connections withthe power switched on.To avoid overheating of the system, a safetycircuit has been built in. Therefore, yoursystem may switch to Standby modeautomatically under extreme conditions. Ifthis happens, let the system cool downbefore reusing it (not available for all versions).POWERFUL BASSPOWERFUL BASSpg001-024_DC912_37_Eng 2/27/08, 14:469
10EnglishPreparations2Press and hold the PAIR button on the rear ofthe subwoofer for three seconds.➜The LED indicator on the subwoofer flashes.●If the connection succeeds, the display shows“PAIR OK”.●If the connection fails or the connection cannotbe set up successfully within 60 seconds, thedisplay shows “PAIR FAIL”.Notes:– The wireless connection will be disconnectedautomatically after power-off.– See “Basic Functions - Switching the system toEco Power Standby mode” for how to switchbetween Eco Power Standby mode and standbymode.CAntenna ConnectionFM AntennaIt is unnecessary to connect the FM pigtailantenna since it is fixed to the main unit.●Adjust the FM antenna for optimal FM stereoreception.DOptional connectionThe optional equipment and connecting cords arenot supplied. Refer to the operating instructionsof the connected equipment for details.Connecting a USB mass storage deviceor SD/MMC memory cardBy connecting a USB mass storage device or SD/MMC memory card to the Hi-Fi system, you canenjoy the device's or card’s stored music throughthe powerful speakers of the Hi-Fi system.●Insert the USB device's USB plug into the socket on the set.ORfor the devices with USB cables:1Insert one plug of the USB cable (not supplied)to the socket on the set.2Insert the other plug of the USB cable to theUSB output terminal of the USB device.ORfor the memory card:●Fully insert the memory card (metal contactfacing left) into the SD / MMC slot on the topof the system.Connecting other equipment to yoursystemThis feature allows you to listen to music fromthe external equipment throught the powrfulspeakers of the Hi-Fi system.●Use an Aux-in cable (supplied) to connect theAUX IN-1 or AUX-2 jack (3.5mm, located onthe bottom panel) to an AUDIO OUT orheadphone jack on an external device (such asTV, Laser Disc player, DVD player or CDrecorder).Note:– Refer to the operating instructions for theconnected equipment for details.pg001-024_DC912_37_Eng 2/27/08, 14:4610
English11Mounting the set onto wallSee the separate sheet of Wall mountinginstructions on how to mount the set onto wall.Note:–To secure the mounting on wall, cement wall isrequired.Using Remote ControlIMPORTANT!–Before using the remote control,remove the insulation plastic tab asshown in the picture below.–If the remote control does notfunction correctly or the operating rangeis reduced, replace the battery with anew (CR2025) battery.1Push to open the battery tray.2Replace a new battery according to theindicated polarity.3Push the battery tray back to close it.Using the Remote Control to operatethe Player1Aim the Remote Control directly at the remotesensor (IR) on the front panel.2Select the source you wish to control bypressing one of the source select buttons on theremote.3Then select the desired function (for example,ÉÅ, ¡ or ™).CAUTION!–Remove battery if it is exhausted or willnot be used for a long time.–Battery contains chemical substances, sothey should be disposed of properly.–Perchlorate Material-special handlingmay apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.Preparationspg001-024_DC912_37_Eng 2/27/08, 14:4611
12EnglishControlsControls on the system1SD / MMC–is the slot used to insert an SD/MMC memorycard.2USB port – jack for the external USB mass storage device.3iPod dock–is used to dock your iPod player for playback orrecharging through this system.4POWER–switches the system on or to Eco Powerstandby/normal standby with clock display.5SOURCE–selects the respective sound source for TUNER(FM)/iPod/USB/CARD (SD/MMC)/AUX.6PRESET +/-–(for USB/CARD) skips to the beginning of acurrent/previous/subsequent album.– selects a preset radio station.DBB (Dynamic Bass Boost)–enables or disables bass enhancement. (in USB/Tuner mode, hold down then release to select)DSC (Digital Sound Control)– selects different types of preset sound equalizersettings. (in USB/Tuner mode, hold down thenrelease to select)7VOLUME +/-–adjusts the volume level.–adjusts the hours and minutes for the clock/timerfunction.–switches between 12 hour and 24 hour dispaly.8S/Tfor USB/CARD/iPod................................. fast searches back and forwardwithin a track (press and hold).................................. skips to the beginning of acurrent/previous/subsequenttrack.for TUNER ........ tunes to radio stations (down/up).9 ÉÅ–starts or interrupts playback.34567892 1pg001-024_DC912_37_Eng 2/27/08, 14:4612
English13Controls 1$#@!098234567Controls on the remote control1POWER–switches the system on or to Eco Powerstandby/normal standby with clock display.2MENU–is equivalent to the MENU button on your iPodplayer.3USB/SD– swicthes between USB and SD mode.4SHUFFLE/REPEATfor USB/CARD................................. selects a repeat playback mode.................................. plays USB/CARD tracksrandomly.5ALBUM/PRESET 3 / 4–(for USB/CARD) skips to the beginning of acurrent/previous/subsequent album.– selects a preset radio station.6SLEEP–selects the sleeper time.7TIMER–sets the timer function.8MUTE– interrupts and resumes sound production.9SET TIME /VOL +/-–adjusts the volume level.–adjusts the hours and minutes for the clock/timerfunction.0PROG/SET TIME–(for USB/CARD) programs tracks.–(for TUNER) programs radio stations.–sets the clock function.!AUX–selects AUX mode.@ÉÅ–starts or interrupts playback.– confirms a selection (for iPod menu operationonly).TUNING +/-for TUNER ........ tunes to radio stations (down/up).–Navigates the iPod menu.S/Tfor USB/CARD/iPod................................. fast searches back and forwardwithin a track (press and hold).................................. skips to the beginning of acurrent/previous/subsequenttrack.#TUNER–selects the tuner source$iPod– selects the iPod source.Notes for remote control:–First select the source you wish tocontrol by pressing one of the source selectkeys on the remote control (for exampleiPod, TUNER).–Then select the desired function (forexample ÉÅ,S , T ).pg001-024_DC912_37_Eng 2/27/08, 14:4613
14EnglishBasic FunctionsSwitching the system on●Press POWER.➜The system will switch to the last selectedsource.●Press SOURCE on the set or iPod, TUNER,USB/CARD or AUX on the remote control.➜The system will switch to the selected source.Switching the system to standbymode●Press POWER.➜The backlight for clock display is dim in standby.➜The volume level (up to a maximum volumelevel of 12), interactive sound settings, lastselected mode (ECO Power Standby or normalstandby), source and tuner presets will beretained in the player's memory.Switching the system to EcoPower Standby mode●Press and hold POWER for more than 2seconds.➜The backlight will go blank.Power Saving Automatic StandbyAs a power-saving feature, the systemautomatically switches to Eco Power/ Standby 15minutes after playback has reached the end andno control is operated.Adjusting volume and sound1Press VOLUME +/- on the system (or VOL +/-on the remote control) to decrease or increasethe volume.➜Display shows the volume level VOL and anumber from 0, 1, 2, ...32.2 In USB/Tuner mode, press and hold DSC on theset, then release to select a sound effect: ROCK/POP/JAZZ/CLASSIC.●In iPod /AUX mode, simply press DSC on theset to select the desired sound effect.3 In USB/Tuner mode, press and hold DBB on theset, then release to switch bass enhancement onor off.●In iPod /AUX mode, simply press DBB on theset to switch bass enhancement on or off.➜If the DBB is activated, DBB ON is shown.➜If the DBB is deactivated, DBB OFF is shown.4Press MUTE on the remote control tointerrupt sound reproduction instantly.➜Playback will continue without sound andMUTE will flash on the display.●To activate sound reproduction you can:– press MUTE on the remote control again;–adjust the volume controls;–change source. pg001-024_DC912_37_Eng 2/27/08, 14:4614
English15Radio ReceptionTuning to radio stations1Press SOURCE repeatedly (or TUNER on theremote control) to select the tuner source (FM).2Hold S/T on the system (or TUNING +/-on the remote control) and then release thebutton.➜The system will start searching for a radiostation with sufficient signal strength.3Repeat step 2 if necessary until you find thedesired station.●To tune to a weak station, press S/T onthe system (or TUNING +/- on the remotecontrol) briefly and repeatedly until you havefound optimal reception.Programming radio stationsYou can store up to a total of 40 radio stations(40 FM) in the memory.Automatic programmingAutomatic programming will start with a chosenpreset number. From this preset numberupwards, former programmed radio stations willbe overridden.1Press PRESET +/- on the system (or ALBUM/PRESET 3 / 4 on the remote control) toselect the preset number where programmingshould start.Note:–If no preset number is selected, default is preset(1) and all your presets will be overridden.2Press PROG on the remote control for morethan two seconds to activate programming.➜All available stations are programmed.Manual programming1Tune to your desired station (refer to “Tuning toradio stations”).2Press PROG on the remote control to activateprogramming.➜PROG appears in the display.3Press PRESET +/- on the system (or ALBUM/PRESET 3 / 4 on the remote control) toallocate a number from 1 to 40 to this station.4Press PROG on the remote control again toconfirm the setting.➜PROG disappears, the preset number andthe frequency of the preset station are shown.5Repeat the above four steps to store otherstations.●You can override a preset station by storinganother frequency in its place.Tuning to preset radio stations●Press PRESET +/- on the system (or ALBUM/PRESET 3 / 4 on the remote control) untilthe desired preset station is displayed. pg001-024_DC912_37_Eng 2/27/08, 14:4615
16EnglishUSB/CardUsing a USB mass storagedevice/SD/MMC memory cardBy connecting a USB mass storage device or SD/MMC memory card to the Hi-Fi system, you canenjoy the device's or card’s stored music throughthe powerful speakers of Hi-Fi system.Playing a USB mass storage device/SD/MMC memory cardCompatible mass storage devices/cardsWith the Hi-Fi system, you can use:–USB flash memory (USB 2.0 or USB1.1)– USB flash players (USB 2.0 or USB1.1)–SD/MMC memory cardsNotes:–In some USB flash players (or memory devices),the stored contents are recorded using copyrightprotection technology. Such protected contents willbe unplayable on any other devices (such as thisHi-Fi system).–Compatibility of the USB connection on thisproduct:a) This product supports most USB Mass storagedevices (MSD) that are compliant to the USBMSD standards.i) Most common Mass storage class devices areflash drives, memory sticks, jump drives and etc.ii) If you see a "Disc Drive" show up on yourcomputer after you plugged the mass storagedevice into your computer, most likely it is MSDcompliant and it will work with this product.b) If your Mass storage device required a battery/power source. Please make sure you have a freshbattery in it or charge the USB device first andthen plug it into the product again.–Supported Music type:a) This device only supports unprotected musicwith the following file extension:.mp3.wmab) Music bought from on-line music stores are notsupported because they are secured by DigitalRights Management protection (DRM).c) File name extensions that end with thefollowing are not supported:.wav; .m4a; .m4p; mp4; .aac and etc.–No Direct connection can be made fromComputer USB port to the product even you haveeither or both mp3 or wma files in your computer.Supported formats:–USB or memory file format FAT12, FAT16,FAT32 (sector size: 512 bytes)–MP3 bit rate (data rate): 32-320 Kbps andvariable bit rate–WMA v9 or earlier– Directory nesting up to a maximum of 8levels–Number of albums/ folders: maximum 99– Number of tracks/titles: maximum 400–ID3 tag v2.0 or later–File name in Unicode UTF8 (maximum length:128 bytes)The system will not play or support thefollowing:– Empty albums: an empty album is an albumthat does not contain MP3/WMA files, andwill not be shown in the display.–Non-supported file formats are skipped. Thismeans that e.g.: Word documents .doc orMP3 files with extension .dlf are ignored andwill not be played.–AAC , WAV, PCM audio files–DRM protected WMA files–WMA files in Lossless formatpg001-024_DC912_37_Eng 2/27/08, 14:4616
English17USB/CardHow to transfer music files from PC to aUSB mass storage device/SD/MMCmemory cardBy dragging and dropping music files, you caneasily transfer your favorite music from PC to aUSB mass storage device/SD/MMC memorycard.For a flash player, you can also use its musicmanagement software for the music transfer.However, those WMA files may beunplayable for compatibility reasons.How to organize your MP3/WMA files onthe USB mass storage device/SD/MMCmemory cardThis Hi-Fi system will browse the MP3/WMAfiles in the folders/sub-folders/titles order.Example: Root Title 001 Title 002 Title 003 Album 01 Title 001 Title 002 Title 003 Album 02 Title 001 Title 002 Title 003 Album 03 Title 001 Title 002 Title 003Organize your MP3/WMA files in differentfolders or subfolders as required.Notes:–If you have not organized MP3/WMA files intoany albums on your disc, an album "01" will beautomatically assigned for all those files.– Make sure that the file names of MP3 files endwith .mp3. and the file names of WMA files endwith .wma.–For DRM protected WMA files, use WindowsMedia Player 10 (or later) for conversion. Visitwww.microsoft.com for details about WindowsMedia Player and WM DRM (Windows MediaDigital Rights Management).1Check the USB device/SD/MMC memory cardhas been properly connected. (See”Preparations: Connecting a USB mass storagedevice or SD/MMC memory card”).2Press SOURCE on the system (USB/CARDon the remote) once or more to select USB/CARD.➜NO AUDIO appears if no audio file is foundin the USB device/SD/MMC memory card.3Play the available audio files using playbackbuttons on the set or remote control (such as2;, S/T).Using playback featuresBasic playback controlsTo play a disc●Press ÉÅ to start playback.To interrupt playback●Press 2; during playback.➜To resume, press 2; again.To select a different track●Press S/T once or repeatedly until thedesired track number appears in the display.●For MP3/WMA, you may press PRESET +/- onthe system (or ALBUM/PRESET 3 / 4 onthe remote control) to select a desired album,then select your desired track.To find a passage within a track1Press and hold down on S/T .➜The file is played at high speed and lowvolume.pg001-024_DC912_37_Eng 2/27/08, 14:4617
18EnglishUSB/CardDifferent play modes: SHUFFLE andREPEATYou can select and change the various playmodes before or during playback. The playmodes can also be combined withPROGRAMME.SHUF ................ all the audio files are played inrandom orderREP ALL ........... repeats all the audio files/programmeREP ................... plays the current audio filecontinuously1To select your play mode, press SHUFFLE/REPEAT on the remote control before orduring playback until the display shows thedesired function.2Press 2; to start playback if in the STOPposition.➜If you have selected SHUFFLE, playback startsautomatically.3To return to normal playback, press SHUFFLE/ REPEAT on the remote control until thevarious SHUFFLE/ REPEAT modes are no longerdisplayed.Note:– The SHUFFLE and REPEAT functions cannot beused simultaneously.Programming audio filesProgramme in the STOP position to select andstore your audio files in the desired sequence. Ifyou like, store any track more than once. Up to40 audio files can be stored in the memory.1In the stop position, use the S/T to selectyour desired track number.●For MP3/WMA, you may press PRESET +/- onthe system (or ALBUM/PRESET 3 / 4 onthe remote control) to select a desired album,then select your desired track.2Press PROG on the remote control to store.➜Display: PROG flashes, and PR 01 is displayedbriefly, then the selected track number (and theselected album number for MP3).3Repeat steps 1-2 to select and store all desiredtracks.➜PROGRAM FULL is displayed if you attemptto programme more than 40 tracks.4To start playback of your programme, press 2;.5To stop playback, press and hold PROG.To review the programme● Stop playback and press and hold PROG.➜the programmed files are displayed one byone.To delete the programme● Press PROG twice in the STOP mode;● Press PROG three times during playback.Note:–For compatibility reasons, the album/trackinformation may differ from what it is displayedthrough flash players' music management software.pg001-024_DC912_37_Eng 2/27/08, 14:4618
English19Playing Apple iPod1Correctly place the iPod in the dock.2Press repeatedly SOURCE on the main unit(or iPod on the remote control) .3Power on your iPod.4Select and playback your favourite song/video/photo on the iPod.Notes:– Using the following buttons only ( 2;, S / T ,VOLUME and MUTE ) on the DC910 and itsremote control, you can control some iPod playbackfeatures, such as, Play/Pause, selecting next/previous track, fast forwarding/rewinding andchanging volume.– You may also use TUNING +/- and ÉÅonthe remote control to navigate the iPod menu andconfirm a selection.Charging iPod battery using thedockIn normal standby or power-on mode, you cancharge the iPod while docking.Note:– iPod charging is not available in ECO powerstandby mode.DOCK for iPodPlaying Apple iPod using DC910The set is equipped with a dock for iPod. Byconnecting Apple iPod to the set, you can listento the sound of the docked iPod through thepowerful speakers of the Hi-Fi system and viewthe iPod video (if available).Compatible iPod player●Apple iPod models with 30-pin dock connectoras follows:20GB, 40GB, 20/30GB Photo, 40/60GB Photo,30GB Video, 60GB/80 Video, Mini, Nano 1st /2nd/3rd generation, iPod 5th generation (video),iPod touch and iPod classic.●iPod Shuffle is not supported.Dock adaptorBefore plugging your player in the dock, snap thesuitable dock adaptor (supplied) into the dock toprovide a snug fit for the player to be docked.Selecting the correct dock adaptor●4 iPod dock adaptors are included. Each adaptorhas indication to match different iPod types.Installing the dock adaptor1As shown below, align the slots of the dock andlatches of the adaptor, then slide in the adaptor.Removing the dock adaptor1As shown, slide the adaptor up to take it out.pg001-024_DC912_37_Eng 2/27/08, 14:4619
20EnglishAUXListening to an external sourceThis feature allows you to listen to music fromthe external equipment throught the powrfulspeakers of the Hi-Fi system.1Use an Aux-in cable (supplied) to connect theAUX 1 or AUX 2 jack (3.5mm, located on thebottom panel) to an AUDIO OUT orheadphone jack on an external device (such asTV, Laser Disc player, DVD player or CDrecorder).2Press SOURCE on the system repeatedly (orAUX on the remote control) to select “AUX 1”or “AUX 2”.Note:– Refer to the operating instructions for theconnected equipment for details.pg001-024_DC912_37_Eng 2/27/08, 14:4620
English21Clock/Timer Clock settingThe clock can be set in either 12-hour or24-hour mode (12HR or 24HR for example).1In standby mode, press and hold PROG/SETTIME on the remote control.2Press VOLUME+/- to switch between 12 hourand 24 hour display.3Press VOLUME+/- again to confirm.➜The clock digits flash on the display panel.➜If the clock has not been set, "--: --" flashes4Press VOL UME +/- on the system (orVOL +/- on the remote control) to set thehours.5Press PROG/SET TIME on the remotecontrol again.➜The clock digits for the minutes flash.6Press VOL UME +/- on the system (orVOL +/- on the remote control) to set theminutes.7Press PROG/SET TIME on the remotecontrol to confirm the time.Timer setting●The system can be used as an alarm clock,whereby the TUNER (FM)/iPod/USB/CARD(SD/MMC) is switched on at a set time (onetime operation). The clock time needs to be setfirst before the timer can be used.●During setting, if no button is pressed within 90seconds, the system will exit timer setting modeautomatically.1In standby mode, press TIMER for more thantwo seconds.2Press SOURCE on the system repeatedly (orthe respective source keys on the remotecontrol) to select the sound source.➜“SELECT SOURCE” is displayed.3Press TIMER to confirm your desired mode.➜The clock digits for the hours flash.4Press VOL UME +/- on the system (orVOL +/- on the remote control) to set thehours.5Press TIMER again.➜The clock digits for the minutes flash.6Press VOL UME +/- on the system (orVOL +/- on the remote control) to set theminutes.7Press TIMER to confirm the time.➜The timer is now set and activated.Activating and deactivating timer●In standby or during playback, press TIMERonce on the remote control.➜Display shows if activated, and disappears ifdeactivated.pg001-024_DC912_37_Eng 2/27/08, 14:4621
22EnglishSleep timer settingThe sleep timer enables the system to switch offby itself after a set period of time.1In power on mode, press SLEEP on the remotecontrol repeatedly to select a preset time.➜The selections are as follows (time inminutes): 60 ™ 45 ™ 30 ™ 15 ™ 0 ™ 60 …➜"SLEEP XX" is displayed. "XX" is the time inminutes.➜"SLEEP" is displayed if the sleep time youhave selected is not 0.2When you reach the desired length of time, stoppressing the SLEEP button.To deactivate the sleep timer●Press SLEEP repeatedly until "0" is displayed, orpress POWER.Clock/Timerpg001-024_DC912_37_Eng 2/27/08, 14:4622
English23Cleaning the Cabinet●Use a soft cloth slightly moistened with a milddetergent solution. Do not use a solutioncontaining alcohol, spirits, ammonia or abrasives.MaintenanceSpecificationsAMPLIFIEROutput power ....................................... 2 x 15 W RMSSignal-to-noise ratio ....................................... ≥ 70 dBAFrequency response ...... 20 Hz – 20 KHz, ± 3 dB(Subwoofer). ............................................... 50 - 180HzInput sensitivity AUX ....................... 0.5 V (max. 2 V)Impedance loudspeakers ......................................... 4 ΩImpedance headphones ........................................ 32 ΩOutput power headphones ....................... <50 mWTUNERFM wave range ................................... 87.5 – 108 MHzAntennaFM ....................................................................... 75 Ω wireUSB PLAYER/SD/MMC CARDUSB ................................................................... 12Mb/s, V1.1......................................... support MP3 and WMA filesNumber of albums/folders ................. maximum 99Number of tracks/titles ...................... maximum 400GENERAL INFORMATIONAC Power ................................. 100 – 240 V, 50/60 HzDimensions (w x h x d) . 210 x 200 x 567 (mm)Weight .............................................................................. 3 kgStandby power consumption ............................ <7 WEco power standby ................................................. <1 WSpecifications and external appearance aresubject to change without notice.pg001-024_DC912_37_Eng 2/27/08, 14:4623
24EnglishTroubleshootingWARNINGUnder no circumstances should you try to repair the system yourself, as this will invalidate thewarranty. Do not open the system as there is a risk of electric shock.If a fault occurs, first check the points listed below before taking the system for repair. If youare unable to remedy a problem by following these hints, consult your dealer or Philips forhelp.Radio reception is poor.The system does not react when buttonsare pressed.Sound cannot be heard or is of poorquality.The remote control does not functionproperly.The timer is not working.The Clock/Timer setting is erased.Some files on the USB device are notdisplayed.“DEVICE NOT SUPPORTED” scrolls on thedisplay.✔If the signal is too weak, adjust the antenna orconnect an external antenna for betterreception.✔Increase the distance between the Micro HiFiSystem and your TV or VCR.✔Remove and reconnect the AC power plug andswitch on the system again.✔Adjust the volume.✔Select the source (iPod or TUNER, for example)before pressing the function button (ÉÅ, 5 /6).✔Reduce the distance between the remotecontrol and the system.✔Insert the battery with its polarities(+/– signs) aligned as indicated.✔Replace the battery.✔Point the remote control directly towardIR sensor on the front of the system.✔Set the clock correctly.✔Switch on the timer.✔Power has been interrupted or the power cordhas been disconnected. Reset the clock/timer.✔Check if the number of folders exceeds 99 orthe number of titles exceeds 400.✔Remove the USB mass storage device or selectanother source.Problem Solutionpg001-024_DC912_37_Eng 2/27/08, 14:4624
English25Wireless connection with the subwooferfails✔Ensure that the subwoofer is powered on.✔The distance between the main set andsubwoofer may exceed the maximum range ofwireless communication. Move the subwoofercloser to the main set.✔Obstacles may exist between the main set andsubwoofer. Remove the obstacles.✔Strong interference may exist. Ensure there is nostrong interference that may impair thecommunication between the main set andsubwoofer.✔If the problem remains, see “Preparations -Connecting the wireless subwoofer” for manualpairing.Problem SolutionTr oubleshootingpg001-024_DC912_37_Eng 2/27/08, 14:4625
26Philips, P.O. Box 671539, Marietta, GA. 30006-0026PHILIPS LIMITED WARRANTYONE (1) YEARWARRANTY COVERAGE:PHILIPS warranty obligation is limited to the terms set forthbelow.WHO IS COVERED: Philips warrants the product to the original purchaser or the per-son receiving the product as a gift against defects in materials andworkmanship as based on the date of original purchase(“Warranty Period”) from an Authorized Dealer. The originalsales receipt showing the product name and the purchase datefrom an authorized retailer is considered such proof. WHAT IS COVERED:The Philips warranty covers new products if a defect in materialor workmanship occurs and a valid claim is received by Philipswithin the Warranty Period. At its option, Philips will either (1)repair the product at no charge, using new or refurbishedreplacement parts, or (2) exchange the product with a productthat is new or which has been manufactured from new, or ser-viceable used parts and is at least functionally equivalent or mostcomparable to the original product in Philips current inventory,or (3) refund the original purchase price of the product.Philips warrants replacement products or parts provided underthis warranty against defects in materials and workmanship fromthe date of the replacement or repair for ninety (90) days or forthe remaining portion of the original product’s warranty,whichever provides longer coverage for you. When a product orpart is exchanged, any replacement item becomes your propertyand the replaced item becomes Philips’ property. When a refundis given, your product becomes Philips’ property. Note: Any product sold and identified as refurbished orrenewed carries a ninety (90) day limited warranty.Replacement product can only be sent if all warrantyrequirements are met. Failure to follow all requirementscan result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-TATIONS:This Limited Warranty applies only to the new products manu-factured by or for Philips that can be identified by the trademark,trade name, or logo affixed to it. This Limited Warranty does notapply to any non-Philips hardware product or any software, evenif packaged or sold with the product. Non-Philips manufacturers,suppliers, or publishers may provide a separate warranty for theirown products packaged with the bundled product. Philips is not liable for any damage to or loss of any programs,data, or other information stored on any media contained withinthe product, or any non-Philips product or part not covered bythis warranty. Recovery or reinstallation of programs, data orother information is not covered under this Limited Warranty.This warranty does not apply (a) to damage caused by accident,abuse, misuse, neglect, misapplication, or non-Philips product, (b)to damage caused by service performed by anyone other thanPhilips or Philips Authorized Service Location, (c) to a product ora part that has been modified without the written permission ofPhilips, or (d) if any Philips serial number has been removed ordefaced, or (e) product, accessories or consumables sold “AS IS”without warranty of any kind by including refurbished Philipsproduct sold “AS IS” by some retailers.This Limited Warranty does not cover:•Shipping charges to return defective product to Philips. •Labor charges for installation or setup of the product, adjust-ment of customer controls on the product, and installation orrepair of antenna/signal source systems outside of the product.•Product repair and/or part replacement because of improperinstallation or maintenance, connections to improper voltagesupply, power line surge, lightning damage, retained images orscreen markings resulting from viewing fixed stationary con-tent for extended periods, product cosmetic appearance itemsdue to normal wear and tear, unauthorized repair or othercause not within the control of Philips.•Damage or claims for products not being available for use, orfor lost data or lost software.•Damage from mishandled shipments or transit accidents whenreturning product to Philips.•A product that requires modification or adaptation to enableit to operate in any country other than the country for whichit was designed, manufactured, approved and/or authorized, orrepair of products damaged by these modifications. •A product used for commercial or institutional purposes(including but not limited to rental purposes).•Product lost in shipment and no signature verification receiptcan be provided.•Failure to operate per Owner’s Manual.TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTORICO, OR U.S. VIRGIN ISLANDS…Contact Philips Customer Care Center at:1-888-PHILIPS (1-888-744-5477)TO OBTAIN ASSISTANCE IN CANADA…1-800-661-6162 (French Speaking)1-888-PHILIPS (1-888-744-5477) - (English or Spanish Speaking)REPAIR OR REPLACEMENT AS PROVIDED UNDER THISWARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLELAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY ORFITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCTIS LIMITED IN DURATION TO THE DURATION OF THISWARRANTY. Some states do not allow the exclusions or limitation of inciden-tal or consequential damages, or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions maynot apply to you.This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.3121 233 48802pg001-024_DC912_37_Eng 2/27/08, 14:4626

Navigation menu