Philips Electronics Singapore RC140 RF Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	359444
Application ID	05YHwR36jgkh3Vobzc2jqQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.11kB (1538891 bits)
Date Submitted	2003-09-23 00:00:00
Date Available	2003-09-23 00:00:00
Creation Date	2003-08-27 18:32:01
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual
Document Creator	Canon

RC1406901 (Falcon & Skyhawk) Universal RF Remote
RC14OGED1 (Falcon Er Skyhflwk) Universal RF Remote
Compliance Information
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not uuse harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer‘s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics
card is required to ensure compliance with FCC regulations.
Changes or modifications to this unit not expressiy approved by the
party responsible for compliance could void the user‘s authority to
operate this equipment.
RC14D§901 (Fa/can & Skyhawk) Universal RF Remote
Industry Canada Compliance Statement
ICES-003 This Class B digital apparatus complies with Canadian ICES—003
RSS 210, Low Power Licence-Exempt Radioacmmunications Devices (All
Frequency Bands)
Get appareil numérique de la Classe B est ounforms a la norme NMB-003
du Canada.
RSS 210, Dispositifs de radiocommunications de faible puissanoe, exempts
de licence (pcurtuutes Ies bandes de fnéquences)
RC14D§9|71 (Falcon & Skyflawk) Universal RF Remote
Table of contents
2.
2.1
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
4.
4.1
4.2
4.3
4.4
5.
Introduction
Purpose of this document
Edition history
Definitions, acronyms and abbreviations
Reference documents
General product description
Product perspective
Functlonal requirements
Function Overview
Indicator LED operation
Key Function
IR Learn Mode
Backlight
LCD Display
Normal Operation
Custom operation and display (Customizing mode)
RF Home ID and Device ID Setup
Memory Retention
Power down mode
Stuck Key mode
Key Numbering
Function Table Overview
Description of error handling
External Interface Requirements
Hardware interfaces
Input devices
Output Devices
Storage Devices
Universal ID Load List
mooxrxrxr
Errorl Bookmark not defined.
39
39
40
41
59
60
60
60
60
61
62
RC1406901 (Faiwn & Skyhawk) Universal RF Rsmare
1. Introduction
1.1 Purpose of this document
The purpose of this document is to identify lhe requirement of RF Remote Control RC1406901.
This document describes Ihe software requirements of this remote.
1.2 Edition history
Version Status Date Author Modificationis)
Approved 1 12/5/2003 lnlllal version as in URS
RCHUBDLH (Falmn & Skyhawk) Universal RF Remote
1.3 Definitions, acronyms and abbreviations
uP Microprocessor
OTP One Time Programmable
ROM Read Only Memory
EEPROM Electrical Erasable Programmable ROM
IR Infra Red
RF Radio Frequency
LED Light Emitting Diode
RCS Remote Control Systems
STB Set-top box
TV Television
OEM Original Equipment Manufacturer
1.4 Reference documents
[RCMM RF/IR EXT] T|tle IR-Protocol for Vlfireless Multimedia Remote
Control
Document lD SDOODO-JWOZO
Author Johan Woulers
Publisher Philips RCS
Version 2.2
Date 10/07/2000
[URS] Title Key_3b
Document [D Key_3b,x|s
Author Koji Harada
Publisher Onkyo
Version
Date 26-04-2003
[Sheet_190] Title Electrical Specification
Document ID
Author HS Tan
Publisher RCS
Version
Date
[PB]
Tltle
Document ID
Author
Publisher
Version
Date
Rcmmm (Falcon & Skyhawk) Unweml RF Remote
Project Brief
Erik
ROS
RC1406901 {Falmn 6 Skyhawk) Universal RF Remote
2. General product description
2.1 Product perspective
The RC1406901 is an Universal RF remote control for AV Receiver. The remote control will
sends command code via a 433MHz RF link usable in US, Canada, Australia and EU market.
For proper operation, RC1406901 will need to pair with a RF extender which will translate RF
command to IR signal and send the [R signal to an IR receiving ofAV Receiver equipment.
RC1406901 contains a dedicated code for AMP. CD, Net—Tune and MD mode, universal code
for DVD, SAT, TV, VCR and CABLE mode. The RF database cover US. Canada, Australia,
Asia, Japan and EU market.
1 MODE button, 3 SELECTOR buttons and 1 MACRO button are all hack—lighted by green LED.
The jog switch is use for msnu selection and confirmation of user preference that is display in
the LCD panel.
Waiting for updated version:
R01406901 {Fa/con & Skthwk) UniversB/RF Remote
Model:
Falcon
Skyhawk
(These picture are for indication only, actual ID please refer to graphic passport)
RC14069|71 (Fa/can & Skyhawk) Universal RF Remote
3. Functional requirements
When the remote is inserted batteries for the the very first time or afler a RESET key
combination is activated, the RC1406901 will start-up in AMP mode.
Default universal ID for TV, VCR and DVD is:
Mode Default Device Universal lD code
AMP Dedicated ——
CD Dedicated —
DVD 1 (Preset code) NEC DVD 1234
NET-TUNE Dedicated —
TV No code 0000
VCR No code 0000
CDR Dedicated --
CABLE No code 0000
MD Dedimted --
SATELLITE No code 0000
Note : To get to DVD2 user need to set universal ID code of DVD tu 1235
3.1 Function Overview
The features of RCXXXX can be summarised as follows:
5 back-lighted battens {1 made, 3 Selector & 1 Macro)
2 Indicating LED (Red > tmnsmil IR, Green > transmit RF)
Learnable
Data Backup to and from computer
Normal operation
Mode and Selector Setting
Mode change
Selector change
Customise Operation
Prepmgram
Learning
Leam Macro
Made Edit
Setup
IR/RF selection
LCD Display
Macro Keys
Rcvmaem (Falcon & Skynawk) Universal RF Remote
Stuck key Timeout
Simultaneous Keypress
Factory Test mode
Universal for lR USA & Canada, EU, Australia, New Zealand, Asia and Japan for
devices of DVD,SAT, TV, VCR, and CABLE Library
Universal for RF USA & Canada, EU, Australia and New Zealand for devices of
DVD,SAT,TV, VCR, and CABLE Library
3.2 Indicator LED operation
Visible LEDs are used for user feedback for confirmation of key presses located at the top of the
remote.
3.2.1 RF or IR Sending indication
When a key (other then mode keys) is press, and if this key triggers a command to be
transmitted — the indicating LEDs located at the top of the remote will blinks for the duration of
transmission. The blinking frequency of LED depending on the code sends by R01406901.
When transmitting RF signal Green LED will blink. When transmitting IR signal Red LED will
blinks.
LED blinks
Mm.LED__|—|_r‘|_.|—|_J—|_
Validkey —l_ 1
If a key is press and there is no command to be transmitted. the mode LED will remains 0“.
LED ofl
3.2.2 Mode, Selector (Input. ZoneZ) and Macro key
Each of the keys have a green LED under it. When any of the key is press and released the
LED under the pressed key is turn ON. While the LED under the key is ON , if the key is press
again the LED under that key will turn off. The LED under the key will also turn off when time-
out occur. Under nonnai operation while both MODE LED and INPUT LED is off. if Jog dial is
scroll both the MODE and INPUT LED will turn on. Input is pressed while both Mode and Input
LED are ON, Input LED is still on and Mode LED turns OFF.
RC1406901 (Falcon & Skyhswk) Universal RF Remote
3.2.3 Time-Out
Light, Mode and Selector key (“Input", “Zon82") have 7 second time out. When 7 second
duration has elapsed afler lhe Mode or Selector key is release, the remote will exit the current
state. For the Light key, once it is press the backlight will turn on. after the light key is release if
there is no key press or scroll for 7 second the backlight will turn off.
Time out for features in Customize mode is SOseconds.
3.2.4 Unassigned Keys
The remote control shall ignore any unassigned key presses for a particular mode and not
transmit IR unless otherwise noted.
RC1406901 (Falcon & Ski/hawk) Universe! RF Remote
3.3 Key Function
3.3.1 MODE Key
When MODE key is pressed while MODE LED is off. MODE LED will turns on for 7 seconds.
When MODE key is pressed while MODE LED is on, MODE LED will turn off.
When MODE key is pressed continuously the MODE LED will turn on continuously until a 7
second time out occur upon MODE key release.
VWien MODE key is pressed while the LED under any one of the Key number 24282932 is on,
the LED under the key number 24, 28, 29, 32 that is on will turn off, and MODE LED will turn on
for 7 seconds.
When other than key number 24, 2B, 29, 32 key is pressed while MODE LED is on, MODE LED
continues to on for 7 seconds, and the pressed key is operated.
When Jog dial is scroll while the MODE LED is on, “MODE” can be changed, and the MODE
LED will turn on for the entire process until jog is not being scroll for 7 second.
3.3.2 LIGHT Key
When Light key is press while Backlight is on, Backlight will turn off.
When Light key is press while Backlight is off, Backlight will turn on.
When all other than the Light key is pressed orjog is scroll while Backiight is on, Backlight will
continue to turn on until 7 seconds time out occur.
3.3.3 lNPUT Key
When INPUT key is pressed while INPUT LED is off, INPUT LED will turns on for 7 seconds.
When INPUT key is pressed while INPUT LED is on, INPUT LED will turn off.
When INPUT key is pressed continuously the INPUT LED will turn on continuously until a 7
second time out occur upon INPUT key release.
When INPUT key is pressed while the LED under any one of the Key number 2428.29.32 is on,
the LED under the key number 24, 28, 29, 32 that is on will turn off, and INPUT LED will turn on
for 7 seconds.
When otherthan key number 24. 28, 29. 32 key is pressed while INPUT LED is on, INPUT LED
continues to on for 7 seconds, and the pressed key is opereted.
When Jog dial is scroll while the INPUT LED is on. “INPUT’ selector can be changed, and the
INPUT LED will turn on for the entire process until jog is not being scroll for 7 second.
3.34 ZONE 2 Key
When ZONE 2 key is pressed while ZONE 2 LED is off, ZONE 2 LED will turns on for 7 seconds.
RC1406901 {Falcon & Skyhawk) Universal RF Remote
When ZONE 2 key is pressed while ZONE 2 LED is on, ZONE 2 LED will turn oft.
When ZONE 2 key is pressed continuously the ZONE 2 LED will turn on continuously until a 7
second time out occur upon ZONE 2 key release.
When ZONE 2 key is pressed while the LED under any one of the Key number 24,28,29,32 is
on, the LED under the key number 24, 28, 29, 32 that is on will turn off, and ZONE 2 LED will
turn on for 7 seconds.
When other than key number 24, 28. 29. 32 key is pressed while ZONE 2 LED is on, ZONE 2
LED oontinues to on for 7 seconds, and the pressed key is operated.
When Jog dial is scroll while the lNPUT LED is on. “INPUT" selector can be changed, and the
lNPUT LED will turn on for the entire process until log is not being scroll for 7 second.
When the othervalid keys are pressed while ZONE 2 LED is on, the oommand of ZONE 2 is
added ahead of the command of the key that is being pressed, and then they are transmitted.
When the following code is 1a, it is set to 1c, and when the following code is 1b, it is set to 1d.
( Refer to 'Code table' of the device. )
No code is transmitted when ZONE 2 key is press or if no key is press after pressing the ZONE 2
key.
3.3.5 Punch through TV key (key number 3, 4, 5, 6, 7, 8)
These six buttons can transmit the unique command regardless of the current Mode. These
buttons are dealt with as a clone of the button ofthe TV (not TV2, TV3, ,TVn) Mode.
The relation of a clone is as follows.
Key number 3 will punch through to key number 1 in TV mode.
Key number 4 will punch through to key number 37 in TV mode.
Key number 5 wilt punch through to key number 33 in TV mode,
Key number 6 will punch through to key number 34 in TV mode.
Key number 7 will punch through to key number 35 in TV mode.
Key number 8 will punch through to key number 36 in TV mode.
if TV mode is deleted by the Mode edit menu, no command is transmitted when these keys are
press and no command is to be learn into these keys.
The Mode of the remote will not change when these keys are pressed.
3.3.6 Macro Key
When Macro Key is pressed while Macro LED is off, MAcro LED will turns on.
White Macro LED is on the stored Macro is selected by scrolling Jog dial. and the selected
Macro is transmitted by pressing the Jog dial.
A maximum of eight Macro can be stored into the remote controller.
A maximum of eight commands can be stored into each Macro.
Afler a series of commands are sent. "Macro" LED turns off immediately.
When any key is pressed while a series of commands are sent, they are interrupted and the
pressed key is operated.
RC1406901 (Falcon 6 Skyfiawk) UnIl/srsal RF Remote
Please refer to section 3.7.4 Macro Transmission for activating Macro transmission and refer to
section 3.8.3 Macro Menu for detail programming sequence.
3.3.7 Jog Switch
The Jog switch is for user to do selection on the item display in the LCD by scrolling upward or
downward. Single code transmission is apply when Jog dial is scroll upward or downward,
continuous transmission only apply when jog dial switch is being press continuously.
If Jog is scroll one step at a time, that is each step is longer than 110ms or 220ms (depending
on the type of protocol the remote is sending) then Input code will be transmitted as the jog is
being scroll.
It more than one step change is detected within 110ms or 220ms(depending on the type of
protocol the remote is sending) than no oode is transmitted until the Jog stop scrolling.
3.4 lR Learn Mode
3.4.1 Entering the Learn mode
Press and hold the CUSTOM button for 3 seoonds or longer will go into the customize mode
then use Jog dial to go into Learn menu (referto section 3.8 for pictorial desoription)When in the
Leam menu, first use the Jog dial to select the desired device mode then select the key that
need to learn. Please refer to section 3.8.2 Learning Menu for detail learning sequence. ALL
have Learn mode. However if batteries voltage is below normal level as defined in [Sheet_190],
entering Learn mode is not possible.
3.4.2 Exiting the Learn Mode
At any moment in the Learn mode, to exit the learn mode either by pressing the Custom button
or when 30seoond time out occur, user will exit the Learn mode.
3.5 Backlight
The Backlight is activated by a key at the side of the remote. If this key is pressed while
backlight is OFF. then backlight will turn ON for 7 second upon key release. If this key is press
while Baoklight is ON, then Backlight will turn OFF, If all otherthan the backlight key is pressed
or scrolled while Backlight is ON, Backlight continues to turn on for 7 seconds longer after all key
release orjog dial stop activated.
RCMUBQM (Falcon & Skyhawk) Universal RF Remote
3.6 LCD Display
3.6.1 Normal Display
: lnpul, ZoneZ and ZoneS selectl
Mode display
: AMP
: CD
: DVD
: Net-Tune
: TV
: VCR
: Cable
: Satellite
: MD
: CDR
l—l—r—l—l—l—l—rr—l—
,_
—IU O§m0<—lZUO>
: plural DVD
: pluraITV
3.6.1.2 Selector Display >> INPUT, Zonez
um- : DVD
u_ : Video1
u-_ : VideoZ
u-_ : Vide03
u 4 : Video4
u 5 : Videos
u U N : Tuner
u H O : Phono
u A P : Tape
u D : CD
u S R : MusicSen/er
u R D : Intemel Radio
RC1406901 {Falcon 8. Skyhewk) UniversalRFRemote
3.6.1.3 Macro Display
R O : (Macro)
Macro 1
: MacroZ
: Macro3
: Macro4
: Macro 5
: Macros
: Macro?
: Macro 8
O N E : All Macros areemp’cy
rr'rr—r—r-r‘r—r-C
)> Zmflmmhwmag
01 Fl FJ : named Macro
3.6.2 Custom Display
See section 3.8. Custom operation and display (Customizing mode)
3.6.3 Battery Low
U I
r. B A] T T : Law battery (Display permanently when some key is pressed)
RC1406901 (Falcon & Skyhawk) Universal RF Remote
3.7 Normal Operation
d:Scroll downward
direction of digit: 0, 1,2, 9,0
direction of character : A. B, Y, 2,0, 1,2, a, 9, +, -, =, <, >, _, _. I, "Reverse Slant“, ‘,
"Space", A
u:Scroll upward
direction of digit: 0, 9, S, 1,0
direction of character: A. "spice", “, "Reverse Slant", /, _, __ >, <' =, ., +, 9, s, 2, 1, 0, Z. Y,
p: Press jog dial Go to AMP Mode and transmit the commands of the Input
or Zone 2 selector Mode and Input Selector changing
3.7.1 Mode and Input Selector Changing
While both the “Mode“ LED and the "Input" LED are OFF, ifthe jog dial is scroll upward or
downward then both the Mode and Input sated/Jr will changed simultaneously and the LED
under this 2 keys will turn ON immediately.
While both the "Mode" LED and the "Input" LED are ON, if thejog dial is scroll upward or
downward the Mode and Input selectorwill also changed simultaneously, and the LED under this
2 keys will continue to ON. The LED will turn OFF when 7 second time out occur.
Falcon. Skynawk:
notes:
This is the initial display.
(merino batteries attached)
1a
These are the initial assignmenlfbr 'tnput" and 'Mode'.
Change in Input Selector in order,
and transmit war commands.
Change to the Mods which is
associated vnm input Selector.
“ J ITJ“ “7—H“
RC1406901 (Falcan & Skyhawk) Univarsal RF Remate
R d|l
E E N
4M m AM UM HM DM_
VA ” TA U PA CA_
UL UL UL UL UL UL
> > > + > > > >
D. d up d D. d D. d up d up d UD. d UD. d
RC1406901 (Falczm & Skyhawk) Universal RF Remote
3.7.2 Input and Zonez Selector
While only "Input" or "Zone 2" LED is on by pressing "Input" or "Zone 2" human, only Input or
Zone 2 Selector is changed when jug dial is activated, and the seieclor LED is still on.
Falcon, Skyhawk;
,.
)<<
xm
><
.—c
in»
‘U
cl: :
fin
u d (1
v4 —| pbuV4 .
Lxxxxxl LAMP
u d d u
V5 p’u-5 .
Lxxxxx LAMPL
u d d u
UTAPE p> TAPE
LXXXXX LAMP
1 K
u d d u
uTUNER p>uTUNER
Lxxxxx LAMP
_A
u d d u
RC1406901 (Falcon & Skyhawk) UnNsrsa/ RF Remote
notes:
In case of Zone 2 selecmr is press, the upper display shows Input selector after their LED turns
0“. The Inpul order is as follows.
DVD. V1, V2, V3, V4, V5, TAPE, TUNER, PHONO, CD, MSRV, IRD
Remossor (Falcon & Skyhawk) Universal RF Remnte
3.7.3 Mode Change
While only "Mode" LED is on by pressing "Mode" button, only Mode is changed when jog dial is
act'wated, and Mode LED is still on.
x notes:
Input Selector is not changed.
Change the Mode in older.
The initial Mode order ls as follows.
DVD. TV. VCR. CBL. SAT, CD. MD, CDR1 NET-T
3.7.4 Macro transmitting
While the "Macru" LED is on by pressing "Macro" button, the stored Macm is selected by
scrolling Jog dial.
While the "Mama" LED is on, the selected Macro is transmitted by pressing Jog dial.
p. u
u M A c R 0 notes:
L 1 While a series of commands are transmitted by pressing each “MACRO" human,
the transmission is interrupted ii a certain button is pressed.
1; u d then the pressed button operates.
U M A C R 0 If a series ol commands transmission is completed. MACRO LED turns ofl,
L A 0 F F and it returns in Normal display.
u 6 Empty Macro Islumped and notdisplaysd.
SJ .
p d u d
u M A c R | o
Lil—L
u M A C R 0 llall Macros are empty. showss follows for lwoseeonds,
L N 0 N E then go badtto Normal display.
Reuossm (Falcon & skyhaw Universal RF Remote
3.8 Custom operation and display (Customizing mode)
Pressing "CUSTOM" button for three seconds, the remote goes into Customizing mode.
Pressing "CUSTOM" button or no operation for 30 seconds while Customizing mode, the remote
goes back to Normal display mode.
c:Press "Custom" buiion
c3:Press “Custom" button for three seconds
: Normal disp ay
0 : go to section 3.8.1 Preprogram menu
: go to section 3.8.2 Learning menu
r-r:
r-c
24>
r:
mm >a Am UN
7: U U
C _
"U
: go to section 3.8.3 Macro edit menu
: go to seciion 3.8.4 Mode edit menu
: go to section 3.8.5 Setup menu
Rc14069m (Farcan & Skyhawk) Universal RF Remake
3.8.1 Preprogram menu
Prepmgrammed code set can be stored tn DVD, TV, VCR, CBL. SAT Mode.
EnterIng Preprogram Mode
1) Press Custom button for 3 set: to gei into Cuslomize Mode
2) Scroll Jog dial to select Preprogram Menu
3) Press Jog Dial to go into Prepmgram Menu
Exit of Prepmgmm Mode:
1) Pressing me Custom button,
2) Time Out of 30 second
3) No Operation for 2 sec while “OK“ show
u.d. ‘
u1 a p > u 1 1 amount!“mrmnmwmmwnmurdfiknlhksn‘lHz.
1 n v D ¢ r_ lvemmymnwxu
u u a I emr'dld’vkg'l”,nth'lndfl'bsalsd'fnn‘p‘
u, a ,, J u Mia-mm.
L T v r r
u a ! ud' m=r=mgr.e.g'rf.uvamumusfivmnv
1 3 amauiwm.
r 4 n
r ud ' ensr'dig'l’.e.g'2‘,wh'am‘d’mséw'TIhen'p‘
"1 u D J v
r s A r r 4 v mnrgimm
r 4 o 2
fig- mgr-am 2.91 n- w lnd'd‘m sum -a- m. ‘p’
1 5 smhroflesecund
r. 4 o 2 3
n a: ifkfigk in "mm
um . Ix rib-dink an vzid
“f .
u 1 s u 1 -| : wmnwmsmm
. c K n =|r n v
0: n u. 'd‘ or ‘n‘ fur (vm sew-as Wis we show;
u x x x x x : nubackhmmmrspfly n.moperafiwlmmossmmdswme'0i<‘m
RC1406901 (Falcon & Skyhawk) Universal RF Remote
3.8.2 Learning menu
IR code of the other remote can be stored to all other than “LIGHT", "CUSTOM", "MACRO",
"MODE“, "INPUT" or "ZONE 2", and Jog button in every Mode.
Entering Learn Mode
1) Press Custom button for 3 see to get into Customize Mode
2) Scroll Jog dial to select Leam Menu
3) Press Jog Dial to go into Learn Menu
Exit of Learning Mods:
1) Pressing the Custom button.
2) Time Out of sosemnd
—‘. v ufl
u 2 o v > u 2 1 .wai'ngtflsamskeyispvesssd
L n v D L K E v
‘ / g 1: it me Pmssad hey Is "with
u u; u E; Leif gr szhnnreuadkeyisvaid
u z n n E u z - : Wmfixtwwww‘ds
L r v i L R r R v
u‘ n E Ind.
i v \
Mode . z 2 :warl2ngtersanslkmmandsauewivsd
t L R E A u v
ui a / t n' rime received mmands m tnvnlh
r u u in iiillhereuewedcomlndsuevafid
u z a n
NEr-r uz - :shflwstamosems
s r F A n L
ud
2 s : showslolmosem:
I. 0 K
RC14069EI1 {Falcon & Skyhawkj Universal RF Remote
3.8.3 Macro menu
Entering Macro Mode
1) Press Custom button for 3 sec to get into Customize Mode
2) Scroll Jog dial to select Macro Menu
3) Press Jog Dial to go into Macro Menu
Exil of Macro Menu:
1) Pressing the Custom button.
2) Tlms Out of 305econd
3) Afler successful Micro command programming
4) When Macro key is press during Macro editing
”l
u 3 0 p > UF3 0 : go to section 3.8,3.1.Macm editmsnu
L E D I T L 1
| | p D- U 3 1 1 | : goiosection 3.8.3.2.Maoronamemenu
E L
RC1406901 (Falcon & Skyhawk) Universal RF Remote
3.8.3.1 Macro Edit Menu
A maximum of eight commands can be stored into each Macro.
A maximum of eight Macro can be stored into the remole controller.
u 3 u 1 p ’ u a u n|| zwailinglorsomekey-plessed
r 1 r K E v
k kt u "Macro" key Is pressed.
m me comenu o! selewed Macro are erased.
m: me pressed key is mm!
M p r u 3 o n 1 I: smmmilesomskeyisbeenpresmg
I. 5 L s E T |
I: a g 2.1 n: the pressed kayis recessed
v 5 w
, Mode r 5 u 3 o n z : wamnglorsamekeyispressed
A i L K E v
u a q:,/ = q: n"Macro"keryrs pressed,
3 ‘ some commands are set to (he esteem Macro.
u 3 o a n 5
L a : u alu n 2 : showswhlle some kaylsbaen Dressing
u S L T
x=3
I u
, r
“i“
n Wx@,x:x+1
s:i1x4
0 n Q : showshriwnsmnnds
u xlx x xlx :gnbad u 4 3 0 : gotosecfion3.8.4.4 ModeAssign menu
|. A S S G N L D V D
3.8.4.1 Mode Add menu
There can be more than one "DVD"
RC1406901 (Falcon & Skyhawk) Universal RF Remote
TV‘ "VCR“, "CBL" and "SAT" Mode in the remote.
p > I: 4 U 1 : showshrlwnsecunflsmeflgnhlvlndeEdhmenu
L D V D X x=xH
e.g,1ha female already has 2 Wm, ‘x’ 591111 3,
In case nl Made amen added Mode is planed m1heend M alder
D P u 4 E 1 e.g,uuremModeordensus hllm
l T V DVD,TV,VCR.VCR2,CBL,SAT.CD,MD,CDR,WDZNBPT
The" Add DVD. Mode under becomes as MUM
DVD, TV. VCR. VCRZ. CBL. SAT, CD» ND,CDR,DVDZN€1—T,DVDS
Mode The mmum numberofnddlfl plural Mod! aith
O-E. DVDS. TVS, VCRZ 051.2 are maximum.
0 A 0 0 P > I) 4 U 1
l S A T l S A T x
u 4 0 v > u 4 U - : Menmsth,shmlumsecmsm=n goandfi Edilmenu
l. A D D L F U L L
3.8.4.2 Mode Sort menu
u l 1 n n > u 4 1 1
r n v u r v r
a u a a) u
u a 1 o p > u 4 1 1
l T V V C R
u d d u
v v
mm. . . Mafia r
A A i
. , 4 .
4|0 D>u311 >uA19 'shmlormosemrds
l N E T - T D V D 0 K MgolnModeEnllmznu
All other than “AMP" Mode can be sorted.
In case of surfing, the first selected Mode is placed in front of second selected Mode. e.g, current
Mode order is as follows.
DVD, TV, VCR, VCR2, CBL, SAT, CD, MD. CDR. DVD2, Net—T
Select "VCR2" first, then select MD second, Mode order becomes as follows.
DVD, TV. VCR, CBL, SAT, CD, VCRZ, MD, CDR. DVD2, Net-T
Reuoegm (Falcon & Skyhswk) Universal RF Remote
3.3.44; Mode Delete Menu
All other than "AMP" Mode can be deleted.
U4 2 0 9
LD V D
d u u d
ul4 2 0 p
LIT v
u d
.Mede .
| p > u 4 2 9 "I :sh0wsfor|wosewnds
|. O K menguia ModeEditmenu
RC1406901 (Fa/con & Skyhawk) Linn/arse! RF Remote
3.8.4.4 Mods Assigned Menu
The Mode can be assigned and changed to each input
Therefore. if Input is changed, Mode man also be changed to the favorite Mods simultaneously.
u 4 3 a u A a 1 p :shmvslmcunenlee
k D v u u v D vamivass’un-dIGMIwm-dlnvm.
u u u d a n
v v
4 3 a u A a | n
. v 1 l T v
a a u
v a , v
lap-n Mod:
‘
u a a M
11430 uASI p >utzia ahmmrmuwm
LI a n N E r - r [0 K MwmmdaEmlmunu
RC1406901 (Falcon & Skyhawk) Universal RF Remate
3.8.5 Setup Menu
The remote setup informations can be stoned to PC and restore by PC.
Entering Setup Mode
1) Press Custom button for 3 sec to get into Customize Mode
2) Scroll Jog dial to select Setup Menu
3) Press Jog Dial to go into Setup Menu
Exit of Setup Menu:
3) Pressing the Custom button.
4) Time Out of 30 second
5 o p > u 5 o o : got03.6.5.1Eackupmenu
I. E C K U P t T D P C
_A
u d
u 5 1 p , u 5|1I0 igotu3.8.5.2IDmenu
L| D I. ul 1
u d
5 2 1 p > u 5 2 0 zgntu!.8.5.3Resekmeflu
L R E s an L N o
u d
u 5 3 p b u 5 3 0 : gotcajfm lR/RFmenu
L I R I R F L I R ThislsnotdwspmyedinremmecomolvcimuulRFtransminitglunmon.
a.
RC1406901 (Falcon & Skyhawk) Univelsa/RF Remote
3.8.5l1 Backup Menu
The all of remole daia and infon'nalions can be stored to PC and resmre by PC.
u.d.
'I|
,_
3.8.5.2 ID Menu
The ID of ONKYO preset code is changed.
' Going into communicafinn mode with PC
Pushing the oniy 'Cuslbm" button can sllp out of this mode.
I: the and a! processing by PC opemllun
: shuws rum seconds man go to Normal display
: Slipping cum lnis mode by pressing 'Cuslum” button. transmission error. arsomalhlng wmng,
shows for two seconds then go m Normal display
u510 p>0519 | :SenoID=1.
I. I D 1 L 0 K | showsfoltwoseoondsthengnmNonnm display
u d
u151 1 | I p > u51 9 :SenoID=2.
l] I D? 2| L 0 K shuws fonwo seconds |hen gomNormal display
u 11
”F5 1 z p ’ us 1 9 :SettolD:3.
LI I D 3 L 0 K showsfoflwcseconds then go to Norma| display
The current value ls displayed first
D and Custom code table
ID=1 ID=2 ID=3
D202 D209 DZOA
D260 D204 D207
DZAC 0205 0208
DQGD D203 0206
Rcmoesm {Falcon & Skyhawk) Universal RF Remote
3.8.5.3 Reset Menu
All of the remote data and informations can be cleared and set to default condition.
520 p>u529 :Nachangs.
l N oA L 0 K showsfnrlwnsewndslhengolo Normald’isphy
u u
u 5 2 1 p > u 5 2 9 : Allnlremmedslasndimormsiinnsareclwedandsetmdeiauiiwnflilhn.
i. v E s L 0 K simwsi'urfinnsewnnsihen gaiuNmmaidisphy
3.8.5.4 IRIRF Menu
Transmission can either be IR or RF.
Transmitting LED lights in red if R is selected, transmitting LED lights in green if Rf is selected.
u 5 3 o p > u 5 3 : SeilulRiransmissiun,
I. 1|R I. O K shvws(orlwosecnndsthengotnNmrmaldisplay
J . . .
u53L1 u5|32 533 u539
LR F L | D 1 LC H 1 L0 K
d u d u $1
v E ,
|D:0m9.AioF CHOioS
A A
u d u d
uii u 5 a a
Ll D LC H 4
a d
The current value is displayed um.
RCMOGQW {Falcon & Skyhawk) Universal RF Remote
3.9 RF Home ID and Device ID Setup
The communication link between R01406901 and Dongle is uniquely matd'ied by a set of CH ID
and Device ID — selectable by end user. The purpose of the Device ID is to prevent confusion if
user has installed with more then 1 set of receiver. CH ID will avoid interference between
neighbours with similar AV Receiver system installed.
CH ID consists of digit: 0, 1, 2 & 3
Device ID consists of digit: 0 to 9, A to F
Please refer to Section 3.9.5 Setup Menu to enter IR/RF menu and refer to section 3.9.5.4
IRIRF Menu to select the CH and Device ID.
3.10 Battery Low Indication
Upon power up, if the RAM has not been oormpted, the remote control will maintain the user
settings (programmed Ids).
Upon power up. if RAM has been corrupted, the remote will be resetto its original default states.
That is AMP will be the default mode, and each mode will have its initial dekult ID. Please refer
to section 3 on the default table for all devices.
3.11 Power down mode
In this mode, a minimum of current is consumed to maximise battery lifetime. This mode is
entered when no actions need to be executed. When the user presses a button on the keypad,
normal operating mode is entered. No memory setting is lost.
3.12 Stuck Key mode
Stuck Key means that a button has been pressed for a very long time in normal operating mode.
To preserve battery power, the remote will shut down about 80 seconds after the last key
transition to consume minimal power. After all keys are released, the remote resumes normal
operation.
Following graphic shows when this power down mode is entered:
STUCK KEY TIMEOUT
lR Transmit // / /
I /
Keypress J /
Time ‘ / i , i / I
' em 2 5s A
T T mt mm. A A
Key Pressed Keyslill pressed mum tSseccndS Remote resumes Cadairammissicn
Code starts trammkling Rsmntegoes in stuck key mode. mine operation aalvated w valid key
code‘lransmlsslon 510m afler slum my situation neutralized
' Stuck K9] Timeout is typical 60 seconds, actual timing depends on the pmocoi transmitted
Typical stuck key time is between 55 and 65 seconds, except for IR protocols with exceptional
long or short repeat timings.
RC1406901 (Falmn & Skyhawk) Universal RF Ramos
3.13 Key Numbering
Integra
Rowassm (Falcon 5 Skyfiawk) Universal RF Remote
3.14 Function Table Overview
Code table Falcon and Skyhawk
Funcfion ‘ Symbol
Falcon Skyhawk
Prepro
Pre-ro number
EH LIGHT
”war on
STANDBY Khmer on
TV POWER ' Pdwer
Vol ~
TV / Video. TV /VCR
meesm (Falcun a. Skyhawk) Universe: RF Rama‘s
Function Symbol Falcon Skynawk
Prepm
Pre re number
SLEEP yes yg
DISPLAY Dlsplay DISPLAV yes yes
PREVTOUS Previous Channel PREVIOUS yes yes
40 MUTING Mme MUTLNG yes yes
41 TOPMENU Tme TOPMENU yes yes
ASPECT Aspem, Wide TVASPEC’T yes yes
42 AUDIOADJUST AUDTOADJUST yes yes
MENU (Disc) Menu MENU yes Les
43 RETURN Exit RETURN yes yes
| 44 SETUP \SempMenu,enide SETUP yes | yes
45 CURSOR me A yes yes
46 CURSOR Down \/ yes yes
47 CURSOR Levi < yes yes
43 CURSOR R m > yes yes
49 ENTER Enler ENTER yes yes
0k yes yes
so |<< N|SS|ndex)Previous lid yes yes
51 PLAY Play > yes yes
52 >>y (VISSlndmdNext >>|
53 << FasiRawind «
54 PAUSE - I
REVERSE PLAY
“inward
Il>ord
Lasl Play
58
.w Rewind
”Backward
59
ye Slew FOnnard
60
RANDOM shulfle (One)
SURROUND
AUDIO
< l
Audln
n—
‘ Is
as
SUBTITLE Lenguege SUET|TLE
54 STEREO STEREO
CLEAR (Memo) Clear CLEAR
as PURE AUDIO PUREA
REPEAT Repeat REPEAT
as DIRECT DIRECT
A—B Ra-eatA—B A43
67 DSP-  yes yes
MEMORY Mernery. Program MEMORY yes yes
59 TEST TEST yes yes
PLAYLIST PLAYLIST yes yes
70 CH SEL CH SEL yes yes
ALBUM ALBUM yes yes
71 LEVEL-  13st 55 “1
A9 ENTER Emer ENTER 13st 97 1s
0k ~
50 |<< MSSTnaexwmmus Ind 026!) 93 13 Men 1E 15
Play P 13:50 15 13 DZGD 1a 1a
VISSlndex Next D25!) 94 1s D260 m (a
FastRewind <1 0st 1A 1a 13st as 11:
l] 0250 1F 1;
b man 1a 15
"l men 13 13 0st 10 ‘IE
”forward »
D25!) 19 1a DzBD 3A lb
D260 18 18 ‘~ '
Ilord
Last Play
I” Rewind
”Backward
Slaw Forward
Shume (One)
61 SURROUND < l
AUDIO Audin
62 THX n»
ANGLE Angle
63 ALL CH STEREO
SUBTITLE Laflguage
64 STEREO
CLEAR (Menmmear
as PURE Aumo
REPEAT Rspsal
55 DIRECT
A—B Re ealA
E7 DSPA
SEARCH Scan
EB DSPA
MEMORY Mem Program MEMORY
as TEST
PLAVLIST
70 CH SEL
ALBUM
71 LEVELA (LEVEL
ARTIST ARHST
72 LEVEL+ LEVEL> D260 42 1b
GENRE GENRE
74 EJECT Eiec! a 0st 91 15
OPEN [CLOSE [126C D8 121
caps cAPs
D260 BE 13
D26!) 56 1s
stn 49 713
RC1406901 (Falcan & Skylvawk) Universal! RF Remote
Key Function Symbol AMP on
NB Preset Cede FreseI Code
14 Prepro Cuslnm Dela Type Cuswm Dabs 71,1
Prspm number w
73 AUDIO SELEGTOR A SEL DZSC D9 18
DELETE g DEL
75 LATE NIGHT L NIGHT
LANGUAGE LANGUAGE
76 Rs-EQ Rs—EQ
LOCATION LOCATION
77 SchIing Jog upward
78 SchIin J dflwlwmrd
79 Pressing Jag
In Ill D'VD
Inplll VIDEO ‘I
Input VIDEO 2
In Ill VIDEO 3
Inpul VIDEO 4
Inpul vao 5
In III VIDEO 6
Input VIDEO 7
In ul CD
In uI PHOND
1an TUNER
In ulTN’E
Input TAPE 1
Input TAPE 2
In m MUSIC SERVER
mpm INTERNET RADIO mu
#1: The same as 7135 of AMP Made
352: The same as $136 ofAMP Made
#3: The same as #40 of AMP Mode
Preset and Learnable area
Learnable area
RC1406901 (Fa/can & Skyhawk) Universal RF Remote
3.14.2 DVD Code Table
Code table Falcon and Skyhawk
Kay Fumon Symnm
No,
Prepm “BEE
Prenronumber
Plywean
, —Tn=sa.neas#1ofrvmone
Tutannumnfivmda
mesa-aunts: a: TV Made
Thesameasdmniwmue
Tm sam- aflas 17! TV Mada
Ihe same as San om! Mode
9 1g: 1 1 -'1 D , ‘ ' “Q
10 use 2 ZAEC l§
11 aDEF 3 SDEF
12 4131—11 4 AGHI
1: 5m. 5 5JKL
14 6mm 6 sumo
15 7mm 7 7PnRs
15 MW a 81W
11 9wx¥z 9 swxvz
19 +10 +10 +10
._,. _ A 1.
19 o 0 0
20 ENTER Enter ENT
DIRECTTUNlNG DTUN
21 CUSTOM I CUSTOM
22
23
24 ZONES ZONE3
25 MACRO MACRO
26
27
28 ZONEZ ZONE2
zn MODE MODE
30
31
32 INPUT INPUT
33 014+ cm 01-14
DISC+ Sta u DI$C+
34 CH- cnr CH-
Dvsc - Step down DISC -
35 vow Von VOLA
as VOL- Vul- VOLV
37 DwMMER DwMMER
TV/VIDEO TVIWdan.TVIVCR w/wnso
RC14OGQO1 {Fa/Doll & Skyhawk) Universal RF Remote
Function
SLEEP
DISPLAY
PREVIOUS
MUTING
TOP MENU
ASPECT
AUDIO ADJUST
MENU
RETURN
SETUP
CURSOR
CURSOR
CURSOR
CURSOR
ENTER
<<
FLAV
»
<<
PAUSE
REVERSE PLAY
STOP
>>
REC
LAST PLAV

RANDOM
SURR
AUDIO
THX
ANGLE
ALL ST
SUBTITLE
STEREO
CLEAR
PURE A
REPEAT
DIRECT
A-B
< DSP
SEARCH
DSF' >
MEMORY
TEST
PLAYLIST
CH SEL
ALBUM
< LEVEL
ARTIST
LEVEL >
GENRE
Preset Code
Cuslnm Data T
DVD
Cuslom Data T a
RC7406901 (Falcon 8. skyhawk) Universal RF Remate
Funcllon
Preset Code
W M
Prepru number
AUDIO SELECTOR
DELETE
LATE NIGHT
I}
Scmlling Jog upward I
Scrolling Jug downward
#1: The same as $135 ofAMP Mode
#2: The same as 1&6 ofAMP Made
323: The same as #40 of AMP Mode
Preset and Leamable area
3.14.3 Net-Tune, TV and VCR Code Table
Code table Falcon and Skyhawk
RC1408901 (Falwn G. Skyhawk) Universal RF Remote
Key Function Syniml Net-Tune
Prepm
Prepro number
LIGHT Wm
POWER ON FINA-3:0" I 1:1st 114 1 1a
STANDBY l r Off uzac 47 15
TV POWER $3 yam /| fin» sum: as #1 of TV Mode
4 TV INPUT TV TVNideo INPUT The same as blianVMnde
5 TVCH+ TVCh+ + ThesameasfllMTVModE'
S TVCH- TVCh- - Ibesafiléasfllalwudde
7 Tvvou TVVu1+ + msamqauflSofn/Mode
8 TVVOL - TV V01- — The same as “G MWMDHE
9 1 .-'l 1 1 @,-'I 0202 D5 15
10 2 ABC 2 2 ABC D202 D6 13
11 3 DEF 3 3 DEF D202 D7 18
12 4GHI A 4GH| DZUQ ‘ D8 15
13 5 JKL 5 5 JKL 0202 09 13
14 GIVNO s sMNo rmuz DA 13
15 7 PORS 7 7 PQRS D202 DB 13
16 5 TUV B B TUV 0202 DC 1!
17 a WXYZ 9 9 wxvz D202 DD 13
18 +10 +10 +10 "‘
~ ~/ ~ — ~ - - I - - - , 1 ~
19 D 0 0 D202 DE 13 ,
20 ENTER Enter ENT ‘ ‘ '
D1RECT TUNING DTUN
21 CUSTOM CUSTOM
22
23
24
25
26
27
ZONE 2
MODE
IINPUT pa
33 704 + on + CH 1 1b
DISC + Step up 0150+
a 01+ cn— CH- 11260 D1 1h
Dlsc- Sta dawn DISC-
35 van Vol + VOLA #| #1
as VOL- Vol- vow 112 #2
37 DINNER D1MMER
TV 1 vao TV I Video, TVI VCR TVIVIDED
RC1406901 (Falcon & skyvvswk) Unit/else! RF Remote
Key Function Symbol Nat-Tuna Tv VCR
No Presetcade
it Frepru (30st Data Type
Prsem number m _
38 SLEEP sweep SLEEP
39 DISPLAY Display DISPLAY D202 BE 13
PREVlOUS Previous cnannaw PREVlOUS
40 MUTING Mute MUTING 113 143
41 Tina
AUDIOADJUST
MENU (DISC) Menu
43 RETURN Exit
44 SETUP SemDMenu,GuidE D202 9F Ta
45 CURSOR U A D202 00 ,1b
46 CURSOR Down v D202 c1 1b
47 CURSOR Left < D202 cz 1b
48 CURSOR Right > 0202 t 03 1b
49 ENTER Enter ENTER D202 01 15
0k
50 |« (VISSIndex)Frevicus D202 gu 1a
51 PLAY Pl > D202 5D 15
52 >> (Vlsslndex)NEx! D202 SF (3
53 << FaStstind <1 D202 51 1b
54 PAUSE I“ I] 0202 91 1B
REVERSEva b
STOP M I D202 | SE 15
» Moment » D202 so 1b
57 REC |jmra 0
LAST PLAY Last Pway 1am];
53 <| ”mm <1
|> SlowForwsrd I> ,
RANDOM snumuofle) RANDOM D202 93 1a
81 SURROUND <1 SURR
AUDIO Audio AUDIO
52 THx l-
ANGLE An Ia
ALL CH STEREO ALL ST
SUBTITLE Len u a SUBTITLE
STEREO STEREO
CLEAR (Memo) Clear CLEAR
PURE AUDIO PURE A
REPEAT Repeat REPEAT D202 92 1a
65 DIRECT DIRECT ‘ ~
NB RepeatA-B A—E
67 DSPv  E
MEMORY Memsm, ngram MEMORY
69 TEST TEST
PLAYUST PLAVLIST D202 QB 13
70 CHSEL CHSEL
ALBUM ALBUM D202 gs 1a

GENRE D202 9A 1a
Eject a
OPEN/CLOSE
CAPS CAPS D202 DD 15
RC14nb‘901 {Falmn a Skyhawk) Universal RF Remote
Kay Funmian symbol Ne une TV VCR
N0. Presel Code
# Preprc Cuslnm Data Type
Prepro number W
73 AUDIO SELECTOR A SEL
DELETE A DEL D202 D1 13
75 LATE NIGHT L N‘GH’T
LANGUAGE LANGUAGE D202 9D 13 ~
76 Ra-EQ RO'EQ
LOCATION LOCAT‘ON
77 Screllvng Jog upward
78 Sub ' g Jog dwwnward
79 Pressing Jog
#1: The same as #35 of AMP Mode
#2: The same as 1:39 of AMP Mode
#3: The same as #40 of AMP Mode
Press! and Learnabla area
‘ Leamable area
RC1405901 (Falcon & Skyhawk) Universal RF Remote
3.14.4 CDR and Cable Code Table
Code table Falcon and
Skyhawk
Key Function Symbol CDR Canwe
No. Presm Code
if Prepm Cumom Dam Tm
Plepro number m
side LIGHT '
1 POWER on
2 STANDBY
3 TV POWER
4 TV INPUT
5 TV CH +
5 TV CH -
7 Tvv0L+ TVVol+ asvnsofwmme
a TVVOL— Tvvm- - unsmwmd-
9 1@-‘/ 1 1@..' DZAC 55 1a
10 use 2 ZAEC [mo 55 15
11 a DEF 3 3 DEF DZAC 57 1a
37 DIMMER
TV/VIDEO
TVI Videu, TV/ VCR
RC1406901 (Falcon & Skyilawk) Universal RF Remote
Function CDR
PreseICcds
it Prepra Cuslum Data Type
Prspro number m
SLEEP Slee SLEEP ‘ L ,
39 DISPLAV Display DISPLAY DZAC 59 1s
PREVIOUS Previous Channel PREVIOUS
40 MUTING Mute MUTING
TOP MENU Title TOP MENU
ASPECT Aspefll. Wide TV ASPECT
42 AUDiO ADJUST AUDIO ADJUST ‘
MENU (Disc) Menu MENU
RETURN Exit RETURN
SETUP Selup Menu, Guide SETUP
CURSOR
Play
(wss Index) Next
PAUSE
REVERSE PLAY
REC
LAST PLAY Last Play mark!
58 <| .« Rewind - l ;
Maacmord , ' ,
59 \> Slaw Forward l— ~~ ~'
so RANDOM Shuffle (One) RANDOM
51 SURROUND < I SURR
AUDIO Audiu AUDIO
62 THX I > THX
ANGLE mm ANGLE
63 ALL CH STEREO ALL ST
SUBTITLE Language SUBTITLE
64 STEREO STEREO
CLEAR (Memo) Clear CLEAR
55 PURE AUDIO PURE A
REPEAT Repeal REPEAT
as DIRECT DIRECT
A-B Repeal A-B A—B
s7 DSP - < DSP
SEARCH Scan SEARCH
65 DSF + DSP >
MEMORY Memery. Program MEMORY
69 TEST TEST
PLAYLIST PLAYLIST
70 CH SEL CH SEL
ALBUM ALBUM
71 LEVEL - < LEVEL
ARTIST ARTlsT
72 LEVEL + LEVEL >
GENRE GENRE
74 EJECT Ejsc1 5
OPEN (CLOSE
CAPS CAPS
RCT406901 (Falcon 8: Skyhswk) Universal RF Remole
Key Function Symbol CDR Came
Nu. Fresetcade
# Pmpro Custom Data TyE
AUDIO SELECTOR
DELETE
75 LATE NIGHT L NIGHT
LANGUAGE LANGUAGE
7S Rs-EQ Re—EQ
LOCATION LOCATION
17 Sum!“ Ju u ward
7a Scrolling Jog downward
7s Pressing Jog
#7: The same as #35 afAMP Mode
#2: The same as #36 0' AMP Mode
#3: The same as we ofAMP Mode
Preset and Learnable area
, Learnable are
Xed TV command area
RC1406901 (Falwn & Skyhawk) Universal RF Remote
3.14.5 MD and Satellite Code Table
Code table Falcon and Skyhawk
Key Funclinn Symbol MD Salelllm
N0, Preset Cutie
# Prepro Cusmm Dan Tue
Prepro numbel
side LlGHT
1 POWER ON waer On I
2 STANDBY r or! 1
3 TV POWER Pdwsr / I
4 TV lNPUT TV TVMdeo INPUT a sami as m of TVMod-
5 TVCH+ TVCh+ + mesameasuzaofwwloae
s TVCH- wen» A Thesameasfluwl‘TVMode
7 w vm + + m. same as was alWMode
8 TV Vol - - The same as ”35 01W Mods
9 l @.>' I | —'I DZAC 47 la
10 zAac 2 mac DzAc 43 1a
11 3DEF 3 SDEF DZAC 49 ‘la
12 4130-1: 4 mm DZAC AA 13
13 5JKL 5 5m. DZAC 45 1s
14 s MNO s 6 MNO DZAC 41: la
15 7 PQRS 7 7 PQRS DZAC' 4D 1a
16 8 TUV B s TUV D2AC 45 la
17 swxvz 9 swxvz one 4F 13
15 +10 +11) +10
-I-- -----1 D2AC 51 1a
19 a u a Dem: so 1 la
20 ENTER Enler ENT 0260 17 1s
DIRECT TUNING D TUN
21 CUSTOM CUSTOM
ZONE 3
MACRO
28 ZONE 2 ZONE 2
29 MODE MODE
3D
31
32 INPUT lNPUT
33 CH 1 on + OH +
Dwsc + Step up [use +
34 CH - Ch - CH -
DlSC - Slap dawn DISC — ~
35 VOL + Vol 4 VOL /\ ”1 fi
36 VOL - Vol - VOL V ”2 ”2
37 DIMMER DlMMER ‘
TV/VIDEO TV/wdeo,TV/VCR vameo
Remasgai (Falcon & skyhewk) Universal RF Remote
Key Funmion Symbul MD Sateilile
No. PreselCode
# Prepm Custom Data T e
Prepmnumber m
33 SLEEP Sleep SLEEP
39 DiSPLAY Display DISPLAY 0250 11 is
PREViOUS Previaus Channel PREVIOUS
40 MUTING Mine MUT|NG #3 m
41 TOPMENU Tnie TOPMENU
ASPECT Aspect, Wiee TV ASPECT
42 AUDIOADJUST AUDIOADJUST
MENU Disc Menu MENU
43 RETURN Exit RETURN
44 SETUP Setup Menu Guide SETUP
45 CURSOR Up I\
45 CURSOR newn v
47 CURSOR Left <
45 CURSOR Righl >
49 ENTER Enter ENTER
Ok ; a ,,
50 << ISSIndsx Previnus D260 DD 1a
51 PLAY Pia b D250 DA 1;
52 » VISSIndsx Next 0250 no 15
53 << FaisSwind <4 Dzec 01 1b
54 PAUSE Dzac DE 1a
REVERSEva b
55 STOP ”I met: OB ie
55 >> “award 0256 00 1b
57 REC llord Dzec DF 1a
LAST PLAY Last Piey Leamey
58 <| Rewind <-
"Backward
59 > SluwForward I»
so RANDOM Shuffle One RANDOM D26!) 15 13
G1 SURROUND 4! SURR
AUDiO Andie AUDIO
52 THX I» THX
ANGLE Angie ANGLE
as ALLCHSTEREO ALLST
SUBTITLE Language SUE11TLE
54 STEREO s-rEREo
CLEAR 1Meme)Cieer CLEAR 025C, 14 15
65 FuREAUDiO PUREA
REPEAT Repeat REPEAT nzac 1a 13
as DiREcT DIRECT f ‘ ‘
A-B RepeeiA-E A»B
57 DSF— 
MEMORY MSmsry,ngram MEMORY met: 10 1a
TEST TEST
PLAYLiST PLAYLIST
CHSEL CHSEL
ALBUM ALBUM
LEVEL- 
GENRE GENRE
74 EJECT Eject : DzAc 45 k:
OPEN/CLOSE
CAPS CAPS
RC1406901 {Falcon & Skyhswk) Universal RF Remote
Key Function wmbm MD Satellite
No. Preset Dude
# Prspro Cumm Data T s
Pmpm number m
73 AUDIO SELECTOR ASEL
DELETE A DEL
75 LATE men-r L mam
LANGUAGE LANGUAGE
75
REED RerEQ
LDCAT‘ON LOCATION
Scrolling Jog upward
78 Snmlli J dnwwward
79 Pressngog
#1: The same as $235 of AMP Mode
#2: The same as #36 of AMP Mode
M: The same as #40 of AMP Mode
Preset and Learnable area
‘ Learnable‘area '
Fixs TV command area ‘
R814DG901 (Falcon & Skyhflwk) Universal RF Remote
3.15 Description of error handling
3.15.1 Watchdog tlmer
The micruountnoller has a built in watchdog timer, which will reset the controller if the program
operation should get corrupted.
3.15.2 Stuck key function
A stuck key function prevents that the batteries are drained when a button remains pressed for
over 60 seconds (e.g. by placing somelhing heavy on top of the remote). The remote will stop
sending automatically alter 60 seconds and will resume operation when all keys are released.
3.15.3 Handling of multiple keys
If more than one key is prased simultaneously. IR transmission will stop until all keys are
released. The transmitting LED will tum off.
Example : Two (er more) keys praised simultanenusly.
SE: 9 KEVA PRESSED
KEV a FRESSED
DATA DATA DATA
A A 5
4. No mans; F—
] Iransmissicn
unm hath keys are released
was
RCMDEQW (Fa/nun & Skyhawk) Universal RF Remote
4. External Interface Requirements
4.1 Hardware interfaces
The software has to interact with:
I Input devices
- Output devices
- Storage devices
4.2 Input devices
4.2.1 Keys
These buttons are located on the main body of the remote. house in the top part assembly.
Press these buttons activates and make contact with the carbon pad on PWB directly.
4.2.2 Side key
This key mainly to ONIOFF the backlight of the remote.
4.2.3 Jog Dial
This input device is a combination of a rotary switch and a tack switch. The rotary switch enable
the user to scroll through and select the item in the menu that is display in the LCD panel. The
Lack switch enable the user to activate the transmission of the Mode or Selector input code that
user has select.
4.3 Output Devices
4.3.1 RF Transmission
The module sends signal via a 433.92MHZ RF link usable in USA, Canada and Australia. New
Zealand and EU market.
4.3.2 Infra Red Emitting Diodes
The IR LEDs are used to transmit the selected codes and protocols via IR.
4.3.3 Colour LEDs
The red and green colour indicating LED are located at the top of the remote. Under the
MACRO, MODE, INPUT and ZONE2 key, each have a GREEN colour LED .
Rc14ossu1 (Falcon & Skyhawk) Universal RF Remme
4.4 Storage Devices
4.4.1 EEPROM
EZFROM is use to store succwsiully Ieamed IR codes: device mode status and LCD display
status so that the remote is able to operate from the previous selected made even after battery
replacement.
RC1405901 (Fa/can & Skyhawk) Linn/elm! RF Remote
5. Universal ID Load List
Notes: User need to key in a ‘0” follow by the 3 digits code indicate in below table to select the
Device ID

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 60
Creator                         : Canon
Create Date                     : 2003:08:27 18:32:01
Author                          : 
Producer                        : 
Title                           : 
Subject                         : Image