Philips Bdp5506 F7 Owner S Manual E5WA0UD_EN_v3

Philips-Bdp5506-F8-Users-Manual-378972 philips-bdp5506-f8-users-manual-378972

E5WA0UD_EN_v3 bdp5506_f7_dfu_aen

BDP5506/F7 Mode d’emploi bdp5506_f7_dfu_aen Lecteur de disques Blu-ray BDP5506/F7 | PhilipsBDP5506/F7

BDP5506F8 to the manual ee733700-05ee-4f6b-9cb5-1dd5aa49a0b4

2014-12-13

: Philips Philips-Bdp5506-F7-Owner-S-Manual philips-bdp5506-f7-owner-s-manual philips pdf

Open the PDF directly: View PDF PDF.
Page Count: 68

DownloadPhilips Philips-Bdp5506-F7-Owner-S-Manual E5WA0UD_EN_v3
Open PDF In BrowserView PDF
E5WA0UD_EN_v3.book

Page 1 Thursday, March 24, 2011

1:43 PM

Register your product and get support at

www.philips.com/support

EN

User Manual

FR

Manuel d’Utilisation

ES

Manual del Usuario

BDP5506/F7
BDP5506/F8

EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips
Customer Care Center at 1-866-309-0866
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0866
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00

•

ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0866
• Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo
Para México.

•

Lea este manual antes de usar el product.

E5WA0UD_EN_v3.book

1.

Page 2 Thursday, March 24, 2011

1:43 PM

INTRODUCTION

1.1. Safety Instructions

Return your Product Registration Card or register online at
www.philips.com/support today to get the very most from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below,
so don't miss out. Complete and return your Product Registration Card at once, or register online at
www.philips.com/support to ensure:

*Product Safety Notification *Additional Benefits
By registering your product, you'll receive notification Registering your product guarantees that you’ll
- directly from the manufacturer - in the rare case of receive all of the privileges to which you're entitled,
including special money-saving offers.
a product recall or safety defect.

Know these

safety symbols
Congratulations on your purchase,
and welcome to the “family!”
Dear Philips product owner:
Thank you for your confidence in Philips.
You’ve selected one of the best-built, bestbacked products available today. We’ll do
everything in our power to keep you happy
with your purchase for many years to come.
As a member of the Philips “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding
service networks in the industry. What’s more,
your purchase guarantees you’ll receive all the
information and special offers for which you
qualify, plus easy access to accessories from
our convenient home shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a Philips product.

P.S. To get the most from your
Philips purchase, be sure to
complete and return your Product
Registration Card at once, or register
online at:
www.philips.com/support

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For
the safety of everyone in your household, please do
not remove product covering.
The “exclamation point” calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.
WARNING: To reduce the risk of fire or electric
shock, this apparatus should not be exposed to rain or
moisture, and objects filled with liquids, such as vases,
should not be placed on this apparatus.
CAUTION:To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire
la lame la plus large de la fiche dans la borne correspondante
de correspondante de la prise et pousser jusqu’au fond.
The symbol for CLASS ll (Double Insulation)
The important note and rating are located on the
rear or bottom of the cabinet.

For Customer Use
Please write the model and serial number of your unit
(located on the cabinet) in the space below for future
reference.
Model No. __________________________________
Serial No. __________________________________

Visit our World Wide Web Site at http://www.philips.com/support
EN - 2

Page 3 Thursday, March 24, 2011

1:43 PM

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized
change or modification is made.
This transmitter must be co-located or operated in
conjunction with any other antenna or transmitter.

RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Disconnect the mains plug to shut off when find
trouble or not in use. The mains plug shall remain
readily operable.
CAUTION:

Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type.

WARNING:

Batteries (Battery pack or battery
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.

LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service
person should remove the cover or attempt to service
this apparatus, due to possible eye injury.
CAUTION:

Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.

EN - 3

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 4 Thursday, March 24, 2011

1:43 PM

IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.

Notice for Progressive Scan Output
•

This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Do not place the unit on the furniture that is capable of
being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
even death.

Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture. In
case of picture problems with 525(480) progressive
scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with
this 525p(480p) Blu-ray Disc™/DVD player, please
contact our customer service center.
ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency
and the U.S. Department of Energy
helping us all save money and protect the
environment through energy efficient
products and practices.

This apparatus should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided. Make sure to leave a space of 3.9
inches (10cm) or more around this apparatus.
To Avoid the Hazards of Electrical Shock and Fire
•

Do not handle the AC power cord with wet hands.

•

Do not pull on the AC power cord when disconnecting
it from an AC outlet. Grasp it by the plug.

•

Do not put your fingers or objects into the unit.

1.2. Maintenance
䡲

Servicing

•

Please refer to relevant topics on
“TROUBLESHOOTING” on page 51 before returning
the product.

•

If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you. For online
reference, please visit our website at
www.philips.com/support

䡲

Cleaning the Cabinet

•

Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.

•

Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.

䡲

Cleaning Discs

•

When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to outside. Do not
wipe in a circular motion.

•

Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.

Location and Handling
•

Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or strong
vibration.

•

Avoid a place with drastic temperature changes.

•

Install the unit in a horizontal and stable position. Do
not place anything directly on top or bottom of the
unit. Depending on your external devices, noise or
disturbance in the picture and/or sound may be
generated if the unit is placed too close to them. In this
case, please ensure enough space between the external
devices and the unit.

•

Depending on the environment, the temperature of this
unit may increase slightly. This is not a malfunction.

•

Be sure to remove the disc and unplug the AC power
cord from the outlet before carrying the unit.

Dew Condensation Warning
•

Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at least
for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.

EN - 4

Page 5 Thursday, March 24, 2011

1:43 PM

䡲

Cleaning the Disc Lens

•

If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this user manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.

䡲

Disc Handling

•

Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it is
not used.

•

Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage
the unit.

䡲

Testing the Remote Control

•

If the remote control is not working properly, you can
use a digital camera (including a cellular phone with
built-in camera) to see if it is sending out an infrared
signal.

How to perform the test?
1. Point the IR transmitter of the
remote control towards the lens of
the digital camera (or cell phone
camera).
2. Turn on the digital camera and
look at the IR transmitter of the
remote control through the LCD
display of the digital camera.
3. While looking at the LCD, press
the buttons on your remote
control you want to test.

1.3. Notice
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners. P&F USA
reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the
intended use of the system. If the product, or its individual
modules or procedures, are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents.
No further warranty is expressed or implied. P&F USA
cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result
of the content in this document. Errors reported to P&F
USA will be adapted and published on the P&F USA support
website as soon as possible.
䡲

Warranty

No components are user serviceable. Do not open or
remove covers to the inside of the product. Repairs may
only be done by Service Centers and official repair shops.
Failure to do so shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any
adjustments, or assembly procedures not recommended or
authorized in this manual shall void the warranty.

1.4. Important
Registering your model with Philips makes you eligible for
all of the valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at
once, or register online at www.philips.com/support to
ensure :

a. If your remote control is
working properly, the IR
transmitter of the remote
control will create a noticeable
flash on the LCD of the digital
camera.

Product Safety Notification

b. If it does not flash, replace the
batteries in your remote with
new batteries and try again. If it
still does not flash, your
remote control may be
damaged or defective. Please
contact customer service for
replacement options.

Registering your product guarantees that you receive all of
the privileges to which you’re entitled, including special
money-saving offers.

By registering your product you receive notification
- directly from the manufacturer - in the rare case of a
product recall or safety defect.
Additional Benefits of Product Ownership

For further assistance
For further assistance, call the customer support service in
your country.
•

To obtain assistance in the U.S.A., Canada, Puerto Rico,
or the U.S. Virgin Islands, contact Philips Customer
Care Center at 1-866-309-0866

EN - 5

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

䡲

Page 6 Thursday, March 24, 2011

1:43 PM

Environmental Care

1.6. Trademark Information

The packaging of this product is
intended to be recycled.
Contact your local authorities
for information about how to
recycle the packaging.
For Product recycling
information, please visit www.recycle.philips.com
End of life directives
Philips pays a lot of attention to
produce environment-friendly
products in green focal areas.
Your new Blu-ray Disc™ Player
contains materials which can be
recycled and reused. At the end
of its life, specialized companies
can dismantle the discarded
Blu-ray Disc™ Player to
concentrate the reusable
materials and to minimize the
amount of materials to be
disposed of. Please ensure you
dispose of your old Blu-ray
Disc™ Player according to local
regulations.

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

Manufactured under license under U.S. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS logos are
trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.

Disposal of used batteries
The batteries supplied do not contain the heavy metals
mercury and cadmium. Nevertheless, in many areas
batteries may not be disposed of with your household
waste. Please ensure you dispose of batteries according to
local regulations.

1.5. Supplied Accessories
•

Remote Control

•

Batteries (AAA, 1.5V x 2)

•

User Manual

•

Quick Start Guide

•

Registration card

•

Box-inserts

•

Audio / video cables

HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.

“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.

Java and all Java based trademarks and logos are
trademarks or registered trademarks of Oracle and/or its
affiliates.

EN - 6

Page 7 Thursday, March 24, 2011

1:43 PM

EN

E5WA0UD_EN_v3.book

Windows Media and the Windows logo are trademarks
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.

“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.

Pandora is a registered trademark of Pandora Media, Inc.

“Blu-ray 3D™” and “Blu-ray 3D™” logo are trademarks
of the Blu-ray Disc Association.

“BONUSVIEW™” and “BONUSVIEW™” logo are
trademarks of the Blu-ray Disc Association.

“BD-Live™” and “BD-Live™” logo are trademarks of the
Blu-ray Disc Association.

“Blu-ray Disc™”, “Blu-ray™” and “Blu-ray Disc™” logo
are trademarks of the Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.

Netflix and the Netflix logo are trademarks or registered
trademarks of Netflix, Inc.
Kodak and KODAK Picture CD Compatible are
trademarks of Kodak used under license.
Film Fresh and the Film Fresh logo are registered
trademarks of Film Fresh Inc.

BLOCKBUSTER name, design and related marks are
trademarks of Blockbuster Inc.

The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.

VUDU™ is a trademark of VUDU, Inc.

EN - 7

E5WA0UD_EN_v3.book

Page 8 Thursday, March 24, 2011

1:43 PM

CONTENTS

SPECIAL PLAYBACK................................................... 30

INTRODUCTION.......................................................... 2
Safety Instructions.............................................................
Maintenance .......................................................................
Notice..................................................................................
Important ............................................................................
Supplied Accessories........................................................
Trademark Information ...................................................

2
4
5
5
6
6

FEATURES ........................................................................ 9
Features............................................................................... 9
Version Info...................................................................... 10
Symbols Used in this User Manual.............................. 10

FUNCTIONAL OVERVIEW...................................... 11
Front Panel .......................................................................
Rear Panel.........................................................................
Remote Control..............................................................
Display Panel ....................................................................
Guide to On-Screen Display ........................................

Fast Forward / Fast Reverse ........................................
Slow Forward Playback .................................................
Step by Step Playback ....................................................
Repeat Playback ..............................................................
Slide Show ........................................................................
PiP (BONUSVIEW™) Setting......................................
Enjoying BD-Live™ Discs Using the Internet ..........
Title / Chapter Search ...................................................
Track Search....................................................................
Time Search .....................................................................
Switching Subtitles..........................................................
Switching Audio Soundtrack ........................................
Switching Camera Angles .............................................
Black Level........................................................................
Noise Reduction .............................................................
Virtual Surround .............................................................
Philips Wireless MediaConnect ..................................

30
30
30
30
31
31
31
32
33
33
33
34
34
35
35
35
36

11
11
12
14
14

NETWORK SERVICES................................................ 37

CONNECTIONS ......................................................... 15

PANDORA OPERATIONS........................................ 37

HDMI Video / Audio Connection...............................
Standard Video + Standard Audio Connection .......
Connection to an Audio System .................................
Connection to the Network........................................

15
15
16
20

BEFORE YOU START ................................................ 22
Finding the Viewing Channel / Source on
Your TV ............................................................................ 22
Initial Setup ....................................................................... 22

INFORMATION ON PLAYBACK........................... 23
Information on Playback................................................ 23
Guide to File List............................................................. 25
How to Insert a Disc ..................................................... 26

BASIC PLAYBACK ...................................................... 26
Playing Back a Disc .........................................................
Playing Back a Blu-ray 3D™ Disc................................
Playing Back Contents on a USB Storage Device....
Using the Title / Disc / Pop-up Menu.........................

26
28
29
29

Before Using Network Services.................................. 37
Information on Network Services.............................. 37

Activating Pandora .........................................................
Adding Pandora User Accounts..................................
Creating a New Station.................................................
Guide to the Player Screen ..........................................

37
37
38
38

LIST OF SETTINGS...................................................... 39
SETUPS............................................................................ 42
TV Display ........................................................................
HDMI Video.....................................................................
Network Installation......................................................
EasyLink Setup.................................................................
Parental Control .............................................................
Software Update.............................................................
Restore Default Settings ...............................................

42
42
43
48
48
49
50

TROUBLESHOOTING ............................................... 51
Downloading an Electronic Copy ............................... 54
Contact Us....................................................................... 54

GLOSSARY .................................................................... 55
LANGUAGE CODE LIST........................................... 58
SPECIFICATIONS ........................................................ 59
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D TELEVISIONS............... 60
ONE (1) YEAR LIMITED WARRANTY.................. 61
LICENSE......................................................... end of book

EN - 8

2.

Page 9 Thursday, March 24, 2011

1:43 PM

FEATURES

Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register
your product at www.philips.com/support

2.1. Features
Blu-ray Disc™
You can enjoy Blu-ray Disc™ which is capable of storing
five times more data than a conventional DVD.
Playing back Blu-ray 3D™ Disc
This unit can play back Blu-ray 3D™ discs which contain
stereoscopic 3D video. In order to enjoy 3D video,
connect this unit to a 3D capable TV using a 3D compatible
HDMI cable.

Easy and simple connection to your HDTV via
HDMI
Connect your BDP5506 to your HDTV with one single
HDMI (High-Definition Multimedia Interface) cable. Philips
recommends High Speed HDMI cable for better
compatibility. The high definition video output signal will be
transferred to your HDTV without conversion to analog
signals, so you will get excellent picture and sound quality,
completely free from noise. Thanks to other multiple
outputs, you can also easily connect to your home theater
system or amplifier.
About EasyLink (HDMI CEC) (Consumer
Electronics Control)
EasyLink allows you to operate the linked functions of this
player with Philips brand TV with EasyLink feature.
Philips does not guarantee 100 % interoperability with other brands
of HDMI CEC compliant devices.

PiP (BONUSVIEW™)
BD-Java
With some Blu-ray™ discs which contain Java applications,
you can enjoy interactive functions such as games or
interactive menus.
DVD upscaling for enhanced picture quality
Your current DVD will look even better than before thanks
to video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p
over an HDMI connection. The picture will be less jagged
and more realistic for a near high definition experience.

Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing
[BONUSVIEW (PiP)] whenever the scene contains a
secondary video.
BD-Live™
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows
interactive functions to be used when this unit is connected
to the Internet in addition to the BONUSVIEW™ function.
The various functions differ depending on the disc.

Enjoy your content on different kinds of media

Pop-up menu

Full backwards compatibility with DVD, CD and USB
storage device ensures that you can continue to enjoy your
current audio-video collection. Additionally, you can enjoy
AVCHD / MP3 / WMA / JPEG files.

Some BD-videos have a pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting playback. You can call up the pop-up
menu by pressing [DISC MENU / POP-UP MENU].
Contents in the pop-up menu vary depending on the disc.

Listen to rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Intuitive user interface and remote control
The Philips logical user interface allows you to easily
navigate through your content and settings, so you can
quickly find what you are looking for.

HDMI Deep Color
Deep Color reduces posterization (color banding) effect of
the playback image. Refer to “HDMI Deep Color” on page 39.
HDMI 1080p/24 output (Blu-ray Disc™ only)
This unit is equipped with the feature which can provide
smooth movement during playback of film originated
material with the frame rate of 24 frames per second with
progressive. (Available only when the display device is
connected by an HDMI cable.) Refer to “HDMI Video” on
page 42.

EN - 9

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 10

Thursday, March 24, 2011

1:43 PM

Playing back contents on a USB storage device
You can play back MP3 / WMA / JPEG files stored in a USB
storage device. BD-ROM Profile 2.0 (BD-Live™) and
Profile 1.1 discs sometimes store picture-in-picture
commentary, subtitles or other extras in the USB storage
device for use during playback with the BD-video.
Playing back AVCHD files

2.2. Version Info
“Version Info” screen provides information about this unit’s
software version.
You can also download the latest software from the Philips
website and update it yourself if it is newer than the version
currently on your unit. The current version of software on
your unit can be seen on the “Version Info” screen.

This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
disc. Your high definition personal archive is playable in HD
quality.

To access “Version Info”, follow the procedure below.

x.v.Color

3. Use [K / L] to select “Advanced Setup”, then press
[OK].

This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color” space, a TV or other display
device supporting both video image reproduction using
“x.v.Color” standard and capability of manual switching of
its color space setting is required. Please refer to the user
manual of your display device for further information.
Netflix
With this unit, you can enjoy movies and TV episodes
streamed instantly from Netflix via the Internet. In order to
use this feature, you must visit netflix.com/Philips on your
PC and become a Netflix member.
(This feature is available only in the United States.)

1. Press [

(home)].

2. Use [K / L / s / B] to select “Setup”, then press
[OK].

4. Use [K / L] to select “Version Info”, then press [OK].

2.3. Symbols Used in this User Manual
To specify which media type each function is applicable to,
we put the following symbols at the beginning of each item
to operate.
Symbol

Description
Description refers to BD-video
Description refers to DVD-video

Film Fresh / Blockbuster

Description refers to audio CD / DTS-CD

With this unit, you can enjoy movies and TV episodes
streamed instantly from Film Fresh / Blockbuster via the
Internet. In order to use this feature, you must visit
following website on your PC and become a Film Fresh /
Blockbuster member. (This feature is available only in the
United States.)

Description refers to DVD-RW/-R with
AVCHD files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with MP3
files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with
Windows Media™ Audio files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with JPEG
files

- Film Fresh : filmfresh.roxionow.com/Login
- Blockbuster : www.blockbuster.com/auth/login
VUDU
This unit supports VUDU which is the leading HD ondemand video service. With VUDU, you can also enjoy
various kinds of Internet applications. In order to use this
feature, you must connect this unit to the Internet.
For complete instructions on using VUDU service, please
visit www.vudu.com/docs to view an updated in-depth
online manual.
(This feature is available only in the United States.)
Pandora
This unit supports Pandora Internet radio service. You can
instantly listen to personalized radio stations streamed over
the Internet from Pandora.
(This feature is available only in the United States.)
EN - 10

If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.

3.

Page 11

Thursday, March 24, 2011

1:43 PM

FUNCTIONAL OVERVIEW

3.2. Rear Panel
1 2

3.1. Front Panel
1

2 3 4

5

6

7

8

3

4

65

1. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.

1. Q (standby/on) button
• Touch to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)

2. LAN terminal

• Touch and hold for 10 seconds to shut down the
unit.

3. DIGITAL OUT (COAXIAL) jack

• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
• Use to connect an AV receiver / amplifier,
Dolby Digital / DTS decoder or to another device
with a digital audio coaxial input jack with a digital
audio coaxial cable.

2. B (play) button
• Touch to start or resume playback.
3. C (stop) button
• Touch to stop playback.

4. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.

4. A (open/close) button
• Touch to open or close the disc tray.

• Unplug this cord from the AC outlet to completely
turn off the unit.

5. Disc tray
• Place a disc after opening the disc tray.
6. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
7. Display panel

5. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with a video cable.
6. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with an audio cable.

• Refer to “Display Panel” on page 14.
8. USB input
• Connect a USB storage device or USB card reader.
C Caution
•

•

Do not connect any device other than USB storage
device or USB card reader into USB input. (e.g. PC,
external HDD, MP3 player, digital camera, keyboard,
mouse, etc.)

C Caution
•

Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.

•

This unit does not have an RF modulator.

Do not use an extension cord or USB hub to connect
devices to this unit. Always connect one single USB
storage device or USB card reader into USB input
directly.

D Note
•

Due to new ENERGY STAR® requirements, this unit
will automatically enter standby mode after 25 minutes
of inactivity.

EN - 11

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 12

Thursday, March 24, 2011

1:43 PM

6. DISC MENU / POP-UP MENU button

3.3. Remote Control

Blu-ray Disc™:
• Press to display the pop-up menu.

1
2
3
4
5
6

DVD:
29
28

• Press to display the disc menu.
7. K / L / s / B buttons
• Press to select items or settings.

27

7

8. OK button
• Press to confirm or select menu items.
9. BACK U button

8

• Press to return to the previously displayed menu or
screen function.

9
10*
11

26
25
24

10. B (play) button*

12
13

23
22

11. S (previous) button

14

21

15*

• During playback, press once to return to the
beginning of the current title, chapter, track or file.
• During playback, press twice to return to the
previous title, chapter, track or file.

16
17
18

• Press to start playback or resume playback.

20
19

• During the JPEG playback, press to return to the
previous file.
12. E (reverse) button
• During playback, press to fast reverse the playback.
13. C (stop) button
• Press to stop playback.
14. TV VOL ⴐ / ⴑ button

* The unit can also be turned on by pressing these
buttons.
1. Q (standby/on) button
• Press to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2. BONUSVIEW (PiP) button
• Press to switch picture in picture feature on/off (only
applicable to BD-video which supports the PiP
(BONUSVIEW™) function).
3. OPTION button
• During playback, press to display the play menu.
4. Red / Green / Blue / Yellow buttons
• Press to activate shortcut keys on some BD-video
functions.
• When file list is shown, press to switch between
pages.
5.

(home) button
• Press to display the home menu.

EN - 12

• Press to adjust the TV volume (only applicable to the
Philips brand TV).
15. A (open/close) button*
• Press to open or close the disc tray.
16. Number buttons
• Press to select a chapter during playback.
• Press to enter numbers and letters in the input field.
17. SUBTITLE button
• Press to select subtitles on a disc.
18. ANGLE button
• Press to select camera angles on a disc.
19. HDMI button
• Press to set the HDMI output mode.
20. AUDIO button
• Press to select the audio channel (such as audio
languages) on a disc.

Page 13

Thursday, March 24, 2011

1:43 PM

21. TV CH ⴐ / ⴑ button
• Press to change the channel up and down (only
applicable to the Philips brand TV).
22. d (mute) button

C Caution
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
•

Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.

•

Do not mix new and old batteries together.

•

Do not use different kinds of batteries together.
Although they may look similar, different batteries may
have different voltages.

•

Make sure that the + and - ends of each battery match
the indications in the battery compartment.

• During playback, press to skip to the next chapter,
track or file.

•

Remove batteries from battery compartment, when the
remote is not going to be used for a month or more.

• When playback is in pause mode, press to forward
the playback picture by picture.

•

When disposing of used batteries, please comply with
governmental regulations or environmental public rules
that apply in your country or area.

•

Do not recharge, short-circuit, heat, burn or
disassemble batteries.

䡲

Using the Remote Control

• Press to mute the TV volume (only applicable to the
Philips brand TV).
23. D (forward) button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the
playback.
24. T (next) button

25. F (pause) button
• Press to pause playback.
26. Net-TV button
• Press to display the network media mode menu.
27. TOP MENU button
Blu-ray Disc™:

Remote Control Usage Guidelines:
•

Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.

•

Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.

•

Remote controls of different devices can interfere with
each other. Avoid using a remote control from another
device which is located close to the unit.

•

Replace the batteries when you notice a fall-off in the
operating range of the remote control.

•

The maximum operable ranges from the unit are as
follows.

• Press to display the top menu.
DVD:
• Press to display the title menu.
28. INFO button
• Press to display the information display.
29. REPEAT button
• Press to select repeat mode.
䡲

Installing the Batteries in the Remote Control

Install 2 AAA (1.5V) batteries matching the polarity
indicated inside battery compartment of the remote
control.

- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
- Above:
approx. 16 feet (5 m) within 15°
- Below:
approx. 10 feet (3 m) within 30°

30˚

30˚

16 feet (5 m) 23 feet (7 m)

16 feet (5 m)

EN - 13

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 14

Thursday, March 24, 2011

1:43 PM

䡲

3.4. Display Panel
Display panel shows playback status or information (e.g.
elapsed playing time, repeat type, menu type, etc. ).

Setup Menu

1

Video Setup

3D Output

Auto (3D)

TV Display

16:9 Widescreen

HDMI Video

Auto

HDMI Deep Color

Auto

De-interlacing Mode

Auto

2

Audio Setup
Network Setup
EasyLink Setup

Preference Setup

* Brightness of the display can be adjusted. Refer to
“Display Panel” in “LIST OF SETTINGS” on page 41.

Advanced Setup

1. Category

e.g.)
Indicating the elapsed time of
playback.
Current chapter is in chapter
repeat mode during playback of
disc.
Loading a disc, USB storage device
or USB card reader.
Home menu is displayed.

2. Menus / Options :
Displays options for the highlighted item on the left
whenever available
䡲

Play Menu

During playback, press [OPTION] to display the play
menu.
e.g.) Blu-ray Disc™

Network media mode menu is
displayed.
Search
Audio

3.5. Guide to On-Screen Display

Subtitle
Repeat
Black Level

䡲

Home Menu

Noise Reduction

When you turn on the unit, home menu will appear
automatically. Otherwise, press [ (home)].

“Play Disc”

Play Disc

Browse USB

MediaConnect

Setup

Browse Net TV

: Initiates playback of inserted disc,
displays a list of tracks / files or the
media filter menu
“Browse USB”
: Displays a list of tracks / files on
the connected USB storage device
or the media filter menu
“Browse Net TV” : To access the menu of network
services
“MediaConnect” : To access the Philips Wireless
MediaConnect menu
“Setup”
: To access setup menu

EN - 14

E5WA0UD_EN_v3.book

Thursday, March 24, 2011

1:43 PM

CONNECTIONS
EN

4.

Page 15

4.1. HDMI Video / Audio Connection
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)
Your TV

HDMI cable
(not supplied)

HDMI IN

HDMI OUT

No analog audio connection required.
(*1) 1080i : Outputs video data with a frame rate of 30 frames per second.
(*2) 1080p : Outputs video data with a frame rate of 60 frames per second.
•

Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector
are matched.

•

When connected to an HDCP incompatible display device, the picture will not be displayed properly.

•

Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also
known as HDMI category 2 cable) is recommended for better compatibility.

•

To enjoy Blu-ray 3D™ video, connect this unit to a 3D capable TV using a 3D compatible HDMI cable.

4.2. Standard Video + Standard Audio Connection
(Supports only 480i resolution.)
Your TV

L
L

Video cable (supplied)

VIDEO IN

AUDIO IN

R

R
AUDIO
OUT

VIDEO
OUT

Audio cable (supplied)

•

Connect this unit directly to the TV. If the audio / video cables are connected to a VCR then the pictures may be
distorted due to the copyright protection system.

EN - 15

E5WA0UD_EN_v3.book

Page 16

Thursday, March 24, 2011

1:43 PM

4.3. Connection to an Audio System
•

When you change the connections, all devices should be turned off.

•

When making connections with external devices, please refer to their user manuals for additional setup help.

䡲

2-Channel Analog Audio Connection

䡲

Stereo system with
analog audio input jacks

Digital Audio Connection
AV receiver / amplifier with a
digital audio coaxial input jack

AUDIO IN
R

L

DIGITAL AUDIO INPUT
COAXIAL

Audio cable
(supplied)
Digital audio coaxial cable
(not supplied)

L
COAXIAL
DIGITAL OUT
PCM/BITSTREAM

R
AUDIO
OUT

䡲

HDMI Audio Connection

AV receiver / amplifier with an HDMI input jack
HDMI IN

HDMI cable
(not supplied)
HDMI OUT

EN - 16

E5WA0UD_EN_v3.book

Thursday, March 24, 2011

1:43 PM

Audio Output from AUDIO OUT jacks
Media


BD-video

DVD-video
DTS-CD
AVCHD
Audio CD
MP3
Windows Media™ Audio
Netflix
Film Fresh
Blockbuster
VUDU
Pandora

“Blu-ray Disc Audio” setting A
Audio Source

Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS®
DTS-HD®
LPCM
Dolby Digital
DTS®
LPCM
DTS®
Dolby Digital
LPCM
LPCM
MP3
WMA
WMA
AAC
AAC
Dolby Digital Plus
MP3
MP3

*1)

Fully decoded.

*2)

Only the independent substream is decoded.

*3)

Dolby TrueHD stream is decoded.

*4)

Only the Dolby Digital substream is decoded.

*5)

Only the core substream is decoded.

“Primary Audio Only”

“Mix Audio Output”

DownMix 2ch LPCM

DownMix 2ch LPCM

DownMix 2ch LPCM*1
DownMix 2ch LPCM*3
DownMix 2ch LPCM

DownMix 2ch LPCM*2
DownMix 2ch LPCM*4
DownMix 2ch LPCM

DownMix 2ch LPCM*1
DownMix 2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM

DownMix 2ch LPCM*5
DownMix 2ch LPCM

DownMix 2ch LPCM*1
2ch LPCM
2ch LPCM

EN - 17

EN

䡲

Page 17

E5WA0UD_EN_v3.book

䡲

Page 18

Thursday, March 24, 2011

1:43 PM

Audio Output from DIGITAL OUT (COAXIAL) jack

Media


BD-video

“Digital Audio”
“Bitstream”
setting A
“Blu-ray Disc Audio” “Primary Audio
“Mix Audio
setting A
Only”
Output”
Audio Source

Dolby Digital
Dolby Digital

DownMix 2ch LPCM

Dolby Digital Plus

Dolby Digital

DownMix 2ch LPCM*1 DownMix 2ch LPCM*2

Dolby TrueHD

Dolby Digital

DTS®

DTS®

DownMix 2ch LPCM*3 DownMix 2ch LPCM*4
DownMix 2ch LPCM

DTS-HD®

DTS®

LPCM
Dolby Digital
DVD-video
DTS®
LPCM
DTS-CD
DTS®
Dolby Digital
AVCHD
LPCM
Audio CD
LPCM
MP3
MP3
Windows Media™ Audio WMA
Netflix
WMA
Film Fresh
AAC
Blockbuster
AAC
VUDU
Pandora

DownMix 2ch LPCM
Dolby Digital
DTS®
2ch LPCM
DTS®
Dolby Digital
DownMix 2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch AAC
2ch AAC

Dolby Digital Plus

Dolby Digital

MP3
MP3

2ch LPCM
2ch LPCM

*1)

Fully decoded.

*2)

Only the independent substream is decoded.

*3)

Dolby TrueHD stream is decoded.

*4)

Only the Dolby Digital substream is decoded.

*5)

Only the core substream is decoded.

“LPCM”
“Primary Audio Only”

“Mix Audio Output”

DownMix 2ch LPCM*1 DownMix 2ch LPCM*5
DownMix 2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
DownMix 2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
DownMix 2ch LPCM*1
2ch LPCM
2ch LPCM

D Note
•

When playing back a BD-video which only contains the primary audio, the audio output will be the same case as
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.

•

If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the
connected device.

EN - 18

E5WA0UD_EN_v3.book

Thursday, March 24, 2011

1:43 PM

Audio Output from HDMI OUT jack

Media


BD-video

“HDMI Audio”
setting A
“Blu-ray Disc Audio”
setting A
Audio Source

Dolby Digital

“Primary Audio
“Mix Audio
“Primary Audio
“Mix Audio
Regardless
Only”
Output”
Only”
Output”
Which audio format can be output depends on the compatibility of the connected
device.
Dolby Digital
Multi LPCM
Mute

Dolby Digital Plus

Dolby Digital Plus

Dolby Digital

Multi LPCM*1

Multi LPCM*2

Mute

Dolby TrueHD

Dolby TrueHD

Dolby Digital

LPCM*3

Multi LPCM*4

Mute

DTS®

DTS®

Multi
Multi LPCM

DTS-HD®

DTS-HD®

DTS®

Multi LPCM*1
Multi LPCM
Multi LPCM
Multi LPCM
2ch LPCM
Multi LPCM
Multi LPCM
Multi LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM

Multi LPCM*5

Mute

LPCM
Dolby Digital
DVD-video
DTS®
LPCM
DTS-CD
DTS®
Dolby Digital
AVCHD
LPCM
Audio CD
LPCM
MP3
MP3
Windows Media™ Audio WMA
Netflix
WMA
Film Fresh
AAC
Blockbuster
AAC
VUDU
Pandora

“Bitstream”

Multi LPCM
Dolby Digital
DTS®
2ch LPCM
DTS®
Dolby Digital
Multi LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch AAC
2ch AAC

Dolby Digital Plus

Dolby Digital Plus

MP3
MP3

2ch LPCM
2ch LPCM

*1)

Fully decoded.

*2)

Only the independent substream is decoded.

*3)

Dolby TrueHD stream is decoded.

*4)

Only the Dolby Digital substream is decoded.

*5)

Only the core substream is decoded.

“LPCM”

Multi LPCM*1
2ch LPCM
2ch LPCM

“Off”

Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute

D Note
•

If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI
Audio” setting.

•

If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the
connected device.

•

When playing back a BD-video which only contains the primary audio, the audio output will be the same case as
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.

EN - 19

EN

䡲

Page 19

E5WA0UD_EN_v3.book

Page 20

Thursday, March 24, 2011

1:43 PM

4.4. Connection to the Network
By connecting this unit to the Internet, you can update the software via the Internet or access BD-Live™, Netflix, Film
Fresh, Blockbuster, VUDU and Pandora services.
D Note
•

For a stable connection, wired connection is recommended when using following features. (Using following features
with Wi-Fi connection can be affected by other devices using radio frequencies.)
- Video streaming services (Netflix / Film Fresh / Blockbuster / VUDU)
- Listening to Internet radio (Pandora)
- Network update

䡲

Wired Connection
Networking equipment (modem, etc.)

Broadband router or hub

WAN

LAN

LAN
5

4

3

2

1

LAN cable (not supplied)
LAN cable (not supplied)

Internet
LAN

C Caution
•

Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.

•

Do not connect your PC directly to the LAN terminal of this unit.

D Note
•

After you make a wired connection, set up necessary network settings.
(For network setting of wired connection, refer to “Wired” on page 44.)

•

If your modem does not have router functions, connect a wired router.

•

If your modem has router functions but there is no vacant port, add a hub.

•

For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.

•

Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.

EN - 20

E5WA0UD_EN_v3.book

䡲

Page 21

Thursday, March 24, 2011

1:43 PM

Wi-Fi Connection

EN

Networking equipment (modem, etc.)

Internet

LAN

WAN

Wi-Fi router
LAN cable (not supplied)

D Note
•

After you made the Wi-Fi connection, set up necessary network settings.
(For the network setting of Wi-Fi connection, refer to “Wireless” on page 46.)

•

For a Wi-Fi router, use a router which supports IEEE 802.11 b/g/n.
(“n” type is recommended for stable operation of the Wi-Fi network.)

•

Set the Wi-Fi router to Infrastructure mode. This unit does not support Ad-hoc mode.

•

Other radio devices or obstacles may cause interference to the Wi-Fi network connection.

EN - 21

E5WA0UD_EN_v3.book

5.

Page 22

Thursday, March 24, 2011

1:43 PM

BEFORE YOU START

5.1. Finding the Viewing Channel /
Source on Your TV
After you have completed all the connections, you must
find the viewing channel (external input source) on your
TV.

5.2. Initial Setup
Please follow the instructions below to complete the initial
setup.
1. While welcome screen is displayed, use [K / L] to
select “Next”, then press [OK].
2. Language setup screen will appear. Use [K / L] to
select your language, then press [OK].

1. After you have made all the necessary connections,
press [Q (standby/on)] to turn on the unit.

Please select your
language for on-screen
display.

2. Turn on your TV.

English
Español
Français

3. Press the button on the TV’s remote control that
accesses the external input channel. It may be labeled
“SOURCE”, “AV”, “AUX” or “SELECT” (refer to your
TV’s user manual). Or press “2” on the TV’s remote
control, then press channel down button repeatedly
until you see the Philips splash screen.

3. Quick start mode setup screen will appear. Use
[K / L] to select the desired mode, then press [OK].
4.

Auto software update setup screen will appear. Use
[K / L] to select the desired mode, then press [OK].

5. Network setup screen will appear. Use [K / L] to
select the desired mode, then press [OK].
• If you select “Wired”, refer to “Wired” on page 44
for further operation.
This is the correct viewing channel (external input
source).
• If the TV is connected by an HDMI cable, it may take
a while for the Philips splash screen to come up.
• If a certain amount of time has passed since you
turned on the unit, welcome screen appears the first
time you turn on this unit.

EN - 22

• If you select “Wireless”, refer to “Wireless” on page
46 for further operation.

6.

Page 23

Thursday, March 24, 2011

1:43 PM

Playable files

INFORMATION ON
PLAYBACK

AVCHD
MP3
Windows Media™ Audio

6.1. Information on Playback

JPEG

Before you start playing back a disc, read the following
information.
䡲

Playable Discs and Files
Playable discs

Media

Logos

Readable devices

DVD-RW/-R
BD-RE/-R
DVD-RW/-R
CD-RW/-R
USB storage device

Playable files / data

MP3, WMA, JPEG, picture-inUSB storage device supports picture commentary, subtitles or
USB1.1 / USB2.0
other extras for BD-ROM ver. 2
(Profile 2.0 / Profile 1.1)

Blu-ray Disc™
䡲

-

BD-video
Blu-ray 3D™ Disc
Blu-ray 3D™ only Disc
BD-RE* (ver. 2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1 / 1.2 / 1.3)
(Recorded in BDMV format)
(Discs not finalized may not be
played back.)

Recommended Specifications

AVCHD
This unit cannot play back standalone AVCHD files (*.m2ts,
*.mts or *.m2t) written to a DVD. The DVD containing
AVCHD files must have a proper file and folder structure
meeting AVCHD format specifications.
Please use AVCHD compliant device / software to burn or
copy AVCHD files to DVD. (Please refer to user manuals
of the device / software for more information.)

DVD-video

MP3 / Windows Media™ Audio
•
•

DVD-RW
(finalized video mode discs only)

Sampling frequency
Constant bit rate

DVD-R
(finalized video mode discs only)

JPEG

CD-DA (audio CD)

•

Resolution
Upper limit

: 2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to 4:2:2)
Lower limit
: 32 x 32 dots
Maximum file size of : 12MB
a picture

CD-RW
•
•

CD-R

䡲

KODAK Picture CD

Folder / File Number Limitations

Blu-ray Disc™, DVD and USB storage device
•

DTS-CD

: 32 kHz, 44.1 kHz or 48 kHz
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps (WMA)

-

(*) Due to the intentional progression of the Blu-ray Disc™
format by its standard setting authority, the company
cannot guarantee or warrant the playability of future
extensions of the Blu-ray Disc™ format with this
product.

999 folders (groups) and 9,999 files.

CD
•

255 folders (groups) and 999 tracks / files.

EN - 23

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 24

Thursday, March 24, 2011

1:43 PM

Caution / Note for USB Storage Device

䡲

C Caution

The following discs will not be played back in this unit.

•

Philips is not responsible if the USB storage device is
not supported nor is it responsible for damage or loss
of data from the device.

•

Do not try to open or modify the USB storage device.

•

Do not touch the terminal surface with your fingers or
any metals.

•
•
•
•
•
•

CD-ROM
DVD-RAM
DVD-audio
HD DVD
unfinalized disc
BD-RE (ver.1.0)

•

BD-RE (ver.2.1) (Recorded in BDAV format)

•

BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)

•

Blu-ray Disc™ that contains AVCHD files

D Note

Unplayable Discs and Files

•
•
•
•

CD-I (compact disc-interactive)
VSD (video single disc)
video CD
SVCD

•

This unit supports USB storage device with FAT16 /
FAT32 file system.

•

This unit does not support NTFS file system.

•

•

This unit may not read USB storage devices formatted
on a computer. If that is the case, please reformat the
USB storage devices in this unit and try again.

Blu-ray Disc™ / DVD / CD / USB storage device / SD
card contains DivX® files

•

Blu-ray Disc™ / DVD hybrid disc (played back as a BDvideo only)

•

Please keep the USB storage devices in their cases
when you are not using them.

•

DVD-RW/-R recorded in non compatible recording
format

•

Some USB storage devices may not work with this unit.

•

•

This unit can read SD cards using USB card reader (not
supplied).

Super Audio CD - Only the sound on the CD layer can
be heard. The sound on the high-density Super Audio
CD layer cannot be heard.

•

Playability of dual discs is not guaranteed.

•

This unit cannot play back the disc contents protected
by Windows Media™ Digital Rights Management
(DRM).

䡲

Region Codes

Readable cards:
SD Memory Card (8 MB - 2 GB)
miniSD Card (16 MB - 2 GB)
microSD Card (256 MB - 2 GB)
SDHC Memory Card (4 GB - 32 GB)
miniSDHC Card (4 GB - 8 GB)
microSDHC Card (4 GB - 16 GB)

EN - 24

This unit has been designed to play back
BD-video with region “A”, DVD-video
with region “ALL” or “1” for BDP5506/F7
(USA / Canada) and region “ALL” or “4”
for BDP5506/F8 (Mexico). You cannot
play back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.

BD-video

DVD-video

For BDP5506/F7
(USA / Canada)

For BDP5506/F8
(Mexico)

䡲

Page 25

Thursday, March 24, 2011

1:43 PM

Hint for Disc Playback

The contents of a disc are generally divided into sections or
folders (groups of titles / files) as shown below.
title 2
chapter 2

chapter 1

䡲

Music File List

e.g.) MP3 mode

BD-video, DVD-video, AVCHD
title 1
chapter 1
chapter 2

6.2. Guide to File List
EN

E5WA0UD_EN_v3.book

2

chapter 3

1
7

File List
Track 1 / 25

3

Time 0 : 00 : 12

MP3_ Disc

CD

4

DATA

Audio
MP3_1.mp3

Audio CD
track 1

track 2

track 3

MP3_2.mp3

track 4

track 5

6

5

MP3_3.mp3
MP3_4.mp3
MP3_5.mp3
MP3_6.mp3
Page Up

MP3,Windows Media™ Audio, JPEG
folder (group) 1
file 1
file 2

file 3

folder (group) 2
file 4

file 5

1. Current track (file) number / Total number of
tracks (files)
2. Elapsed playing time of the current track
3. Playback status
4. Media type
5. Image

䡲

Description for Icons

[

] : group (folder) icon

[

] : music file icon

- “Folders” refers to the groups of files.
- “Tracks” refers to the contents recorded on the audio
CD.
- “Files” refers to the contents on a disc which are
recorded in AVCHD, MP3, Windows Media™ Audio,
JPEG (including KODAK Picture CD) file format.
D Note
•

6. Group (folder) / File list
7. Name of disc / USB storage device
䡲

Picture File List

1

2

Thumbnail
Track
1/50
Pictures

5

Unrecognizable characters will be replaced with
asterisks.

Picture CD

Photo Folder

Page Up

3
4

Page Down

1. Current file number / Total number of files
2. Playback status
3. Media type
4. Image
5. Group (folder) / File list (thumbnails)

EN - 25

E5WA0UD_EN_v3.book

Page 26

Thursday, March 24, 2011

1:43 PM

How to Navigate through the Track / File List

7.

BASIC PLAYBACK

•

Use [K / L] to move the highlight up and down in the
list.

•

To access the files in a group (folder), select the
desired group (folder), then press [OK].

7.1. Playing Back a Disc

•

Press [s] or [BACK U] to go back to the
previous hierarchy.

1. Insert a disc (refer to “How to Insert a Disc” on page
26).

•

Press [Red] or [Green] to change the page of the
list.

•

Press [Yellow] to go back to the media mode
screen.

•

Press [

(home)] to go back to the home menu.

• For Blu-ray Disc™ / DVD / audio CD or a disc
containing only one type of file, playback will start
automatically. If not, press [B (play)].
• Some discs may show a title or a disc menu. In this
case, refer to “Using the Title / Disc / Pop-up Menu”
on page 29.
• Media filter screen will appear.

6.3. How to Insert a Disc

2. Select the type of the file you want to play back, then
press [OK].

1. Press [A (open/close)] to open the disc tray.
2. Place the disc on the disc tray with its label side facing
up.

Music

Photo

AVCHD

Align the disc to the
disc tray guide.

3. Press [A (open/close)] to close the disc tray.
• It may take a while to load the disc.

3. For “AVCHD”, playback will start automatically.
For “Music”, track / file list will be displayed. Select a
group (folder) or track / file you want to play back then
press [B (play)] or [OK] to start playback.
• Refer to “Music File List” on page 25 and “How to
Navigate through the Track / File List” on page 26.
For “Photo”, thumbnail screen will appear.
• Refer to “Picture File List” on page 25 and “How to
Navigate through the Track / File List” on page 26.

EN - 26

Page 27

Thursday, March 24, 2011

1:43 PM

To skip to the next track / file :

D Note

Press [T (next)].

•

Playback will also stop and the home menu will appear
when you press [ (home)].

•

For BD-Java application, the Resume-On-Stop may not
be available.

•

If you press [OK] instead of [B (play)], playback can
be started from the beginning of the disc even if it was
in the Resume-On-Stop mode.

•

Resume-On-Stop mode remains in effect even after
power is turned off, but will be canceled once the disc
is ejected.

•

With regard to the multi-border BD-RE/-R, additionally
recorded sections cannot be recognized.

Playback will be in Resume-On-Stop mode.

•

With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be recognized.

䡲

Resume-On-Stop Mode

E Tips for JPEG / KODAK Picture CD Playback

Blu-ray Disc™ / DVD / AVCHD :

•

When you press [B (play)] next time, the playback
will start from the point where it has been stopped.

Every press of [s / B] will turn the image by 90
degrees when an image is displayed.

•

Audio CD :

During playback, press [TOP MENU] to display
thumbnail screen.

•

Playback will start from the point where it is stopped
next time you press [B (play)]. If you press [OK]
instead of [B (play)], playback will start from the
beginning of the track / file instead of resuming from the
stop point.

This unit conforms to ver.7.0 of KODAK Picture CD.
For details of KODAK Picture CD, contact a shop that
provides developing service for Kodak Inc.

•

Some unplayable folders or files may be listed due to
the recording status.

•

High-resolution JPEG files take longer to be displayed.

MP3 / WMA / JPEG / KODAK Picture CD :

•

Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.

To skip to the previous track / file :
Press [S (previous)].
To pause playback :
Press [F (pause)].
To return to normal playback :
Press [B (play)].
To stop playback :
Press [C (stop)].

Playback will start from the beginning of the current file
next time you press [B (play)] or [OK].

EN - 27

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 28

Thursday, March 24, 2011

1:43 PM

7.2. Playing Back a Blu-ray 3D™ Disc

This unit can play back Blu-ray 3D™ discs which contain
stereoscopic 3D video. In order to view Blu-ray 3D™
videos, you need to have the following:
- 3D capable TV
- 3D compatible HDMI cable
- 3D glasses
- Blu-ray 3D™ Disc or Blu-ray 3D™ only Disc
1. Connect 3D capable TV with a 3D compatible HDMI
cable.
• Refer to “HDMI Video / Audio Connection” on page 15.
2. Insert a Blu-ray 3D™ Disc or a Blu-ray 3D™ only Disc.
• Refer to “How to Insert a Disc” on page 26.
3. Playback may start automatically. If not, press
[B (play)].
Some discs may show a title or a disc menu. In this case,
refer to “Using the Title / Disc / Pop-up Menu” on page
29.
To pause playback:
Press [F (pause)].

C Caution
•

Watching 3D videos may cause headache, dizziness or
tiredness.
To avoid such consequences, do not watch 3D videos
for a long period of time.

•

Watching 3D videos is not recommended for the
following people:
- People who are susceptible to motion sickness
- Children from walking age to seven years
- Pregnant woman

For more information, refer to “IMPORTANT HEALTH
AND SAFETY INFORMATION FOR 3D TELEVISIONS”
on page 60.
D Note
•

For more information, refer to the 3D TV’s manual.

•

When “3D Output” is set to “Auto (XX)” and your TV is
not 3D capable, playback of Blu-ray 3D™ discs will
revert to 2D depending on the disc.

•

You can turn off 3D output mode by setting “3D
Output” to “2D”. (Refer to page 39.)

•

For some Blu-ray 3D™ only discs, playback in 2D mode
is not possible.

•

You can check the current output mode (2D or 3D) by
pressing [INFO] during playback.

•

If you change “3D Output” setting to “2D” while the
unit is in the Resume-On-Stop mode of Blu-ray 3D™
Disc playback, the resume information will be cleared.

To return to normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode, and the
home menu will appear.
䡲

Resume-On-Stop mode
When you press [B (play)] next time, the playback
will start from the point where it has been stopped.

EN - 28

Page 29

Thursday, March 24, 2011

1:43 PM

7.3. Playing Back Contents on a USB
Storage Device

You can play back MP3 / WMA / JPEG files from a USB
storage device. With the USB storage device, you can also
enjoy the following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1.
(For more information about the special additional
contents, refer to the instruction book that came with
the disc.)
- BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For
more information about BD-Live™, refer to page 31.)

D Note
•

•

•

•

The resume information will be cleared when;
- [C (stop)] is pressed while in the Resume-On-Stop
mode.
- the USB storage device is removed.
- the unit is switched to standby mode.
Do not delete the folders or files in the USB storage
device with your computer. This unit may not read USB
storage devices formatted on a computer.
If a folder or file name includes one of the following
unrecognizable characters, the folder or file name may
not be displayed correctly.
- Unrecognizable characters : . , " = + [ ] ; / \ : | ¥
This unit can read MP3 / WMA / JPEG files in an SD
card by using USB card reader (not supplied).

7.4. Using the Title / Disc / Pop-up Menu

1. Connect a USB storage device to the USB input.
2. Press [

(home)].

3. Use [K / L / s / B] to select “Browse USB”, then
press [OK].
4. Follow steps 2 to 3 in “Playing Back a Disc” on page 26.
To remove the USB storage device:
In stop mode, pull it out slowly.

Some BD-videos, DVD-videos or AVCHD files may contain
a title menu which describes the contents of the disc, or a
disc menu which guides you through the available functions
in the disc.
With such discs, a title menu or a disc menu may appear
automatically when you insert the disc. Otherwise, press
[TOP MENU] or [DISC MENU / POP-UP MENU]
to call up the menu. Refer to the disc’s manual on how to
navigate through the menu.

C Caution

D Note

•

•

Menus vary among discs. Refer to the information
accompanying the disc for details.

•

[TOP MENU] or [DISC MENU / POP-UP MENU]
may not work with some discs.

Do not remove the USB storage device or switch the
unit to standby mode while the contents of the device
are being accessed. It may result in malfunction or loss
of the device data.

•

Philips cannot be held responsible if your USB storage
device is not supported, nor will Philips accept any
liability for damage or loss of stored data.

•

If a USB card reader is connected, files in an SD card
which is connected first to the slot of the reader will be
displayed.

EN - 29

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

8.

Page 30

Thursday, March 24, 2011

1:43 PM

SPECIAL PLAYBACK

8.1. Fast Forward / Fast Reverse

1. During playback, press [D (forward)] repeatedly for
fast forward.
During playback, press [E (reverse)] repeatedly for
fast reverse.
Every time you press [D (forward)] or
[E (reverse)], the playback speed will change.
2. Press [B (play)] to return to normal playback.
D Note

8.3. Step by Step Playback

1. In pause mode, press [T (next)] repeatedly.
Every time you press [T (next)], playback will
advance one step at a time.
2. Press [B (play)] or [F (pause)] to return to normal
playback.
D Note
•

Only step by step forward is available.

8.4. Repeat Playback

•

For Blu-ray Disc™, DVD and AVCHD, speed changes
in 5 different levels.

Available repeat function varies depending on the discs.

•

For audio CD, MP3 and Windows Media™ Audio,
speed changes in 3 different levels.

2. Use [K / L] to select the desired repeat mode.

•

For audio CD, fast forward / fast reverse search
between different tracks are not available during
random playback.

•

For MP3 and Windows Media™ Audio, fast forward /
fast reverse search between different files are not
available.

8.2. Slow Forward Playback

1. During playback, press [F (pause)] . Then press
[D (forward)].
Every time you press [D (forward)], the playback
speed changes in 3 different levels.
2. Press [B (play)] to return to normal playback.
D Note
•

Only slow forward is available.

1. During playback, press [REPEAT].
REPEAT MODE
Chapter Repeat
The current chapter will be
played back repeatedly.
Title Repeat
The current title will be
played back repeatedly.
Track Repeat
The current track or file
will be played back
repeatedly.
All Repeat
All tracks in the media will
be played back repeatedly.
Group Repeat
The current group (folder)
will be played back
repeatedly.
Random Repeat
(Audio CD)
Repeats the random
playback.
Random Repeat
(MP3 /
Windows Media™
Audio / JPEG)
Repeats the random
playback in a folder.
3. Press [BACK U] to exit.

EN - 30

AVAILABLE MEDIA

Page 31

Thursday, March 24, 2011

1:43 PM

D Note
•

The repeat setting will be canceled when you stop
playback.

•

When the repeat setting is set for an MP3 or WMA
folder (file), the repeat setting will be canceled if you
select other MP3 or WMA folder (file) to play back.

8.6. PiP (BONUSVIEW™) Setting
EN

E5WA0UD_EN_v3.book

Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video.
Primary
video

8.5. Slide Show

1. Follow steps 1 to 2 in “Playing Back a Disc” on page 26.

• An image will be played back from the selected file
and go to the next one in turn every 10 seconds.

1. During playback, press [BONUSVIEW (PiP)].
2. Use [K / L] to select the secondary video you want to
show.
• The secondary video will be displayed with the
secondary audio.

4. Press [C (stop)] to stop playback.
To return to the first item:

• Use [s / B] to switch between current setting and
“Off”.

Press [TOP MENU].
To return to the file played last:

3. Press [BACK U] to remove the PiP information.
• On how to output the secondary audio, refer to
“Switching Audio Soundtrack” on page 34 and
“Blu-ray Disc Audio” on page 39.

Press [DISC MENU / POP-UP MENU].
D Note
•

During playback, press [TOP MENU] to display
thumbnail screen.

•

Large-size JPEG files take a few moments to be
displayed.

1/8

Secondary
video

2. Open the folder which contains the desired JPEG files.
3. Use [K / L / s / B] to select a desired file to be
played back, then press [B (play)] or [OK].

PiP

8.7. Enjoying BD-Live™ Discs Using the
Internet

You can enjoy BD-Live™ which enables you to use
interactive features when the unit is connected to the
Internet.
Examples of BD-Live™ features:
•

Online access to additional content such as movie
trailers, subtitles, BD-Java applications, etc.

•

While downloading, special video data may be played
back.
- Service and functions differ depending on the
disc. Follow the instructions given by the disc
when using the BD-Live™ function.
- Insert a USB storage device of at least 1GB
capacity before using BD-Live™ features on a
Blu-ray Disc™.
- Do not remove the USB storage device while
using BD-Live™ features.

EN - 31

E5WA0UD_EN_v3.book

Page 32

Thursday, March 24, 2011

1:43 PM

D Note

䡲

•

You must connect the unit to the Internet and set up
necessary settings in order to use BD-Live™.

1. During playback, press [OPTION] to display the play
menu.

•

For the network connection, refer to “Connection to
the Network” on page 20.

2. Use [K / L] to select “Search”, then press [OK].

•

For the network setup, refer to “Network Installation”
on page 43.

•

For certain discs, BD-Live™ setting in “Manual Setup”
may need to be changed. (Refer to page 44.)

•

Depending on your connection environment, it may
take time to connect to the Internet or the Internet
may not be connected.

•

When BD-Live™ functions are used and the unit is
connected to the Internet, you may be charged for this
communication.

•

Some discs with BD-Live™ function require memory
when playing back the content. If you cannot play back a
disc with BD-Live™ function, insert a USB storage
device (1GB or more) which is formatted on this unit.

D Note for AACS Online
•

•

•

The player or disc IDs may be sent to the content
provider when playing back a disc with BD-Live™
function.
If you save your viewing history on the server by using
these IDs, you will be introduced to other similar
movies.
You can save game score histories.

8.8. Title / Chapter Search

䡲

Using [S (previous)] / [T (next)]

1. During playback, press [T (next)] to skip the current
title or chapter and move to the next.
The title or chapter will move forward one at a time.
• If there is no chapter in one title, the current title
may be skipped.
To go back to the beginning of the current title or
chapter, press [S (previous)].
Press [S (previous)] repeatedly to go to the
previous title or chapter. The title or chapter may
move backward one at a time.

EN - 32

Using [OPTION]

3. Use [K / L] to select “Title” or “Chapter”, then press
[OK].
e.g.) Blu-ray Disc™
Search

Title

001 / 999

4. Use [K / L / s / B] to select the title / chapter
number.
5. Press [OK].
Playback will start from the beginning of the title /
chapter.
6. Press [BACK U] to exit.
䡲

Using [the Number buttons] (Direct Search)

Chapter Search
During playback of a title, enter the chapter number you
want to search using [the Number buttons].
Playback of the chapter will start in a few seconds.
D Note
•

As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described.

Page 33

Thursday, March 24, 2011

1:43 PM

8.9. Track Search

8.11. Switching Subtitles

1. During playback, press [T (next)] to skip the current
track or file and move to the next.
The track / file will move forward one at a time. To go
back to the beginning of the current track / file, press
[S (previous)].
Press it repeatedly to go to the previous track / file.
The track / file will move backward one at a time.

Some video materials may have subtitles in one or more
languages. For commercially available discs, the supported
languages can be found on the disc case. Follow the steps
below to switch the subtitle language during playback.

1. During playback, press [SUBTITLE].
2. Use [K / L] to select “Primary”, “Secondary” or
“Style”, then press [OK].
“Primary”

8.10. Time Search

“Secondary”
1. During playback, press [OPTION] to display the play
menu.

“Style”

: Sets the subtitle for the primary
video.
: Sets the subtitle for the secondary
video.
: Sets style of the subtitle.

3. Use [K / L] to select your desired subtitle or style.

2. Use [K / L] to select "Search", then press [OK].
3. Use [K / L] to select "Time", then press [OK].

Subtitle

e.g.) Blu-ray Disc™
Search

Time

00:12:44 / 11:13:14

4. Use [K / L] or [the Number buttons] to enter the
time count you want to jump to.

Primary

1 ENG / 255

Secondary

Off

Style

Off

• Use [s / B] to switch between current subtitle
setting and “Off”.
4. Press [BACK U] to exit.

e.g.) Entering 1 hour 45 minutes and 15 seconds.
Press
5. Press [OK].

1. During playback, press [SUBTITLE].
2. Use [K / L] to select your desired subtitle.

Playback will start from the desired time entered.
Subtitle

6. Press [BACK U] to exit.

1 ENG / 32

• Use [s / B] to switch between current subtitle
setting and “Off”.
3. Press [BACK U] to exit.
D Note
•

Some discs will only allow you to change the subtitles from
the disc menu or pop-up menu. Press [TOP MENU] or
[DISC MENU / POP-UP MENU] to display the disc
menu or pop-up menu.

•

If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.

•

During playback of the secondary video, the primary
subtitle setting is not available except when there is no
subtitle for the secondary video.

•

You can also change the subtitle setting from the play
menu. Play menu can be called up by pressing
[OPTION].

EN - 33

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 34

Thursday, March 24, 2011

1:43 PM

8.12. Switching Audio Soundtrack
When playing back video material recorded with two or
more soundtracks (these are often in different audio
languages or audio formats), you can switch them during
playback. For Blu-ray Disc™, available audio varies
depending on “Blu-ray Disc Audio” setting. Refer to page
39 for more information.

1. During playback, press [AUDIO].
2. Use [K / L] to select “Primary” or “Secondary”, then
press [OK].
“Primary” : Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
3. Use [K / L] to select your desired audio stream
channel.
Audio

Primary

1 ENG Dolby D Multi-ch / 3

Secondary

1 ENG DTS

D Note
•

The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray Disc
Audio” is set to “Primary Audio Only”. (For some Bluray™ discs, secondary audio will be output even when
secondary video is off.)

•

The sound mode cannot be changed during playback of
discs not recorded in multiple audio mode.

•

Some discs allow changing the audio language setting on
the disc menu. (Operation varies depending on the
discs. Refer to the manual accompanying the disc.)

•

[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).

•

If the disc has no audio language, “Not Available” will be
displayed on the TV screen.

•

For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.

•

You can also change the audio setting from the play
menu. Play menu can be called up by pressing
[OPTION].

Multi-ch / 3

[Decoding Format] : Dolby D

• For “Secondary”, use [s / B] to switch between
current audio setting and “Off”.

8.13. Switching Camera Angles

4. Press [BACK U] to exit.

1. During playback, press [AUDIO].
2. Use [K / L] to select your desired audio stream
channel.
Audio

1 ENG Dolby D

Multi-ch / 3

[Decoding Format] : Dolby D

• For audio CD, you can select following options.
“Stereo”
“L-ch”
“R-ch”

: Both right and left channels are
active (stereo).
: Only left channel is active.
: Only right channel is active.

3. Press [BACK U] to exit.

EN - 34

Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You can
change the camera angle when
appears on the TV
screen.
1. During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2. Use [K / L] to select your desired angle.
3. Press [BACK U] to exit.
D Note
•

If “Angle Icon” setting is set to “Off”,
will not
appear on the TV screen. (Refer to page 41.)

•

You can also change the angle setting from the play
menu. Play menu can be called up by pressing
[OPTION].

E5WA0UD_EN_v3.book

Page 35

Thursday, March 24, 2011

1:43 PM

8.16. Virtual Surround

You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.

You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.

EN

8.14. Black Level

1. During playback, press [OPTION] to display the play
menu.

1. During playback, press [OPTION] to display the play
menu.

2. Use [K / L] to select “Black Level”, then press [OK].

2. Use [K / L] to select “Virtual Surround”, then press
[OK].

3. Use [K / L] to select your desired setting.

3. Use [K / L] to select your desired setting.

e.g.) Blu-ray Disc™

e.g.) Blu-ray Disc™

Black Level

On

“On” : Makes the dark parts blacker with additional
contrast and brightness.
“Off” : Shows the original picture as recorded.
4. Press [BACK U] to exit.
D Note
•

The setting will remain the same even if the unit is
switched to standby mode.

•

“Black Level” is not effective under the following
conditions.

Virtual Surround

Off

“On” : Activates surround effect.
“Off” : Deactivates surround effect.
4. Press [BACK U] to exit.
D Note
•

Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.

•

For the virtual surround, audio signal will always be
2-channel LPCM.

- When the picture is output from HDMI OUT jack.

8.15. Noise Reduction

Reduces the noise of the playback picture.
1. During playback, press [OPTION] to display the play
menu.
2. Use [K / L] to select “Noise Reduction”, then press
[OK].
3. Use [K / L] to select your desired setting.
e.g.) Blu-ray Disc™
Noise Reduction

Off

“On” : Activates noise reduction.
“Off” : Deactivates noise reduction.
4. Press [BACK U] to exit.
D Note
•

The setting will remain the same even if the unit is
switched to standby mode.

EN - 35

E5WA0UD_EN_v3.book

Page 36

Thursday, March 24, 2011

1:43 PM

Philips Wireless MediaConnect Help

8.17. Philips Wireless MediaConnect
With this feature, you can enjoy your TV as a PC monitor
wirelessly using your home network. Make sure you
download the Philips Wireless MediaConnect software and
install it on your PC before you perform the steps below.
䡲

To read the Philips Wireless MediaConnect Help, right
click the program icon in the notification tray of the PC and
select Help.
Specifics
You can project high definition (HD) or standard definition
(SD) video, depending on the processing power of your PC.
For smooth playback of HD video, please use a hardware
accelerated video player on your computer.
A hardware accelerated video player uses the graphics
adapter of your PC to render HD video rather than the
processor. This frees up the processor for Philips Wireless
MediaConnect video encoding. The content protection on
most DVD or Blu-ray Disc™ movies might restrict
watching the movie on TV when the disc is playing on a PC.
The TV shows PC media files with a small delay. Philips
Wireless MediaConnect is only available for PC.

Install Philips Wireless MediaConnect

1. Press [ (home)] on the Blu-ray Disc™ Player
remote.
2. Use [K / L / s / B] to select “Setup”, then press
[OK].
3. Use [K / L] to select “Network Setup”, then press
[OK].
4. Use [K / L] to select “MediaConnect”, then press
[OK].
• Write down the 12-digit code displayed on the
screen. You will need this to download
MediaConnect software.

PC and network requirements

5. Start your Internet browser on your PC and open the
Philips Wireless MediaConnect download page at
www.wifimediaconnect.philips.com. On the website,
you can check the necessary PC system requirements.

Supported OS

6. Enter the 12-digit code you wrote at step 4 and
download the MediaConnect software.

•

Intel Core 2 Duo 1.8GHz

7. Click the “Download now” button to download the
free Philips Wireless MediaConnect software.

•

512MB RAM

•

IEEE 802.11n (PC and wireless router)

8. Once downloaded, run the file “Philips Wireless
MediaConnect_setup.exe”. Follow the instructions on
your PC to complete software installation.
䡲

Using Philips Wireless MediaConnect

1. Launch Philips Wireless MediaConnect on your PC
first.
• Select “Start projecting” with right click on the
the system tray.

in

2. Press [ (home)] on the Blu-ray Disc™ Player
remote.
3. Use [K / L / s / B] to select “MediaConnect”, then
press [OK].
• The startup screen for Philips Wireless
MediaConnect will be displayed and the unit searches
for an available PC that is running Philips Wireless
MediaConnect software.
Once connected, the Philips Wireless MediaConnect
software will encode and stream the screen of your PC as a
video along with audio.
Depending on your computer and network configuration,
there will be a delay between your PC screen and the TV
but the audio-video will always be in sync.

EN - 36

Windows XP, Windows Vista, Windows 7 (PC only)
Minimum requirements

Recommended requirements
•

Intel Core 2 Duo 2.1GHz

•

1GB RAM

9.

Page 37

Thursday, March 24, 2011

1:43 PM

NETWORK SERVICES

10. PANDORA OPERATIONS
With this unit, You can instantly listen to personalized
radio stations streamed over the Internet from Pandora.

9.1. Before Using Network Services
Please follow the instructions below before using network
features.
1. Connect this unit to the Internet.
• Refer to “Connection to the Network” on page 20.
2. Set up the necessary network connection settings.
3. Press [Net-TV].
• Net TV screen will appear.
• For the first time only, "Philips Terms of Use
Internet Enabled Product" screen will appear. After
confirming the content, press [OK].

䡲

1

10.1. Activating Pandora
In order to listen to Internet radio streamed from Pandora
via the Internet, you must create a Pandora account and
activate this unit.

• Refer to “Network Installation” on page 43.

4. Press [

To learn more about Pandora, please visit
www.pandora.com

(home)] to exit.

1. Follow steps 1 to 3 in “Before Using Network Services”
on page 37.
2. Use [K / L / s / B] to select “PANDORA”, then
press [OK].
3. Use [K / L] to select “CREATE NEW
ACCOUNT”, then press [OK].

Guide to Net TV menu screen

4. Use [K / L] to select “No, I am new to Pandora.”,
then press [OK].
5. Note the activation code and website address displayed
on the TV screen.

All
Video
Music
Game
News
Lifestyle

6. On your PC, visit the website address noted at step 5.
7. Follow directions on the website to create your
account.

2
Terms of Use

4

Country

8. On this unit, select “CONTINUE” and press [OK]
to complete activation.

USA

3

1. Sorting items :
Categorizes genre of each services
2. Network Service icons :
Displays service icons
3. Country :
Selects what country you live
4. Terms of Use :
Displays a clause of net service

9.2. Information on Network Services
For detailed information on 3rd party Internet services,
please visit the service providers website:
Netflix
: http://www.netflix.com/HowItWorks
Film Fresh : http://filmfresh.roxionow.com/
Blockbuster : http://www.blockbuster.com
VUDU
: http://www.vudu.com/product_overview.html

10.2. Adding Pandora User Accounts
You can add multiple Pandora user accounts on this unit.
1. Follow steps 1 to 3 in “Activating Pandora” on page 37.
2. Use [K / L] to select “Yes, I have a Pandora
account”, then press [OK].
3. Enter your e-mail address, then press [OK] while
“OK” is selected.
4. Enter a password, then press [OK] while “OK” is
selected.
5. Use [K / L] to select “SIGN IN”, then press [OK].
• Your account is added to the user list and player
screen appears on the TV screen.
D Note
•

Pandora is available only in the United States.

•

You can add up to 5 accounts. After creating 5
accounts, “CREATE NEW ACCOUNT” is not
displayed.

•

If you forget your password, please enter your Pandora
account's e-mail address and select “Password
Recovery”, then press [OK]. After a while, an e-mail
of password reset will be sent to the e-mail address.
EN - 37

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 38

Thursday, March 24, 2011

1:43 PM

10.3. Creating a New Station

10.4. Guide to the Player Screen

By entering your favorite artists or songs, Pandora selects
music and creates a new station for you on the basis of the
entered information.

On the player screen, you can set various options to the
currently playing song.

1 2 3 4

1. On the player screen, press [Blue] to display station
list.

American Oldies Radio

ABC

2. Press [Yellow] to call up the “Tool Menu”.

XXXXX
XXXXX

3. Use [K / L] to select “Create a new station”, then
press [OK].

4:52

0:00

4. Enter a name of your favorite artist or song, then press
[OK] while “OK” is selected.
• Search result will appear on the right side of the TV
screen.
• If the selection screen of result type appears, use
[K / L] to select the desired type, then press [OK].

Station List

1.

: Give thumbs up to the currently
playing song. Pandora will play songs
similar to the song.

2.

: Give thumbs down to the currently
playing song. Pandora will skip and will
not play the song.

3.

: Bookmarks the currently playing song.
You can view your bookmarked songs
list by accessing Pandora website and
log into your account.

4.

: Tells Pandora that you do not like the
currently playing song. Pandora will
not play the song for about a month.

5. Use [K / L] to select the desired station, then press
[OK] to start the playback.
Button
[F (pause)]

[C (stop)]
[T (next)]

Action
Pause the playback.
Resume the playback, press
[B (play)].
Stop the playback and the station list
will appear.
Skips to the next song.

D Note
•

On the “Tool Menu”, you can delete or rename the
currently selected station.

EN - 38

E5WA0UD_EN_v3.book

Page 39

Thursday, March 24, 2011

1:43 PM

EN

11. LIST OF SETTINGS
In the setup menu, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menu.
1. Press [

(home)] to access the home menu.

2. Use [K / L / s / B] to select “Setup”, then press [OK].
3. Use [K / L] to select the desired setting, then press [OK].
4. Use [K / L] to move the highlight up and down in the list.
5. To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [BACK U].
6. Press [

(home)] to exit.

Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category
Video Setup

Menus / Options
3D Output

TV Display

HDMI Video

HDMI Deep Color
De-interlacing Mode
Audio Setup

Night Mode

HDMI Audio

Digital Audio
PCM Downsampling
Blu-ray Disc Audio
Network Setup

Network Installation
View Network Settings
View Wireless Settings
Netflix ESN
MediaConnect
Deactivation

Auto (XX)
3D
2D
4:3 Normal
4:3 Crop
16:9 Widescreen
16:9 Squeeze
Auto
480p
720p
1080i
1080p
1080p/24
Auto
Off
Auto
Video
Auto
On
Off
Bitstream
LPCM
Off
Bitstream
LPCM
On
Off
Mix Audio Output
Primary Audio Only
Start
Connection Test

Netflix
FILM FRESH
BLOCKBUSTER
VUDU

EN - 39

E5WA0UD_EN_v3.book

Page 40

Thursday, March 24, 2011

1:43 PM

Category
EasyLink Setup

Menus / Options
EasyLink
One Touch Play
One Touch Standby

Preference Setup

Menu Language

Audio

Subtitle

EN - 40

On
Off
On
Off
On
Off
Auto (XXXX)
English
Español
Français
Original
Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish
Off
Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish

Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other
Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other

Page 41

Thursday, March 24, 2011

1:43 PM

Category
Preference Setup

Menus / Options
Disc Menu

Parental Control

Change Password
Screen Saver
Angle Icon
Display Panel

Advanced Setup

Software Update

Automatically check for latest
software
Quick Start Mode*
Version Info
Restore default settings

Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish
Off
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]

Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other

EN

E5WA0UD_EN_v3.book

4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]

On
Off
On
Off
Auto
Bright
Dimmer
Disc
Network
USB
On
Off
On
Off
Reset Settings
Format USB
(Unit) Erase Saved BD-ROM Data
(USB) Erase Saved BD-ROM Data
Reset Network Settings

* When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.

EN - 41

E5WA0UD_EN_v3.book

Page 42

Thursday, March 24, 2011

1:43 PM

12. SETUPS

12.2. HDMI Video
(home) A

12.1. TV Display
(home)

A

“Setup”

A

“Video Setup”

Option

4:3 Normal

4:3

4:3 Crop

16:9

16:9 Widescreen

16:9

4:3

EN - 42

A

“Video Setup”

A

“HDMI Video”

Set the resolution of the video signal being output from the
HDMI OUT jack.
A

“TV Display”

Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your
TV monitor without distorting the picture. Descriptions of
each setting are as follows:
Video
Your TV
source

“Setup”

16:9 Squeeze

Description

To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
both sides of the
picture fits the 4:3
TV.
To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.

You can select the desired “HDMI Video” among the
settings listed below:
“Auto”,“480p”,“720p”,“1080i”,“1080p”,“1080p/24”
Actual Output Resolution :
Setting in
the “HDMI
Video”

480i/60

720p/60

1080i/60

720p/24

1080p/24

480p

480p/60

480p/60

480p/60

480p/60

480p/60

720p

720p/60

720p/60

720p/60

720p/60

720p/60

1080i

1080i/60

1080i/60

1080i/60

1080i/60

1080i/60

1080p

1080p/60

1080p/60

1080p/60

1080p/60

1080p/60

1080p/24

1080p/60

1080p/60

1080p/60

1080p/60

1080p/24

Auto

Source

The highest resolution supported by your display device will
be in effect automatically.

•

Composite video output (VIDEO OUT) jack can only
output 480i/60.

•

For AVCHD, outputting the video in 24 frames per
second (1080p/24) is not available.

D Note
•

You can also change the resolution of the video signal
being output from the HDMI OUT jack by pressing
[HDMI] repeatedly.

•

Pressing [HDMI] does not work when HDMI cable is
not connected, or when no video signal is being output
from the HDMI OUT jack.

•

Pressing [HDMI] does not work during the playback
of a BD-video.

•

The selected resolution must also be supported by
your display device.

•

Even if “HDMI Video” is set to “1080p/24”, for a Bluray Disc™ that is not recorded in 1080p/24 or for
DVD, the video resolution supported by the disc and
the display device will be output instead of 1080p/24.

•

Refer also to your TV’s manual.

Page 43

Thursday, March 24, 2011

1:43 PM

•

When the HDMI OUT jack is outputting the video in
1080p/24, picture will not be output from the VIDEO
OUT jack.

•

When connected to an HDCP incompatible display
device, the picture will not be displayed properly.

•

The audio signals from the HDMI OUT jack (including
the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.

•

Among the display device(s) that support HDMI, some
do not support audio output (for example, projectors).
While connected to a device such as a projector, audio
will not be output from the HDMI OUT jack.

•

•

•

When this unit’s HDMI OUT jack is connected to a
DVI-D compatible display device(s) (HDCP compatible)
with an HDMI-DVI converter cable, the signals are
output in digital RGB.
When you make a selection, the TV monitor
temporarily goes blank and then comes back again. If it
does not come back, press [HDMI] repeatedly to
change the resolution or touch and hold [B (play)]
on the front panel for 5 seconds to change the setting
back to its default.
When playing back a Frame Sequential 3D Disc, video
resolution of output picture will depend on contents on
the disc. (“HDMI Video” setting is not applicable for
Frame Sequential 3D Discs.)

Copyright protection system
To play back the digital video images of a BD-video or
DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV
receiver / amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please
read the operating instructions of your display device (or
an AV receiver / amplifier) for more information.

12.3. Network Installation
(home) A

“Setup”

A “Network Setup” A

“Network
Installation”

Set up network connection settings in order to use
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU /
Pandora or network update function.
䡲

Connection Test

After you enable a network connection or change the
network settings, always perform the connection test to
check if the connection is correctly made.
1. Use [K / L / s / B] to select “Setup” in the home
menu, then press [OK].
2. Use [K / L] to select “Network Setup”, then press
[OK].
3. Use [K / L] to select “Network Installation”, then
press [OK].
4. Use [K / L] to select “Connection Test”, then press
[OK].
• Connection test will start automatically and the test
result will appear right after the connection test
finishes.
- “Connecting...” : The test is in progress.
- “Pass” : Connection test is successfully completed.
- “Failed” : Connection test failed. Check the
connection settings.
5. Press [OK] to go back to the setup menu, or press
[ (home)] to exit.

EN - 43

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 44

Thursday, March 24, 2011

1:43 PM

D Note

Manual Setup

•

In following cases, select “Manual Setup” to set each setting
as necessary.

•

•

If the connection test passes, you are ready to use
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU /
Pandora or network update function, using the Internet
without making any additional settings.
If the connection test fails, you may need to check your
router settings and make sure the physical connection
is secure. If you need the MAC address of this unit to
complete your router settings you can view it on the
“View Network Settings” / “View Wireless Settings”
screen (refer to page 48).
When connecting this unit directly to a modem for the
first time or connecting it to a modem which was
previously connected to any other network device (e.g.
a router, PC, etc.), you may have to power cycle the
modem to reset the settings on the modem.

- When connection test failed with the setting of
“Auto Setup”.
- When instructed by your Internet service provider to
make specific settings in accordance with your
network environment.
1. Follow steps 1 to 3 in “Auto Setup” on page 44.
2. Use [K / L] to select “Manual Setup”, then press
[OK].
3. Use [K / L] to select “IP Address”, then press [OK].
4. “IP Address” setting screen will appear. Enter IP
address with cursor buttons and number buttons.
IP Address

䡲

Wired

Select “Wired” if you made a wired connection and set the
setting to “Auto Setup” or “Manual Setup”, in accordance
with your network environment.
Auto Setup
Select “Auto Setup” to set the network setting
automatically.
1. Follow steps 1 to 3 in “Connection Test” on page 43.
2. Use [K / L] to select “Start”, then press [OK].
3. Use [K / L] to select “Wired”, then press [OK].
4. Use [K / L] to select “Auto Setup”, then press [OK].
• The unit will start the connection test automatically
and the test result will appear right after the
connection test finishes.
5. Select “Finish” to activate the network settings and set
the network connection automatically.

EN - 44

Please input the IP Address.

0 . 0 . 0 . 0
Cancel

Clear

Done

• Enter the IP address after checking the specifications
of your router.
• If the IP address is unknown, check the IP address of
other devices. (e.g. PC connected via LAN cable) and
assign a different number from those of other
devices.
5. Use [K / L / s / B] to select “Done”, then press
[OK].

Page 45

Thursday, March 24, 2011

1:43 PM

6. Select “Subnet Mask”, “Default Gateway”, “Primary
DNS” and “Secondary DNS” in turn, and enter each
address number with cursor buttons and number
buttons, then press [OK].
• Enter the DNS addresses provided by your Internet
provider.
• If the DNS address is unknown, check the DNS
address of other devices (e.g. PC connected via LAN
cable) and assign the same DNS address.
Please enter your
network settings.

IP Address

xxx. xxx. xxx. xxx

Subnet Mask

xxx. xxx. xxx. xxx

Default Gateway

xxx. xxx. xxx. xxx

Primary DNS

xxx. xxx. xxx. xxx

Secondary DNS

xxx. xxx. xxx. xxx

[K / L / s / B] : Move the highlight.
[the Number buttons] : Enter numbers or letters.
[OK] : Enter the highlighted number /
letter.
*[Red] : Set the entered number or
letter.
[Green] : Cancel the network setting.
*[Blue] : Clear the entered number or
letter.
[Yellow] : Switch between abc, ABC and
@!?.
* These buttons can be used in other network settings.
11. Press [Red] to go to the “Proxy Port” setting screen.
Enter proxy port number with number buttons.
Proxy Port

Continue

Please input the Proxy Port.

Cancel

7. Use [K / L / s / B] to select “Done”, then press
[OK].

xxxxxx

8. Use [K / L / s / B] to select “Continue”, then press
[OK].
9. Use [K / L] to select “Yes” or “No” for proxy server,
then press [OK].
• If you use proxy server, select “Yes” to go to the
next step.
• If you do not use proxy server, select “No” to go to
step 13.
10. “Proxy Address” setting screen will appear. Enter
proxy address with cursor buttons, number buttons
and color key.

Cancel

Clear

Done

12. Use [K / L / s / B] to select “Done”, then press
[OK].
13. Connection speed setting screen will appear. Use
[K / L] to select the desired setting, then press [OK].
(The default setting is “Auto”.)
14. BD-Live™ setting screen will appear. Use [K / L] to
select the desired setting, then press [OK].
(The default setting is “Allow”.)
“Allow”:
Internet access is permitted for all BD-Live™ contents.

Proxy Address
Please input the Proxy Address with keypad or software keyboard.
http://xxxxx.xx.xx

“Limited Allow”:
Internet access is permitted only for BD-Live™
contents which have content owner certificates.
Internet access without the certificates is prohibited.
“Prohibit”:

Done

Cancel

Clear

a/A/@

Internet access is prohibited for all BD-Live™ contents.
15. Connection test confirmation screen will appear. Select
“Yes” to start the connection test and the test result
will appear right after the connection test finishes.
16. Press [OK] to go back to the setup menu, or press
[ (home)] to exit.

EN - 45

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 46

Thursday, March 24, 2011

1:43 PM

D Note for “IP Address”, “Subnet Mask”,
“Default Gateway”, “Primary DNS” and
“Secondary DNS”
•

The range of input numbers is between 0 and 255.

•

If you enter a number larger than 255, the number will
automatically be reset to 255.

•

When you enter a wrong number, select “Clear” to
clear. (The number will be reset back to “0”.)

•

If you want to enter a 1 or 2-digit number in one cell,
press [B] to move on to the next cell.

5. “Access Point Setting (Auto Scan)” screen will appear.
Enter the WEP / WPA key of the selected Wi-Fi
network using cursor buttons, number buttons and
color key, then press [Red].
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.
Access Point Setting (Auto Scan)
Please input the WEP/WPA key with keypad or software keyboard.
XXXXXXXXXX

D Note for “Proxy Address” and “Proxy Port”
•

The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)

•

For proxy port, certain ports might be closed, blocked
or unusable depending on your network environment.

•

Choose a connection speed in accordance with your
network environment.

•

When the settings are changed, the network
connection may be disabled depending on the device.

䡲

Done

Clear

a/A/@

6. Use [K / L] to select “Continue”, then press [OK].
Please confirm the
setting.

Wireless

SSID

Access 1

Security

WPA-PSK(AES)

WEP/WPA Key

XXXXXXXXXX

Continue

If you connect this unit to the network wirelessly, select
“Wireless” and set up necessary settings.
Please make a note of your Wi-Fi network name (SSID) and
its WEP / WPA key before proceeding with the setup.
Auto Scan

Rescan
Cancel

7. Use [K / L] to select “Auto Setup” or “Manual Setup”,
then press [OK].
• If you select “Auto Setup”, follow step 5 in “Auto
Setup” on page 44.

Search for Wi-Fi networks automatically and select the WiFi network name (SSID) from the list.

• If you select “Manual Setup”, follow steps 3 to 12 and
14 to 16 in “Manual Setup” on page 44.

1. Follow steps 1 to 2 in “Auto Setup” on page 44.
2. Use [K / L] to select “Wireless”, then press [OK].
3. Use [K / L] to select “Auto Scan”, then press [OK].
• This unit will start searching for Wi-Fi networks
automatically.
4. The result of Wi-Fi network searching will be displayed.
Use [K / L] to select the appropriate Wi-Fi network
name (SSID), then press [OK].
• If you select an SSID without “ ”, please go to step
6.
Please select the
access point.

Access 1
Access 2
Access 3
Access 4
Access 5

Rescan

Access 6
Access 7

Cancel

EN - 46

Cancel

D Note
•

The internal wireless LAN supports following
specifications
- Wi-Fi standards
: IEEE 802.11 b/g/n
- Frequency spectrum : 2.4 GHz
- Security protocol
: WEP / WPA / WPA2

Page 47

Thursday, March 24, 2011

1:43 PM

Manual Entry

Easy Connect

Set up the connection to the Wi-Fi network manually by
entering the Wi-Fi network name (SSID).

You can set up the Wi-Fi connection quickly.
(“Easy Connect” is available only when your router
supports it. For details, please refer to the user manual of
your Wi-Fi router.)

1. Follow steps 1 to 2 in “Auto Scan” on page 46.
2. Use [K / L] to select “Manual Entry”, then press
[OK].
3. “Access Point Setting (Manual Entry)” screen will
appear.
Enter the SSID using cursor buttons, number buttons
and color key, then press [Red].
4. Security mode selection screen will appear. Select the
security mode of the entered SSID, then press [OK].
• If you select “None”, please go to step 6.
Please select the
security mode.

None
WEP

Push Button Method
Please confirm your Wi-Fi router has a PBC button.
1. Follow steps 1 to 2 in “Auto Scan” on page 46.
2. Use [K / L] to select “Easy Connect”, then press
[OK].
3. Use [K / L] to select “Push Button Method”, then
press [OK]. And push the PBC (Push Button
Configuration) on your Wi-Fi router.
• The unit will start the connection test automatically
and the test result will appear right after the
connection test finishes.

WPA-PSK(TKIP)
WPA-PSK(AES)

Please push the PBC(push button
configuration) on the wireless router
and select ‘Push Button Method’
button on screen.

WPA2-PSK(TKIP)
WPA2-PSK(AES)

Push Button Method

Cancel

5. “Access Point Setting (Manual Entry)” screen will
appear.
Enter the WEP / WPA key of the Wi-Fi network using
cursor buttons, number buttons and color key, then
press [Red].
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.

Please input the PIN number into
the wireless router and select ‘PIN
Code Method’ button on screen.
65729403
Cancel

PIN Code Method

4. Select “Finish” to complete the settings.
PIN Code Method
1. Follow steps 1 to 2 in “Auto Scan” on page 46.

6. Use [K / L] to select “Continue”, then press [OK].

2. Use [K / L] to select “Easy Connect”, then press
[OK].

7. Use [K / L] to select “Auto Setup” or “Manual Setup”,
then press [OK].

3. Set up your Wi-Fi router with PIN code shown on the
TV screen.

• If you select “Auto Setup”, follow step 5 in “Auto
Setup” on page 44.
• If you select “Manual Setup”, follow steps 3 to 12 and
14 to 16 in “Manual Setup” on page 44.

• For details about setting method of your Wi-Fi
router, please refer to the user manual of the router.
4. Use [K / L] to select “PIN Code Method”, then press
[OK].
5. The unit will start the connection test automatically and
the test result will appear right after the connection
test finishes.
6. Select “Finish” to complete the settings.

EN - 47

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

䡲

Page 48

Thursday, March 24, 2011

1:43 PM

View Network Settings / View Wireless Settings

You can check the current status of network settings or
Wi-Fi settings.
1. Follow steps 1 to 2 in “Connection Test” on page 43.
2. Use [K / L] to select “View Network Settings” or
“View Wireless Settings”, then press [OK].
• The current network settings or Wi-Fi settings will
be displayed.
3. Press [
䡲

1. Follow steps 1 to 2 in “Connection Test” on page 43.
2. Use [K / L] to select “Netflix ESN”, then press [OK].
(home)] to exit.

•

This feature is available only when “Auto (XXXX)” is
selected in the “Menu Language” in the setup menu.

A

“Setup”

(home)

A

“Setup”

A

“Preference
Setup”

A

“Parental
Control”

Some BD-videos or DVD-videos feature parental lock
levels. Playback will stop if the ratings exceed the levels you
set, it will require you to enter a password before the disc
will play back. This feature prevents your children from
viewing inappropriate material.
1. Use [K / L / s / B] to select “Setup” in the home
menu, then press [OK].

12.4. EasyLink Setup

2. Use [K / L] to select “Preference Setup”, then press
[OK].
A

“EasyLink Setup”

This unit supports Philips EasyLink, which enables your TV
(limited to Philips brand EasyLink TV) to act in conjunction
with this unit, or vice versa. Compliant TV must be
connected to the HDMI OUT jack.
When “EasyLink” setting is set to “On”, functions listed
below will be available.
One Touch Play
When the operations with following buttons of the remote
control of this unit are performed, the TV will automatically
be turned on and switched to the appropriate input
channel. (“One Touch Play” can be turned off by setting it
to “Off”.)
Buttons for one touch play:
- [B (play)], [S (previous)], [T (next)],
[the Number buttons], [ (home)], or
[Net-TV]
- [TOP MENU], or [DISC MENU / POP-UP MENU]
(when a disc is inserted in the unit)
One Touch Standby
When you press and hold [Q (standby/on)] for 2
seconds, it turns off the power of the TV first and then it
turns off the power on this unit. When the connected
EasyLink compatible display device is turned off first, it then
turn off the power on this unit. (“One Touch Standby” can
be turned off by setting it to “Off”.)

EN - 48

The unit recognizes the OSD language set of the TV and
automatically sets the same language as the player menu
language (OSD menu language) for this unit. Refer to the
“Menu Language” on page 40 for available languages.

12.5. Parental Control

You can view the ESN number which is a serial number
used by Netflix to identify a device. Netflix customer
service might ask you for this number during
troubleshooting.

(home)

Get & Set Menu Language

(home)] to exit.

Netflix ESN

3. Press [

System Information

3. Use [K / L] to select “Parental Control”, then press
[OK].

Page 49

Thursday, March 24, 2011

1:43 PM

For the first time only :

䡲

Use [the Number buttons] to enter any 4-digit
number (except for 4737). That number will be used as
the password. Record your password, in case you
forget it.

1. Follow steps 1 to 2 in “Parental Control” on page 48.

• If you forget the password, enter [4], [7], [3], [7].
The password will be cleared and rating level will be
set to “Off”.
• While you input the password, select “Clear” to
clear the number, then re-enter the password.
Once a password is set :
Use [the Number buttons] to enter your 4-digit
password.
4. Use [K / L] to select your desired parental lock level,
then press [OK].
5. Press [

(home)] to exit.

Off

•

8 [Adult]

•

7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]

•
•
•
•
•
•
•

RATING EXPLANATIONS
Parental control is inactive; all discs
can play back.
DVD software of any grades
(adult / general / children) can be
played back.
No one under 17.
Restricted; under 17.
Parental Guidance Recommended.
Unsuitable for children under 13.
Parental Guidance suggested.
General Audience.
Suitable for children.

To cancel parental lock temporarily :
Some discs allow you to cancel parental lock temporarily.
With these discs, the message below will appear when you
try to play them back.
“Enter current password.”
Follow the instruction which appears on the TV screen to
cancel parental lock. After entering the password, “Parental
Control” appears. Select desired parental lock level, then
press [OK].

Change Password

2. Use [K / L] to select “Change Password”, then press
[OK].
3. Use [the Number buttons] to enter your 4-digit
password.
4. Use [the Number buttons] to enter a new 4-digit
password.
5. Use [the Number buttons] to retype the same new
4-digit password.
6. Use [K / L / s / B] to select “Confirm”, then press
[OK].
7. Press [

(home)] to exit.

12.6. Software Update
(home)

A

“Setup”

A

“Advanced
Setup”

A

“Software
Update”

Philips continuously tries to improve its products and we
strongly recommend that you update the software when
updates are available. New software can be downloaded
from our website at www.philips.com/support using the
model number of your Blu-ray Disc™ Player (e.g.
BDP5506) to find information.
䡲

Disc / USB Update

You can update the software by using a disc or USB storage
device.
1. Use [K / L / s / B] to select “Setup” in the home
menu, then press [OK].
2. Use [K / L] to select “Advanced Setup”, then press
[OK].
3. Use [K / L] to select “Software Update”, then press
[OK].
4. Use [K / L] to select “Disc” or “USB”, then press
[OK].
5. Use [s / B] to select “Yes”, then press [OK].
6. Insert the disc or USB storage device for software
update.
7. After loading the disc or USB storage device,
confirmation message will appear. Select “Yes” and
press [OK] to start updating.
• It may take a while to complete the update.
8. After the update finishes, this unit will restart. Remove
the disc or USB storage device from the unit.
C Caution
•

Please do not disconnect the AC power cord or USB
storage device while executing the “Disc” or “USB”
update.

EN - 49

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 50

Thursday, March 24, 2011

1:43 PM

D Note
•

Please visit www.philips.com/support to download
the latest software version. Please read the software
update Read-me file carefully before performing an
update using a disc or USB storage device.

•

All settings will remain the same even if you update the
software version.

•

The version of Netflix will also be updated if newer
version of Netflix is available when updating the
software.

䡲

Network Update

You can update the software by connecting the unit to the
Internet.
1. Follow steps 1 to 3 in “Disc / USB Update” on page 49.

12.7. Restore Default Settings
(home) A

“Setup”

A

“Advanced
Setup”

A

“Restore default
settings”

Menus to reset player settings, format USB storage device,
local storage and clear network settings.
1. Use [K / L / s / B] to select “Setup” in the home
menu, then press [OK].
2. Use [K / L] to select “Advanced Setup”, then press
[OK].
3. Use [K / L] to select “Restore default settings”, then
press [OK].
4. Use [K / L] to select the desired setting, then press
[OK].

2. Use [K / L] to select “Network”, then press [OK].

“Reset Settings” :

3. Use [s / B] to select “Yes”, then press [OK].

All the settings except for the “Parental Control” and
“Network Installation” setting will be reset to default.

• This unit will then start checking for the latest
software version.

“Format USB” (Available only when a USB
storage device is connected):

4. Confirmation message will appear. Select “Yes”, then
press [OK].

Initialize the USB storage device.

• The unit will start downloading the latest software
version.

“(Unit) Erase Saved BD-ROM Data”:

5. When the download completes, confirmation message
will appear. Press [OK].

Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, on this player.

• The unit will start updating the software version.

“(USB) Erase Saved BD-ROM Data” (Available
only when a USB storage device is connected):

• It may take a while to complete the update.
6. After updating finishes, this unit will restart
automatically.

Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the USB storage
device.

C Caution
•

D Note
•

“Reset Network Settings”:

Please do not unplug the AC power cord or LAN cable
while executing the “Network” update.

In order to update the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.

•

For the network connection, refer to “Connection to
the Network” on page 20.

•

For the network setup, refer to “Network Installation”
on page 43.

•

All settings will remain the same even if you update the
software version.

•

The version of Netflix will also be updated if newer
version of Netflix is available when updating the
software.

EN - 50

Reset the network setting to the default.
5. Use [s / B] to select “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
6. Press [

(home)] to exit.

C Caution
•

Do not remove the USB storage device while executing
the “Format USB” or “(USB) Erase Saved BD-ROM
Data”. It will damage the USB storage device.

D Note
•

“Format USB” and “(USB) Erase Saved BD-ROM Data”
are not available when a Blu-ray Disc™ is in the unit.

E5WA0UD_EN_v3.book

Page 51

Thursday, March 24, 2011

1:43 PM

Problem
Tip
No reaction to the remote control. Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries with the correct polarity.
Insert new batteries in the remote control.
No video signal on the display
Turn on the TV.
device.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI] .
Touch and hold [B (play)] on the front panel for 5 seconds to change the setting
back to its default.
No audio / video signal on the
If the unit is connected to the unauthorized display device with an HDMI cable, the
display device via HDMI cable.
audio / video signal may not be output.
Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the
TV and this unit and then reconnect it to both the devices while they are powered
on.
Ensure that your HDMI cable is certified.
No high-definition video signal on
Does the disc contain high-definition video? High-definition video is not available
the TV screen.
when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not available
when the TV does not support it.
No 3D video on the TV screen.
Check if your TV is 3D capable.
Use a 3D compatible HDMI cable to connect the 3D capable TV.
Set “3D Output” to “Auto (XX)”. (Refer to page 39.)
Wear 3D glasses and make sure they are switched on and in sync with your TV.
Check the battery levels of your glasses.
Refer to your 3D TV's user manual for more information.
No audio signal from the
Assign the audio input of the TV to the corresponding video input.
loudspeakers of the TV screen.
Ensure that the TV's speakers are turned on in the TV menu.
Ensure that the TV's speakers are not muted.
No audio signal from the
Turn on the audio system.
loudspeakers of the audio system.
Set the audio system to the correct external audio input.
Increase the volume level of the audio system.
Cannot play back a disc.
Make sure that the product supports the disc.
Check the region code of the disc. This unit supports following region codes.
- Blu-ray Disc™ :“A”
- DVD
:“ALL” or “1” for BDP5506/F7 (USA / Canada)
“ALL” or “4” for BDP5506/F8 (Mexico)
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
USB storage device cannot be read. The format of the device is not accepted by this unit or the device is not compatible.
Cannot play back JPEG files from a Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
disc.
Cannot play back MP3 files from a
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
disc.
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.
Cannot play back Windows
Make sure that the sample rate of the Windows Media™ Audio files is
Media™ Audio files from a disc.
44.1 kHz or 48 kHz.

EN - 51

EN

13. TROUBLESHOOTING

E5WA0UD_EN_v3.book

Page 52

Thursday, March 24, 2011

1:43 PM

Problem

Tip
The operation is not possible.

in the upper right hand corner
of the TV screen.
Buttons do not work or the unit
To completely reset the unit, touch and hold [Q (standby/on)] on the front panel
stops responding.
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for
5-10 seconds.
Cannot find a JPEG file.
Make sure that the selected group (folder) does not contain more than 9,999 files
for Blu-ray Disc™ / DVD / USB storage device, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find an MP3 and
Make sure that the selected folder does not contain more than 9,999 files for Blu-ray
Windows Media™ Audio file.
Disc™ / DVD / USB storage device, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA for
Windows Media™ Audio.
Cannot play back AVCHD file.
This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t) written
to a DVD. The DVD containing AVCHD files must have a proper file and folder
structure meeting AVCHD format specifications.
Please use AVCHD compliant device / software to burn or copy AVCHD files to
DVD. (Please refer to user manuals of the device / software for more information.)
Error message appears when I select Make sure that the unit is connected to the Philips brand EasyLink TV and the
“Auto” in the “Menu Language”.
“EasyLink” is set to “On”.
This error message may appear when your TV’s OSD language is not supported by
this unit.
Cannot connect to the network.
Check if the network connection is properly made.
Turn on the modem or router.
Check the network settings.
Check if the router and/or modem is correctly connected.
Check the BD-Live™ setting in “Manual Setup” on page 44.
When connecting directly to a modem via a LAN cable, you might need to power
cycle the modem to reset settings on the modem.

EN - 52

Page 53

Thursday, March 24, 2011

Problem
Cannot use the Wi-Fi connection.

Cannot get into the PC's screen
after “MediaConnect” is selected.

I have a 1.8GHz CPU but
MediaConnect does not work on
my PC.
Cannot connect to the network
while my PC is connected to the
network.
The capacity of the USB storage
device decreased.
MPEG-2 video and audio on the
USB storage device cannot be
played back.
The contents of the USB storage
device cannot be read.

1:43 PM

Tip
Once you have activated the Wi-Fi connection please wait for 30 seconds for the
connection to be established after turning on the unit, before trying to access
network features such as BD-Live™, Netflix, Film Fresh, Blockbuster, VUDU or
Pandora.
The startup screen (Philips logo with spinning circle) keep displaying until the unit
found the PC that is running Philips Wireless MediaConnect.
Make sure if the network connection is connected properly.
Check if your PC runs Philips Wireless MediaConnect.
Make sure this unit and PC are connected on the same network.
For smooth operation of your PC while Philips MediaConnect is running you need a
mainstream dual core processor from Intel or AMD.
Intel: Core2Duo or Core i3/5/7 @ 1.8GHz or higher.
AMD: Athlon II X2, Turion II Dual-Core or Phenom X2 @ 2GHz or higher.
Check the content of your Internet service contract to see if your Internet Service
Provider prevents multiple terminals connecting at the same time.
Data may be written to the USB storage device when a BD-video that supports the
virtual package is used and a USB storage device is connected.
MPEG-2 is noncompliant on this unit.

The USB storage device is not compatible or the contents on the USB storage device
may be damaged.
Turn off and then turn the unit on again.
Cannot use the BD-Live™ function Insert a USB storage device with enough capacity (1GB or more).
or download of data does not
Check if a USB storage device is correctly inserted.
perform properly.
Cannot play back BD-video (BDInsert a USB storage device (1GB or more) which is formatted on this unit. Some
ROM Profile 2.0).
discs with BD-Live™ function require memory when playing back the content.
Do not remove the USB storage device during playback.

EN - 53

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 54

Thursday, March 24, 2011

1:43 PM

13.1. Downloading an Electronic Copy
To obtain an electronic copy of this manual :
1. Point your browser to www.philips.com/support
2. Choose your country of location.
3. Enter the model number or a keyword in the “Find your product” field. Alternatively, you can browse the catalog.
4. Click the description or model.
5. Under Product support, click “User manuals”.

13.2. Contact Us
•

If you cannot resolve your problem, refer to the FAQ for this Blu-ray Disc™ Player at www.philips.com/support
If the problem remains unresolved, contact the Customer Support Center in your country.

D Note
•

Do not attempt to repair the Blu-ray Disc™ Player yourself. This may cause severe injury, irreparable damage to your
Blu-ray Disc™ Player or void your warranty.

•

Please have your Blu-ray Disc™ Player model and serial number available before contacting us.
These numbers are available on the cabinet, as well as on the packaging.

EN - 54

Page 55

Thursday, March 24, 2011

1:43 PM

14. GLOSSARY

Digital Audio

An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.

An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an analog
signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.

Aspect Ratio

DNS Server

The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as its height).

A server which translates Internet domain names into IP
addresses.

Analog Audio

AVCHD
AVCHD is a new format for high definition video
camcorders which can record and play high-resolution HD
images.

BD-Live™
BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0)
which contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW™ function.

Dolby Digital
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multichannel audio.

Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.

Dolby TrueHD
Blockbuster
Blockbuster is online service which you can rent or
purchase movies and TV episodes streamed over the
Internet.
Blockbuster is available only in the United States.

Blu-ray Disc™
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.

Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.

Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc™ supports
7.1 multi-channel surround sound output.

DTS® (Digital Theater System)
DTS® is a multi channel surround sound system. You can
enjoy movie dynamic and realistic sound like movie theater.
DTS surround sound technologies were developed by DTS,
Inc.

DTS-HD®
DTS-HD® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc™ supports 7.1 multi-channel surround sound
output.

Film Fresh
Film Fresh is online service which you can rent or purchase
movies and TV episodes streamed over the Internet.
Film Fresh is available only in the United States.

EN - 55

EN

E5WA0UD_EN_v3.book

E5WA0UD_EN_v3.book

Page 56

Thursday, March 24, 2011

1:43 PM

Gateway

Pandora

IP address of the electronic devices (such as router) which
provide Internet access.

Pandora is the personalized Internet radio service.
You can instantly listen to personalized radio stations
streamed over the Internet from Pandora.
Pandora is available only in the United States.

HDMI (High-Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.

Hub
A device used for connecting multiple device to the
network.

IP Address
A set of numbers which are assigned to devices
participating in a computer network.

JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or
USB storage device from a computer and play back the files
on this unit.

LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.

Local Storage
A storage area of sub contents for playing virtual packages
on BD-video.

PCM (Pulse Code Modulation)
The most common system of encoding digital audio, found
on CD and DAT. Excellent quality, but requires a lot of
data compared to formats such as Dolby Digital and MPEG
audio. For compatibility with digital audio recorders (CD,
MD and DAT) and AV amplifiers with digital inputs, this
unit can convert Dolby Digital, DTS, and MPEG audio to
PCM. See also “Digital Audio”.

Proxy Server
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.

Region Code
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).

Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.

Sampling Frequency
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or USB
storage device from the computer and play back the files on
this unit.

The rate which sound is measured by a specified interval to
turn into digital audio data. The numbers of sampling in one
second defines as sampling frequency. The higher the rate,
the better the sound quality.

Subnet Mask
Netflix
Netflix is online movie rental service, offering online
streaming to customers in the United States.

A mask which is used to determine what subnet an IP
address belongs to.

Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.

EN - 56

E5WA0UD_EN_v3.book

Page 57

Thursday, March 24, 2011

1:43 PM

Track
EN

Audio CD uses tracks to divide up the content of a disc.
The BD-video or DVD-video equivalent is called a chapter.
See also “Chapter”.

Virtual Package
The function which copies data to other media (local
storage) from the Internet and plays secondary video,
secondary audio and subtitles at the same time. The
method of the playback varies depending on discs.

VUDU
VUDU is a leading HD on-demand video service which
utilizes the Internet connection to deliver the highest
quality on-demand video and Internet applications.

Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R,
CD-RW/-R, or USB storage device from a computer and
play them back on this unit.

x.v.Color
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based on
the xvYCC specifications and is a trademark of Sony
Corporation.

EN - 57

E5WA0UD_EN_v3.book

Page 58

Thursday, March 24, 2011

1:43 PM

15. LANGUAGE CODE LIST
Language

Code

A-B

Language

Code

Language

Code

Language

Code

French [FRE]

5264

Macedonian

5957

Siswat

6565

Abkhazian

4748

Frisian

5271

Malagasy

5953

Slovak [SLO]

6557

Afar

4747

Galician

5358

Malay

5965

Slovenian

6558

Afrikaans

4752

Georgian

5747

Malayalam

5958

Somali

6561

Albanian

6563

German [GER]

5051

Maltese

5966

Spanish [SPA]

5165

Amharic

4759

Greek [GRE]

5158

Maori

5955

Sundanese

6567

Arabic

4764

Greenlandic

5758

Marathi

5964

Swahili

6569

Armenian

5471

Guarani

5360

Moldavian

5961

Swedish [SWE]

6568

Assamese

4765

Gujarati

5367

Mongolian

5960

Aymara

4771

Hausa

5447

Nauru

6047

Tagalog

6658

Azerbaijani

4772

Hebrew

5569

Nepali

6051

Tajik

6653

Bashkir

4847

Hindi

5455

Norwegian [NOR]

6061

Tamil

6647

Basque

5167

Hungarian [HUN]

Tatar

6666

Bengali;Bangla

4860

6149

Telugu

6651

5467

I-K

O-R
Occitan

T

Bhutani

5072

Icelandic [ICE]

5565

Oriya

6164

Thai

6654

Bihari

4854

Indonesian

5560

Oromo (Afan)

6159

Tibetan

4861

Bislama

4855

Interlingua

5547

Panjabi

6247

Tigrinya

6655

Breton

4864

Interlingue

5551

Pashto;Pushto

6265

Tonga

6661

Bulgarian [BUL]

4853

Inupiak

5557

Persian

5247

Tsonga

6665

Burmese

5971

Irish [GLE]

5347

Polish [POL]

6258

Turkish [TUR]

6664

Byelorussian

4851

C-E

Italian [ITA]

5566

Portuguese [POR]

6266

Turkmen

6657

Japanese [JPN]

5647

Quechua

6367

Twi

6669

Cambodian

5759

Javanese

5669

Rhaeto-Romance

6459

Catalan

4947

Kannada

5760

Romanian [RUM]

6461

Russian [RUS]

6467

U-Z
Ukrainian

6757

Chinese [CHI]

7254

Kashmiri

5765

Corsican

4961

Kazakh

5757

Croatian

5464

Kinyarwanda

6469

Samoan

6559

Vietnamese

6855

Czech [CZE]

4965

Kirghiz

5771

Sangho

6553

Volapuk

6861

Danish [DAN]

5047

Kirundi

6460

Sanskrit

6547

Welsh

4971

Dutch [DUT]

6058

Korean [KOR]

5761

Scots Gaelic

5350

Wolof

6961

English [ENG]

5160

Kurdish

5767

Esperanto

5161

Estonian

5166
F-H

L-N

S

Urdu

6764

Uzbek

6772

Serbian

6564

Xhosa

7054

Serbo-Croatian

6554

Yiddish

5655

Laothian

5861

Sesotho

6566

Yoruba

7161

Latin

5847

Setswana

6660

Zulu

7267

Faroese

5261

Latvian;Lettish

5868

Shona

6560

Fiji

5256

Lingala

5860

Sindhi

6550

Finnish [FIN]

5255

Lithuanian

5866

Singhalese

6555

D Note
•

If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time
you change the subtitle language setting on page 33 or audio language setting on page 34. If you choose any other
languages, “---” will be displayed instead.

EN - 58

E5WA0UD_EN_v3.book

Page 59

Thursday, March 24, 2011

1:43 PM

Signal System
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity

EN

16. SPECIFICATIONS
General
NTSC Color
120 V AC, 60 Hz
20 W (standby: 0.5 W)
17.2 x 1.6 x 8.5 inches (435 x 38.9 x 213.85 mm)
4.4 lbs. (2.0 kg)
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals
USB input
TYPE A

USB 2.0
Bus power current: MAX. 500mA

Audio output (Analog)
RCA jack x 2
Video output

L/R: 2 Vrms (output impedance: more than 1k)

RCA jack x 1
Audio output (Digital)

1 Vp-p (75)

RCA jack x 1
HDMI output

500 mVp-p (75)

HDMI jack x 1
LAN terminal
Wireless LAN (Internal)

Video: 480p, 720p, 1080i, 1080p, 1080p24/Audio
10BASE-T / 100BASE-TX
IEEE 802.11 b/g/n

D Note
•

The specifications and design of this product are subject to change without notice.

EN - 59

E5WA0UD_EN_v3.book

Page 60

Thursday, March 24, 2011

1:43 PM

17. IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D TELEVISIONS
Read the following information before viewing 3D television images.

CAUTION NOTICE:
1. Ambient fluorescent lighting may cause a flickering effect and direct sunlight
may adversely affect the operation of your 3D glasses.
2. DO NOT place your television near open stairwells, balconies or other objects as
viewing in 3D images may cause disorientation for some viewers resulting in falls,
tripping or walking into objects.
3. If you experience (1) altered vision; (2) lightheadedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of
awareness; (8) convulsions; (9) cramps; and/or (10) disorientation, immediately stop
watching 3D images and consult your doctor.
4. Parents should regularly monitor their children concerning the above symptoms
as children and teenagers may be more likely to experience these symptoms more
frequently than adults. Watching 3D television is not recommended for children
under the age of 6 as their visual system is not yet fully developed.
5. Prolonged viewing of 3D images might cause discomfort, dizziness, eye strain,
headaches or disorientation.

WARNING NOTICE:
1. Some viewers may experience an epileptic seizure or stroke when exposed to
certain flashing images or lights contained in certain television pictures or video
games. If you or any of your family has a history of epilepsy or stroke, please
consult your doctor before viewing 3D images.
2. DO NOT watch 3D television if you are pregnant, elderly, sleep-deprived, suffering
from serious medical conditions, in poor physical condition or under the influence
of alcohol.
3. Sitting too close to the screen for an extended period of time may damage your
eyesight. The ideal distance should be at least three times the height of the TV screen
and at the viewer's eyes level.
4. Wearing the 3D glasses for any reason other than viewing 3D television (as general
spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken
your eyesight.
5. If you experience any discomfort while viewing 3D images, stop and do not
immediately engage in any potentially hazardous activity such as driving a car
until your symptoms have disappeared. If your symptoms persist, do not resume
watching 3D images without consulting your doctor.

EN - 60

E5WA0UD_EN_v3.book

Page 61

Thursday, March 24, 2011

1:43 PM

EN

18. ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.

a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
1-866-309-0866

WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.

The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.

Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.

This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430

EN - 61

LICENSE
This section describes software license used for this product.
This product uses some open source software:
GPL software: linux, module-init-tools, mount, nettools, sash, Realtek WiFi driver
LGPL software: directfb, glibc, Qt, live555
BSD: WPA Supplicant
MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2
MIT/X: cURL
XML-RPC FOR C/C++ license: xmlrpc
gSOAP Public License: gSOAP
Free Type, LibJPEG, Open SSL, Vera Fonts
GPL
GNU General Public License (GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software
is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU
Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software
or use pieces of it in new free programs; and that you know you can do these
things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a
fee, you must give the recipients all the rights that you have. You must make sure
that they, too, receive or can get the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or modify
the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is
modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that redistributors of a free program will individually obtain patent
licenses, in effect making the program proprietary. To prevent this, we have made it
clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any
derivative work under copyright law: that is to say, a work containing the Program
or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running the Program is not restricted,
and the output from the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as
you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet
all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a
whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 1

must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions,
and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your
work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section
2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code,
which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third
party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the
source code for all modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation of the executable.
However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from
a designated place, then offering equivalent access to copy the source code from
the same place counts as distribution of the source code, even though third parties
are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated so long as
such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or
its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based
on the Program), you indicate your acceptance of this License to do so, and all its
terms and conditions for copying, distributing or modifying the Program or works
based on it.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties
to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or
for any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions
of this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute
the Program at all. For example, if a patent license would not permit royalty-free
redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be
to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide
if he or she is willing to distribute software through any other system and a licensee
cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries

2011/03/18 12:00:01

either by patents or by copyrighted interfaces, the original copyright holder who
places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a
version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of
software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to
the public, the best way to achieve this is to make it free software which everyone
can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to
the start of each source file to most effectively convey the exclusion of warranty;
and each file should have at least the "copyright" line and a pointer to where the
full notice is found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact
you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in
an interactive mode:
Gnomovision version 69, Copyright (C) year name of authorr Gnomovision comes
with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free
software, and you are welcome to redistribute it under certain conditions; type
`show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may be
called something other than `show w' and `show c'; they could even be mouseclicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school,
if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision'
(which makes passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more
useful to permit linking proprietary applications with the library. If this is what you
want to do, use the GNU Lesser General Public License instead of this License.
If you are interested in obtaining GPL source code used in this product, please
contact P&F USA, Inc.,
PO Box 430 Daleville, IN 47334-0430 U.S.A.

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 2

LGPL

GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor
of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software
is free for all its users.
This license, the Lesser General Public License, applies to some specially designated
software packages--typically libraries--of the Free Software Foundation and other
authors who decide to use it. You can use it too, but we suggest you first think
carefully about whether this license or the ordinary General Public License is the
better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price.
Our General Public Licenses are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the
software and use pieces of it in new free programs; and that you are informed that
you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to
deny you these rights or to ask you to surrender these rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the library or
if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you
must give the recipients all the rights that we gave you. You must make sure that
they, too, receive or can get the source code. If you link other code with the library,
you must provide complete object files to the recipients, so that they can relink
them with the library after making changes to the library and recompiling it. And
you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and
(2) we offer you this license, which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty
for the free library. Also, if the library is modified by someone else and passed on,
the recipients should know that what they have is not the original version, so that
the original author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users
of a free program by obtaining a restrictive license from a patent holder. Therefore,
we insist that any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU
General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General
Public License. We use this license for certain libraries in order to permit linking
those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library,
the combination of the two is legally speaking a combined work, a derivative of the
original library. The ordinary General Public License therefore permits such linking
only if the entire combination fits its criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less
to protect the user's freedom than the ordinary General Public License. It also
provides other free software developers Less of an advantage over competing nonfree programs. These disadvantages are the reason we use the ordinary General
Public License for many libraries. However, the Lesser license provides advantages
in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the
widest possible use of a certain library, so that it becomes a de-facto standard. To
achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries.
In this case, there is little to gain by limiting the free library to free software only, so
we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables
a greater number of people to use a large body of free software. For example,
permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/
Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has
the freedom and the wherewithal to run that program using a modified version of
the Library.
The precise terms and conditions for copying, distribution and modification follow.
Pay close attention to the difference between a "work based on the library" and
a "work that uses the library". The former contains code derived from the library,
whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which
contains a notice placed by the copyright holder or other authorized party saying
it may be distributed under the terms of this Lesser General Public License (also
called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to

2011/03/18 12:00:03

be conveniently linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been
distributed under these terms. A "work based on the Library" means either the
Library or any derivative work under copyright law: that is to say, a work containing
the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included
without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for
all modules it contains, plus any associated interface definition files, plus the scripts
used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running a program using the Library
is not restricted, and output from such a program is covered only if its contents
constitute a work based on the Library (independent of the use of the Library in
a tool for writing it). Whether that is true depends on what the Library does and
what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source
code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that refer to this License and to the
absence of any warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus
forming a work based on the Library, and copy and distribute such modifications
or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you
changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third
parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to
be supplied by an application program that uses the facility, other than as an
argument passed when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of its purpose remains
meaningful.
(For example, a function in a library to compute square roots has a purpose that
is entirely well-defined independent of the application. Therefore, Subsection 2d
requires that any application-supplied function or table used by this function must
be optional: if the application does not supply it, the square root function must
still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Library, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Library, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the
Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License
instead of this License to a given copy of the Library. To do this, you must alter
all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then
you can specify that version instead if you wish.) Do not make any other change
in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative
works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a
program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under
Section 2) in object code or executable form under the terms of Sections 1
and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place
satisfies the requirement to distribute the source code, even though third parties
are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is
designed to work with the Library by being compiled or linked with it, is called a
"work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library),
rather than a "work that uses the library". The executable is therefore covered by
this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part
of the Library, the object code for the work may be a derivative work of the

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 3

Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and
accessors, and small macros and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless of whether it is legally
a derivative work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object
code for the work under the terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also combine or link a "work
that uses the Library" with the Library to produce a work containing portions
of the Library, and distribute that work under terms of your choice, provided
that the terms permit modification of the work for the customer's own use and
reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is
used in it and that the Library and its use are covered by this License. You must
supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well
as a reference directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding machine-readable
source code for the Library including whatever changes were used in the work
(which must be distributed under Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the complete machine-readable "work
that uses the Library", as object code and/or source code, so that the user can
modify the Library and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who changes the contents
of definitions files in the Library will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable
mechanism is one that (1) uses at run time a copy of the library already present
on the user's computer system, rather than copying library functions into the
executable, and (2) will operate properly with a modified version of the library, if
the user installs one, as long as the modified version is interface-compatible with
the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give
the same user the materials specified in Subsection 6a, above, for a charge no
more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from
the same place.
e) Verify that the user has already received a copy of these materials or that you
have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must
include any data and utility programs needed for reproducing the executable from
it. However, as a special exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which
the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other
proprietary libraries that do not normally accompany the operating system. Such
a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side
in a single library together with other library facilities not covered by this License,
and distribute such a combined library, provided that the separate distribution
of the work based on the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on
the Library, uncombined with any other library facilities. This must be distributed
under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it
is a work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except
as expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based
on the Library), you indicate your acceptance of this License to do so, and all its
terms and conditions for copying, distributing or modifying the Library or works
based on it.
10. Each time you redistribute the Library (or any work based on the Library),
the recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise
of the rights granted herein. You are not responsible for enforcing compliance
by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your obligations

2011/03/18 12:00:03

under this License and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a patent license would
not permit royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the
Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system
which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system
in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the
Lesser General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the
option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Library does not specify
a license version number, you may choose any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to ask
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free
status of all derivatives of our free software and of promoting the sharing and
reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY
IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to
the public, we recommend making it free software that everyone can redistribute
and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion
of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.

Copyright (C)  
This library is free software; you can redistribute it and/or modify it under the
terms of the GNU Lesser General Public License as published by the Free
Software Foundation; either version 2.1 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with this library; if not, write to the Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school,
if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample;

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 4

alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a
library for tweaking knobs) written by James Random Hacker.
, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
If you are interested in obtaining LGPL source code used in this product, please
contact P&F USA, Inc.,
PO Box 430 Daleville, IN 47334-0430 U.S.A.
BSD
Copyright (c) 2003-2010, Jouni Malinen  and contributors All Rights
Reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of
its contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
MIT
-------------------------------------------• expat
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
-------------------------------------------• lua
Copyright © 1994 -2010 Lua.org, PUC-Rio.
-------------------------------------------• lua-xmlreader
Copyright © 2008 A.S. Bradbury
-------------------------------------------• lua-slncrypto
Copyright © 2005 Malete Partner, Berlin, partner@malete.org
-------------------------------------------• libxml2
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.
-------------------------------------------Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in the
Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
MIT/X
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, .
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with
or without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE

2011/03/18 12:00:04

SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be
used in advertising or otherwise to promote the sale, use or other dealings in this
Software without prior written authorization of the copyright holder.
gSOAP
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen,
Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA
INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Free Type
Portions of this software are copyright (c) 2001, 2002, 2003, 2004, 2006 The
FreeType Project (www.freetype.org). All rights reserved.
LibJPEG
This software is based in part on the work of the Independent JPEG Group.
Open SSL
LICENSE ISSUES
==========
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the
OpenSSL License and the original SSLeay license apply to the toolkit. See below
for the actual license texts. Actually both licenses are BSD-style Open Source
licenses. In case of any license issues related to OpenSSL please contact opensslcore@openssl.org.
OpenSSL License
---------------------/* ===============================================
* Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation and/
* or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must
* display the following acknowledgment: "This product includes software devel* oped by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.
* openssl.org/)"
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to en* dorse or promote products derived from this software without prior written
* permission. For written permission, please contact openssl-core@openssl.org.
* 5. Products derived from this software may not be called "OpenSSL" nor may
* "OpenSSL" appear in their names without prior written permission of the
* OpenSSL Project.
* 6. Redistributions of any form whatsoever must retain the following acknowledg* ment: "This product includes software developed by the OpenSSL Project for
* use in the OpenSSL Toolkit (http://www.openssl.org/)"
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND
* ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM* ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUEN* TIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
* ===============================================
* This product includes cryptographic software written by Eric Young (eay@
* cryptsoft.com). This product includes software written by Tim Hudson (tjh@
* cryptsoft.com).
*
*/
Original SSLeay License
----------------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
* This package is an SSL implementation written by Eric Young (eay@cryptsoft.
* com).
* The implementation was written so as to conform with Netscapes SSL.

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 5

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/

This library is free for commercial and non-commercial use as long as the
following conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by
the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.
com).
Copyright remains Eric Young's, and as such any Copyright notices in the code
are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the
author of the parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement: "This product includes cryptographic
software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the
apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and
put under another distribution licence
[including the GNU Public Licence.]

Vera Fonts
Copyright
Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of the
fonts accompanying this license (“Fonts”) and associated documentation files (the
“Font Software”), to reproduce and distribute the Font Software, including without
limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the
Font Software, and to permit persons to whom the Font Software is furnished to
do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be
included in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the
designs of glyphs or characters in the Fonts may be modified and additional glyphs
or characters may be added to the Fonts, only if the fonts are renamed to names
not containing either the words “Bitstream” or the word “Vera”.
This License becomes null and void to the extent applicable to Fonts or Font Software that has been modified and is distributed under the “Bitstream Vera” names.
The Font Software may be sold as part of a larger software package but no copy of
one or more of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR
OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT
SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the names of Gnome, the Gnome Foundation,
and Bitstream Inc., shall not be used in advertising or otherwise to promote the
sale, use or other dealings in this Font Software without prior written authorization
from the Gnome Foundation or Bitstream Inc., respectively. For further information,
contact: fonts at gnome dot org.
xmlprc
XML-RPC For C/C++ License
------------------------Copyright (C) 2001 by First Peer, Inc. All rights reserved.
Copyright (C) 2001 by Eric Kidd. All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

2011/03/18 12:00:04

1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 6

2011/03/18 12:00:04

E5WA0UD_EN_v3.book

Page 62

Thursday, March 24, 2011

1:43 PM

P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México
C.P. 52787
Meet Philips at the Internet
http://www.philips.com/support

ENERGIA
BDP5506

120 V ~ 60 Hz 20 W

Comercializado por :

P&F Mexicana, S.A. DE C.V.

IMPORTADOR:

Sojitz Mexicana, S.A. de C.V.
Av. Paseo de las Palmas no. 239-302
Col. Lomas de Chapultepec, c.p. 11000
México, D.F.
52 (55) 5202 - 7222

EXPORTADOR :

FUNAI ELECTRIC CO. L.T.D.

País de Origen :

CHINA

GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.

Philips and Philips Shield are used under
license of Koninklijke Philips Electronics N.V.

★★★
E5WA0UD



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : hashimoto
Create Date                     : 2011:03:24 13:43:43Z
Modify Date                     : 2011:04:07 15:45:42+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : E5WA0UD_EN_v3.book
Creator                         : hashimoto
Creator Tool                    : FrameMaker 8.0
Metadata Date                   : 2011:04:07 15:45:42+09:00
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Document ID                     : uuid:1636a863-33e8-45a8-a904-8a1a2b0a6e91
Instance ID                     : uuid:ce816241-8358-428a-a3cf-46479752e8d5
Page Mode                       : UseOutlines
Page Count                      : 68
EXIF Metadata provided by EXIF.tools

Navigation menu