Philips Electronics M132 LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	391775
Application ID	Ublgm/hlnEaYcb3KeQm1PA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.73kB (134111 bits)
Date Submitted	2004-01-26 00:00:00
Date Available	2004-01-26 00:00:00
Creation Date	2004-01-26 11:03:58
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2004-01-26 11:04:14
Document Title	User Manual

Exhibit 3
Installstion and Operating instructions
Product Information
Product Features
BRILLIANCE 190P5EG/190P5EB/190P5ES
The best productivity solution
Maximum comfort for maximum productivity
{ Just-right positioning with range Super Ergo base
{ Display diversity with portrait and landscape options
{ Extra efficiency with wide viewing angle
Outstanding front of screen performance
TM
{ Best-ever sharpness and brightness with LightFrame
{ Accurate color displaying more than 1.3 million pixels
{ Displays VGA and DVI signals with dual input
Lower Total Cost of Ownership
{ Low power consumption - 20 percent savings than industry average
{ Kensington anti-thief lock-ready for added security
RETURN TO TOP OF THE PAGE
LightFrameTM for Windows
Introduction
Philips LightFrameTM feature enriches the experience of pictures and video on a Philips monitor.
LightFrameTM will boost the brightness and sharpness of photos and videos on the monitor
screen.
To control the LightFrameTM feature in your monitor, you have to install the LightFrameTM
application which you will find on this CD-ROM.
Note
Philips LightFrameTM will only work with monitors that have been built to use this software. Earlier
Philips monitors or other manufacturers’ monitors will not work with this special software. It is
recommended that you install this software only on a Philips monitor designed to use it. These
monitors can be identified by the LightFrameTM logo on the front of the monitor.
LightFrameTM will work with true Windows-based programs and DOS-based programs that
operate in a Windows environment. It will not work with DOS-based programs operating only in a
DOS environment.
Language Selection
While English is the default language of LightFrameTM, the User Interface can be set up to operate
in Dutch, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese
or Korean.
Installation
1. To install LightFrameTM, place the CD in the CD-ROM drive.
Page 1 of 9
Product Information
2. Next, when the menu of items on the CD appears on your screen, click on 'Install
3.
4.
LightFrameTM'.
Now, follow the on-screen prompts to properly install the program. The software checks to
see if you have a compatible monitor. You must agree to the license agreement terms for
the software to install.
After installation, LightFrameTM automatically loads and the icon appears in the taskbar.
Notes
If LightFrameTM detects that your monitor is not LightFrameTM compatible, a message appears on
the monitor screen. If you see this message, you can select to abort or continue the installation.
However, if you continue the installation, LightFrameTM will probably not work on the monitor.
How to use LightFrameTM
After installation, LightFrameTM starts up automatically whenever the computer is started.
For information about using LightFrameTM please refer to the help information which is available
after installation.
Compatibility
This version of LightFrameTM is compatible with
Windows® 95
Windows® 98
Windows® Me (Millennium Edition)
Windows® XP
Windows® 2000 Professional Edition.
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type
TFT LCD
• Screen size
19" / 48.26 cm diagonal
• Pixel Pitch
0.294 x 0.294 mm
• LCD Panel type
1280 x 1024 pixels
R.G.B. vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area
376.32 x 301.06 mm
• Display Colors
16M colors
SCANNING
Vertical refresh rate
56 Hz-76 Hz
Horizontal Frequency
30k Hz-82 kHz
VIDEO
• Video dot rate
135 MHz
• Input impedance
- Video
75 ohm
- Sync
2.2K ohm
• Input signal levels
Page 2 of 9
0.7 Vpp
Product Information
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities
Positive and negative
• Video interface
Dual input: D-Sub (analog) and DVI-D (digital) are
available and user selectable
• Light FrameTM
Brightness and sharpness enhancement
Audio
• Loudspeaker
4W Stereo Audio (2W/channel RMSx2, 300 Hz-12
kHz, 16 ohm, THD=10%, PMPO 32 Watts)
• Headphone connector
3.5mm mini jack
• Input signal connector
3.5mm mini jack
• Stand-alone audio output
Audio output can still function whenever there is an
audio source playing, even there is no video input.
Note: The volume adjustment can not function under
the following conditions:
1. A warning message appears on screen
2. No audio input
Optical characteristics
• Contrast ratio
700:1 (typ.)
• Brightness
300 cd/m2 (typ.)
• Peak contrast angle
6 o'clock
• White Chromaticity
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
• Viewing Angle (C/R>10)
Upper >85° (typ.)
Lower >85° (typ.)
Left >85° (typ.)
Right >85° (typ.)
• Response time
<25 ms (typ.)
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors
are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to
a predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the
down button to go to Adjust Color and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you
change either of these, the monitor will exit the sRGB mode and go to a color temperature
setting of 6500K.
For more information on sRGB, please visit: www.srgb.com
Page 3 of 9
Product Information
Note: sRGB mode is not available while 'LightFrameTM' function is activated.
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
• Maximum
1280 x 1024 at 75 Hz
• Recommended 1280 x 1024 at 60 Hz
15 user definable modes
15 factory preset modes:
H. freq (kHz)
Resolution
V. freq (Hz)
31.5
640*350
70
31.5
720*400
70
31.5
640*480
60
35.0
640*480
67
37.5
640*480
75
35.2
800*600
56
37.9
800*600
60
46.9
800*600
75
49.7
832*624
75
48.4
1024*768
60
60.0
1024*768
75
69.0
1152*870
75
71.8
1152*900
76
63.9
1280*1024
60
80.0
1280*1024
75
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. If an input from a keyboard, mouse
or other input device is detected, the monitor will 'wake up' automatically. The following table
shows the power consumption and signaling of this automatic power saving feature:
Power Management Definition
Page 4 of 9
Product Information
VESA Mode
Video
H-sync
V-sync
Power
Used
LED
color
ON
Active
Yes
Yes
< 50 W
Blue
OFF
Blanked
No
No
<1W
Amber
This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS
has determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimension (WxHxD) *
425 x 377 x235 mm (in lowest position)
• Weight
8.6 Kg
• Tilt / Swivel
-5° ~ 25° / + - 65°
• Height adjustment rang
130 mm
• Portrait display
90° rotation counter clockwise
• Power supply
100 — 240 VAC, 50/60 Hz
• Power consumption
50 W*
• Temperature
5° C to 35° C (operating)
-20° C to 60° C (storage)
• Relative humidity
20% to 80%
• System MTBF
50K hrs
• Cabinet color
190P5EG: Light Gray
190P5EB: Black
190P5ES: Silver
* This data is subject to change without notice.
* Resolution 1280x1024, standard size, brightness max., contrast 50%, 9300° K, full white pattern,
without audio/USB.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts.
Signal pin assignments are listed in the following table:
Pin Signal
No. Assignment
Page 5 of 9
Pin Signal
No. Assignment
Pin Signal
No. Assignment
Product Information
T.M.D.S. Data2-
T.M.D.S. Data1-
17 T.M.D.S. Data0-
T.M.D.S. Data2+
10 T.M.D.S. Data1+
18 T.M.D.S. Data0+
T.M.D.S. Data2/4
Shield
11
No connect
12 No connect
20 No connect
No connect
13 No connect
21 No connect
DDC Clock
14 +5V Power
22
DDC Data
15 Hot Plug Detect
23 T.M.D.S. Clock+
No connect
16 Ground (for +5V)
24 T.M.D.S. Clock-
T.M.D.S. Data1/3
Shield
19
T.M.D.S. Data0/5
Shield
T.M.D.S. Clock
Shield
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
Assignment
No.
Pin
Assignment
No.
Red video input
+5V
Green video input/SOG
10
Logic ground
Blue video input
11
Ground
Sense (GND)
12
Serial data line (SDA)
Hot Plug Detect
13
H. Sync / H+V
Red video ground
14
V. Sync (VCLK for DDC)
Green video ground
15
Data clock line (SCL)
Blue video ground
RETURN TO TOP OF THE PAGE
Page 6 of 9
Product Information
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
1) Tilt
2) Swivel
Page 7 of 9
Product Information
3) Height adjustment
4) Portrait display
Turn monitor from landscape view to portrait view.
Rotate the monitor body 90 degrees counter clockwise.
Page 8 of 9
Product Information
RETURN TO TOP OF THE PAGE
Page 9 of 9
Installing Your LCD Monitor
Installing Your LCD Monitor
Front View Product Description
UP and DOWN buttons are used when adjusting the OSD of your
monitor.
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also
used in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show
up.
VOLUME
VOLUME hotkey. When the LEFT and RIGHT arrow buttons are
pressed, the adjustment controls for VOLUME will show up.
OK button which when pressed will take you to the OSD controls.
POWER button switches your monitor on.
Automatically adjust the horizontal position, vertical position, phase
and clock setting.
LightFrameTM hotkey for mode-switching between full-screen mode
and multi-window mode.
RETURN TO TOP OF THE PAGE
Rear View
Page 1 of 2
Installing Your LCD Monitor
Kensington anti-thief lock
VGA input
Earphone jack
DVI-D input
PC audio input
AC power input
RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at 1280x1024, 60Hz.
Note: You can check the current display settings by pressing the 'OK'
button once. Go into the Product Information. The current display mode is
shown on the item called RESOLUTION.
You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the
best performance out of your monitor. This is included on this CD. Step-by-step instructions
are provided to guide you through the installtion process. Click on the link to know more
about this program.
More about
FP_setup04.exe
RETURN TO TOP OF THE PAGE
Page 2 of 2
Regulatory Information
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a
computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain
or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
RETURN TO TOP OF THE PAGE
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimites des appareils
numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces
limites sont conçues de façon à fourir une protection raisonnable contre les
interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil
produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas
installé et utilisé selon les consignes données, peuvent causer des interférences
nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence
d'interférences dans le cadre d'une installation particulière. Si cet appareil est la
cause d'interférences nuisibles pour la réception des signaux de radio ou de
télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant
en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les
mesures suivantes:
Réorienter ou déplacer l'antenne de réception.
Augmenter la distance entre l'équipement et le récepteur.
Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu l'approbation des services compétents en
matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent
Page 1 of 2
Regulatory Information
équipement.
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
RETURN TO TOP OF THE PAGE
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:01:26 11:04:14-08:00
Create Date                     : 2004:01:26 11:03:58-08:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 13
Mod Date                        : 2004:01:26 11:04:14-08:00
Creation Date                   : 2004:01:26 11:03:58-08:00
Metadata Date                   : 2004:01:26 11:04:14-08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools