Philips Consumer Lifestyle DC912V37MU Docking Entertainment System Main Unit User Manual pg001 024 DC912 37 Eng
Philips Consumer Lifestyle Docking Entertainment System Main Unit pg001 024 DC912 37 Eng
User Manua
Docking Entertainment System DC912
Thank you for choosing Philips.
Need help fast?
Read your Quick Start Guide and/or
User Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
www.philips.com/welcome
or call
1-888-PHILIPS (744-5477)
while with your product.
Philips vous remercie de
votre confiance.
Besoin d'une aide
rapide?
Le Guide rapide de début
et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
www.philips.com/welcome
ou formez le
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477) (English speaking)
Veillez à avoir votre produit à
portée de main.
Gracias por escoger Philips
Necesita ayuda
inmediata?
Lea primero la Guía rápida del comienzo
o el Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
asistencia en línea en
www.philips.com/welcome
o llame al teléfono
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
(and Model / Serial number)
(et model / serial nombre)
(y número de model / serial)
Register your product and get support at
www.philips.com/welcome
pg001-024_DC912_37_Eng 2/27/08, 14:461
2
.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures :
– Relocate the receiving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT !
modifications not authorized by the manufacturer may void users authority to operate this device.
Nota : Este aparato ha sido probado y cumple con los límites correspondientes a un aparato digital de Clase
B, según la parte 15 de las Normas FCC. Estos límites han sido diseñados para facilitar suficiente protección
frente a interferencias perjudiciales en una instalación residencial. Este aparato genera, utiliza y puede emitir
energía de frecuencias de radio y, si no se instala y utiliza según el manual de instrucciones, puede provocar
interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que las
interferencias no ocurrirán en una instalación particular. Si este aparato provoca interferencias perjudiciales en
la recepción de radio o television, que se puede identificar encendiendo y apagando el aparato,
recomendamos al usuario que intente solucionar las interferencias siguiendo una o más de las siguientes
medidas:
– Cambie la posición de la antena receptora.
– Aumente la separación entre el aparato y el receptor.
– Conecte el aparato a una toma de un circuito diferente al que está conectado el receptor.
– Consulte con el distribuidor o un técnico de radio/TV con experiencia para que le ayuden.
¡IMPORTANTE!
modificações não autorizadas pelo fabricante, podem causar danos na operação deste aparelho.
Remarque : Cet équipement a été testé et a été certifié conforme aux limites imposées pour un
appareil numérique de Classe B, conformément à la partie 15 des réglements FCC. Ces limites sont
définies aux fins d'assurer une protection raisonnable contre les interférences nuisibles dans une
installation résidentielle. Cet équipement génère, utilise et émet des fréquences radio qui, en cas d'une
mauvaise installation ou d'une utilisation non-conforme aux instructions de ce manuel d'utilisation
peuvent causer des interférences nuisibles aux communications radio. Il n'y a toutefois aucune garantie
que des interférences nuisibles ne se produiront pas dans une installation donnée. Si cet équipement
cause des interférences nuisibles avec votre poste radio ou de télévision, ce que vous pouvez déterminer
en éteignant et en rallumant votre équipement, il est conseillé à l'utilisateur d'essayer de pallier à ces
interférences nuisibles en prenant l'une ou l'autre des mesures suivantes:
– Changez la position de l'antenne de réception.
– Augmentez la séparation entre l'équipement et le récepteur.
– Branchez l'équipement sur une source d'alimentation différente de celle sur laquelle le récepteur est
branché.
– Consultez votre distributeur ou un technicien qualifié en la matière pour assistance.
IMPORTANTE !
las modificaciones no autorizadas por el fabricante pueden anular la autoridad de los usuarios para
utilizar este aparato.
pg001-024_DC912_37_Eng 2/27/08, 14:462
3
Return your Product Registration Card or register online at
www.philips.com/welcome today to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once, or register online at
www.philips.com/welcome to ensure:
Visit our World Wide Web Site at http://www.philips.com/welcome
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.
You’ve selected one of the best-built, best-
backed products available today.We’ll do
everything in our power to keep you happy
with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding
service networks in the industry.What’s
more, your purchase guarantees you’ll
receive all the information and special offers
for which you qualify, plus easy access to
accessories from our convenient home
shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome -
and thanks for investing in a PHILIPS prod-
uct.
P. S. To get the most from your PHILIPS
purchase, be sure to complete and
return your Product Registration Card
at once, or register online at:
www.philips.com/welcome
*Proof of Purchase
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain
warrranty service.
*Product Safety
Notification
By registering your product,
you'll receive notification -
directly from the manufacturer
- in the rare case of a product
recall or safety defect.
*Additional Benefits
Registering your product guar-
antees that you'll receive all of
the privileges to which you're
entitled, including special
money-saving offers.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No. __________________________
Serial No. __________________________
Know these
safetysymbols
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To r educe the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
ATTENTION:Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
pg001-024_DC912_37_Eng 2/27/08, 14:463
4
IMPORTANT SAFETY INSTRUCTIONS
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
Clean only with dry cloth.
Where the MAINS plug or an appliance
coupler is used as the disconnet device,
the disconnet device shall remain
readily operable.
materials
9
pg001-024_DC912_37_Eng 2/27/08, 14:464
5
English
Français
EspañolDeutsch
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 33
Español --------------------------------------------- 60
Canada
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas de
bruits radioélectriques dépassant les
limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L’utilisation des commandes ou
réglages ou le non respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l’irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
pg001-024_DC912_37_Eng 2/27/08, 14:465
6
English
Contents
General Information
Environmental Information ................................ 7
Supplied accessories ............................................ 7
Safety Information ................................................ 7
Hearing Safety ....................................................... 8
Preparations
Connections ................................................... 9~10
Connecting the wireless subwoofer
Power
Antenna connection
Optional connection
Connecting a USB mass storage device or
SD/MMC memory card
Connecting other equipment to your system
Mounting the set onto wall .............................. 11
Using Remote Control ..................................... 11
Controls
Controls on the system .................................... 12
Controls on the remote control .................... 13
Basic Functions
Switching the system on ................................... 14
Switching the system to standby mode ........ 14
Switching the system to Eco Power Standby
mode ..................................................................... 14
Power Saving Automatic Standby .................... 14
Adjusting volume and sound ............................ 14
Radio Reception
Tuning to radio stations .................................... 15
Programming radio stations ............................. 15
Automatic programming
Manual programming
Tuning to preset radio stations ....................... 15
USB/Card
Using a USB mass storage device/SD/MMC
memory card ................................................ 16~17
Using playback features .............................. 17~18
Basic playback controls
Different play modes: SHUFFLE and REPEAT
Programming audio files
Dock for iPod
Playing Apple iPod using DC910 ..................... 19
Compatible iPod player
Dock adaptor
Playing Apple iPod
Charging iPod battery using the dock ........... 19
AUX
Listening to an external source ...................... 20
Clock/Timer
Clock setting ....................................................... 21
Timer setting ....................................................... 21
Sleep timer setting ............................................. 22
Specifications ........................................... 23
Maintenance.............................................. 23
Tr oubleshooting ............................. 24~25
pg001-024_DC912_37_Eng 2/27/08, 14:466
English
7
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the support that Philips
offers, register your product at www.philips.com/
welcome.
This set complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
–This device may not cause harmful
interference, and
– This device must accept any interference
received, including interference that may
cause undesired operation.
Environmental Information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Supplied accessories
– remote control with 1 CR2025 battery
–4 X iPod dock adaptors
–(Input: 100- 240V ~ 50/60Hz 1.6 A,
Output: 29.0V 2.5A; manufacturer: Philips;
model No.: PAT075A29UL)
–1 x AUX cable
–Mounting kit (2 dowels and 2 screws)
Safety Information
●Before operating the system, check that the
operating voltage indicated on the typeplate of
your system is identical with the voltage of your
local power supply. If not, please consult your
dealer.
●Where the MAINS plug or an appliance coupler
is used as the disconnet device, the disconnect
device shall remain readily operable.
General Information
●Place the system on a flat, hard and stable
surface.
●Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
●The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
●Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
●No naked flame sources, such as lighted candles,
should be placed on the apparatus.
●No objects filled with liquids, such as vases, shall
be placed on the apparatus.
●Install this unit near the AC outlet and where the
AC power plug can be reached easily.
●The apparatus shall not be exposed to dripping
or splashing.
●Excessive sound pressure from earphones and
headphones can cause hearing loss.
●Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
●If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
●The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
●Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
●When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
pg001-024_DC912_37_Eng 2/27/08, 14:467
8
English
General Information
Hearing Safety
Listen at a moderate volume.
●Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
●Sound can be deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
●Set your volume control at a low setting.
●Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
●Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.
●Be sure to use your equipment reasonably and
take appropriate breaks.
Be sure to observe the following
guidelines when using your headphones.
●Listen at reasonable volumes for reasonable
periods of time.
●Be careful not to adjust the volume as your
hearing adapts.
●Do not turn up the volume so high that you
can't hear what's around you.
●You should use caution or temporarily
discontinue use in potentially hazardous
situations.
●Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a traffic hazard and is illegal in many
areas.
pg001-024_DC912_37_Eng 2/27/08, 14:468
English
9
BConnecting the wireless subwoofer
1Place the subwoofer on the floor near an AC
outlet.
2Connect the power cord of the subwoofer to
the AC outlet.
3Power on both the main set and subwoofer.
➜Wireless connection will set up automatically.
In case the wireless connection fails due
to conflict or strong interference etc.,
you may need the following procedures
for manual pairing:
1In standby mode, press and hold 2; on the set
for three seconds.
➜“PAIRING” flashes on the display screen.
Preparations
Connections
The type plate is located at the bottom of
the system.
APower
●Before connecting the AC power adaptor to the
wall outlet, ensure that all other connections
have been made.
●DC jack is located at the bottom panel of the
set.
WARNING!
–Use the supplied AC power adaptor only!
Using any other power connection device
may damage your main set!
–For optimal performance, use only the
original AC power adaptor.
–Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
POWERFUL BASSPOWERFUL BASS
pg001-024_DC912_37_Eng 2/27/08, 14:469
10
English
Preparations
2Press and hold the PAIR button on the rear of
the subwoofer for three seconds.
➜The LED indicator on the subwoofer flashes.
●If the connection succeeds, the display shows
“PAIR OK”.
●If the connection fails or the connection cannot
be set up successfully within 60 seconds, the
display shows “PAIR FAIL”.
Notes:
– The wireless connection will be disconnected
automatically after power-off.
– See “Basic Functions - Switching the system to
Eco Power Standby mode” for how to switch
between Eco Power Standby mode and standby
mode.
CAntenna Connection
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●Adjust the FM antenna for optimal FM stereo
reception.
DOptional connection
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
Connecting a USB mass storage device
or SD/MMC memory card
By connecting a USB mass storage device or SD/
MMC memory card to the Hi-Fi system, you can
enjoy the device's or card’s stored music through
the powerful speakers of the Hi-Fi system.
●Insert the USB device's USB plug into the
socket on the set.
OR
for the devices with USB cables:
1Insert one plug of the USB cable (not supplied)
to the socket on the set.
2Insert the other plug of the USB cable to the
USB output terminal of the USB device.
OR
for the memory card:
●Fully insert the memory card (metal contact
facing left) into the SD / MMC slot on the top
of the system.
Connecting other equipment to your
system
This feature allows you to listen to music from
the external equipment throught the powrful
speakers of the Hi-Fi system.
●Use an Aux-in cable (supplied) to connect the
AUX IN-1 or AUX-2 jack (3.5mm, located on
the bottom panel) to an AUDIO OUT or
headphone jack on an external device (such as
TV, Laser Disc player, DVD player or CD
recorder).
Note:
– Refer to the operating instructions for the
connected equipment for details.
pg001-024_DC912_37_Eng 2/27/08, 14:4610
English
11
Mounting the set onto wall
See the separate sheet of Wall mounting
instructions on how to mount the set onto wall.
Note:
–To secure the mounting on wall, cement wall is
required.
Using Remote Control
IMPORTANT!
–Before using the remote control,
remove the insulation plastic tab as
shown in the picture below.
–If the remote control does not
function correctly or the operating range
is reduced, replace the battery with a
new (CR2025) battery.
1Push to open the battery tray.
2Replace a new battery according to the
indicated polarity.
3Push the battery tray back to close it.
Using the Remote Control to operate
the Player
1Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
2Select the source you wish to control by
pressing one of the source select buttons on the
remote.
3Then select the desired function (for example,
ÉÅ, ¡ or ™).
CAUTION!
–Remove battery if it is exhausted or will
not be used for a long time.
–Battery contains chemical substances, so
they should be disposed of properly.
–Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
Preparations
pg001-024_DC912_37_Eng 2/27/08, 14:4611
12
English
Controls
Controls on the system
1SD / MMC
–is the slot used to insert an SD/MMC memory
card.
2USB port
– jack for the external USB mass storage device.
3iPod dock
–is used to dock your iPod player for playback or
recharging through this system.
4POWER
–switches the system on or to Eco Power
standby/normal standby with clock display.
5SOURCE
–selects the respective sound source for TUNER
(FM)/iPod/USB/CARD (SD/MMC)/AUX.
6PRESET +/-
–(for USB/CARD) skips to the beginning of a
current/previous/subsequent album.
– selects a preset radio station.
DBB (Dynamic Bass Boost)
–enables or disables bass enhancement. (in USB/
Tuner mode, hold down then release to select)
DSC (Digital Sound Control)
– selects different types of preset sound equalizer
settings. (in USB/Tuner mode, hold down then
release to select)
7VOLUME +/-
–adjusts the volume level.
–adjusts the hours and minutes for the clock/timer
function.
–switches between 12 hour and 24 hour dispaly.
8S/T
for USB/CARD/iPod
................................. fast searches back and forward
within a track (press and hold).
................................. skips to the beginning of a
current/previous/subsequent
track.
for TUNER ........ tunes to radio stations (down/
up).
9 ÉÅ
–starts or interrupts playback.
3
4
5
6
7
89
2 1
pg001-024_DC912_37_Eng 2/27/08, 14:4612
English
13
Controls
1
$
#
@
!
0
9
8
2
3
4
5
6
7
Controls on the remote control
1POWER
–switches the system on or to Eco Power
standby/normal standby with clock display.
2MENU
–is equivalent to the MENU button on your iPod
player.
3USB/SD
– swicthes between USB and SD mode.
4SHUFFLE/REPEAT
for USB/CARD
................................. selects a repeat playback mode.
................................. plays USB/CARD tracks
randomly.
5ALBUM/PRESET 3 / 4
–(for USB/CARD) skips to the beginning of a
current/previous/subsequent album.
– selects a preset radio station.
6SLEEP
–selects the sleeper time.
7TIMER
–sets the timer function.
8MUTE
– interrupts and resumes sound production.
9SET TIME /VOL +/-
–adjusts the volume level.
–adjusts the hours and minutes for the clock/timer
function.
0PROG/SET TIME
–(for USB/CARD) programs tracks.
–(for TUNER) programs radio stations.
–sets the clock function.
!AUX
–selects AUX mode.
@ÉÅ
–starts or interrupts playback.
– confirms a selection (for iPod menu operation
only).
TUNING +/-
for TUNER ........ tunes to radio stations (down/
up).
–Navigates the iPod menu.
S/T
for USB/CARD/iPod
................................. fast searches back and forward
within a track (press and hold).
................................. skips to the beginning of a
current/previous/subsequent
track.
#TUNER
–selects the tuner source
$iPod
– selects the iPod source.
Notes for remote control:
–First select the source you wish to
control by pressing one of the source select
keys on the remote control (for example
iPod, TUNER).
–Then select the desired function (for
example
ÉÅ
,S , T ).
pg001-024_DC912_37_Eng 2/27/08, 14:4613
14
English
Basic Functions
Switching the system on
●Press POWER.
➜The system will switch to the last selected
source.
●Press SOURCE on the set or iPod, TUNER,
USB/CARD or AUX on the remote control.
➜The system will switch to the selected source.
Switching the system to standby
mode
●Press POWER.
➜
The backlight for clock display is dim in standby.
➜The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.
Switching the system to Eco
Power Standby mode
●Press and hold POWER for more than 2
seconds.
➜The backlight will go blank.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after playback has reached the end and
no control is operated.
Adjusting volume and sound
1Press VOLUME +/- on the system (or VOL +/-
on the remote control) to decrease or increase
the volume.
➜Display shows the volume level VOL and a
number from 0, 1, 2, ...32.
2 In USB/Tuner mode, press and hold DSC on the
set, then release to select a sound effect: ROCK/
POP/JAZZ/CLASSIC.
●In iPod /AUX mode, simply press DSC on the
set to select the desired sound effect.
3 In USB/Tuner mode, press and hold DBB on the
set, then release to switch bass enhancement on
or off.
●In iPod /AUX mode, simply press DBB on the
set to switch bass enhancement on or off.
➜If the DBB is activated, DBB ON is shown.
➜If the DBB is deactivated, DBB OFF is shown.
4Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜Playback will continue without sound and
MUTE will flash on the display.
●To activate sound reproduction you can:
– press MUTE on the remote control again;
–adjust the volume controls;
–change source.
pg001-024_DC912_37_Eng 2/27/08, 14:4614
English
15
Radio Reception
Tuning to radio stations
1Press SOURCE repeatedly (or TUNER on the
remote control) to select the tuner source (FM).
2Hold S/T on the system (or TUNING +/-
on the remote control) and then release the
button.
➜The system will start searching for a radio
station with sufficient signal strength.
3Repeat step 2 if necessary until you find the
desired station.
●To tune to a weak station, press S/T on
the system (or TUNING +/- on the remote
control) briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
(40 FM) in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1Press PRESET +/- on the system (or ALBUM/
PRESET 3 / 4 on the remote control) to
select the preset number where programming
should start.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROG on the remote control for more
than two seconds to activate programming.
➜All available stations are programmed.
Manual programming
1Tune to your desired station (refer to “Tuning to
radio stations”).
2Press PROG on the remote control to activate
programming.
➜PROG appears in the display.
3Press PRESET +/- on the system (or ALBUM/
PRESET 3 / 4 on the remote control) to
allocate a number from 1 to 40 to this station.
4Press PROG on the remote control again to
confirm the setting.
➜PROG disappears, the preset number and
the frequency of the preset station are shown.
5Repeat the above four steps to store other
stations.
●You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●Press PRESET +/- on the system (or ALBUM/
PRESET 3 / 4 on the remote control) until
the desired preset station is displayed.
pg001-024_DC912_37_Eng 2/27/08, 14:4615
16
English
USB/Card
Using a USB mass storage
device/SD/MMC memory card
By connecting a USB mass storage device or SD/
MMC memory card to the Hi-Fi system, you can
enjoy the device's or card’s stored music through
the powerful speakers of Hi-Fi system.
Playing a USB mass storage device/SD/
MMC memory card
Compatible mass storage devices/cards
With the Hi-Fi system, you can use:
–USB flash memory (USB 2.0 or USB1.1)
– USB flash players (USB 2.0 or USB1.1)
–SD/MMC memory cards
Notes:
–In some USB flash players (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents will
be unplayable on any other devices (such as this
Hi-Fi system).
–Compatibility of the USB connection on this
product:
a) This product supports most USB Mass storage
devices (MSD) that are compliant to the USB
MSD standards.
i) Most common Mass storage class devices are
flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" show up on your
computer after you plugged the mass storage
device into your computer, most likely it is MSD
compliant and it will work with this product.
b) If your Mass storage device required a battery/
power source. Please make sure you have a fresh
battery in it or charge the USB device first and
then plug it into the product again.
–Supported Music type:
a) This device only supports unprotected music
with the following file extension:
.mp3
.wma
b) Music bought from on-line music stores are not
supported because they are secured by Digital
Rights Management protection (DRM).
c) File name extensions that end with the
following are not supported:
.wav; .m4a; .m4p; mp4; .aac and etc.
–No Direct connection can be made from
Computer USB port to the product even you have
either or both mp3 or wma files in your computer.
Supported formats:
–USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
–MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
–WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
–Number of albums/ folders: maximum 99
– Number of tracks/titles: maximum 400
–ID3 tag v2.0 or later
–File name in Unicode UTF8 (maximum length:
128 bytes)
The system will not play or support the
following:
– Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
–Non-supported file formats are skipped. This
means that e.g.: Word documents .doc or
MP3 files with extension .dlf are ignored and
will not be played.
–AAC , WAV, PCM audio files
–DRM protected WMA files
–WMA files in Lossless format
pg001-024_DC912_37_Eng 2/27/08, 14:4616
English
17
USB/Card
How to transfer music files from PC to a
USB mass storage device/SD/MMC
memory card
By dragging and dropping music files, you can
easily transfer your favorite music from PC to a
USB mass storage device/SD/MMC memory
card.
For a flash player, you can also use its music
management software for the music transfer.
However, those WMA files may be
unplayable for compatibility reasons.
How to organize your MP3/WMA files on
the USB mass storage device/SD/MMC
memory card
This Hi-Fi system will browse the MP3/WMA
files in the folders/sub-folders/titles order.
Example:
Root
Title 001
Title 002
Title 003
Album 01
Title 001
Title 002
Title 003
Album 02
Title 001
Title 002
Title 003
Album 03
Title 001
Title 002
Title 003
Organize your MP3/WMA files in different
folders or subfolders as required.
Notes:
–If you have not organized MP3/WMA files into
any albums on your disc, an album "01" will be
automatically assigned for all those files.
– Make sure that the file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
–For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
1Check the USB device/SD/MMC memory card
has been properly connected. (See
”Preparations: Connecting a USB mass storage
device or SD/MMC memory card”).
2Press SOURCE on the system (USB/CARD
on the remote) once or more to select USB/
CARD.
➜NO AUDIO appears if no audio file is found
in the USB device/SD/MMC memory card.
3Play the available audio files using playback
buttons on the set or remote control (such as
2;, S/T).
Using playback features
Basic playback controls
To play a disc
●Press ÉÅ to start playback.
To interrupt playback
●Press 2; during playback.
➜To resume, press 2; again.
To select a different track
●Press S/T once or repeatedly until the
desired track number appears in the display.
●For MP3/WMA, you may press PRESET +/- on
the system (or ALBUM/PRESET 3 / 4 on
the remote control) to select a desired album,
then select your desired track.
To find a passage within a track
1Press and hold down on S/T .
➜The file is played at high speed and low
volume.
pg001-024_DC912_37_Eng 2/27/08, 14:4617
18
English
USB/Card
Different play modes: SHUFFLE and
REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUF ................ all the audio files are played in
random order
REP ALL ........... repeats all the audio files/
programme
REP ................... plays the current audio file
continuously
1To select your play mode, press SHUFFLE/
REPEAT on the remote control before or
during playback until the display shows the
desired function.
2Press 2; to start playback if in the STOP
position.
➜If you have selected SHUFFLE, playback starts
automatically.
3To return to normal playback, press SHUFFLE
/ REPEAT on the remote control until the
various SHUFFLE/ REPEAT modes are no longer
displayed.
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
Programming audio files
Programme in the STOP position to select and
store your audio files in the desired sequence. If
you like, store any track more than once. Up to
40 audio files can be stored in the memory.
1In the stop position, use the S/T to select
your desired track number.
●For MP3/WMA, you may press PRESET +/- on
the system (or ALBUM/PRESET 3 / 4 on
the remote control) to select a desired album,
then select your desired track.
2Press PROG on the remote control to store.
➜Display: PROG flashes, and PR 01 is displayed
briefly, then the selected track number (and the
selected album number for MP3).
3Repeat steps 1-2 to select and store all desired
tracks.
➜PROGRAM FULL is displayed if you attempt
to programme more than 40 tracks.
4To start playback of your programme, press 2;.
5To stop playback, press and hold PROG.
To review the programme
● Stop playback and press and hold PROG.
➜the programmed files are displayed one by
one.
To delete the programme
● Press PROG twice in the STOP mode;
● Press PROG three times during playback.
Note:
–For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
pg001-024_DC912_37_Eng 2/27/08, 14:4618
English
19
Playing Apple iPod
1Correctly place the iPod in the dock.
2Press repeatedly SOURCE on the main unit
(or iPod on the remote control) .
3Power on your iPod.
4Select and playback your favourite song/video/
photo on the iPod.
Notes:
– Using the following buttons only ( 2;, S / T ,
VOLUME and MUTE ) on the DC910 and its
remote control, you can control some iPod playback
features, such as, Play/Pause, selecting next/
previous track, fast forwarding/rewinding and
changing volume.
– You may also use TUNING +/- and ÉÅon
the remote control to navigate the iPod menu and
confirm a selection.
Charging iPod battery using the
dock
In normal standby or power-on mode, you can
charge the iPod while docking.
Note:
– iPod charging is not available in ECO power
standby mode.
DOCK for iPod
Playing Apple iPod using DC910
The set is equipped with a dock for iPod. By
connecting Apple iPod to the set, you can listen
to the sound of the docked iPod through the
powerful speakers of the Hi-Fi system and view
the iPod video (if available).
Compatible iPod player
●Apple iPod models with 30-pin dock connector
as follows:
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,
30GB Video, 60GB/80 Video, Mini, Nano 1st /
2nd/3rd generation, iPod 5th generation (video),
iPod touch and iPod classic.
●iPod Shuffle is not supported.
Dock adaptor
Before plugging your player in the dock, snap the
suitable dock adaptor (supplied) into the dock to
provide a snug fit for the player to be docked.
Selecting the correct dock adaptor
●4 iPod dock adaptors are included. Each adaptor
has indication to match different iPod types.
Installing the dock adaptor
1As shown below, align the slots of the dock and
latches of the adaptor, then slide in the adaptor.
Removing the dock adaptor
1As shown, slide the adaptor up to take it out.
pg001-024_DC912_37_Eng 2/27/08, 14:4619
20
English
AUX
Listening to an external source
This feature allows you to listen to music from
the external equipment throught the powrful
speakers of the Hi-Fi system.
1Use an Aux-in cable (supplied) to connect the
AUX 1 or AUX 2 jack (3.5mm, located on the
bottom panel) to an AUDIO OUT or
headphone jack on an external device (such as
TV, Laser Disc player, DVD player or CD
recorder).
2Press SOURCE on the system repeatedly (or
AUX on the remote control) to select “AUX 1”
or “AUX 2”.
Note:
– Refer to the operating instructions for the
connected equipment for details.
pg001-024_DC912_37_Eng 2/27/08, 14:4620
English
21
Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode (12HR or 24HR for example).
1In standby mode, press and hold PROG/SET
TIME on the remote control.
2Press VOLUME+/- to switch between 12 hour
and 24 hour display.
3Press VOLUME+/- again to confirm.
➜The clock digits flash on the display panel.
➜If the clock has not been set, "--: --" flashes
4Press VOL UME +/- on the system (or
VOL +/- on the remote control) to set the
hours.
5Press PROG/SET TIME on the remote
control again.
➜The clock digits for the minutes flash.
6Press VOL UME +/- on the system (or
VOL +/- on the remote control) to set the
minutes.
7Press PROG/SET TIME on the remote
control to confirm the time.
Timer setting
●The system can be used as an alarm clock,
whereby the TUNER (FM)/iPod/USB/CARD
(SD/MMC) is switched on at a set time (one
time operation). The clock time needs to be set
first before the timer can be used.
●During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1In standby mode, press TIMER for more than
two seconds.
2Press SOURCE on the system repeatedly (or
the respective source keys on the remote
control) to select the sound source.
➜“SELECT SOURCE” is displayed.
3Press TIMER to confirm your desired mode.
➜The clock digits for the hours flash.
4Press VOL UME +/- on the system (or
VOL +/- on the remote control) to set the
hours.
5Press TIMER again.
➜The clock digits for the minutes flash.
6Press VOL UME +/- on the system (or
VOL +/- on the remote control) to set the
minutes.
7Press TIMER to confirm the time.
➜The timer is now set and activated.
Activating and deactivating timer
●In standby or during playback, press TIMER
once on the remote control.
➜Display shows if activated, and disappears if
deactivated.
pg001-024_DC912_37_Eng 2/27/08, 14:4621
22
English
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1In power on mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ 0 ™ 60 …
➜"SLEEP XX" is displayed. "XX" is the time in
minutes.
➜"SLEEP" is displayed if the sleep time you
have selected is not 0.
2When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
●Press SLEEP repeatedly until "0" is displayed, or
press POWER.
Clock/Timer
pg001-024_DC912_37_Eng 2/27/08, 14:4622
English
23
Cleaning the Cabinet
●Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Maintenance
Specifications
AMPLIFIER
Output power ....................................... 2 x 15 W RMS
Signal-to-noise ratio ....................................... ≥ 70 dBA
Frequency response ...... 20 Hz – 20 KHz, ± 3 dB
(Subwoofer). ............................................... 50 - 180Hz
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 4 Ω
Impedance headphones ........................................ 32 Ω
Output power headphones ....................... <50 mW
TUNER
FM wave range ................................... 87.5 – 108 MHz
Antenna
FM ....................................................................... 75 Ω wire
USB PLAYER/SD/MMC CARD
USB ................................................................... 12Mb/s, V1.1
......................................... support MP3 and WMA files
Number of albums/folders ................. maximum 99
Number of tracks/titles ...................... maximum 400
GENERAL INFORMATION
AC Power ................................. 100 – 240 V, 50/60 Hz
Dimensions (w x h x d) . 210 x 200 x 567 (mm)
Weight .............................................................................. 3 kg
Standby power consumption ............................ <7 W
Eco power standby ................................................. <1 W
Specifications and external appearance are
subject to change without notice.
pg001-024_DC912_37_Eng 2/27/08, 14:4623
24
English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Radio reception is poor.
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
Some files on the USB device are not
displayed.
“DEVICE NOT SUPPORTED” scrolls on the
display.
✔If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
✔Increase the distance between the Micro HiFi
System and your TV or VCR.
✔Remove and reconnect the AC power plug and
switch on the system again.
✔Adjust the volume.
✔Select the source (iPod or TUNER, for example)
before pressing the function button (ÉÅ, 5 /
6).
✔Reduce the distance between the remote
control and the system.
✔Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔Replace the battery.
✔Point the remote control directly toward
IR sensor on the front of the system.
✔Set the clock correctly.
✔Switch on the timer.
✔Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔Check if the number of folders exceeds 99 or
the number of titles exceeds 400.
✔Remove the USB mass storage device or select
another source.
Problem Solution
pg001-024_DC912_37_Eng 2/27/08, 14:4624
English
25
Wireless connection with the subwoofer
fails
✔Ensure that the subwoofer is powered on.
✔The distance between the main set and
subwoofer may exceed the maximum range of
wireless communication. Move the subwoofer
closer to the main set.
✔Obstacles may exist between the main set and
subwoofer. Remove the obstacles.
✔Strong interference may exist. Ensure there is no
strong interference that may impair the
communication between the main set and
subwoofer.
✔If the problem remains, see “Preparations -
Connecting the wireless subwoofer” for manual
pairing.
Problem Solution
Tr oubleshooting
pg001-024_DC912_37_Eng 2/27/08, 14:4625
26
Philips, P.O. Box 671539, Marietta, GA. 30006-0026
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per-
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•Shipping charges to return defective product to Philips.
•Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
•Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
•Damage or claims for products not being available for use, or
for lost data or lost software.
•Damage from mishandled shipments or transit accidents when
returning product to Philips.
•A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
•A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•Product lost in shipment and no signature verification receipt
can be provided.
•Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
3121 233 48802
pg001-024_DC912_37_Eng 2/27/08, 14:4626