Philips Bdp5506 F7 Owner S Manual E5WA0UD_EN_v3

Philips-Bdp5506-F8-Users-Manual-378972 philips-bdp5506-f8-users-manual-378972

E5WA0UD_EN_v3 bdp5506_f7_dfu_aen

BDP5506/F7 Mode d’emploi bdp5506_f7_dfu_aen Lecteur de disques Blu-ray BDP5506/F7 | PhilipsBDP5506/F7

BDP5506F8 to the manual ee733700-05ee-4f6b-9cb5-1dd5aa49a0b4

2014-12-13

: Philips Philips-Bdp5506-F7-Owner-S-Manual philips-bdp5506-f7-owner-s-manual philips pdf

Open the PDF directly: View PDF PDF.
Page Count: 68

FR Manuel d’Utilisation
EN User Manual
ES Manual del Usuario
EN: For further assistance, call the customer support service in your country.
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips
Customer Care Center at 1-866-309-0866
•
•
•
•
•
•
To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0866
Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo
Para México.
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0866
Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00
Lea este manual antes de usar el product.
Register your product and get support at
www.philips.com/support BDP5506/F7
BDP5506/F8
E5WA0UD_EN_v3.book Page 1 Thursday, March 24, 2011 1:43 PM
EN - 2
1. INTRODUCTION
1.1. Safety Instructions
Registering your model with Philips makes you eligible for all of the valuable benefits listed below,
so don't miss out. Complete and return your Product Registration Card at once, or register online at
www.philips.com/support to ensure:
Return your Product Registration Card or register online at
www.philips.com/support today to get the very most from your purchase.
Know these
safety
symbols
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
By registering your product, you'll receive notification
- directly from the manufacturer - in the rare case of
a product recall or safety defect.
*Product Safety Notification *Additional Benefits
Registering your product guarantees that you’ll
receive all of the privileges to which you're entitled,
including special money-saving offers.
Congratulations on your purchase,
and welcome to the “family!”
Dear Philips product owner:
Thank you for your confidence in Philips.
You’ve selected one of the best-built, best-
backed products available today. We’ll do
everything in our power to keep you happy
with your purchase for many years to come.
As a member of the Philips “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding
service networks in the industry. What’s more,
your purchase guarantees you’ll receive all the
information and special offers for which you
qualify, plus easy access to accessories from
our convenient home shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a Philips product.
P.S. To get the most from your
Philips purchase, be sure to
complete and return your Product
Registration Card at once, or register
online at:
www.philips.com/support
For Customer Use
Please write the model and serial number of your unit
(located on the cabinet) in the space below for future
reference.
Model No. __________________________________
Serial No. __________________________________
Visit our World Wide Web Site at http://www.philips.com/support
The symbol for CLASS ll (Double Insulation)
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For
the safety of everyone in your household, please do
not remove product covering.
The “exclamation point” calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.
WARNING:
To reduce the risk of fire or electric
shock, this apparatus should not be exposed to rain or
moisture, and objects filled with liquids, such as vases,
should not be placed on this apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
Pour éviter les chocs électriques, introduire
la lame la plus large de la fiche dans la borne correspondante
de correspondante de la prise et pousser jusqu’au fond.
The important note and rating are located on the
rear or bottom of the cabinet.
E5WA0UD_EN_v3.book Page 2 Thursday, March 24, 2011 1:43 PM
EN
EN - 3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized
change or modification is made.
This transmitter must be co-located or operated in
conjunction with any other antenna or transmitter.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Disconnect the mains plug to shut off when find
trouble or not in use. The mains plug shall remain
readily operable.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type.
WARNING:
Batteries (Battery pack or battery
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service
person should remove the cover or attempt to service
this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
E5WA0UD_EN_v3.book Page 3 Thursday, March 24, 2011 1:43 PM
EN - 4
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting
it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or strong
vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do
not place anything directly on top or bottom of the
unit. Depending on your external devices, noise or
disturbance in the picture and/or sound may be
generated if the unit is placed too close to them. In this
case, please ensure enough space between the external
devices and the unit.
• Depending on the environment, the temperature of this
unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power
cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at least
for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Notice for Progressive Scan Output
• Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture. In
case of picture problems with 525(480) progressive
scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with
this 525p(480p) Blu-ray Disc™/DVD player, please
contact our customer service center.
1.2. Maintenance
䡲Servicing
• Please refer to relevant topics on
“TROUBLESHOOTING” on page 51 before returning
the product.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you. For online
reference, please visit our website at
www.philips.com/support
䡲Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.
䡲Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to outside. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Do not place the unit on the furniture that is capable of
being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
even death.
This apparatus should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided. Make sure to leave a space of 3.9
inches (10cm) or more around this apparatus.
ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency
and the U.S. Department of Energy
helping us all save money and protect the
environment through energy efficient
products and practices.
E5WA0UD_EN_v3.book Page 4 Thursday, March 24, 2011 1:43 PM
EN
EN - 5
䡲Cleaning the Disc Lens
• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this user manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
䡲Disc Handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage
the unit.
䡲Testing the Remote Control
• If the remote control is not working properly, you can
use a digital camera (including a cellular phone with
built-in camera) to see if it is sending out an infrared
signal.
How to perform the test?
1.3. Notice
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners. P&F USA
reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the
intended use of the system. If the product, or its individual
modules or procedures, are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents.
No further warranty is expressed or implied. P&F USA
cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result
of the content in this document. Errors reported to P&F
USA will be adapted and published on the P&F USA support
website as soon as possible.
䡲Warranty
No components are user serviceable. Do not open or
remove covers to the inside of the product. Repairs may
only be done by Service Centers and official repair shops.
Failure to do so shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any
adjustments, or assembly procedures not recommended or
authorized in this manual shall void the warranty.
1.4. Important
Registering your model with Philips makes you eligible for
all of the valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at
once, or register online at www.philips.com/support to
ensure :
Product Safety Notification
By registering your product you receive notification
- directly from the manufacturer - in the rare case of a
product recall or safety defect.
Additional Benefits of Product Ownership
Registering your product guarantees that you receive all of
the privileges to which you’re entitled, including special
money-saving offers.
For further assistance
For further assistance, call the customer support service in
your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico,
or the U.S. Virgin Islands, contact Philips Customer
Care Center at 1-866-309-0866
1. Point the IR transmitter of the
remote control towards the lens of
the digital camera (or cell phone
camera).
2. Turn on the digital camera and
look at the IR transmitter of the
remote control through the LCD
display of the digital camera.
3. While looking at the LCD, press
the buttons on your remote
control you want to test.
a. If your remote control is
working properly, the IR
transmitter of the remote
control will create a noticeable
flash on the LCD of the digital
camera.
b. If it does not flash, replace the
batteries in your remote with
new batteries and try again. If it
still does not flash, your
remote control may be
damaged or defective. Please
contact customer service for
replacement options.
E5WA0UD_EN_v3.book Page 5 Thursday, March 24, 2011 1:43 PM
EN - 6
䡲Environmental Care
End of life directives
Disposal of used batteries
The batteries supplied do not contain the heavy metals
mercury and cadmium. Nevertheless, in many areas
batteries may not be disposed of with your household
waste. Please ensure you dispose of batteries according to
local regulations.
1.5. Supplied Accessories
• Remote Control
• Batteries (AAA, 1.5V x 2)
• User Manual
• Quick Start Guide
•Registration card
•Box-inserts
• Audio / video cables
1.6. Trademark Information
The packaging of this product is
intended to be recycled.
Contact your local authorities
for information about how to
recycle the packaging.
For Product recycling
information, please visit -
www.recycle.philips.com
Philips pays a lot of attention to
produce environment-friendly
products in green focal areas.
Your new Blu-ray Disc™ Player
contains materials which can be
recycled and reused. At the end
of its life, specialized companies
can dismantle the discarded
Blu-ray Disc™ Player to
concentrate the reusable
materials and to minimize the
amount of materials to be
disposed of. Please ensure you
dispose of your old Blu-ray
Disc™ Player according to local
regulations.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS logos are
trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.
Java and all Java based trademarks and logos are
trademarks or registered trademarks of Oracle and/or its
affiliates.
E5WA0UD_EN_v3.book Page 6 Thursday, March 24, 2011 1:43 PM
EN
EN - 7
is a trademark of DVD Format/Logo Licensing
Corporation.
Windows Media and the Windows logo are trademarks
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
“BONUSVIEW™” and “BONUSVIEW™” logo are
trademarks of the Blu-ray Disc Association.
“BD-Live™” and “BD-Live™” logo are trademarks of the
Blu-ray Disc Association.
Netflix and the Netflix logo are trademarks or registered
trademarks of Netflix, Inc.
Film Fresh and the Film Fresh logo are registered
trademarks of Film Fresh Inc.
BLOCKBUSTER name, design and related marks are
trademarks of Blockbuster Inc.
VUDU™ is a trademark of VUDU, Inc.
Pandora is a registered trademark of Pandora Media, Inc.
“Blu-ray 3D™” and “Blu-ray 3D™” logo are trademarks
of the Blu-ray Disc Association.
“Blu-ray Disc™”, “Blu-ray™” and “Blu-ray Disc™” logo
are trademarks of the Blu-ray Disc Association.
Kodak and KODAK Picture CD Compatible are
trademarks of Kodak used under license.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
E5WA0UD_EN_v3.book Page 7 Thursday, March 24, 2011 1:43 PM
EN - 8
CONTENTS
INTRODUCTION.......................................................... 2
Safety Instructions............................................................. 2
Maintenance ....................................................................... 4
Notice.................................................................................. 5
Important............................................................................ 5
Supplied Accessories........................................................ 6
Trademark Information ................................................... 6
FEATURES ........................................................................ 9
Features............................................................................... 9
Version Info...................................................................... 10
Symbols Used in this User Manual.............................. 10
FUNCTIONAL OVERVIEW...................................... 11
Front Panel ....................................................................... 11
Rear Panel......................................................................... 11
Remote Control.............................................................. 12
Display Panel .................................................................... 14
Guide to On-Screen Display........................................ 14
CONNECTIONS......................................................... 15
HDMI Video / Audio Connection............................... 15
Standard Video + Standard Audio Connection ....... 15
Connection to an Audio System ................................. 16
Connection to the Network........................................ 20
BEFORE YOU START ................................................ 22
Finding the Viewing Channel / Source on
Your TV ............................................................................ 22
Initial Setup....................................................................... 22
INFORMATION ON PLAYBACK........................... 23
Information on Playback................................................ 23
Guide to File List............................................................. 25
How to Insert a Disc ..................................................... 26
BASIC PLAYBACK ...................................................... 26
Playing Back a Disc ......................................................... 26
Playing Back a Blu-ray 3D™ Disc................................ 28
Playing Back Contents on a USB Storage Device.... 29
Using the Title / Disc / Pop-up Menu......................... 29
SPECIAL PLAYBACK................................................... 30
Fast Forward / Fast Reverse ........................................ 30
Slow Forward Playback ................................................. 30
Step by Step Playback .................................................... 30
Repeat Playback .............................................................. 30
Slide Show ........................................................................ 31
PiP (BONUSVIEW™) Setting...................................... 31
Enjoying BD-Live™ Discs Using the Internet.......... 31
Title / Chapter Search................................................... 32
Track Search.................................................................... 33
Time Search ..................................................................... 33
Switching Subtitles.......................................................... 33
Switching Audio Soundtrack ........................................ 34
Switching Camera Angles ............................................. 34
Black Level........................................................................ 35
Noise Reduction............................................................. 35
Virtual Surround ............................................................. 35
Philips Wireless MediaConnect .................................. 36
NETWORK SERVICES................................................ 37
Before Using Network Services.................................. 37
Information on Network Services.............................. 37
PANDORA OPERATIONS........................................ 37
Activating Pandora ......................................................... 37
Adding Pandora User Accounts.................................. 37
Creating a New Station................................................. 38
Guide to the Player Screen .......................................... 38
LIST OF SETTINGS...................................................... 39
SETUPS............................................................................ 42
TV Display........................................................................ 42
HDMI Video..................................................................... 42
Network Installation...................................................... 43
EasyLink Setup................................................................. 48
Parental Control............................................................. 48
Software Update............................................................. 49
Restore Default Settings............................................... 50
TROUBLESHOOTING ............................................... 51
Downloading an Electronic Copy............................... 54
Contact Us....................................................................... 54
GLOSSARY .................................................................... 55
LANGUAGE CODE LIST........................................... 58
SPECIFICATIONS ........................................................ 59
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D TELEVISIONS............... 60
ONE (1) YEAR LIMITED WARRANTY.................. 61
LICENSE......................................................... end of book
E5WA0UD_EN_v3.book Page 8 Thursday, March 24, 2011 1:43 PM
EN
EN - 9
2. FEATURES
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register
your product at www.philips.com/support
2.1. Features
Blu-ray Disc™
You can enjoy Blu-ray Disc™ which is capable of storing
five times more data than a conventional DVD.
Playing back Blu-ray 3D™ Disc
This unit can play back Blu-ray 3D™ discs which contain
stereoscopic 3D video. In order to enjoy 3D video,
connect this unit to a 3D capable TV using a 3D compatible
HDMI cable.
BD-Java
With some Blu-ray™ discs which contain Java applications,
you can enjoy interactive functions such as games or
interactive menus.
DVD upscaling for enhanced picture quality
Your current DVD will look even better than before thanks
to video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p
over an HDMI connection. The picture will be less jagged
and more realistic for a near high definition experience.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and USB
storage device ensures that you can continue to enjoy your
current audio-video collection. Additionally, you can enjoy
AVCHD / MP3 / WMA / JPEG files.
Listen to rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Intuitive user interface and remote control
The Philips logical user interface allows you to easily
navigate through your content and settings, so you can
quickly find what you are looking for.
Easy and simple connection to your HDTV via
HDMI
Connect your BDP5506 to your HDTV with one single
HDMI (High-Definition Multimedia Interface) cable. Philips
recommends High Speed HDMI cable for better
compatibility. The high definition video output signal will be
transferred to your HDTV without conversion to analog
signals, so you will get excellent picture and sound quality,
completely free from noise. Thanks to other multiple
outputs, you can also easily connect to your home theater
system or amplifier.
About EasyLink (HDMI CEC) (Consumer
Electronics Control)
EasyLink allows you to operate the linked functions of this
player with Philips brand TV with EasyLink feature.
Philips does not guarantee 100 % interoperability with other brands
of HDMI CEC compliant devices.
PiP (BONUSVIEW™)
Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing
[BONUSVIEW (PiP)] whenever the scene contains a
secondary video.
BD-Live™
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows
interactive functions to be used when this unit is connected
to the Internet in addition to the BONUSVIEW™ function.
The various functions differ depending on the disc.
Pop-up menu
Some BD-videos have a pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting playback. You can call up the pop-up
menu by pressing
[DISC MENU / POP-UP MENU]
.
Contents in the pop-up menu vary depending on the disc.
HDMI Deep Color
Deep Color reduces posterization (color banding) effect of
the playback image. Refer to “HDMI Deep Color” on page 39.
HDMI 1080p/24 output (Blu-ray Disc™ only)
This unit is equipped with the feature which can provide
smooth movement during playback of film originated
material with the frame rate of 24 frames per second with
progressive. (Available only when the display device is
connected by an HDMI cable.) Refer to “HDMI Video” on
page 42.
E5WA0UD_EN_v3.book Page 9 Thursday, March 24, 2011 1:43 PM
EN - 10
Playing back contents on a USB storage device
You can play back MP3 / WMA / JPEG files stored in a USB
storage device. BD-ROM Profile 2.0 (BD-Live™) and
Profile 1.1 discs sometimes store picture-in-picture
commentary, subtitles or other extras in the USB storage
device for use during playback with the BD-video.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
disc. Your high definition personal archive is playable in HD
quality.
x.v.Color
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color” space, a TV or other display
device supporting both video image reproduction using
“x.v.Color” standard and capability of manual switching of
its color space setting is required. Please refer to the user
manual of your display device for further information.
Netflix
With this unit, you can enjoy movies and TV episodes
streamed instantly from Netflix via the Internet. In order to
use this feature, you must visit netflix.com/Philips on your
PC and become a Netflix member.
(This feature is available only in the United States.)
Film Fresh / Blockbuster
With this unit, you can enjoy movies and TV episodes
streamed instantly from Film Fresh / Blockbuster via the
Internet. In order to use this feature, you must visit
following website on your PC and become a Film Fresh /
Blockbuster member. (This feature is available only in the
United States.)
- Film Fresh : filmfresh.roxionow.com/Login
- Blockbuster : www.blockbuster.com/auth/login
VUDU
This unit supports VUDU which is the leading HD on-
demand video service. With VUDU, you can also enjoy
various kinds of Internet applications. In order to use this
feature, you must connect this unit to the Internet.
For complete instructions on using VUDU service, please
visit www.vudu.com/docs to view an updated in-depth
online manual.
(This feature is available only in the United States.)
Pandora
This unit supports Pandora Internet radio service. You can
instantly listen to personalized radio stations streamed over
the Internet from Pandora.
(This feature is available only in the United States.)
2.2. Version Info
“Version Info” screen provides information about this unit’s
software version.
You can also download the latest software from the Philips
website and update it yourself if it is newer than the version
currently on your unit. The current version of software on
your unit can be seen on the “Version Info” screen.
To access “Version Info”, follow the procedure below.
1. Press [(home)].
2. Use [K/L/s/B] to select “Setup”, then press
[OK].
3. Use [K/L] to select “Advanced Setup”, then press
[OK].
4. Use [K/L] to select “Version Info”, then press [OK].
2.3. Symbols Used in this User Manual
To specify which media type each function is applicable to,
we put the following symbols at the beginning of each item
to operate.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Symbol Description
Description refers to BD-video
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to DVD-RW/-R with
AVCHD files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with MP3
files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with
Windows Media™ Audio files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and USB storage device with JPEG
files
E5WA0UD_EN_v3.book Page 10 Thursday, March 24, 2011 1:43 PM
EN
EN - 11
3. FUNCTIONAL OVERVIEW
3.1. Front Panel
1. Q(standby/on) button
• Touch to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Touch and hold for 10 seconds to shut down the
unit.
2. B(play) button
• Touch to start or resume playback.
3. C(stop) button
• Touch to stop playback.
4. A(open/close) button
• Touch to open or close the disc tray.
5. Disc tray
• Place a disc after opening the disc tray.
6. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
7. Display panel
• Refer to “Display Panel” on page 14.
8. USB input
• Connect a USB storage device or USB card reader.
CCaution
• Do not connect any device other than USB storage
device or USB card reader into USB input. (e.g. PC,
external HDD, MP3 player, digital camera, keyboard,
mouse, etc.)
• Do not use an extension cord or USB hub to connect
devices to this unit. Always connect one single USB
storage device or USB card reader into USB input
directly.
DNote
• Due to new ENERGY STAR® requirements, this unit
will automatically enter standby mode after 25 minutes
of inactivity.
3.2. Rear Panel
1. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
2. LAN terminal
• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
3. DIGITAL OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier,
Dolby Digital / DTS decoder or to another device
with a digital audio coaxial input jack with a digital
audio coaxial cable.
4. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
5. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with a video cable.
6. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with an audio cable.
CCaution
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have an RF modulator.
2
14 5 8
6 7
3
1
3
2
56
4
E5WA0UD_EN_v3.book Page 11 Thursday, March 24, 2011 1:43 PM
EN - 12
3.3. Remote Control
* The unit can also be turned on by pressing these
buttons.
1. Q(standby/on) button
• Press to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2. BONUSVIEW (PiP) button
• Press to switch picture in picture feature on/off (only
applicable to BD-video which supports the PiP
(BONUSVIEW™) function).
3. OPTION button
• During playback, press to display the play menu.
4. Red / Green / Blue / Yellow buttons
• Press to activate shortcut keys on some BD-video
functions.
• When file list is shown, press to switch between
pages.
5. (home) button
• Press to display the home menu.
6. DISC MENU / POP-UP MENU button
Blu-ray Disc™:
• Press to display the pop-up menu.
DVD:
• Press to display the disc menu.
7. K/L/s/B buttons
• Press to select items or settings.
8. OK button
• Press to confirm or select menu items.
9. BACK U button
• Press to return to the previously displayed menu or
screen function.
10. B(play) button*
• Press to start playback or resume playback.
11. S(previous) button
• During playback, press once to return to the
beginning of the current title, chapter, track or file.
• During playback, press twice to return to the
previous title, chapter, track or file.
• During the JPEG playback, press to return to the
previous file.
12. E(reverse) button
• During playback, press to fast reverse the playback.
13. C(stop) button
• Press to stop playback.
14. TV VOL ⴐ / ⴑ button
• Press to adjust the TV volume (only applicable to the
Philips brand TV).
15. A(open/close) button*
• Press to open or close the disc tray.
16. Number buttons
• Press to select a chapter during playback.
• Press to enter numbers and letters in the input field.
17. SUBTITLE button
• Press to select subtitles on a disc.
18. ANGLE button
• Press to select camera angles on a disc.
19. HDMI button
• Press to set the HDMI output mode.
20. AUDIO button
• Press to select the audio channel (such as audio
languages) on a disc.
1
2
5
6
7
9
11
10*
12
13
14
16
17
18
4
3
8
15*
29
28
27
26
24
21
20
19
23
22
25
E5WA0UD_EN_v3.book Page 12 Thursday, March 24, 2011 1:43 PM
EN
EN - 13
21. TV CH ⴐ / ⴑ button
• Press to change the channel up and down (only
applicable to the Philips brand TV).
22. d(mute) button
• Press to mute the TV volume (only applicable to the
Philips brand TV).
23. D(forward) button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the
playback.
24. T(next) button
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause mode, press to forward
the playback picture by picture.
25. F(pause) button
• Press to pause playback.
26. Net-TV button
• Press to display the network media mode menu.
27. TOP MENU button
Blu-ray Disc™:
• Press to display the top menu.
DVD:
• Press to display the title menu.
28. INFO button
• Press to display the information display.
29. REPEAT button
• Press to select repeat mode.
䡲Installing the Batteries in the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity
indicated inside battery compartment of the remote
control.
CCaution
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries may
have different voltages.
• Make sure that the + and - ends of each battery match
the indications in the battery compartment.
• Remove batteries from battery compartment, when the
remote is not going to be used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public rules
that apply in your country or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
䡲Using the Remote Control
Remote Control Usage Guidelines:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote controls of different devices can interfere with
each other. Avoid using a remote control from another
device which is located close to the unit.
• Replace the batteries when you notice a fall-off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
- Above:
approx. 16 feet (5 m) within 15°
- Below:
approx. 10 feet (3 m) within 30°
30˚ 30˚
16 feet (5 m) 23 feet (7 m) 16 feet (5 m)
E5WA0UD_EN_v3.book Page 13 Thursday, March 24, 2011 1:43 PM
EN - 14
3.4. Display Panel
Display panel shows playback status or information (e.g.
elapsed playing time, repeat type, menu type, etc. ).
* Brightness of the display can be adjusted. Refer to
“Display Panel” in “LIST OF SETTINGS” on page 41.
e.g.)
3.5. Guide to On-Screen Display
䡲Home Menu
When you turn on the unit, home menu will appear
automatically. Otherwise, press [(home)].
䡲Setup Menu
1. Category
2. Menus / Options :
Displays options for the highlighted item on the left
whenever available
䡲Play Menu
During playback, press [OPTION] to display the play
menu.
e.g.) Blu-ray Disc™
Indicating the elapsed time of
playback.
Current chapter is in chapter
repeat mode during playback of
disc.
Loading a disc, USB storage device
or USB card reader.
Home menu is displayed.
Network media mode menu is
displayed.
“Play Disc” : Initiates playback of inserted disc,
displays a list of tracks / files or the
media filter menu
“Browse USB” : Displays a list of tracks / files on
the connected USB storage device
or the media filter menu
“Browse Net TV” : To access the menu of network
services
“MediaConnect” : To access the Philips Wireless
MediaConnect menu
“Setup” : To access setup menu
Setup
Browse Net TVPlay Disc Browse USB
MediaConnect
2
1
Advanced Setup
Video Setup
Audio Setup
Network Setup
EasyLink Setup
Preference Setup
TV Display
HDMI Video
HDMI Deep Color
De-interlacing Mode
16:9 Widescreen
Auto
Auto
Auto
3D Output Auto (3D)
Search
Audio
Subtitle
Repeat
Black Level
Noise Reduction
E5WA0UD_EN_v3.book Page 14 Thursday, March 24, 2011 1:43 PM
EN
EN - 15
4. CONNECTIONS
4.1. HDMI Video / Audio Connection
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)
No analog audio connection required.
(*1) 1080i : Outputs video data with a frame rate of 30 frames per second.
(*2) 1080p : Outputs video data with a frame rate of 60 frames per second.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector
are matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also
known as HDMI category 2 cable) is recommended for better compatibility.
• To enjoy Blu-ray 3D™ video, connect this unit to a 3D capable TV using a 3D compatible HDMI cable.
4.2. Standard Video + Standard Audio Connection
(Supports only 480i resolution.)
• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR then the pictures may be
distorted due to the copyright protection system.
HDMI IN
HDMI OUT
HDMI cable
(not supplied)
Your TV
AUDIO IN
R
L
L
R
AUDIO
OUT
VIDEO
OUT
VIDEO IN
Your TV
Video cable (supplied)
Audio cable (supplied)
E5WA0UD_EN_v3.book Page 15 Thursday, March 24, 2011 1:43 PM
EN - 16
4.3. Connection to an Audio System
• When you change the connections, all devices should be turned off.
• When making connections with external devices, please refer to their user manuals for additional setup help.
䡲HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
L
R
AUDIO
OUT
COAXIAL
DIGITAL OUT
PCM / BITSTREAM
AUDIO IN
LR
COAXIAL
DIGITAL AUDIO INPUT
Audio cable
(supplied)
Stereo system with
analog audio input jacks
Digital audio coaxial cable
(not supplied)
AV receiver / amplifier with a
digital audio coaxial input jack
䡲Digital Audio Connection䡲2-Channel Analog Audio Connection
HDMI OUT
HDMI IN
HDMI cable
(not supplied)
E5WA0UD_EN_v3.book Page 16 Thursday, March 24, 2011 1:43 PM
EN
EN - 17
䡲Audio Output from AUDIO OUT jacks
*1) Fully decoded.
*2) Only the independent substream is decoded.
*3) Dolby TrueHD stream is decoded.
*4) Only the Dolby Digital substream is decoded.
*5) Only the core substream is decoded.
“Blu-ray Disc Audio” setting A “Primary Audio Only” “Mix Audio Output”
Media
Audio Source
BD-video
Dolby Digital DownMix 2ch LPCM DownMix 2ch LPCM
Dolby Digital Plus DownMix 2ch LPCM*1 DownMix 2ch LPCM*2
Dolby TrueHD DownMix 2ch LPCM*3 DownMix 2ch LPCM*4
DTS®DownMix 2ch LPCM DownMix 2ch LPCM
DTS-HD®DownMix 2ch LPCM*1 DownMix 2ch LPCM*5
LPCM DownMix 2ch LPCM DownMix 2ch LPCM
DVD-video
Dolby Digital DownMix 2ch LPCM
DTS®DownMix 2ch LPCM
LPCM 2ch LPCM
DTS-CD DTS®DownMix 2ch LPCM
AVCHD Dolby Digital DownMix 2ch LPCM
LPCM DownMix 2ch LPCM
Audio CD LPCM 2ch LPCM
MP3 MP3 2ch LPCM
Windows Media™ Audio WMA 2ch LPCM
Netflix WMA 2ch LPCM
Film Fresh AAC 2ch LPCM
Blockbuster AAC 2ch LPCM
VUDU Dolby Digital Plus DownMix 2ch LPCM*1
MP3 2ch LPCM
Pandora MP3 2ch LPCM
E5WA0UD_EN_v3.book Page 17 Thursday, March 24, 2011 1:43 PM
EN - 18
䡲Audio Output from DIGITAL OUT (COAXIAL) jack
*1) Fully decoded.
*2) Only the independent substream is decoded.
*3) Dolby TrueHD stream is decoded.
*4) Only the Dolby Digital substream is decoded.
*5) Only the core substream is decoded.
DNote
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.
• If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the
connected device.
“Digital Audio”
setting A “Bitstream” “LPCM”
“Blu-ray Disc Audio”
setting A
“Primary Audio
Only”
“Mix Audio
Output” “Primary Audio Only” “Mix Audio Output”
Media
Audio Source
BD-video
Dolby Digital Dolby Digital DownMix 2ch LPCM
Dolby Digital Plus Dolby Digital DownMix 2ch LPCM*1 DownMix 2ch LPCM*2
Dolby TrueHD Dolby Digital DownMix 2ch LPCM*3 DownMix 2ch LPCM*4
DTS®DTS®DownMix 2ch LPCM
DTS-HD®DTS®DownMix 2ch LPCM*1 DownMix 2ch LPCM*5
LPCM DownMix 2ch LPCM DownMix 2ch LPCM
DVD-video
Dolby Digital Dolby Digital DownMix 2ch LPCM
DTS®DTS®DownMix 2ch LPCM
LPCM 2ch LPCM 2ch LPCM
DTS-CD DTS®DTS®DownMix 2ch LPCM
AVCHD Dolby Digital Dolby Digital DownMix 2ch LPCM
LPCM DownMix 2ch LPCM DownMix 2ch LPCM
Audio CD LPCM 2ch LPCM 2ch LPCM
MP3 MP3 2ch LPCM 2ch LPCM
Windows Media™ Audio WMA 2ch LPCM 2ch LPCM
Netflix WMA 2ch LPCM 2ch LPCM
Film Fresh AAC 2ch AAC 2ch LPCM
Blockbuster AAC 2ch AAC 2ch LPCM
VUDU Dolby Digital Plus Dolby Digital DownMix 2ch LPCM*1
MP3 2ch LPCM 2ch LPCM
Pandora MP3 2ch LPCM 2ch LPCM
E5WA0UD_EN_v3.book Page 18 Thursday, March 24, 2011 1:43 PM
EN
EN - 19
䡲Audio Output from HDMI OUT jack
*1) Fully decoded.
*2) Only the independent substream is decoded.
*3) Dolby TrueHD stream is decoded.
*4) Only the Dolby Digital substream is decoded.
*5) Only the core substream is decoded.
DNote
• If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI
Audio” setting.
• If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the
connected device.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.
“HDMI Audio”
setting A “Bitstream” “LPCM” “Off”
“Blu-ray Disc Audio”
setting A
“Primary Audio
Only”
“Mix Audio
Output”
“Primary Audio
Only”
“Mix Audio
Output” Regardless
Media
Audio Source
Which audio format can be output depends on the compatibility of the connected
device.
BD-video
Dolby Digital Dolby Digital Multi LPCM Mute
Dolby Digital Plus Dolby Digital Plus Dolby Digital Multi LPCM*1 Multi LPCM*2 Mute
Dolby TrueHD Dolby TrueHD Dolby Digital Multi LPCM*3 Multi LPCM*4 Mute
DTS®DTS®Multi LPCM Mute
DTS-HD®DTS-HD®DTS®Multi LPCM*1 Multi LPCM*5 Mute
LPCM Multi LPCM Multi LPCM Mute
DVD-video
Dolby Digital Dolby Digital Multi LPCM Mute
DTS®DTS®Multi LPCM Mute
LPCM 2ch LPCM 2ch LPCM Mute
DTS-CD DTS®DTS®Multi LPCM Mute
AVCHD Dolby Digital Dolby Digital Multi LPCM Mute
LPCM Multi LPCM Multi LPCM Mute
Audio CD LPCM 2ch LPCM 2ch LPCM Mute
MP3 MP3 2ch LPCM 2ch LPCM Mute
Windows Media™ Audio WMA 2ch LPCM 2ch LPCM Mute
Netflix WMA 2ch LPCM 2ch LPCM Mute
Film Fresh AAC 2ch AAC 2ch LPCM Mute
Blockbuster AAC 2ch AAC 2ch LPCM Mute
VUDU Dolby Digital Plus Dolby Digital Plus Multi LPCM*1 Mute
MP3 2ch LPCM 2ch LPCM Mute
Pandora MP3 2ch LPCM 2ch LPCM Mute
E5WA0UD_EN_v3.book Page 19 Thursday, March 24, 2011 1:43 PM
EN - 20
4.4. Connection to the Network
By connecting this unit to the Internet, you can update the software via the Internet or access BD-Live™, Netflix, Film
Fresh, Blockbuster, VUDU and Pandora services.
DNote
• For a stable connection, wired connection is recommended when using following features. (Using following features
with Wi-Fi connection can be affected by other devices using radio frequencies.)
- Video streaming services (Netflix / Film Fresh / Blockbuster / VUDU)
- Listening to Internet radio (Pandora)
- Network update
䡲Wired Connection
CCaution
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• Do not connect your PC directly to the LAN terminal of this unit.
DNote
• After you make a wired connection, set up necessary network settings.
(For network setting of wired connection, refer to “Wired” on page 44.)
• If your modem does not have router functions, connect a wired router.
• If your modem has router functions but there is no vacant port, add a hub.
• For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.
• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.
LAN
WAN LAN
12345
LAN
Internet
LAN cable (not supplied)
LAN cable (not supplied)
Networking equipment (modem, etc.) Broadband router or hub
E5WA0UD_EN_v3.book Page 20 Thursday, March 24, 2011 1:43 PM
EN
EN - 21
䡲Wi-Fi Connection
DNote
• After you made the Wi-Fi connection, set up necessary network settings.
(For the network setting of Wi-Fi connection, refer to “Wireless” on page 46.)
• For a Wi-Fi router, use a router which supports IEEE 802.11 b/g/n.
(“n” type is recommended for stable operation of the Wi-Fi network.)
• Set the Wi-Fi router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the Wi-Fi network connection.
LAN WAN
Internet
LAN cable (not supplied)
Wi-Fi router
Networking equipment (modem, etc.)
E5WA0UD_EN_v3.book Page 21 Thursday, March 24, 2011 1:43 PM
EN - 22
5. BEFORE YOU START
5.1. Finding the Viewing Channel /
Source on Your TV
After you have completed all the connections, you must
find the viewing channel (external input source) on your
TV.
1. After you have made all the necessary connections,
press [Q(standby/on)] to turn on the unit.
2. Turn on your TV.
3. Press the button on the TV’s remote control that
accesses the external input channel. It may be labeled
“SOURCE”, “AV”, “AUX” or “SELECT” (refer to your
TV’s user manual). Or press “2” on the TV’s remote
control, then press channel down button repeatedly
until you see the Philips splash screen.
This is the correct viewing channel (external input
source).
• If the TV is connected by an HDMI cable, it may take
a while for the Philips splash screen to come up.
• If a certain amount of time has passed since you
turned on the unit, welcome screen appears the first
time you turn on this unit.
5.2. Initial Setup
Please follow the instructions below to complete the initial
setup.
1. While welcome screen is displayed, use [K/L] to
select “Next”, then press [OK].
2. Language setup screen will appear. Use [K/L] to
select your language, then press [OK].
3. Quick start mode setup screen will appear. Use
[K/L] to select the desired mode, then press [OK].
4. Auto software update setup screen will appear. Use
[K/L] to select the desired mode, then press [OK].
5. Network setup screen will appear. Use [K/L] to
select the desired mode, then press [OK].
• If you select “Wired”, refer to “Wired” on page 44
for further operation.
• If you select “Wireless”, refer to “Wireless” on page
46 for further operation.
Please select your
language for on-screen
display.
English
Español
Français
E5WA0UD_EN_v3.book Page 22 Thursday, March 24, 2011 1:43 PM
EN
EN - 23
6. INFORMATION ON
PLAYBACK
6.1. Information on Playback
Before you start playing back a disc, read the following
information.
䡲Playable Discs and Files
(*) Due to the intentional progression of the Blu-ray Disc™
format by its standard setting authority, the company
cannot guarantee or warrant the playability of future
extensions of the Blu-ray Disc™ format with this
product.
䡲Recommended Specifications
AVCHD
This unit cannot play back standalone AVCHD files (*.m2ts,
*.mts or *.m2t) written to a DVD. The DVD containing
AVCHD files must have a proper file and folder structure
meeting AVCHD format specifications.
Please use AVCHD compliant device / software to burn or
copy AVCHD files to DVD. (Please refer to user manuals
of the device / software for more information.)
MP3 / Windows Media™ Audio
JPEG
Resolution
䡲Folder / File Number Limitations
Blu-ray Disc™, DVD and USB storage device
• 999 folders (groups) and 9,999 files.
CD
• 255 folders (groups) and 999 tracks / files.
Playable discs Logos
Blu-ray Disc™
-BD-video
- Blu-ray 3D™ Disc
- Blu-ray 3D™ only Disc
-BD-RE* (ver.2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1 / 1.2 / 1.3)
(Recorded in BDMV format)
(Discs not finalized may not be
played back.)
DVD-video
DVD-RW
(finalized video mode discs only)
DVD-R
(finalized video mode discs only)
CD-DA (audio CD)
CD-RW
CD-R
KODAK Picture CD
DTS-CD -
Playable files Media
AVCHD DVD-RW/-R
MP3 BD-RE/-R
DVD-RW/-R
CD-RW/-R
USB storage device
Windows Media™ Audio
JPEG
Readable devices Playable files / data
USB storage device supports
USB1.1 / USB2.0
MP3, WMA, JPEG, picture-in-
picture commentary, subtitles or
other extras for BD-ROM ver. 2
(Profile 2.0 / Profile 1.1)
• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz
• Constant bit rate : 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps (WMA)
• Upper limit : 2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to 4:2:2)
• Lower limit : 32 x 32 dots
• Maximum file size of
a picture
: 12MB
E5WA0UD_EN_v3.book Page 23 Thursday, March 24, 2011 1:43 PM
EN - 24
Caution / Note for USB Storage Device
CCaution
• Philips is not responsible if the USB storage device is
not supported nor is it responsible for damage or loss
of data from the device.
• Do not try to open or modify the USB storage device.
• Do not touch the terminal surface with your fingers or
any metals.
DNote
• This unit supports USB storage device with FAT16 /
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read USB storage devices formatted
on a computer. If that is the case, please reformat the
USB storage devices in this unit and try again.
• Please keep the USB storage devices in their cases
when you are not using them.
• Some USB storage devices may not work with this unit.
• This unit can read SD cards using USB card reader (not
supplied).
Readable cards:
䡲Unplayable Discs and Files
The following discs will not be played back in this unit.
•BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• Blu-ray Disc™ that contains AVCHD files
• Blu-ray Disc™ / DVD / CD / USB storage device / SD
card contains DivX® files
• Blu-ray Disc™ / DVD hybrid disc (played back as a BD-
video only)
• DVD-RW/-R recorded in non compatible recording
format
• Super Audio CD - Only the sound on the CD layer can
be heard. The sound on the high-density Super Audio
CD layer cannot be heard.
• Playability of dual discs is not guaranteed.
• This unit cannot play back the disc contents protected
by Windows Media™ Digital Rights Management
(DRM).
䡲Region Codes
SD Memory Card (8 MB - 2 GB)
miniSD Card (16 MB - 2 GB)
microSD Card (256 MB - 2 GB)
SDHC Memory Card (4 GB - 32 GB)
miniSDHC Card (4 GB - 8 GB)
microSDHC Card (4 GB - 16 GB)
• CD-ROM • CD-I (compact disc-interactive)
• DVD-RAM • VSD (video single disc)
• DVD-audio • video CD
• HD DVD • SVCD
• unfinalized disc
This unit has been designed to play back
BD-video with region “A”, DVD-video
with region “ALL” or “1” for BDP5506/F7
(USA / Canada) and region “ALL” or “4”
for BDP5506/F8 (Mexico). You cannot
play back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
BD-video
DVD-video
For BDP5506/F7
(USA / Canada)
For BDP5506/F8
(Mexico)
E5WA0UD_EN_v3.book Page 24 Thursday, March 24, 2011 1:43 PM
EN
EN - 25
䡲Hint for Disc Playback
The contents of a disc are generally divided into sections or
folders (groups of titles / files) as shown below.
䡲Description for Icons
[ ] : group (folder) icon
[ ] : music file icon
- “Folders” refers to the groups of files.
- “Tracks” refers to the contents recorded on the audio
CD.
- “Files” refers to the contents on a disc which are
recorded in AVCHD, MP3, Windows Media™ Audio,
JPEG (including KODAK Picture CD) file format.
DNote
• Unrecognizable characters will be replaced with
asterisks.
6.2. Guide to File List
䡲Music File List
e.g.) MP3 mode
1. Current track (file) number / Total number of
tracks (files)
2. Elapsed playing time of the current track
3. Playback status
4. Media type
5. Image
6. Group (folder) / File list
7. Name of disc / USB storage device
䡲Picture File List
1. Current file number / Total number of files
2. Playback status
3. Media type
4. Image
5. Group (folder) / File list (thumbnails)
BD-video, DVD-video, AVCHD
title 1 title 2
chapter 1 chapter 2 chapter 2chapter 1 chapter 3
Audio CD
track 1 track 2 track 3 track 4 track 5
MP3,Windows Media™ Audio, JPEG
folder (group) 1 folder (group) 2
file 1 file 2 file 3 file 4 file 5
5
4
23
1
7
6
DATACD
1 / 25 0 : 00 : 12
MP3_
Audio
MP3_1.mp3
MP3_2.mp3
MP3_3.mp3
MP3_4.mp3
MP3_5.mp3
MP3_6.mp3
File List
Track Time
Disc
Page Up
Picture CD
12
5
3
4
1/50
Thumbnail
Track
Pictures
Page Up
Photo Folder
Page Down
E5WA0UD_EN_v3.book Page 25 Thursday, March 24, 2011 1:43 PM
EN - 26
6.3. How to Insert a Disc
1. Press [A(open/close)] to open the disc tray.
2. Place the disc on the disc tray with its label side facing
up.
3. Press [A(open/close)] to close the disc tray.
• It may take a while to load the disc.
7. BASIC PLAYBACK
7.1. Playing Back a Disc
1. Insert a disc (refer to “How to Insert a Disc” on page
26).
• For Blu-ray Disc™ / DVD / audio CD or a disc
containing only one type of file, playback will start
automatically. If not, press [B(play)].
• Some discs may show a title or a disc menu. In this
case, refer to “Using the Title / Disc / Pop-up Menu”
on page 29.
• Media filter screen will appear.
2. Select the type of the file you want to play back, then
press [OK].
3. For “AVCHD”, playback will start automatically.
For “Music”, track / file list will be displayed. Select a
group (folder) or track / file you want to play back then
press [B(play)] or [OK] to start playback.
• Refer to “Music File List” on page 25 and “How to
Navigate through the Track / File List” on page 26.
For “Photo”, thumbnail screen will appear.
• Refer to “Picture File List” on page 25 and “How to
Navigate through the Track / File List” on page 26.
How to Navigate through the Track / File List
•Use [K/L] to move the highlight up and down in the
list.
• To access the files in a group (folder), select the
desired group (folder), then press [OK].
• Press [s] or [BACK U] to go back to the
previous hierarchy.
• Press [Red] or [Green] to change the page of the
list.
• Press [Yellow] to go back to the media mode
screen.
• Press [(home)] to go back to the home menu.
Align the disc to the
disc tray guide.
Music Photo AVCHD
E5WA0UD_EN_v3.book Page 26 Thursday, March 24, 2011 1:43 PM
EN
EN - 27
To skip to the next track / file :
Press [T(next)].
To skip to the previous track / file :
Press [S(previous)].
To pause playback :
Press [F(pause)].
To return to normal playback :
Press [B(play)].
To stop playback :
Press [C(stop)].
Playback will be in Resume-On-Stop mode.
䡲Resume-On-Stop Mode
Blu-ray Disc™ / DVD / AVCHD :
When you press [B(play)] next time, the playback
will start from the point where it has been stopped.
Audio CD :
Playback will start from the point where it is stopped
next time you press [B(play)]. If you press [OK]
instead of [B(play)], playback will start from the
beginning of the track / file instead of resuming from the
stop point.
MP3 / WMA / JPEG / KODAK Picture CD :
Playback will start from the beginning of the current file
next time you press [B(play)] or [OK].
DNote
• Playback will also stop and the home menu will appear
when you press [(home)].
• For BD-Java application, the Resume-On-Stop may not
be available.
• If you press [OK] instead of [B(play)], playback can
be started from the beginning of the disc even if it was
in the Resume-On-Stop mode.
• Resume-On-Stop mode remains in effect even after
power is turned off, but will be canceled once the disc
is ejected.
• With regard to the multi-border BD-RE/-R, additionally
recorded sections cannot be recognized.
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be recognized.
ETips for JPEG / KODAK Picture CD Playback
• Every press of [s/B] will turn the image by 90
degrees when an image is displayed.
• During playback, press [TOP MENU] to display
thumbnail screen.
• This unit conforms to ver.7.0 of KODAK Picture CD.
For details of KODAK Picture CD, contact a shop that
provides developing service for Kodak Inc.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.
E5WA0UD_EN_v3.book Page 27 Thursday, March 24, 2011 1:43 PM
EN - 28
7.2. Playing Back a Blu-ray 3D™ Disc
This unit can play back Blu-ray 3D™ discs which contain
stereoscopic 3D video. In order to view Blu-ray 3D™
videos, you need to have the following:
- 3D capable TV
- 3D compatible HDMI cable
- 3D glasses
- Blu-ray 3D™ Disc or Blu-ray 3D™ only Disc
1. Connect 3D capable TV with a 3D compatible HDMI
cable.
• Refer to “HDMI Video / Audio Connection” on page 15.
2. Insert a Blu-ray 3D™ Disc or a Blu-ray 3D™ only Disc.
• Refer to “How to Insert a Disc” on page 26.
3. Playback may start automatically. If not, press
[B(play)].
Some discs may show a title or a disc menu. In this case,
refer to “Using the Title / Disc / Pop-up Menu” on page
29.
To pause playback:
Press [F(pause)].
To return to normal playback:
Press [B(play)].
To stop playback:
Press [C(stop)].
Playback will be in Resume-On-Stop mode, and the
home menu will appear.
䡲Resume-On-Stop mode
When you press [B(play)] next time, the playback
will start from the point where it has been stopped.
CCaution
• Watching 3D videos may cause headache, dizziness or
tiredness.
To avoid such consequences, do not watch 3D videos
for a long period of time.
• Watching 3D videos is not recommended for the
following people:
- People who are susceptible to motion sickness
- Children from walking age to seven years
- Pregnant woman
For more information, refer to “IMPORTANT HEALTH
AND SAFETY INFORMATION FOR 3D TELEVISIONS”
on page 60.
DNote
• For more information, refer to the 3D TV’s manual.
•When
“3D Output”
is set to
“Auto (XX)”
and your TV is
not 3D capable, playback of Blu-ray 3D™ discs will
revert to 2D depending on the disc.
• You can turn off 3D output mode by setting “3D
Output” to “2D”. (Refer to page 39.)
• For some Blu-ray 3D™ only discs, playback in 2D mode
is not possible.
• You can check the current output mode (2D or 3D) by
pressing [INFO] during playback.
• If you change “3D Output” setting to “2D” while the
unit is in the Resume-On-Stop mode of Blu-ray 3D™
Disc playback, the resume information will be cleared.
E5WA0UD_EN_v3.book Page 28 Thursday, March 24, 2011 1:43 PM
EN
EN - 29
7.3. Playing Back Contents on a USB
Storage Device
You can play back MP3 / WMA / JPEG files from a USB
storage device. With the USB storage device, you can also
enjoy the following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1.
(For more information about the special additional
contents, refer to the instruction book that came with
the disc.)
- BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For
more information about BD-Live™, refer to page 31.)
1. Connect a USB storage device to the USB input.
2. Press [(home)].
3. Use [K/L/s/B] to select “Browse USB”, then
press [OK].
4. Follow steps 2 to 3 in “Playing Back a Disc” on page 26.
To remove the USB storage device:
In stop mode, pull it out slowly.
CCaution
• Do not remove the USB storage device or switch the
unit to standby mode while the contents of the device
are being accessed. It may result in malfunction or loss
of the device data.
• Philips cannot be held responsible if your USB storage
device is not supported, nor will Philips accept any
liability for damage or loss of stored data.
• If a USB card reader is connected, files in an SD card
which is connected first to the slot of the reader will be
displayed.
DNote
• The resume information will be cleared when;
- [C(stop)] is pressed while in the Resume-On-Stop
mode.
- the USB storage device is removed.
- the unit is switched to standby mode.
• Do not delete the folders or files in the USB storage
device with your computer. This unit may not read USB
storage devices formatted on a computer.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name may
not be displayed correctly.
- Unrecognizable characters :
• This unit can read MP3 / WMA / JPEG files in an SD
card by using USB card reader (not supplied).
7.4. Using the Title / Disc / Pop-up Menu
Some BD-videos, DVD-videos or AVCHD files may contain
a title menu which describes the contents of the disc, or a
disc menu which guides you through the available functions
in the disc.
With such discs, a title menu or a disc menu may appear
automatically when you insert the disc. Otherwise, press
[TOP MENU] or [DISC MENU / POP-UP MENU]
to call up the menu. Refer to the disc’s manual on how to
navigate through the menu.
DNote
• Menus vary among discs. Refer to the information
accompanying the disc for details.
•
[TOP MENU]
or
[DISC MENU / POP-UP MENU]
may not work with some discs.
. , " = + [ ] ; / \ : | ¥
E5WA0UD_EN_v3.book Page 29 Thursday, March 24, 2011 1:43 PM
EN - 30
8. SPECIAL PLAYBACK
8.1. Fast Forward / Fast Reverse
1. During playback, press [D(forward)] repeatedly for
fast forward.
During playback, press [E(reverse)] repeatedly for
fast reverse.
Every time you press [D(forward)] or
[E(reverse)], the playback speed will change.
2. Press [B(play)] to return to normal playback.
DNote
• For Blu-ray Disc™, DVD and AVCHD, speed changes
in 5 different levels.
• For audio CD, MP3 and Windows Media™ Audio,
speed changes in 3 different levels.
• For audio CD, fast forward / fast reverse search
between different tracks are not available during
random playback.
• For MP3 and Windows Media™ Audio, fast forward /
fast reverse search between different files are not
available.
8.2. Slow Forward Playback
1. During playback, press [F(pause)] . Then press
[D(forward)].
Every time you press [D(forward)], the playback
speed changes in 3 different levels.
2. Press [B(play)] to return to normal playback.
DNote
• Only slow forward is available.
8.3. Step by Step Playback
1. In pause mode, press [T(next)] repeatedly.
Every time you press [T(next)], playback will
advance one step at a time.
2. Press [B(play)] or [F(pause)] to return to normal
playback.
DNote
• Only step by step forward is available.
8.4. Repeat Playback
Available repeat function varies depending on the discs.
1. During playback, press [REPEAT].
2. Use [K/L] to select the desired repeat mode.
3. Press [BACK U] to exit.
REPEAT MODE AVAILABLE MEDIA
Chapter Repeat
The current chapter will be
played back repeatedly.
Title Repeat
The current title will be
played back repeatedly.
Track Repeat
The current track or file
will be played back
repeatedly.
All Repeat
All tracks in the media will
be played back repeatedly.
Group Repeat
The current group (folder)
will be played back
repeatedly.
Random Repeat
(Audio CD)
Repeats the random
playback.
Random Repeat
(MP3 /
Windows Media™
Audio / JPEG)
Repeats the random
playback in a folder.
E5WA0UD_EN_v3.book Page 30 Thursday, March 24, 2011 1:43 PM
EN
EN - 31
DNote
• The repeat setting will be canceled when you stop
playback.
• When the repeat setting is set for an MP3 or WMA
folder (file), the repeat setting will be canceled if you
select other MP3 or WMA folder (file) to play back.
8.5. Slide Show
1. Follow steps 1 to 2 in “Playing Back a Disc” on page 26.
2. Open the folder which contains the desired JPEG files.
3. Use [K/L/s/B] to select a desired file to be
played back, then press [B(play)] or [OK].
• An image will be played back from the selected file
and go to the next one in turn every 10 seconds.
4. Press [C(stop)] to stop playback.
To return to the first item:
Press [TOP MENU].
To return to the file played last:
Press [DISC MENU / POP-UP MENU].
DNote
• During playback, press [TOP MENU] to display
thumbnail screen.
• Large-size JPEG files take a few moments to be
displayed.
8.6. PiP (BONUSVIEW™) Setting
Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video.
1. During playback, press [BONUSVIEW (PiP)].
2. Use [K/L] to select the secondary video you want to
show.
• The secondary video will be displayed with the
secondary audio.
•Use [s/B] to switch between current setting and
“Off”.
3. Press [BACK U] to remove the PiP information.
• On how to output the secondary audio, refer to
“Switching Audio Soundtrack” on page 34 and
“Blu-ray Disc Audio” on page 39.
8.7. Enjoying BD-Live™ Discs Using the
Internet
You can enjoy BD-Live™ which enables you to use
interactive features when the unit is connected to the
Internet.
Examples of BD-Live™ features:
• Online access to additional content such as movie
trailers, subtitles, BD-Java applications, etc.
• While downloading, special video data may be played
back.
- Service and functions differ depending on the
disc. Follow the instructions given by the disc
when using the BD-Live™ function.
- Insert a USB storage device of at least 1GB
capacity before using BD-Live™ features on a
Blu-ray Disc™.
- Do not remove the USB storage device while
using BD-Live™ features.
PiP 1/8
Primary
video
Secondary
video
E5WA0UD_EN_v3.book Page 31 Thursday, March 24, 2011 1:43 PM
EN - 32
DNote
• You must connect the unit to the Internet and set up
necessary settings in order to use BD-Live™.
• For the network connection, refer to “Connection to
the Network” on page 20.
• For the network setup, refer to “Network Installation”
on page 43.
• For certain discs, BD-Live™ setting in “Manual Setup”
may need to be changed. (Refer to page 44.)
• Depending on your connection environment, it may
take time to connect to the Internet or the Internet
may not be connected.
• When BD-Live™ functions are used and the unit is
connected to the Internet, you may be charged for this
communication.
• Some discs with BD-Live™ function require memory
when playing back the content. If you cannot play back a
disc with BD-Live™ function, insert a USB storage
device (1GB or more) which is formatted on this unit.
DNote for AACS Online
• The player or disc IDs may be sent to the content
provider when playing back a disc with BD-Live™
function.
• If you save your viewing history on the server by using
these IDs, you will be introduced to other similar
movies.
• You can save game score histories.
8.8. Title / Chapter Search
䡲Using [S(previous)] / [T(next)]
1. During playback, press [T(next)] to skip the current
title or chapter and move to the next.
The title or chapter will move forward one at a time.
• If there is no chapter in one title, the current title
may be skipped.
To go back to the beginning of the current title or
chapter, press [S(previous)].
Press [S(previous)] repeatedly to go to the
previous title or chapter. The title or chapter may
move backward one at a time.
䡲Using [OPTION]
1. During playback, press [OPTION] to display the play
menu.
2. Use [K/L] to select “Search”, then press [OK].
3. Use [K/L] to select “Title” or “Chapter”, then press
[OK].
e.g.) Blu-ray Disc™
4. Use [K/L/s/B] to select the title / chapter
number.
5. Press [OK].
Playback will start from the beginning of the title /
chapter.
6. Press [BACK U] to exit.
䡲Using [the Number buttons] (Direct Search)
Chapter Search
During playback of a title, enter the chapter number you
want to search using [the Number buttons].
Playback of the chapter will start in a few seconds.
DNote
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described.
001 / 999Search Title
E5WA0UD_EN_v3.book Page 32 Thursday, March 24, 2011 1:43 PM
EN
EN - 33
8.9. Track Search
1. During playback, press [T(next)] to skip the current
track or file and move to the next.
The track / file will move forward one at a time. To go
back to the beginning of the current track / file, press
[S(previous)].
Press it repeatedly to go to the previous track / file.
The track / file will move backward one at a time.
8.10. Time Search
1. During playback, press [OPTION] to display the play
menu.
2. Use [K/L] to select "Search", then press [OK].
3. Use [K/L] to select "Time", then press [OK].
e.g.) Blu-ray Disc™
4. Use [K/L] or [the Number buttons] to enter the
time count you want to jump to.
e.g.) Entering 1 hour 45 minutes and 15 seconds.
Press
5. Press [OK].
Playback will start from the desired time entered.
6. Press [BACK U] to exit.
8.11. Switching Subtitles
Some video materials may have subtitles in one or more
languages. For commercially available discs, the supported
languages can be found on the disc case. Follow the steps
below to switch the subtitle language during playback.
1. During playback, press [SUBTITLE].
2. Use [K/L] to select “Primary”, “Secondary” or
“Style”, then press [OK].
3. Use [K/L] to select your desired subtitle or style.
•Use [s/B] to switch between current subtitle
setting and “Off”.
4. Press [BACK U] to exit.
1. During playback, press [SUBTITLE].
2. Use [K/L] to select your desired subtitle.
•Use [s/B] to switch between current subtitle
setting and “Off”.
3. Press [BACK U] to exit.
DNote
• Some discs will only allow you to change the subtitles from
the disc menu or pop-up menu. Press
[TOP MENU]
or
[DISC MENU / POP-UP MENU]
to display the disc
menu or pop-up menu.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is no
subtitle for the secondary video.
• You can also change the subtitle setting from the play
menu. Play menu can be called up by pressing
[OPTION].
00:12:44 / 11:13:14
Search Time
“Primary” : Sets the subtitle for the primary
video.
“Secondary” : Sets the subtitle for the secondary
video.
“Style” : Sets style of the subtitle.
/ 255
1Subtitle Primary
Secondary
Style
ENG
Off
Off
/ 321Subtitle ENG
E5WA0UD_EN_v3.book Page 33 Thursday, March 24, 2011 1:43 PM
EN - 34
8.12. Switching Audio Soundtrack
When playing back video material recorded with two or
more soundtracks (these are often in different audio
languages or audio formats), you can switch them during
playback. For Blu-ray Disc™, available audio varies
depending on “Blu-ray Disc Audio” setting. Refer to page
39 for more information.
1. During playback, press [AUDIO].
2. Use [K/L] to select “Primary” or “Secondary”, then
press [OK].
3. Use [K/L] to select your desired audio stream
channel.
• For “Secondary”, use [s/B] to switch between
current audio setting and “Off”.
4. Press [BACK U] to exit.
1. During playback, press [AUDIO].
2. Use [K/L] to select your desired audio stream
channel.
• For audio CD, you can select following options.
3. Press [BACK U] to exit.
DNote
• The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray Disc
Audio” is set to “Primary Audio Only”. (For some Blu-
ray™ discs, secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during playback of
discs not recorded in multiple audio mode.
• Some discs allow changing the audio language setting on
the disc menu. (Operation varies depending on the
discs. Refer to the manual accompanying the disc.)
•[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If the disc has no audio language, “Not Available” will be
displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
• You can also change the audio setting from the play
menu. Play menu can be called up by pressing
[OPTION].
8.13. Switching Camera Angles
Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You can
change the camera angle when appears on the TV
screen.
1. During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2. Use [K/L] to select your desired angle.
3. Press [BACK U] to exit.
DNote
• If “Angle Icon” setting is set to “Off”, will not
appear on the TV screen. (Refer to page 41.)
• You can also change the angle setting from the play
menu. Play menu can be called up by pressing
[OPTION].
“Primary” : Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
“Stereo” : Both right and left channels are
active (stereo).
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
/ 3
/ 3
1
1
Audio Primary
Secondary
ENG Dolby D Multi-ch
ENG DTS Multi-ch
Dolby D[Decoding Format] :
1/ 3Audio ENG Dolby D
Dolby D
Multi-ch
[Decoding Format] :
E5WA0UD_EN_v3.book Page 34 Thursday, March 24, 2011 1:43 PM
EN
EN - 35
8.14. Black Level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
1. During playback, press [OPTION] to display the play
menu.
2. Use [K/L] to select “Black Level”, then press [OK].
3. Use [K/L] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK U] to exit.
DNote
• The setting will remain the same even if the unit is
switched to standby mode.
• “Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.
8.15. Noise Reduction
Reduces the noise of the playback picture.
1. During playback, press [OPTION] to display the play
menu.
2. Use [K/L] to select “Noise Reduction”, then press
[OK].
3. Use [K/L] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK U] to exit.
DNote
• The setting will remain the same even if the unit is
switched to standby mode.
8.16. Virtual Surround
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1. During playback, press [OPTION] to display the play
menu.
2. Use [K/L] to select “Virtual Surround”, then press
[OK].
3. Use [K/L] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [BACK U] to exit.
DNote
• Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.
• For the virtual surround, audio signal will always be
2-channel LPCM.
“On” : Makes the dark parts blacker with additional
contrast and brightness.
“Off” : Shows the original picture as recorded.
“On” : Activates noise reduction.
“Off” : Deactivates noise reduction.
Black Level On
Noise Reduction Off
“On” : Activates surround effect.
“Off” : Deactivates surround effect.
Virtual Surround Off
E5WA0UD_EN_v3.book Page 35 Thursday, March 24, 2011 1:43 PM
EN - 36
8.17. Philips Wireless MediaConnect
With this feature, you can enjoy your TV as a PC monitor
wirelessly using your home network. Make sure you
download the Philips Wireless MediaConnect software and
install it on your PC before you perform the steps below.
䡲Install Philips Wireless MediaConnect
1. Press [(home)] on the Blu-ray Disc™ Player
remote.
2. Use [K/L/s/B] to select “Setup”, then press
[OK].
3. Use [K/L] to select “Network Setup”, then press
[OK].
4. Use [K/L] to select “MediaConnect”, then press
[OK].
• Write down the 12-digit code displayed on the
screen. You will need this to download
MediaConnect software.
5. Start your Internet browser on your PC and open the
Philips Wireless MediaConnect download page at
www.wifimediaconnect.philips.com. On the website,
you can check the necessary PC system requirements.
6. Enter the 12-digit code you wrote at step 4 and
download the MediaConnect software.
7. Click the “Download now” button to download the
free Philips Wireless MediaConnect software.
8. Once downloaded, run the file “Philips Wireless
MediaConnect_setup.exe”. Follow the instructions on
your PC to complete software installation.
䡲Using Philips Wireless MediaConnect
1. Launch Philips Wireless MediaConnect on your PC
first.
• Select “Start projecting” with right click on the in
the system tray.
2. Press [(home)] on the Blu-ray Disc™ Player
remote.
3. Use [K/L/s/B] to select “MediaConnect”, then
press [OK].
• The startup screen for Philips Wireless
MediaConnect will be displayed and the unit searches
for an available PC that is running Philips Wireless
MediaConnect software.
Once connected, the Philips Wireless MediaConnect
software will encode and stream the screen of your PC as a
video along with audio.
Depending on your computer and network configuration,
there will be a delay between your PC screen and the TV
but the audio-video will always be in sync.
Philips Wireless MediaConnect Help
To read the Philips Wireless MediaConnect Help, right
click the program icon in the notification tray of the PC and
select Help.
Specifics
You can project high definition (HD) or standard definition
(SD) video, depending on the processing power of your PC.
For smooth playback of HD video, please use a hardware
accelerated video player on your computer.
A hardware accelerated video player uses the graphics
adapter of your PC to render HD video rather than the
processor. This frees up the processor for Philips Wireless
MediaConnect video encoding. The content protection on
most DVD or Blu-ray Disc™ movies might restrict
watching the movie on TV when the disc is playing on a PC.
The TV shows PC media files with a small delay. Philips
Wireless MediaConnect is only available for PC.
PC and network requirements
Supported OS
Windows XP, Windows Vista, Windows 7 (PC only)
Minimum requirements
• Intel Core 2 Duo 1.8GHz
• 512MB RAM
• IEEE 802.11n (PC and wireless router)
Recommended requirements
• Intel Core 2 Duo 2.1GHz
•1GB RAM
E5WA0UD_EN_v3.book Page 36 Thursday, March 24, 2011 1:43 PM
EN
EN - 37
9. NETWORK SERVICES
9.1. Before Using Network Services
Please follow the instructions below before using network
features.
1. Connect this unit to the Internet.
• Refer to “Connection to the Network” on page 20.
2. Set up the necessary network connection settings.
• Refer to “Network Installation” on page 43.
3. Press [Net-TV].
• Net TV screen will appear.
• For the first time only, "Philips Terms of Use
Internet Enabled Product" screen will appear. After
confirming the content, press [OK].
4. Press [(home)] to exit.
䡲Guide to Net TV menu screen
1. Sorting items :
Categorizes genre of each services
2. Network Service icons :
Displays service icons
3. Country :
Selects what country you live
4. Terms of Use :
Displays a clause of net service
9.2. Information on Network Services
For detailed information on 3rd party Internet services,
please visit the service providers website:
10. PANDORA OPERATIONS
With this unit, You can instantly listen to personalized
radio stations streamed over the Internet from Pandora.
To learn more about Pandora, please visit
www.pandora.com
10.1. Activating Pandora
In order to listen to Internet radio streamed from Pandora
via the Internet, you must create a Pandora account and
activate this unit.
1. Follow steps 1 to 3 in “Before Using Network Services”
on page 37.
2. Use [K/L/s/B] to select “PANDORA”, then
press [OK].
3. Use [K/L] to select “CREATE NEW
ACCOUNT”, then press [OK].
4. Use [K/L] to select “No, I am new to Pandora.”,
then press [OK].
5. Note the activation code and website address displayed
on the TV screen.
6. On your PC, visit the website address noted at step 5.
7. Follow directions on the website to create your
account.
8. On this unit, select “CONTINUE” and press [OK]
to complete activation.
10.2. Adding Pandora User Accounts
You can add multiple Pandora user accounts on this unit.
1. Follow steps 1 to 3 in “Activating Pandora” on page 37.
2. Use [K/L] to select “Yes, I have a Pandora
account”, then press [OK].
3. Enter your e-mail address, then press [OK] while
“OK” is selected.
4. Enter a password, then press [OK] while “OK” is
selected.
5. Use [K/L] to select “SIGN IN”, then press [OK].
• Your account is added to the user list and player
screen appears on the TV screen.
DNote
• Pandora is available only in the United States.
• You can add up to 5 accounts. After creating 5
accounts, “CREATE NEW ACCOUNT” is not
displayed.
• If you forget your password, please enter your Pandora
account's e-mail address and select “Password
Recovery”, then press [OK]. After a while, an e-mail
of password reset will be sent to the e-mail address.
Netflix : http://www.netflix.com/HowItWorks
Film Fresh : http://filmfresh.roxionow.com/
Blockbuster
: http://www.blockbuster.com
VUDU :
http://www.vudu.com/product_overview.html
Terms of Use Country USA
All
Video
Music
Game
News
Lifestyle
1
4
2
3
E5WA0UD_EN_v3.book Page 37 Thursday, March 24, 2011 1:43 PM
EN - 38
10.3. Creating a New Station
By entering your favorite artists or songs, Pandora selects
music and creates a new station for you on the basis of the
entered information.
1. On the player screen, press [Blue] to display station
list.
2. Press [Yellow] to call up the “Tool Menu”.
3. Use [K/L] to select “Create a new station”, then
press [OK].
4. Enter a name of your favorite artist or song, then press
[OK] while “OK” is selected.
• Search result will appear on the right side of the TV
screen.
• If the selection screen of result type appears, use
[K/L] to select the desired type, then press [OK].
5. Use [K/L] to select the desired station, then press
[OK] to start the playback.
DNote
•On the “Tool Menu”, you can delete or rename the
currently selected station.
10.4. Guide to the Player Screen
On the player screen, you can set various options to the
currently playing song.
Button Action
[F(pause)] Pause the playback.
Resume the playback, press
[B(play)].
[C(stop)] Stop the playback and the station list
will appear.
[T(next)] Skips to the next song.
1. : Give thumbs up to the currently
playing song. Pandora will play songs
similar to the song.
2. : Give thumbs down to the currently
playing song. Pandora will skip and will
not play the song.
3. : Bookmarks the currently playing song.
You can view your bookmarked songs
list by accessing Pandora website and
log into your account.
4. : Tells Pandora that you do not like the
currently playing song. Pandora will
not play the song for about a month.
XXXXX
XXXXX
ABC
American Oldies Radio
Station List
4:52 0:00
1234
E5WA0UD_EN_v3.book Page 38 Thursday, March 24, 2011 1:43 PM
EN
EN - 39
11. LIST OF SETTINGS
In the setup menu, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menu.
1. Press [(home)] to access the home menu.
2. Use [K/L/s/B] to select “Setup”, then press [OK].
3. Use [K/L] to select the desired setting, then press [OK].
4. Use [K/L] to move the highlight up and down in the list.
5. To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [BACK U].
6. Press [(home)] to exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category Menus / Options
Video Setup 3D Output Auto (XX)
3D
2D
TV Display 4:3 Normal
4:3 Crop
16:9 Widescreen
16:9 Squeeze
HDMI Video Auto
480p
720p
1080i
1080p
1080p/24
HDMI Deep Color Auto
Off
De-interlacing Mode Auto
Video
Audio Setup Night Mode Auto
On
Off
HDMI Audio Bitstream
LPCM
Off
Digital Audio Bitstream
LPCM
PCM Downsampling On
Off
Blu-ray Disc Audio Mix Audio Output
Primary Audio Only
Network Setup Network Installation Start
Connection Test
View Network Settings
View Wireless Settings
Netflix ESN
MediaConnect
Deactivation Netflix
FILM FRESH
BLOCKBUSTER
VUDU
E5WA0UD_EN_v3.book Page 39 Thursday, March 24, 2011 1:43 PM
EN - 40
Category Menus / Options
EasyLink Setup EasyLink On
Off
One Touch Play On
Off
One Touch Standby On
Off
Preference Setup Menu Language Auto (XXXX)
English
Español
Français
Audio Original
Bulgarian Italian
Chinese Japanese
Czech Korean
Danish Norwegian
Dutch Polish
English Portuguese
Finnish Romanian
French Russian
German Slovak
Greek Spanish
Hungarian Swedish
Icelandic Turkish
Irish Other
Subtitle Off
Bulgarian Italian
Chinese Japanese
Czech Korean
Danish Norwegian
Dutch Polish
English Portuguese
Finnish Romanian
French Russian
German Slovak
Greek Spanish
Hungarian Swedish
Icelandic Turkish
Irish Other
E5WA0UD_EN_v3.book Page 40 Thursday, March 24, 2011 1:43 PM
EN
EN - 41
* When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.
Category Menus / Options
Preference Setup Disc Menu Bulgarian Italian
Chinese Japanese
Czech Korean
Danish Norwegian
Dutch Polish
English Portuguese
Finnish Romanian
French Russian
German Slovak
Greek Spanish
Hungarian Swedish
Icelandic Turkish
Irish Other
Parental Control Off
8 [Adult] 4 [PG-13]
7 [NC-17] 3 [PG]
6 [R] 2 [G]
5 [PGR] 1 [Kid Safe]
Change Password
Screen Saver On
Off
Angle Icon On
Off
Display Panel Auto
Bright
Dimmer
Advanced Setup Software Update Disc
Network
USB
Automatically check for latest
software
On
Off
Quick Start Mode* On
Off
Version Info
Restore default settings Reset Settings
Format USB
(Unit) Erase Saved BD-ROM Data
(USB) Erase Saved BD-ROM Data
Reset Network Settings
E5WA0UD_EN_v3.book Page 41 Thursday, March 24, 2011 1:43 PM
EN - 42
12. SETUPS
12.1. TV Display
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your
TV monitor without distorting the picture. Descriptions of
each setting are as follows:
12.2. HDMI Video
Set the resolution of the video signal being output from the
HDMI OUT jack.
You can select the desired “HDMI Video” among the
settings listed below:
“Auto”,“480p”,“720p”,“1080i”,“1080p”,“1080p/24”
Actual Output Resolution :
• Composite video output (VIDEO OUT) jack can only
output 480i/60.
• For AVCHD, outputting the video in 24 frames per
second (1080p/24) is not available.
DNote
• You can also change the resolution of the video signal
being output from the HDMI OUT jack by pressing
[HDMI] repeatedly.
•Pressing [HDMI] does not work when HDMI cable is
not connected, or when no video signal is being output
from the HDMI OUT jack.
•Pressing [HDMI] does not work during the playback
of a BD-video.
• The selected resolution must also be supported by
your display device.
• Even if “HDMI Video” is set to “1080p/24”, for a Blu-
ray Disc™ that is not recorded in 1080p/24 or for
DVD, the video resolution supported by the disc and
the display device will be output instead of 1080p/24.
• Refer also to your TV’s manual.
(home) A“Setup” A“Video Setup” A“TV Display”
Video
source Your TV Option Description
16:9
4:3
4:3 Normal To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
both sides of the
picture fits the 4:3
TV.
4:3 Crop To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
16:9
16:9 Widescreen To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
4:3
16:9 Squeeze To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.
(home) A“Setup” A“Video Setup” A“HDMI Video”
Setting in
the “HDMI
Video”
Source
480i/60 720p/60 1080i/60 720p/24 1080p/24
480p 480p/60 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60 1080p/60
1080p/24 1080p/60 1080p/60 1080p/60 1080p/60 1080p/24
Auto The highest resolution supported by your display device will
be in effect automatically.
E5WA0UD_EN_v3.book Page 42 Thursday, March 24, 2011 1:43 PM
EN
EN - 43
• When the HDMI OUT jack is outputting the video in
1080p/24, picture will not be output from the VIDEO
OUT jack.
• When connected to an HDCP incompatible display
device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including
the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some
do not support audio output (for example, projectors).
While connected to a device such as a projector, audio
will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a
DVI-D compatible display device(s) (HDCP compatible)
with an HDMI-DVI converter cable, the signals are
output in digital RGB.
• When you make a selection, the TV monitor
temporarily goes blank and then comes back again. If it
does not come back, press [HDMI] repeatedly to
change the resolution or touch and hold [B(play)]
on the front panel for 5 seconds to change the setting
back to its default.
• When playing back a Frame Sequential 3D Disc, video
resolution of output picture will depend on contents on
the disc. (“HDMI Video” setting is not applicable for
Frame Sequential 3D Discs.)
12.3. Network Installation
Set up network connection settings in order to use
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU /
Pandora or network update function.
䡲Connection Test
After you enable a network connection or change the
network settings, always perform the connection test to
check if the connection is correctly made.
1. Use [K/L/s/B] to select “Setup” in the home
menu, then press [OK].
2. Use [K/L] to select “Network Setup”, then press
[OK].
3. Use [K/L] to select “Network Installation”, then
press [OK].
4. Use [K/L] to select “Connection Test”, then press
[OK].
• Connection test will start automatically and the test
result will appear right after the connection test
finishes.
- “Connecting...” : The test is in progress.
- “Pass” : Connection test is successfully completed.
- “Failed” : Connection test failed. Check the
connection settings.
5. Press [OK] to go back to the setup menu, or press
[(home)] to exit.
Copyright protection system
To play back the digital video images of a BD-video or
DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV
receiver / amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please
read the operating instructions of your display device (or
an AV receiver / amplifier) for more information.
(home) A“Setup” A“Network Setup” A“Network
Installation”
E5WA0UD_EN_v3.book Page 43 Thursday, March 24, 2011 1:43 PM
EN - 44
DNote
• If the connection test passes, you are ready to use
BD-Live™, Netflix / Film Fresh / Blockbuster
/ VUDU
/
Pandora or network update function, using the Internet
without making any additional settings.
• If the connection test fails, you may need to check your
router settings and make sure the physical connection
is secure. If you need the MAC address of this unit to
complete your router settings you can view it on the
“View Network Settings” / “View Wireless Settings”
screen (refer to page 48).
• When connecting this unit directly to a modem for the
first time or connecting it to a modem which was
previously connected to any other network device (e.g.
a router, PC, etc.), you may have to power cycle the
modem to reset the settings on the modem.
䡲Wired
Select “Wired” if you made a wired connection and set the
setting to “Auto Setup” or “Manual Setup”, in accordance
with your network environment.
Auto Setup
Select “Auto Setup” to set the network setting
automatically.
1. Follow steps 1 to 3 in “Connection Test” on page 43.
2. Use [K/L] to select “Start”, then press [OK].
3. Use [K/L] to select “Wired”, then press [OK].
4. Use [K/L] to select “Auto Setup”, then press [OK].
• The unit will start the connection test automatically
and the test result will appear right after the
connection test finishes.
5. Select “Finish” to activate the network settings and set
the network connection automatically.
Manual Setup
In following cases, select “Manual Setup” to set each setting
as necessary.
- When connection test failed with the setting of
“Auto Setup”.
- When instructed by your Internet service provider to
make specific settings in accordance with your
network environment.
1. Follow steps 1 to 3 in “Auto Setup” on page 44.
2. Use [K/L] to select “Manual Setup”, then press
[OK].
3. Use [K/L] to select “IP Address”, then press [OK].
4. “IP Address” setting screen will appear. Enter IP
address with cursor buttons and number buttons.
• Enter the IP address after checking the specifications
of your router.
• If the IP address is unknown, check the IP address of
other devices. (e.g. PC connected via LAN cable) and
assign a different number from those of other
devices.
5. Use [K/L/s/B] to select “Done”, then press
[OK].
0000
...
IP Address
Please input the IP Address.
Cancel Clear Done
E5WA0UD_EN_v3.book Page 44 Thursday, March 24, 2011 1:43 PM
EN
EN - 45
6. Select “Subnet Mask”, “Default Gateway”, “Primary
DNS” and “Secondary DNS” in turn, and enter each
address number with cursor buttons and number
buttons, then press [OK].
• Enter the DNS addresses provided by your Internet
provider.
• If the DNS address is unknown, check the DNS
address of other devices (e.g. PC connected via LAN
cable) and assign the same DNS address.
7. Use [K/L/s/B] to select “Done”, then press
[OK].
8. Use [K/L/s/B] to select “Continue”, then press
[OK].
9. Use [K/L] to select “Yes” or “No” for proxy server,
then press [OK].
• If you use proxy server, select “Yes” to go to the
next step.
• If you do not use proxy server, select “No” to go to
step 13.
10. “Proxy Address” setting screen will appear. Enter
proxy address with cursor buttons, number buttons
and color key.
11. Press [Red] to go to the “Proxy Port” setting screen.
Enter proxy port number with number buttons.
12. Use [K/L/s/B] to select “Done”, then press
[OK].
13. Connection speed setting screen will appear. Use
[K/L] to select the desired setting, then press [OK].
(The default setting is “Auto”.)
14. BD-Live™ setting screen will appear. Use [K/L] to
select the desired setting, then press [OK].
(The default setting is “Allow”.)
“Allow”:
Internet access is permitted for all BD-Live™ contents.
“Limited Allow”:
Internet access is permitted only for BD-Live™
contents which have content owner certificates.
Internet access without the certificates is prohibited.
“Prohibit”:
Internet access is prohibited for all BD-Live™ contents.
15. Connection test confirmation screen will appear. Select
“Yes” to start the connection test and the test result
will appear right after the connection test finishes.
16. Press [OK] to go back to the setup menu, or press
[(home)] to exit.
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
Please enter your
network settings.
Continue
Cancel
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
http://xxxxx.xx.xx
a/A/@
Proxy Address
Please input the Proxy Address with keypad or software keyboard.
Done Cancel Clear
[K/L/s/B]:Move the highlight.
[the Number buttons] :Enter numbers or letters.
[OK] : Enter the highlighted number /
letter.
*[Red] : Set the entered number or
letter.
[Green] : Cancel the network setting.
*[Blue] : Clear the entered number or
letter.
[Yellow] : Switch between abc, ABC and
@!?.
* These buttons can be used in other network settings.
xxxxxx
Proxy Port
Please input the Proxy Port.
Cancel Clear Done
E5WA0UD_EN_v3.book Page 45 Thursday, March 24, 2011 1:43 PM
EN - 46
DNote for “IP Address”, “Subnet Mask”,
“Default Gateway”, “Primary DNS” and
“Secondary DNS”
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will
automatically be reset to 255.
• When you enter a wrong number, select “Clear” to
clear. (The number will be reset back to “0”.)
• If you want to enter a 1 or 2-digit number in one cell,
press [B] to move on to the next cell.
DNote for “Proxy Address” and “Proxy Port”
• The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, certain ports might be closed, blocked
or unusable depending on your network environment.
• Choose a connection speed in accordance with your
network environment.
• When the settings are changed, the network
connection may be disabled depending on the device.
䡲Wireless
If you connect this unit to the network wirelessly, select
“Wireless” and set up necessary settings.
Please make a note of your Wi-Fi network name (SSID) and
its WEP / WPA key before proceeding with the setup.
Auto Scan
Search for Wi-Fi networks automatically and select the Wi-
Fi network name (SSID) from the list.
1. Follow steps 1 to 2 in “Auto Setup” on page 44.
2. Use [K/L] to select “Wireless”, then press [OK].
3. Use [K/L] to select “Auto Scan”, then press [OK].
• This unit will start searching for Wi-Fi networks
automatically.
4. The result of Wi-Fi network searching will be displayed.
Use [K/L] to select the appropriate Wi-Fi network
name (SSID), then press [OK].
• If you select an SSID without “ ”, please go to step
6.
5. “Access Point Setting (Auto Scan)” screen will appear.
Enter the WEP / WPA key of the selected Wi-Fi
network using cursor buttons, number buttons and
color key, then press [Red].
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.
6. Use [K/L] to select “Continue”, then press [OK].
7. Use [K/L] to select “Auto Setup” or “Manual Setup”,
then press [OK].
• If you select “Auto Setup”, follow step 5 in “Auto
Setup” on page 44.
• If you select “Manual Setup”, follow steps 3 to 12 and
14 to 16 in “Manual Setup” on page 44.
DNote
• The internal wireless LAN supports following
specifications
Please select the
access point.
Rescan
Cancel
Access 1
Access 2
Access 3
Access 4
Access 5
Access 6
Access 7
- Wi-Fi standards : IEEE 802.11 b/g/n
- Frequency spectrum : 2.4 GHz
- Security protocol : WEP / WPA / WPA2
XXXXXXXXXX
a/A/@
Access Point Setting (Auto Scan)
Please input the WEP/WPA key with keypad or software keyboard.
Done Cancel Clear
Please confirm the
setting.
Rescan
Continue
Cancel
SSID Access 1
Security WPA-PSK(AES)
WEP/WPA Key XXXXXXXXXX
E5WA0UD_EN_v3.book Page 46 Thursday, March 24, 2011 1:43 PM
EN
EN - 47
Manual Entry
Set up the connection to the Wi-Fi network manually by
entering the Wi-Fi network name (SSID).
1. Follow steps 1 to 2 in “Auto Scan” on page 46.
2. Use [K/L] to select “Manual Entry”, then press
[OK].
3. “Access Point Setting (Manual Entry)” screen will
appear.
Enter the SSID using cursor buttons, number buttons
and color key, then press [Red].
4. Security mode selection screen will appear. Select the
security mode of the entered SSID, then press [OK].
• If you select “None”, please go to step 6.
5. “Access Point Setting (Manual Entry)” screen will
appear.
Enter the WEP / WPA key of the Wi-Fi network using
cursor buttons, number buttons and color key, then
press [Red].
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.
6. Use [K/L] to select “Continue”, then press [OK].
7. Use [K/L] to select “Auto Setup” or “Manual Setup”,
then press [OK].
• If you select “Auto Setup”, follow step 5 in “Auto
Setup” on page 44.
• If you select “Manual Setup”, follow steps 3 to 12 and
14 to 16 in “Manual Setup” on page 44.
Easy Connect
You can set up the Wi-Fi connection quickly.
(“Easy Connect” is available only when your router
supports it. For details, please refer to the user manual of
your Wi-Fi router.)
Push Button Method
Please confirm your Wi-Fi router has a PBC button.
1. Follow steps 1 to 2 in “Auto Scan” on page 46.
2. Use [K/L] to select “Easy Connect”, then press
[OK].
3. Use [K/L] to select “Push Button Method”, then
press [OK]. And push the PBC (Push Button
Configuration) on your Wi-Fi router.
• The unit will start the connection test automatically
and the test result will appear right after the
connection test finishes.
4. Select “Finish” to complete the settings.
PIN Code Method
1. Follow steps 1 to 2 in “Auto Scan” on page 46.
2. Use [K/L] to select “Easy Connect”, then press
[OK].
3. Set up your Wi-Fi router with PIN code shown on the
TV screen.
• For details about setting method of your Wi-Fi
router, please refer to the user manual of the router.
4. Use [K/L] to select “PIN Code Method”, then press
[OK].
5. The unit will start the connection test automatically and
the test result will appear right after the connection
test finishes.
6. Select “Finish” to complete the settings.
Please select the
security mode.
Cancel
None
WEP
WPA-PSK(TKIP)
WPA-PSK(AES)
WPA2-PSK(TKIP)
WPA2-PSK(AES)
Please push the PBC(push button
configuration) on the wireless router
and select ‘Push Button Method’
button on screen.
Please input the PIN number into
the wireless router and select ‘PIN
Code Method’ button on screen.
65729403
PIN Code Method
Cancel
Push Button Method
E5WA0UD_EN_v3.book Page 47 Thursday, March 24, 2011 1:43 PM
EN - 48
䡲View Network Settings / View Wireless Settings
You can check the current status of network settings or
Wi-Fi settings.
1. Follow steps 1 to 2 in “Connection Test” on page 43.
2. Use [K/L] to select “View Network Settings” or
“View Wireless Settings”, then press [OK].
• The current network settings or Wi-Fi settings will
be displayed.
3. Press [(home)] to exit.
䡲Netflix ESN
You can view the ESN number which is a serial number
used by Netflix to identify a device. Netflix customer
service might ask you for this number during
troubleshooting.
1. Follow steps 1 to 2 in “Connection Test” on page 43.
2. Use [K/L] to select “Netflix ESN”, then press [OK].
3. Press [(home)] to exit.
12.4. EasyLink Setup
This unit supports Philips EasyLink, which enables your TV
(limited to Philips brand EasyLink TV) to act in conjunction
with this unit, or vice versa. Compliant TV must be
connected to the HDMI OUT jack.
When “EasyLink” setting is set to “On”, functions listed
below will be available.
One Touch Play
When the operations with following buttons of the remote
control of this unit are performed, the TV will automatically
be turned on and switched to the appropriate input
channel. (“One Touch Play” can be turned off by setting it
to “Off”.)
Buttons for one touch play:
- [B(play)], [S(previous)], [T(next)],
[the Number buttons], [(home)], or
[Net-TV]
-
[TOP MENU]
, or
[DISC MENU / POP-UP MENU]
(when a disc is inserted in the unit)
One Touch Standby
When you press and hold [Q(standby/on)] for 2
seconds, it turns off the power of the TV first and then it
turns off the power on this unit. When the connected
EasyLink compatible display device is turned off first, it then
turn off the power on this unit. (“One Touch Standby” can
be turned off by setting it to “Off”.)
System Information
Get & Set Menu Language
The unit recognizes the OSD language set of the TV and
automatically sets the same language as the player menu
language (OSD menu language) for this unit. Refer to the
“Menu Language” on page 40 for available languages.
• This feature is available only when “Auto (XXXX)” is
selected in the “Menu Language” in the setup menu.
12.5. Parental Control
Some BD-videos or DVD-videos feature parental lock
levels. Playback will stop if the ratings exceed the levels you
set, it will require you to enter a password before the disc
will play back. This feature prevents your children from
viewing inappropriate material.
1. Use [K/L/s/B] to select “Setup” in the home
menu, then press [OK].
2. Use [K/L] to select “Preference Setup”, then press
[OK].
3. Use [K/L] to select “Parental Control”, then press
[OK].
(home) A“Setup” A“EasyLink Setup”
(home) A“Setup” A“Preference
Setup” A“Parental
Control”
E5WA0UD_EN_v3.book Page 48 Thursday, March 24, 2011 1:43 PM
EN
EN - 49
For the first time only :
Use [the Number buttons] to enter any 4-digit
number (except for 4737). That number will be used as
the password. Record your password, in case you
forget it.
• If you forget the password, enter [4], [7], [3], [7].
The password will be cleared and rating level will be
set to “Off”.
• While you input the password, select “Clear” to
clear the number, then re-enter the password.
Once a password is set :
Use [the Number buttons] to enter your 4-digit
password.
4. Use [K/L] to select your desired parental lock level,
then press [OK].
5. Press [(home)] to exit.
To cancel parental lock temporarily :
Some discs allow you to cancel parental lock temporarily.
With these discs, the message below will appear when you
try to play them back.
“Enter current password.”
Follow the instruction which appears on the TV screen to
cancel parental lock. After entering the password, “Parental
Control” appears. Select desired parental lock level, then
press [OK].
䡲Change Password
1. Follow steps 1 to 2 in “Parental Control” on page 48.
2. Use [K/L] to select “Change Password”, then press
[OK].
3. Use [the Number buttons] to enter your 4-digit
password.
4. Use [the Number buttons] to enter a new 4-digit
password.
5. Use [the Number buttons] to retype the same new
4-digit password.
6. Use [K/L/s/B] to select “Confirm”, then press
[OK].
7. Press [(home)] to exit.
12.6. Software Update
Philips continuously tries to improve its products and we
strongly recommend that you update the software when
updates are available. New software can be downloaded
from our website at www.philips.com/support using the
model number of your Blu-ray Disc™ Player (e.g.
BDP5506) to find information.
䡲Disc / USB Update
You can update the software by using a disc or USB storage
device.
1. Use [K/L/s/B] to select “Setup” in the home
menu, then press [OK].
2. Use [K/L] to select “Advanced Setup”, then press
[OK].
3. Use [K/L] to select “Software Update”, then press
[OK].
4. Use [K/L] to select “Disc” or “USB”, then press
[OK].
5. Use [s/B] to select “Yes”, then press [OK].
6. Insert the disc or USB storage device for software
update.
7. After loading the disc or USB storage device,
confirmation message will appear. Select “Yes” and
press [OK] to start updating.
• It may take a while to complete the update.
8. After the update finishes, this unit will restart. Remove
the disc or USB storage device from the unit.
CCaution
• Please do not disconnect the AC power cord or USB
storage device while executing the “Disc” or “USB”
update.
RATING EXPLANATIONS
Off • Parental control is inactive; all discs
can play back.
8 [Adult] • DVD software of any grades
(adult / general / children) can be
played back.
7 [NC-17] • No one under 17.
6 [R] • Restricted; under 17.
5 [PGR] • Parental Guidance Recommended.
4 [PG-13] • Unsuitable for children under 13.
3 [PG] • Parental Guidance suggested.
2 [G] • General Audience.
1 [Kid Safe] • Suitable for children.
(home) A“Setup” A“Advanced
Setup” A“Software
Update”
E5WA0UD_EN_v3.book Page 49 Thursday, March 24, 2011 1:43 PM
EN - 50
DNote
•Please visit www.philips.com/support to download
the latest software version. Please read the software
update Read-me file carefully before performing an
update using a disc or USB storage device.
• All settings will remain the same even if you update the
software version.
• The version of Netflix will also be updated if newer
version of Netflix is available when updating the
software.
䡲Network Update
You can update the software by connecting the unit to the
Internet.
1. Follow steps 1 to 3 in “Disc / USB Update” on page 49.
2. Use [K/L] to select “Network”, then press [OK].
3. Use [s/B] to select “Yes”, then press [OK].
• This unit will then start checking for the latest
software version.
4. Confirmation message will appear. Select “Yes”, then
press [OK].
• The unit will start downloading the latest software
version.
5. When the download completes, confirmation message
will appear. Press [OK].
• The unit will start updating the software version.
• It may take a while to complete the update.
6. After updating finishes, this unit will restart
automatically.
CCaution
• Please do not unplug the AC power cord or LAN cable
while executing the “Network” update.
DNote
• In order to update the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.
• For the network connection, refer to “Connection to
the Network” on page 20.
• For the network setup, refer to “Network Installation”
on page 43.
• All settings will remain the same even if you update the
software version.
• The version of Netflix will also be updated if newer
version of Netflix is available when updating the
software.
12.7. Restore Default Settings
Menus to reset player settings, format USB storage device,
local storage and clear network settings.
1. Use [K/L/s/B] to select “Setup” in the home
menu, then press [OK].
2. Use [K/L] to select “Advanced Setup”, then press
[OK].
3. Use [K/L] to select “Restore default settings”, then
press [OK].
4. Use [K/L] to select the desired setting, then press
[OK].
“Reset Settings” :
All the settings except for the “Parental Control” and
“Network Installation” setting will be reset to default.
“Format USB” (Available only when a USB
storage device is connected):
Initialize the USB storage device.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, on this player.
“(USB) Erase Saved BD-ROM Data” (Available
only when a USB storage device is connected):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the USB storage
device.
“Reset Network Settings”:
Reset the network setting to the default.
5. Use [s/B] to select “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
6. Press [(home)] to exit.
CCaution
• Do not remove the USB storage device while executing
the “Format USB” or “(USB) Erase Saved BD-ROM
Data”. It will damage the USB storage device.
DNote
• “Format USB” and “(USB) Erase Saved BD-ROM Data”
are not available when a Blu-ray Disc™ is in the unit.
(home) A“Setup” A“Advanced
Setup” A“Restore default
settings”
E5WA0UD_EN_v3.book Page 50 Thursday, March 24, 2011 1:43 PM
EN
EN - 51
13. TROUBLESHOOTING
Problem Tip
No reaction to the remote control. Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries with the correct polarity.
Insert new batteries in the remote control.
No video signal on the display
device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI] .
Touch and hold [B(play)] on the front panel for 5 seconds to change the setting
back to its default.
No audio / video signal on the
display device via HDMI cable.
If the unit is connected to the unauthorized display device with an HDMI cable, the
audio / video signal may not be output.
Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the
TV and this unit and then reconnect it to both the devices while they are powered
on.
Ensure that your HDMI cable is certified.
No high-definition video signal on
the TV screen.
Does the disc contain high-definition video? High-definition video is not available
when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not available
when the TV does not support it.
No 3D video on the TV screen. Check if your TV is 3D capable.
Use a 3D compatible HDMI cable to connect the 3D capable TV.
Set “3D Output” to “Auto (XX)”. (Refer to page 39.)
Wear 3D glasses and make sure they are switched on and in sync with your TV.
Check the battery levels of your glasses.
Refer to your 3D TV's user manual for more information.
No audio signal from the
loudspeakers of the TV screen.
Assign the audio input of the TV to the corresponding video input.
Ensure that the TV's speakers are turned on in the TV menu.
Ensure that the TV's speakers are not muted.
No audio signal from the
loudspeakers of the audio system.
Turn on the audio system.
Set the audio system to the correct external audio input.
Increase the volume level of the audio system.
Cannot play back a disc. Make sure that the product supports the disc.
Check the region code of the disc. This unit supports following region codes.
- Blu-ray Disc™ :“A”
- DVD :“ALL” or “1” for BDP5506/F7 (USA / Canada)
“ALL” or “4” for BDP5506/F8 (Mexico)
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
USB storage device cannot be read. The format of the device is not accepted by this unit or the device is not compatible.
Cannot play back JPEG files from a
disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Cannot play back MP3 files from a
disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.
Cannot play back Windows
Media™ Audio files from a disc.
Make sure that the sample rate of the Windows Media™ Audio files is
44.1 kHz or 48 kHz.
E5WA0UD_EN_v3.book Page 51 Thursday, March 24, 2011 1:43 PM
EN - 52
Problem Tip
in the upper right hand corner
of the TV screen.
The operation is not possible.
Buttons do not work or the unit
stops responding.
To completely reset the unit, touch and hold [Q(standby/on)] on the front panel
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for
5-10 seconds.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than 9,999 files
for Blu-ray Disc™ / DVD / USB storage device, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find an MP3 and
Windows Media™ Audio file.
Make sure that the selected folder does not contain more than 9,999 files for Blu-ray
Disc™ / DVD / USB storage device, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA for
Windows Media™ Audio.
Cannot play back AVCHD file. This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t) written
to a DVD. The DVD containing AVCHD files must have a proper file and folder
structure meeting AVCHD format specifications.
Please use AVCHD compliant device / software to burn or copy AVCHD files to
DVD. (Please refer to user manuals of the device / software for more information.)
Error message appears when I select
“Auto” in the “Menu Language”.
Make sure that the unit is connected to the Philips brand EasyLink TV and the
“EasyLink” is set to “On”.
This error message may appear when your TV’s OSD language is not supported by
this unit.
Cannot connect to the network. Check if the network connection is properly made.
Turn on the modem or router.
Check the network settings.
Check if the router and/or modem is correctly connected.
Check the BD-Live™ setting in “Manual Setup” on page 44.
When connecting directly to a modem via a LAN cable, you might need to power
cycle the modem to reset settings on the modem.
E5WA0UD_EN_v3.book Page 52 Thursday, March 24, 2011 1:43 PM
EN
EN - 53
Problem Tip
Cannot use the Wi-Fi connection. Once you have activated the Wi-Fi connection please wait for 30 seconds for the
connection to be established after turning on the unit, before trying to access
network features such as BD-Live™, Netflix, Film Fresh, Blockbuster, VUDU or
Pandora.
Cannot get into the PC's screen
after “MediaConnect” is selected.
The startup screen (Philips logo with spinning circle) keep displaying until the unit
found the PC that is running Philips Wireless MediaConnect.
Make sure if the network connection is connected properly.
Check if your PC runs Philips Wireless MediaConnect.
Make sure this unit and PC are connected on the same network.
I have a 1.8GHz CPU but
MediaConnect does not work on
my PC.
For smooth operation of your PC while Philips MediaConnect is running you need a
mainstream dual core processor from Intel or AMD.
Intel: Core2Duo or Core i3/5/7 @ 1.8GHz or higher.
AMD: Athlon II X2, Turion II Dual-Core or Phenom X2 @ 2GHz or higher.
Cannot connect to the network
while my PC is connected to the
network.
Check the content of your Internet service contract to see if your Internet Service
Provider prevents multiple terminals connecting at the same time.
The capacity of the USB storage
device decreased.
Data may be written to the USB storage device when a BD-video that supports the
virtual package is used and a USB storage device is connected.
MPEG-2 video and audio on the
USB storage device cannot be
played back.
MPEG-2 is noncompliant on this unit.
The contents of the USB storage
device cannot be read.
The USB storage device is not compatible or the contents on the USB storage device
may be damaged.
Turn off and then turn the unit on again.
Cannot use the BD-Live™ function
or download of data does not
perform properly.
Insert a USB storage device with enough capacity (1GB or more).
Check if a USB storage device is correctly inserted.
Cannot play back BD-video (BD-
ROM Profile 2.0).
Insert a USB storage device (1GB or more) which is formatted on this unit. Some
discs with BD-Live™ function require memory when playing back the content.
Do not remove the USB storage device during playback.
E5WA0UD_EN_v3.book Page 53 Thursday, March 24, 2011 1:43 PM
EN - 54
13.1. Downloading an Electronic Copy
To obtain an electronic copy of this manual :
1. Point your browser to www.philips.com/support
2. Choose your country of location.
3. Enter the model number or a keyword in the “Find your product” field. Alternatively, you can browse the catalog.
4. Click the description or model.
5. Under Product support, click
“User manuals”
.
13.2. Contact Us
• If you cannot resolve your problem, refer to the FAQ for this Blu-ray Disc™ Player at www.philips.com/support
If the problem remains unresolved, contact the Customer Support Center in your country.
DNote
• Do not attempt to repair the Blu-ray Disc™ Player yourself. This may cause severe injury, irreparable damage to your
Blu-ray Disc™ Player or void your warranty.
• Please have your Blu-ray Disc™ Player model and serial number available before contacting us.
These numbers are available on the cabinet, as well as on the packaging.
E5WA0UD_EN_v3.book Page 54 Thursday, March 24, 2011 1:43 PM
EN
EN - 55
14. GLOSSARY
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as its height).
AVCHD
AVCHD is a new format for high definition video
camcorders which can record and play high-resolution HD
images.
BD-Live™
BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0)
which contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW™ function.
Blockbuster
Blockbuster is online service which you can rent or
purchase movies and TV episodes streamed over the
Internet.
Blockbuster is available only in the United States.
Blu-ray Disc™
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an analog
signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.
DNS Server
A server which translates Internet domain names into IP
addresses.
Dolby Digital
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multi-
channel audio.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc™ supports
7.1 multi-channel surround sound output.
DTS® (Digital Theater System)
DTS® is a multi channel surround sound system. You can
enjoy movie dynamic and realistic sound like movie theater.
DTS surround sound technologies were developed by DTS,
Inc.
DTS-HD®
DTS-HD® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc™ supports 7.1 multi-channel surround sound
output.
Film Fresh
Film Fresh is online service which you can rent or purchase
movies and TV episodes streamed over the Internet.
Film Fresh is available only in the United States.
E5WA0UD_EN_v3.book Page 55 Thursday, March 24, 2011 1:43 PM
EN - 56
Gateway
IP address of the electronic devices (such as router) which
provide Internet access.
HDMI (High-Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Hub
A device used for connecting multiple device to the
network.
IP Address
A set of numbers which are assigned to devices
participating in a computer network.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or
USB storage device from a computer and play back the files
on this unit.
LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.
Local Storage
A storage area of sub contents for playing virtual packages
on BD-video.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or USB
storage device from the computer and play back the files on
this unit.
Netflix
Netflix is online movie rental service, offering online
streaming to customers in the United States.
Pandora
Pandora is the personalized Internet radio service.
You can instantly listen to personalized radio stations
streamed over the Internet from Pandora.
Pandora is available only in the United States.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio, found
on CD and DAT. Excellent quality, but requires a lot of
data compared to formats such as Dolby Digital and MPEG
audio. For compatibility with digital audio recorders (CD,
MD and DAT) and AV amplifiers with digital inputs, this
unit can convert Dolby Digital, DTS, and MPEG audio to
PCM. See also “Digital Audio”.
Proxy Server
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
Region Code
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
Sampling Frequency
The rate which sound is measured by a specified interval to
turn into digital audio data. The numbers of sampling in one
second defines as sampling frequency. The higher the rate,
the better the sound quality.
Subnet Mask
A mask which is used to determine what subnet an IP
address belongs to.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
E5WA0UD_EN_v3.book Page 56 Thursday, March 24, 2011 1:43 PM
EN
EN - 57
Track
Audio CD uses tracks to divide up the content of a disc.
The BD-video or DVD-video equivalent is called a chapter.
See also “Chapter”.
Virtual Package
The function which copies data to other media (local
storage) from the Internet and plays secondary video,
secondary audio and subtitles at the same time. The
method of the playback varies depending on discs.
VUDU
VUDU is a leading HD on-demand video service which
utilizes the Internet connection to deliver the highest
quality on-demand video and Internet applications.
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R,
CD-RW/-R, or USB storage device from a computer and
play them back on this unit.
x.v.Color
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based on
the xvYCC specifications and is a trademark of Sony
Corporation.
E5WA0UD_EN_v3.book Page 57 Thursday, March 24, 2011 1:43 PM
EN - 58
15. LANGUAGE CODE LIST
DNote
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time
you change the subtitle language setting on page 33 or audio language setting on page 34. If you choose any other
languages, “---” will be displayed instead.
Language Code Language Code Language Code Language Code
A-B French [FRE] 5264 Macedonian 5957 Siswat 6565
Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SLO] 6557
Afar 4747 Galician 5358 Malay 5965 Slovenian 6558
Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali 6561
Albanian 6563 German [GER] 5051 Maltese 5966 Spanish [SPA] 5165
Amharic 4759 Greek [GRE] 5158 Maori 5955 Sundanese 6567
Arabic 4764 Greenlandic 5758 Marathi 5964 Swahili 6569
Armenian 5471 Guarani 5360 Moldavian 5961 Swedish [SWE] 6568
Assamese 4765 Gujarati 5367 Mongolian 5960 T
Aymara 4771 Hausa 5447 Nauru 6047 Tagalog 6658
Azerbaijani 4772 Hebrew 5569 Nepali 6051 Tajik 6653
Bashkir 4847 Hindi 5455 Norwegian [NOR] 6061 Tamil 6647
Basque 5167 Hungarian [HUN] 5467 O-R Tatar 6666
Bengali;Bangla 4860 I-K Occitan 6149 Telugu 6651
Bhutani 5072 Icelandic [ICE] 5565 Oriya 6164 Thai 6654
Bihari 4854 Indonesian 5560 Oromo (Afan) 6159 Tibetan 4861
Bislama 4855 Interlingua 5547 Panjabi 6247 Tigrinya 6655
Breton 4864 Interlingue 5551 Pashto;Pushto 6265 Tonga 6661
Bulgarian [BUL] 4853 Inupiak 5557 Persian 5247 Tsonga 6665
Burmese 5971 Irish [GLE] 5347 Polish [POL] 6258 Turkish [TUR] 6664
Byelorussian 4851 Italian [ITA] 5566 Portuguese [POR] 6266 Turkmen 6657
C-E Japanese [JPN] 5647 Quechua 6367 Twi 6669
Cambodian 5759 Javanese 5669 Rhaeto-Romance 6459 U-Z
Catalan 4947 Kannada 5760 Romanian [RUM] 6461 Ukrainian 6757
Chinese [CHI] 7254 Kashmiri 5765 Russian [RUS] 6467 Urdu 6764
Corsican 4961 Kazakh 5757 SUzbek 6772
Croatian 5464 Kinyarwanda 6469 Samoan 6559 Vietnamese 6855
Czech [CZE] 4965 Kirghiz 5771 Sangho 6553 Volapuk 6861
Danish [DAN] 5047 Kirundi 6460 Sanskrit 6547 Welsh 4971
Dutch [DUT] 6058 Korean [KOR] 5761 Scots Gaelic 5350 Wolof 6961
English [ENG] 5160 Kurdish 5767 Serbian 6564 Xhosa 7054
Esperanto 5161 L-N Serbo-Croatian 6554 Yiddish 5655
Estonian 5166 Laothian 5861 Sesotho 6566 Yoruba 7161
F-H Latin 5847 Setswana 6660 Zulu 7267
Faroese 5261 Latvian;Lettish 5868 Shona 6560
Fiji 5256 Lingala 5860 Sindhi 6550
Finnish [FIN] 5255 Lithuanian 5866 Singhalese 6555
E5WA0UD_EN_v3.book Page 58 Thursday, March 24, 2011 1:43 PM
EN
EN - 59
16. SPECIFICATIONS
DNote
• The specifications and design of this product are subject to change without notice.
General
Signal System NTSC Color
Power requirements 120 V AC, 60 Hz
Power consumption 20 W (standby: 0.5 W)
Dimensions (width x height x depth) 17.2 x 1.6 x 8.5 inches (435 x 38.9 x 213.85 mm)
Weight 4.4 lbs. (2.0 kg)
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80 % (no condensation)
Terminals
USB input
TYPE A USB 2.0
Bus power current: MAX. 500mA
Audio output (Analog)
RCA jack x 2 L/R: 2 Vrms (output impedance: more than 1k)
Video output
RCA jack x 1 1 Vp-p (75)
Audio output (Digital)
RCA jack x 1 500 mVp-p (75)
HDMI output
HDMI jack x 1 Video: 480p, 720p, 1080i, 1080p, 1080p24/Audio
LAN terminal 10BASE-T / 100BASE-TX
Wireless LAN (Internal) IEEE 802.11 b/g/n
E5WA0UD_EN_v3.book Page 59 Thursday, March 24, 2011 1:43 PM
EN - 60
17. IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D TELEVISIONS
Read the following information before viewing 3D television images.
Ambient fluorescent lighting may cause a flickering effect and direct sunlight
may adversely affect the operation of your 3D glasses.
1.
DO NOT place your television near open stairwells, balconies or other objects as
viewing in 3D images may cause disorientation for some viewers resulting in falls,
tripping or walking into objects.
2.
If you experience (1) altered vision; (2) lightheadedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of
awareness; (8) convulsions; (9) cramps; and/or (10) disorientation, immediately stop
watching 3D images and consult your doctor.
3.
Parents should regularly monitor their children concerning the above symptoms
as children and teenagers may be more likely to experience these symptoms more
frequently than adults. Watching 3D television is not recommended for children
under the age of 6 as their visual system is not yet fully developed.
4.
Prolonged viewing of 3D images might cause discomfort, dizziness, eye strain,
headaches or disorientation.
5.
CAUTION NOTICE:
Some viewers may experience an epileptic seizure or stroke when exposed to
certain flashing images or lights contained in certain television pictures or video
games. If you or any of your family has a history of epilepsy or stroke, please
consult your doctor before viewing 3D images.
1.
DO NOT watch 3D television if you are pregnant, elderly, sleep-deprived, suffering
from serious medical conditions, in poor physical condition or under the influence
of alcohol.
2.
Sitting too close to the screen for an extended period of time may damage your
eyesight. The ideal distance should be at least three times the height of the TV screen
and at the viewer's eyes level.
3.
Wearing the 3D glasses for any reason other than viewing 3D television (as general
spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken
your eyesight.
4.
If you experience any discomfort while viewing 3D images, stop and do not
immediately engage in any potentially hazardous activity such as driving a car
until your symptoms have disappeared. If your symptoms persist, do not resume
watching 3D images without consulting your doctor.
5.
WARNING NOTICE:
E5WA0UD_EN_v3.book Page 60 Thursday, March 24, 2011 1:43 PM
EN
EN - 61
18. ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•Shipping charges to return defective product.
•Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
•Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•Damage or claims for products not being available for use, or
for lost data or lost software.
•Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•Product lost in shipment and no signature verification receipt
can be provided.
•Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
1-866-309-0866
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
E5WA0UD_EN_v3.book Page 61 Thursday, March 24, 2011 1:43 PM
L
ICENS
E
This section describes software license used for this product.
This product uses some open source software:
GPL software: linux, module-init-tools, mount, nettools, sash, Realtek WiFi driver
LGPL software: directfb, glibc, Qt, live555
BSD: WPA Supplicant
MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2
MIT/X: cURL
XML-RPC FOR C/C++ license: xmlrpc
gSOAP Public License: gSOAP
Free Type, LibJPEG, Open SSL, Vera Fonts
G
P
L
G
NU General Public License (GPL)
V
ersion 2, June 199
1
C
opyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth
F
loor
,
Boston
,
MA 02110-1301
,
US
A
Ever
y
one is
p
ermitted to co
py
and distribute verbatim co
p
ies of this license docu-
ment,
b
ut c
h
ang
i
ng
i
t
i
s not a
ll
owe
d.
P
ream
bl
e
T
he licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public License is intended to guaran-
t
ee
y
our freedom to share and chan
g
e free software--to make sure the software
i
s free for all its users. This General Public License applies to most of the Free Soft-
ware Foundation's software and to any other program whose authors commit to
usin
g
it.
(
Some other Free Software Foundation software is covered b
y
the GNU
Lesser General Public License instead.) You can apply it to your programs, too
.
When we s
p
eak of free software, we are referrin
g
to freedom, not
p
rice. Ou
r
G
eneral Public Licenses are desi
g
ned to make sure that
y
ou have the freedom to
d
istribute copies of free software (and charge for this service if you wish), that you
receive source code or can
g
et it if
y
ou want it, that
y
ou can chan
g
e the software
or use
p
ieces of it in new free
p
ro
g
rams; and that
y
ou know
y
ou can do these
thi
ngs
.
T
o
p
rotect
y
our ri
g
hts, we need to make restrictions that forbid an
y
one to den
y
y
ou t
h
ese r
i
g
h
ts or to as
k
you to surren
d
er t
h
e r
i
g
h
ts.
Th
ese restr
i
ct
i
ons trans
l
ate
t
o certain res
p
onsibilities for
y
ou if
y
ou distribute co
p
ies of the software, or if
y
ou
modif
y
it
.
F
or example, if you distribute copies of such a program, whether gratis or for a
fee,
y
ou must
g
ive the reci
p
ients all the ri
g
hts that
y
ou have. You must make sure
t
hat the
y
, too, receive or can
g
et the source code. And
y
ou must show them these
t
erms so t
h
ey
k
now t
h
e
i
r r
i
g
h
ts
.
We
p
rotect
y
our ri
g
hts with two ste
p
s:
(
1
)
co
py
ri
g
ht the software, and
(
2
)
offe
r
y
ou this license which
g
ives
y
ou le
g
al
p
ermission to co
py
, distribute and/or modif
y
t
he software
.
A
lso, for each author's
p
rotection and ours, we want to make certain that ever
y
-
one understands that there is no warranty for this free software. If the software is
modifi ed b
y
someone else and
p
assed on, we want its reci
p
ients to know that what
th
e
y
h
ave
i
s not t
h
e or
igi
na
l
, so t
h
at an
y
p
ro
bl
ems
i
ntro
d
uce
d
by
ot
h
ers w
ill
not
refl ect on the original authors' reputations
.
F
inall
y
, an
y
free
p
ro
g
ram is threatened constantl
y
b
y
software
p
atents. We wish to
avoid the dan
g
er that redistributors of a free
p
ro
g
ram will individuall
y
obtain
p
atent
l
icenses, in effect making the program proprietary. To prevent this, we have made it
clear that an
y
p
atent must be licensed for ever
y
one's free use or not licensed at all
.
T
he
p
recise terms and conditions for co
py
in
g
, distribution and modifi cation follow
.
T
ERMS AND CONDITIONS FOR COPYING
,
DISTRIBUTION AND MODIFICA-
T
IO
N
0. This License applies to any program or other work which contains a notice
p
laced b
y
the co
py
ri
g
ht holder sa
y
in
g
it ma
y
be distributed under the terms o
f
t
his General Public License. The "Pro
g
ram", below, refers to an
y
such
p
ro
g
ram
or work, and a
"
work based on the Program
"
means either the Program or any
d
er
i
vat
i
ve wor
k
un
d
er co
py
r
igh
t
l
aw: t
h
at
i
s to sa
y
, a wor
k
conta
i
n
i
n
g
t
h
e
P
ro
g
ram
or a portion of it, either verbatim or with modifi cations and/or translated into
another language. (Hereinafter, translation is included without limitation in the
t
erm "modifi cation".
)
Each licensee is addressed as "
y
ou"
.
A
ctivities other than copying, distribution and modifi cation are not covered by this
License; they are outside its scope. The act of running the Program is not restricted
,
and the output from the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by running the Program)
.
Wh
et
h
er t
h
at
i
s true
d
epen
d
s on w
h
at t
h
e
P
rogram
d
oes
.
1
. You may copy and distribute verbatim copies of the Program's source code as
y
ou rece
i
ve
i
t,
i
n any me
di
um, prov
id
e
d
t
h
at you consp
i
cuous
l
y an
d
appropr
i
ate
l
y
p
ublish on each co
py
an a
pp
ro
p
riate co
py
ri
g
ht notice and disclaimer of warrant
y;
keep intact all the notices that refer to this License and to the absence of any
w
arranty; and give any other recipients of the Program a copy of this License
a
l
on
g
w
i
t
h
t
h
e
P
ro
g
ram
.
You may charge a fee for the physical act of transferring a copy, and you may at
y
our option offer warranty protection in exchange for a fee
.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifi ca-
t
ions or work under the terms of Section 1 above, provided that you also meet
all of these conditions
:
a) You must cause the modifi ed fi les to carry prominent notices stating that you
chan
g
ed the fi les and the date of an
y
chan
g
e
.
b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a
whole at no char
g
e to all third
p
arties under the terms of this License
.
c) If the modifi ed program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most ordinary
way, to pr
i
nt or
di
sp
l
ay an announcement
i
nc
l
u
di
ng an appropr
i
ate copyr
i
g
h
t
notice and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions
,
and telling the user how to view a copy of this License. (Exception: if the Pro-
gram itself is interactive but does not normally print such an announcement, you
r
work based on the Program is not required to print an announcement.)
T
hese requirements apply to the modifi ed work as a whole. If identifi able sections
o
f that work are not derived from the Program, and can be reasonably considered
i
n
d
epen
d
ent an
d
separate wor
k
s
i
n t
h
emse
l
ves, t
h
en t
hi
s
Li
cense, an
d
i
ts terms,
d
o
not a
pply
to t
h
ose sect
i
ons w
h
en
y
ou
di
str
ib
ute t
h
em as se
p
arate wor
k
s.
B
ut w
h
en
y
ou distribute the same sections as
p
art of a whole which is a work based on the
P
ro
g
ram, the distribution of the whole must be on the terms of this License, whose
p
ermissions for other licensees extend to the entire whole, and thus to each and
ever
y
p
art re
g
ardless of who wrote it
.
T
hus, it is not the intent of this section to claim ri
g
hts or contest
y
our ri
g
hts to
wor
k
wr
i
tten ent
i
re
ly
by
y
ou; rat
h
er, t
h
e
i
ntent
i
s to exerc
i
se t
h
e r
igh
t to contro
l
t
h
e
d
istribution of derivative or collective works based on the Pro
g
ram
.
In addition, mere a
gg
re
g
ation of another work not based on the Pro
g
ram with the
P
ro
g
ram
(
or with a work based on the Pro
g
ram
)
on a volume of a stora
g
e or dis-
t
ribution medium does not brin
g
the other work under the sco
p
e of this License
.
3
. You ma
y
co
py
and distribute the Pro
g
ram
(
or a work based on it, under Section
2
)
in ob
j
ect code or executable form under the terms of Sections 1 and 2 above
p
rovided that
y
ou also do one of the followin
g:
a
)
Accom
p
an
y
it with the com
p
lete corres
p
ondin
g
machine-readable source code
,
which must be distributed under the terms of Sections 1 and 2 above on a
medium customaril
y
used for software interchan
g
e; o
r
,
b
)
Accom
p
an
y
it with a written offer, valid for at least three
y
ears, to
g
ive an
y
third
p
art
y
, for a char
g
e no more than
y
our cost of
p
h
y
sicall
y
p
erformin
g
source
d
istribution, a com
p
lete machine-readable co
py
of the corres
p
ondin
g
source
code
,
to be distributed under the terms of Sections 1 and 2 above on a medium
customaril
y
used for software interchan
g
e; or,
c)
Accom
p
an
y
it with the information
y
ou received as to the offer to distribute
c
orres
p
ondin
g
source code.
(
This alternative is allowed onl
y
for noncommercial
d
istribution and onl
y
if
y
ou received the
p
ro
g
ram in ob
j
ect code or executable
form with such an offer, in accord with Subsection b above.
)
T
he source code for a work means the
p
referred form of the work for makin
g
modifi cations to it. For an executable work, com
p
lete source code means all the
source code for all modules it contains,
p
lus an
y
associated interface defi nition
fi les,
p
lus the scri
p
ts used to control com
p
ilation and installation of the executable
.
H
owever, as a s
p
ec
i
a
l
exce
p
t
i
on, t
h
e source co
d
e
di
str
ib
ute
d
nee
d
not
i
nc
l
u
d
e an
y
-
t
hin
g
that is normall
y
distributed
(
in either source or binar
y
form
)
with the ma
j
o
r
c
om
p
onents
(
com
p
iler, kernel, and so on
)
of the o
p
eratin
g
s
y
stem on which the
executable runs, unless that com
p
onent itself accom
p
anies the executable
.
If distribution of executable or ob
j
ect code is made b
y
offerin
g
access to co
py
from
a desi
g
nated
p
lace, then offerin
g
e
q
uivalent access to co
py
the source code from
t
he same
p
lace counts as distribution of the source code, even thou
g
h third
p
arties
are not com
p
e
ll
e
d
to co
py
t
h
e source a
l
on
g
w
i
t
h
t
h
e o
bj
ect co
d
e
.
4. You ma
y
not co
py
, modif
y
, sublicense, or distribute the Pro
g
ram exce
p
t as
ex
p
ressl
y
p
rovided under this License. An
y
attem
p
t otherwise to co
py
, modif
y,
s
u
bli
cense or
di
str
ib
ute t
h
e
P
ro
g
ram
i
s vo
id
, an
d
w
ill
automat
i
ca
lly
term
i
nate
y
ou
r
r
igh
ts un
d
er t
hi
s
Li
cense.
H
owever,
p
art
i
es w
h
o
h
ave rece
i
ve
d
co
pi
es, or r
igh
ts
,
from
y
ou under this License will not have their licenses terminated so lon
g
as
s
uch
p
arties remain in full com
p
liance
.
5
.
Y
ou are not re
q
u
i
re
d
to acce
p
t t
hi
s
Li
cense, s
i
nce
y
ou
h
ave not s
ig
ne
d
i
t.
H
ow-
ever, nothin
g
else
g
rants
y
ou
p
ermission to modif
y
or distribute the Pro
g
ram o
r
i
ts derivative works. These actions are
p
rohibited b
y
law if
y
ou do not acce
p
t this
License. Therefore, b
y
modif
y
in
g
or distributin
g
the Pro
g
ram
(
or an
y
work based
o
n the Pro
g
ram
)
,
y
ou indicate
y
our acce
p
tance of this License to do so, and all its
t
erms and conditions for co
py
in
g
, distributin
g
or modif
y
in
g
the Pro
g
ram or works
b
ase
d
on
i
t
.
6. Each time
y
ou redistribute the Pro
g
ram
(
or an
y
work based on the Pro
g
ram
),
the reci
p
ient automaticall
y
receives a license from the ori
g
inal licensor to co
py,
d
istribute or modif
y
the Pro
g
ram sub
j
ect to these terms and conditions. You
ma
y
not im
p
ose an
y
further restrictions on the reci
p
ients' exercise of the ri
g
hts
g
ranted herein. You are not res
p
onsible for enforcin
g
com
p
liance b
y
third
p
arties
to t
hi
s
Li
cense
.
7
. If, as a conse
q
uence of a court
j
ud
g
ment or alle
g
ation of
p
atent infrin
g
ement o
r
for an
y
other reason
(
not limited to
p
atent issues
)
, conditions are im
p
osed on
y
ou
(
whether b
y
court order, a
g
reement or otherwise
)
that contradict the conditions
o
f this License, the
y
do not excuse
y
ou from the conditions of this License. If
y
ou
c
annot distribute so as to satisf
y
simultaneousl
y
y
our obli
g
ations under this License
an
d
an
y
ot
h
er
p
ert
i
nent o
blig
at
i
ons, t
h
en as a conse
q
uence
y
ou ma
y
not
di
str
ib
ute
t
he Pro
g
ram at all. For exam
p
le, if a
p
atent license would not
p
ermit ro
y
alt
y
-free
redistribution of the Pro
g
ram b
y
all those who receive co
p
ies directl
y
or indirectl
y
t
hrou
g
h
y
ou, then the onl
y
wa
y
y
ou could satisf
y
both it and this License would be
t
o refrain entirel
y
from distribution of the Pro
g
ram
.
If an
y
p
ortion of this section is held invalid or unenforceable under an
y
p
articular
c
ircumstance, the balance of the section is intended to a
pp
l
y
and the section as a
w
h
o
l
e
i
s
i
nten
d
e
d
to a
pply
i
n ot
h
er c
i
rcumstances
.
It is not the
p
ur
p
ose of this section to induce
y
ou to infrin
g
e an
y
p
atents or othe
r
p
ro
p
ert
y
ri
g
ht claims or to contest validit
y
of an
y
such claims; this section has the
sole
p
ur
p
ose of
p
rotectin
g
the inte
g
rit
y
of the free software distribution s
y
stem
,
w
hi
c
h
i
s
i
m
pl
emente
d
by
p
u
bli
c
li
cense
p
ract
i
ces.
M
an
y
p
eo
pl
e
h
ave ma
d
e
g
enerous
c
ontributions to the wide ran
g
e of software distributed throu
g
h that s
y
stem in reli-
ance on consistent a
pp
lication of that s
y
stem; it is u
p
to the author/donor to decide
i
f he or she is willin
g
to distribute software throu
g
h an
y
other s
y
stem and a licensee
c
annot
i
m
p
ose t
h
at c
h
o
i
ce
.
Thi
s sect
i
on
i
s
i
nten
d
e
d
to ma
k
e t
h
orou
ghly
c
l
ear w
h
at
i
s
b
e
li
eve
d
to
b
e a conse-
q
uence of the rest of this License
.
8. If the distribution and/or use of the Pro
g
ram is restricted in certain countries
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 1P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 1 2011/03/18 12:00:012011/03/18 12:00:01
either by patents or by copyrighted interfaces, the original copyright holder who
p
l
aces t
h
e
P
rogram un
d
er t
hi
s
Li
cense may a
dd
an exp
li
c
i
t geograp
hi
ca
l
di
str
ib
u-
ti
on
li
m
i
tat
i
on exc
l
u
di
ng t
h
ose countr
i
es, so t
h
at
di
str
ib
ut
i
on
i
s perm
i
tte
d
on
l
y
i
n
o
r among countr
i
es not t
h
us exc
l
u
d
e
d
.
I
n suc
h
case, t
hi
s
Li
cense
i
ncorporates
t
he limitation as if written in the body of this License
.
9. The Free Software Foundation may publish revised and/or new versions of the
G
eneral Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems o
r
concerns
.
Each version is given a distinguishing version number. If the Program specifi es a
version number of this License which a
pp
lies to it and "an
y
later version",
y
ou have
t
he o
p
tion of followin
g
the terms and conditions either of that version or of an
y
l
ater version
p
ublished b
y
the Free Software Foundation. If the Pro
g
ram does
not s
p
ecif
y
a version number of this License,
y
ou ma
y
choose an
y
version eve
r
p
ublished b
y
the Free Software Foundation
.
1
0. If
y
ou wish to incor
p
orate
p
arts of the Pro
g
ram into other free
p
ro
g
rams
whose distribution conditions are different
,
write to the author to ask fo
r
p
ermission. For software which is co
py
ri
g
hted b
y
the Free Software Foundation
,
write to the Free Software Foundation; we sometimes make exce
p
tions for this
.
O
ur decision will be
g
uided b
y
the two
g
oals of
p
reservin
g
the free status o
f
all derivatives of our free software and of
p
romotin
g
the sharin
g
and reuse o
f
software
g
enerall
y.
N
O WARRANT
Y
1
1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE
,
THERE IS NO
WARRANTY FOR THE PROGRAM
,
TO THE EXTENT PERMITTED BY AP-
P
LICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
C
OPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PRO-
G
RAM "AS IS" WITHOUT WARRANTY OF ANY KIND
,
EITHER EXPRESSED
O
R IMPLIED
,
INCLUDING
,
BUT NOT LIMITED TO
,
THE IMPLIED WARRAN-
T
IES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.
T
HE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
P
ROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE
,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING
,
REPAIR O
R
C
ORRECTION
.
1
2. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER
,
OR ANY OTHER PART
Y
WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PER-
MITTED ABOVE
,
BE LIABLE TO YOU FOR DAMAGES
,
INCLUDING AN
Y
G
ENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-
ING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(
INCLUD-
ING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES O
R
A
FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PRO-
G
RAMS
)
, EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED
O
F THE POSSIBILITY OF SUCH DAMAGES
.
END OF TERMS AND CONDITION
S
How to A
pp
l
y
These Terms to Your New Pro
g
ram
s
If
y
ou develo
p
a new
p
ro
g
ram, and
y
ou want it to be of the
g
reatest
p
ossible use to
t
he
p
ublic, the best wa
y
to achieve this is to make it free software which ever
y
one
can re
di
str
ib
ute an
d
c
h
an
g
e un
d
er t
h
ese terms
.
T
o do so, attach the followin
g
notices to the
p
ro
g
ram. It is safest to attach them to
t
he start of each source fi le to most effectivel
y
conve
y
the exclusion of warrant
y;
and each fi le should have at least the "co
py
ri
g
ht" line and a
p
ointer to where the
full notice is found
.
one line to
g
ive the pro
g
ram's name and an idea of what it does
.
C
o
py
ri
g
ht
(
C
)
yyyy
name of autho
r
T
his
p
ro
g
ram is free software;
y
ou can redistribute it and/or modif
y
it under the
t
erms of the GNU General Public License as
p
ublished b
y
the Free Software Foun-
d
ation; either version 2 of the License, or
(
at
y
our o
p
tion
)
an
y
later version
.
T
his
p
ro
g
ram is distributed in the ho
p
e that it will be useful, but WITHOUT AN
Y
WARRANTY; without even the im
p
lied warrant
y
of MERCHANTABILITY or FIT-
N
ESS FOR A PARTICULAR PURPOSE. See the GNU General Public License fo
r
more
d
eta
il
s
.
You should have received a co
py
of the GNU General Public License alon
g
with
t
his
p
ro
g
ram; if not, write to the Free Software Foundation, Inc., 51 Franklin Street
,
F
ifth Floor
,
Boston
,
MA 02110-1301
,
USA. Also add information on how to contact
y
ou
by
e
l
ectron
i
c an
d
p
a
p
er ma
il.
If the
p
ro
g
ram is interactive, make it out
p
ut a short notice like this when it starts in
an
i
nteract
i
ve mo
d
e
:
G
nomovision version 69, Co
py
ri
g
ht
(
C
)
year name of author
Gnomovision comes
r
with ABSOLUTELY NO WARRANTY; for details t
yp
e `show w'. This is free
software, and
y
ou are welcome to redistribute it under certain conditions; t
yp
e
`show c' for details
.
T
he h
yp
othetical commands `show w
'
and `show c
'
should show the a
pp
ro
p
riate
p
arts of the General Public License. Of course, the commands
y
ou use ma
y
be
called somethin
g
other than `show w
'
and `show c
'
; the
y
could even be mouse-
c
li
c
k
s or menu
i
tems--w
h
atever su
i
ts
y
our
p
ro
g
ram
.
You should also
g
et
y
our em
p
lo
y
er
(
if
y
ou work as a
p
ro
g
rammer
)
or
y
our school
,
i
f an
y
, to si
g
n a "co
py
ri
g
ht disclaimer" for the
p
ro
g
ram, if necessar
y
. Here is a sam
p
le
;
a
l
ter t
h
e names
:
Yo
y
od
y
ne, Inc., hereb
y
disclaims all co
py
ri
g
ht interest in the
p
ro
g
ram `Gnomovision'
(
which makes
p
asses at com
p
ilers
)
written b
y
James Hacke
r
.
si
g
nature of T
y
Coon, 1 A
p
ril 198
9
Ty
Coon, President of Vice
T
his General Public License does not
p
ermit incor
p
oratin
g
y
our
p
ro
g
ram into
p
ro-
p
rietar
y
p
ro
g
rams. If
y
our
p
ro
g
ram is a subroutine librar
y
,
y
ou ma
y
consider it more
useful to
p
ermit linkin
g
p
ro
p
rietar
y
a
pp
lications with the librar
y
. If this is what
y
ou
want to do
,
use the GNU Lesser General Public License instead of this License
.
If
y
ou are interested in obtainin
g
GPL source code used in this
p
roduct,
p
lease
contact P&F USA
,
Inc.
,
P
O Box 430 Daleville
,
IN 47334-0430 U.S.A
.
LGP
L
G
NU LESSER GENERAL PUBLIC LICENS
E
V
ersion 2.1, February 199
9
C
opyright (C) 1991, 1999 Free Software Foundation, Inc
.
51 Franklin Street
,
Fifth Floor
,
Boston
,
MA 02110-1301 US
A
Everyone is permitted to copy and distribute verbatim copies of this license docu-
ment,
b
ut c
h
ang
i
ng
i
t
i
s not a
ll
owe
d.
[
This is the fi rst released version of the Lesser GPL. It also counts as the successor
o
f the GNU Library Public License, version 2, hence the version number 2.1.]
P
ream
bl
e
The licenses for most software are desi
g
ned to take awa
y
y
our freedom to share
and chan
g
e it. B
y
contrast, the GNU General Public Licenses are intended to
g
uar-
antee
y
our freedom to share and chan
g
e free software--to make sure the software
i
s free for all its users
.
This license, the Lesser General Public License, a
pp
lies to some s
p
eciall
y
desi
g
nated
software
p
acka
g
es--t
yp
icall
y
libraries--of the Free Software Foundation and othe
r
authors who decide to use it. You can use it too, but we su
gg
est
y
ou fi rst think
c
arefull
y
about whether this license or the ordinar
y
General Public License is the
b
etter strate
gy
to use
i
n an
y
p
art
i
cu
l
ar case,
b
ase
d
on t
h
e ex
pl
anat
i
ons
b
e
l
ow
.
When we s
p
eak of free software, we are referrin
g
to freedom of use, not
p
rice.
O
ur General Public Licenses are desi
g
ned to make sure that
y
ou have the freedom
t
o distribute co
p
ies of free software
(
and char
g
e for this service if
y
ou wish
);
t
hat
y
ou receive source code or can
g
et it if
y
ou want it; that
y
ou can chan
g
e the
software and use
p
ieces of it in new free
p
ro
g
rams; and that
y
ou are informed that
y
ou can
d
o t
h
ese t
hi
n
g
s
.
To
p
rotect
y
our ri
g
hts, we need to make restrictions that forbid distributors to
d
en
y
y
ou t
h
ese r
igh
ts or to as
k
y
ou to surren
d
er t
h
ese r
igh
ts.
Th
ese restr
i
ct
i
ons
t
ranslate to certain res
p
onsibilities for
y
ou if
y
ou distribute co
p
ies of the librar
y
o
r
i
f
y
ou modif
y
it
.
For exam
p
le, if
y
ou distribute co
p
ies of the librar
y
, whether
g
ratis or for a fee,
y
ou
must
gi
ve t
h
e rec
ipi
ents a
ll
t
h
e r
igh
ts t
h
at we
g
ave
y
ou.
Y
ou must ma
k
e sure t
h
at
t
he
y
, too, receive or can
g
et the source code. If
y
ou link other code with the librar
y,
y
ou must
p
rovide com
p
lete ob
j
ect fi les to the reci
p
ients, so that the
y
can relink
t
hem with the librar
y
after makin
g
chan
g
es to the librar
y
and recom
p
ilin
g
it. And
y
ou must s
h
ow t
h
em t
h
ese terms so t
h
e
y
k
now t
h
e
i
r r
igh
ts
.
We
p
rotect
y
our ri
g
hts with a two-ste
p
method:
(
1
)
we co
py
ri
g
ht the librar
y
, and
(
2
)
we offer
y
ou this license, which
g
ives
y
ou le
g
al
p
ermission to co
py
, distribute
and/or modif
y
the librar
y.
T
o
p
rotect eac
h
di
str
ib
utor, we want to ma
k
e
i
t ver
y
c
l
ear t
h
at t
h
ere
i
s no warrant
y
for the free librar
y
. Also, if the librar
y
is modifi ed b
y
someone else and
p
assed on
,
th
e rec
ipi
ents s
h
ou
ld
k
now t
h
at w
h
at t
h
e
y
h
ave
i
s not t
h
e or
igi
na
l
vers
i
on, so t
h
at
t
he ori
g
inal author's re
p
utation will not be affected b
y
p
roblems that mi
g
ht be
i
ntro
d
uce
d
by
ot
h
ers
.
Finall
y
, software
p
atents
p
ose a constant threat to the existence of an
y
free
p
ro-
g
ram. We wish to make sure that a com
p
an
y
cannot effectivel
y
restrict the users
o
f a free
p
ro
g
ram b
y
obtainin
g
a restrictive license from a
p
atent holder. Therefore
,
we insist that an
y
p
atent license obtained for a version of the librar
y
must be
c
onsistent with the full freedom of use s
p
ecifi ed in this license
.
Most GNU software, includin
g
some libraries, is covered b
y
the ordinar
y
GNU
G
eneral Public License. This license, the GNU Lesser General Public License, a
p
-
p
lies to certain desi
g
nated libraries, and is
q
uite different from the ordinar
y
General
P
ublic License. We use this license for certain libraries in order to
p
ermit linkin
g
t
hose libraries into non-free
p
ro
g
rams
.
Wh
en a
p
ro
g
ram
i
s
li
n
k
e
d
w
i
t
h
a
lib
rar
y
, w
h
et
h
er stat
i
ca
lly
or us
i
n
g
a s
h
are
d
lib
rar
y,
t
he combination of the two is le
g
all
y
s
p
eakin
g
a combined work, a derivative of the
o
ri
g
inal librar
y
. The ordinar
y
General Public License therefore
p
ermits such linkin
g
o
nl
y
if the entire combination fi ts its criteria of freedom. The Lesser General Public
License
p
ermits more lax criteria for linkin
g
other code with the librar
y.
We call this license the "Lesser" General Public License because it does Less
t
o
p
rotect the user's freedom than the ordinar
y
General Public License. It also
p
rovides other free software develo
p
ers Less of an advanta
g
e over com
p
etin
g
non-
free
p
ro
g
rams. These disadvanta
g
es are the reason we use the ordinar
y
General
P
ublic License for man
y
libraries. However, the Lesser license
p
rovides advanta
g
es
i
n certa
i
n s
p
ec
i
a
l
c
i
rcumstances
.
F
or exam
pl
e, on rare occas
i
ons, t
h
ere ma
y
b
e a s
p
ec
i
a
l
nee
d
to encoura
g
e t
h
e
widest
p
ossible use of a certain librar
y
, so that it becomes a de-facto standard. To
achieve this, non-free
p
ro
g
rams must be allowed to use the librar
y
. A more fre-
q
uent case is that a free librar
y
does the same
j
ob as widel
y
used non-free libraries.
In this case, there is little to
g
ain b
y
limitin
g
the free librar
y
to free software onl
y
, so
we use the Lesser General Public License
.
In other cases,
p
ermission to use a
p
articular librar
y
in non-free
p
ro
g
rams enables
a
g
reater number of
p
eo
p
le to use a lar
g
e bod
y
of free software. For exam
p
le
,
p
ermission to use the GNU C Librar
y
in non-free
p
ro
g
rams enables man
y
more
p
eo
p
le to use the whole GNU o
p
eratin
g
s
y
stem, as well as its variant, the GNU/
Li
nux o
p
erat
i
n
g
s
y
stem
.
Althou
g
h the Lesser General Public License is Less
p
rotective of the users' free-
d
om, it does ensure that the user of a
p
ro
g
ram that is linked with the Librar
y
has
t
he freedom and the wherewithal to run that
p
ro
g
ram usin
g
a modifi ed version o
f
th
e
Lib
rar
y.
The
p
recise terms and conditions for co
py
in
g
, distribution and modifi cation follow.
P
a
y
close attention to the difference between a "work based on the librar
y
" and
a "work that uses the librar
y
". The former contains code derived from the librar
y,
w
h
ereas t
h
e
l
atter must
b
e com
bi
ne
d
w
i
t
h
t
h
e
lib
rar
y
i
n or
d
er to run
.
G
NU LESSER GENERAL PUBLIC LICENS
E
T
ERMS AND CONDITIONS FOR COPYING
,
DISTRIBUTION AND MODIFICA-
T
IO
N
0. This License A
g
reement a
pp
lies to an
y
software librar
y
or other
p
ro
g
ram which
c
onta
i
ns a not
i
ce
pl
ace
d
by
t
h
e co
py
r
igh
t
h
o
ld
er or ot
h
er aut
h
or
i
ze
d
p
art
y
sa
yi
n
g
i
t ma
y
be distributed under the terms of this Lesser General Public License
(
also
c
alled "this License"
)
. Each licensee is addressed as "
y
ou"
.
A "librar
y
" means a collection of software functions and/or data
p
re
p
ared so as to
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 2P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 2 2011/03/18 12:00:032011/03/18 12:00:03
be conveniently linked with application programs (which use some of those func-
t
ions and data) to form executables
.
The "Library", below, refers to any such software library or work which has been
d
istributed under these terms.
A
"work based on the Library" means either the
Lib
rary or any
d
er
i
vat
i
ve wor
k
un
d
er copyr
i
g
h
t
l
aw: t
h
at
i
s to say, a wor
k
conta
i
n
i
ng
t
he Library or a portion of it, either verbatim or with modifi cations and/or trans-
l
ated straightforwardly into another language. (Hereinafter, translation is included
without limitation in the term "modifi cation".)
"Source code" for a work means the preferred form of the work for making modi-
fi cations to it. For a library, complete source code means all the source code fo
r
all modules it contains,
p
lus an
y
associated interface defi nition fi les,
p
lus the scri
p
ts
used to control com
p
ilation and installation of the librar
y.
Activities other than co
py
in
g
, distribution and modifi cation are not covered b
y
this
License; the
y
are outside its sco
p
e. The act of runnin
g
a
p
ro
g
ram usin
g
the Librar
y
i
s not restricted, and out
p
ut from such a
p
ro
g
ram is covered onl
y
if its contents
constitute a work based on the Librar
y
(
inde
p
endent of the use of the Librar
y
in
a tool for writin
g
it
)
. Whether that is true de
p
ends on what the Librar
y
does and
w
h
at t
h
e
p
ro
g
ram t
h
at uses t
h
e
Lib
rar
y
d
oes
.
1. You ma
y
co
py
and distribute verbatim co
p
ies of the Librar
y
's com
p
lete source
c
o
d
e as
y
ou rece
i
ve
i
t,
i
n an
y
me
di
um,
p
rov
id
e
d
t
h
at
y
ou cons
pi
cuous
ly
an
d
a
p
-
p
ro
p
r
i
ate
ly
p
u
bli
s
h
on eac
h
co
py
an a
pp
ro
p
r
i
ate co
py
r
igh
t not
i
ce an
d
di
sc
l
a
i
me
r
o
f warrant
y
; kee
p
intact all the notices that refer to this License and to the
absence of an
y
warrant
y
; and distribute a co
py
of this License alon
g
with the
Lib
rar
y.
You ma
y
char
g
e a fee for the
p
h
y
sical act of transferrin
g
a co
py
, and
y
ou ma
y
at
y
our o
p
tion offer warrant
y
p
rotection in exchan
g
e for a fee
.
2. You ma
y
modif
y
y
our co
py
or co
p
ies of the Librar
y
or an
y
p
ortion of it, thus
formin
g
a work based on the Librar
y
, and co
py
and distribute such modifi cations
o
r work under the terms of Section 1 above,
p
rovided that
y
ou also meet all o
f
th
ese con
di
t
i
ons
:
a
)
The modifi ed work must itself be a software librar
y.
b
)
You must cause the fi les modifi ed to carr
y
p
rominent notices statin
g
that
y
ou
chan
g
ed the fi les and the date of an
y
chan
g
e
.
c
)
You must cause the whole of the work to be licensed at no char
g
e to all third
p
arties under the terms of this License
.
d)
If a facilit
y
in the modifi ed Librar
y
refers to a function or a table of data to
be su
pp
lied b
y
an a
pp
lication
p
ro
g
ram that uses the facilit
y
, other than as an
ar
g
ument
p
assed when the facilit
y
is invoked, then
y
ou must make a
g
ood faith
effort to ensure that, in the event an a
pp
lication does not su
pp
l
y
such function o
r
t
able, the facilit
y
still o
p
erates, and
p
erforms whatever
p
art of its
p
ur
p
ose remains
meanin
g
ful
.
(
For exam
p
le, a function in a librar
y
to com
p
ute s
q
uare roots has a
p
ur
p
ose that
i
s entirel
y
well-defi ned inde
p
endent of the a
pp
lication. Therefore, Subsection 2d
re
q
uires that an
y
a
pp
lication-su
pp
lied function or table used b
y
this function must
be o
p
tional: if the a
pp
lication does not su
pp
l
y
it, the s
q
uare root function must
still com
p
ute s
q
uare roots.
)
T
hese re
q
uirements a
pp
l
y
to the modifi ed work as a whole. If identifi able sections
of that work are not derived from the Librar
y
, and can be reasonabl
y
considered
i
n
d
e
p
en
d
ent an
d
se
p
arate wor
k
s
i
n t
h
emse
l
ves, t
h
en t
hi
s
Li
cense, an
d
i
ts terms,
d
o
not a
pply
to t
h
ose sect
i
ons w
h
en
y
ou
di
str
ib
ute t
h
em as se
p
arate wor
k
s.
B
ut w
h
en
y
ou distribute the same sections as
p
art of a whole which is a work based on the
Librar
y
, the distribution of the whole must be on the terms of this License, whose
p
ermissions for other licensees extend to the entire whole, and thus to each and
ever
y
p
art re
g
ardless of who wrote it
.
T
hus, it is not the intent of this section to claim ri
g
hts or contest
y
our ri
g
hts to
wor
k
wr
i
tten ent
i
re
ly
by
y
ou; rat
h
er, t
h
e
i
ntent
i
s to exerc
i
se t
h
e r
igh
t to contro
l
t
h
e
d
istribution of derivative or collective works based on the Librar
y.
In addition, mere a
gg
re
g
ation of another work not based on the Librar
y
with the
Librar
y
(
or with a work based on the Librar
y)
on a volume of a stora
g
e or distribu-
t
ion medium does not brin
g
the other work under the sco
p
e of this License
.
3. You ma
y
o
p
t to a
pp
l
y
the terms of the ordinar
y
GNU General Public License
i
nstead of this License to a
g
iven co
py
of the Librar
y
. To do this,
y
ou must alte
r
all the notices that refer to this License, so that the
y
refer to the ordinar
y
GNU
G
eneral Public License, version 2, instead of to this License.
(
If a newer version
t
han version 2 of the ordinar
y
GNU General Public License has a
pp
eared, then
y
ou can s
p
ecif
y
that version instead if
y
ou wish.
)
Do not make an
y
other chan
g
e
i
n t
h
ese not
i
ces
.
Once this chan
g
e is made in a
g
iven co
py
, it is irreversible for that co
py
, so the or-
d
inar
y
GNU General Public License a
pp
lies to all subse
q
uent co
p
ies and derivative
works made from that co
py.
This o
p
tion is useful when
y
ou wish to co
py
p
art of the code of the Librar
y
into a
p
ro
g
ram t
h
at
i
s not a
lib
rar
y.
4. You ma
y
co
py
and distribute the Librar
y
(
or a
p
ortion or derivative of it, unde
r
S
ection 2
)
in ob
j
ect code or executable form under the terms of Sections 1
and 2 above
p
rovided that
y
ou accom
p
an
y
it with the com
p
lete corres
p
ondin
g
machine-readable source code
,
which must be distributed under the terms o
f
S
ections 1 and 2 above on a medium customaril
y
used for software interchan
g
e
.
If distribution of ob
j
ect code is made b
y
offerin
g
access to co
py
from a desi
g
nated
p
lace, then offerin
g
e
q
uivalent access to co
py
the source code from the same
p
lace
satisfi es the re
q
uirement to distribute the source code, even thou
g
h third
p
arties
are not com
p
e
ll
e
d
to co
py
t
h
e source a
l
on
g
w
i
t
h
t
h
e o
bj
ect co
d
e
.
5. A
p
ro
g
ram that contains no derivative of an
y
p
ortion of the Librar
y
, but is
d
es
ig
ne
d
to wor
k
w
i
t
h
t
h
e
Lib
rar
y
by
b
e
i
n
g
com
pil
e
d
or
li
n
k
e
d
w
i
t
h
i
t,
i
s ca
ll
e
d
a
"work that uses the Librar
y
". Such a work, in isolation, is not a derivative work o
f
t
he Librar
y
, and therefore falls outside the sco
p
e of this License
.
However, linkin
g
a
"
work that uses the Librar
y"
with the Librar
y
creates an execut-
able that is a derivative of the Librar
y
(
because it contains
p
ortions of the Librar
y),
rather than a "work that uses the librar
y
". The executable is therefore covered b
y
t
his License. Section 6 states terms for distribution of such executables
.
When a "work that uses the Librar
y
" uses material from a header fi le that is
p
art
of the Librar
y
, the ob
j
ect code for the work ma
y
be a derivative work of the
Library even though the source code is not. Whether this is true is especially signifi -
c
ant if the work can be linked without the Library, or if the work is itself a library.
T
he threshold for this to be true is not precisely defi ned by law
.
If such an object fi le uses only numerical parameters, data structure layouts and
accessors, and small macros and small inline functions (ten lines or less in length)
,
t
hen the use of the object fi le is unrestricted, regardless of whether it is legally
a derivative work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object
c
ode for the work under the terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not the
y
are linked directl
y
with the
Librar
y
itself
.
6. As an exce
p
tion to the Sections above,
y
ou ma
y
also combine or link a "work
t
hat uses the Librar
y"
with the Librar
y
to
p
roduce a work containin
g
p
ortions
o
f the Librar
y
, and distribute that work under terms of
y
our choice,
p
rovided
t
hat the terms
p
ermit modifi cation of the work for the customer's own use and
reverse en
g
ineerin
g
for debu
gg
in
g
such modifi cations
.
You must
g
ive
p
rominent notice with each co
py
of the work that the Librar
y
is
use
d
i
n
i
t an
d
t
h
at t
h
e
Lib
rar
y
an
d
i
ts use are covere
d
by
t
hi
s
Li
cense.
Y
ou must
su
pp
l
y
a co
py
of this License. If the work durin
g
execution dis
p
la
y
s co
py
ri
g
ht
notices,
y
ou must include the co
py
ri
g
ht notice for the Librar
y
amon
g
them, as well
as a reference directin
g
the user to the co
py
of this License. Also,
y
ou must do one
o
f these thin
g
s
:
a
)
Accom
p
an
y
the work with the com
p
lete corres
p
ondin
g
machine-readable
s
ource code for the Librar
y
includin
g
whatever chan
g
es were used in the work
(
which must be distributed under Sections 1 and 2 above
)
; and, if the work is an
executable linked with the Librar
y
, with the com
p
lete machine-readable
"
work
t
hat uses the Librar
y
", as ob
j
ect code and/or source code, so that the user can
modif
y
the Librar
y
and then relink to
p
roduce a modifi ed executable containin
g
t
he modifi ed Librar
y
.
(
It is understood that the user who chan
g
es the contents
o
f defi nitions fi les in the Librar
y
will not necessaril
y
be able to recom
p
ile the
a
pp
lication to use the modifi ed defi nitions.
)
b)
Use a suitable shared librar
y
mechanism for linkin
g
with the Librar
y
. A suitable
mechanism is one that
(
1
)
uses at run time a co
py
of the librar
y
alread
y
p
resent
o
n the user's com
p
uter s
y
stem, rather than co
py
in
g
librar
y
functions into the
executable, and
(
2
)
will o
p
erate
p
ro
p
erl
y
with a modifi ed version of the librar
y
, if
t
he user installs one, as lon
g
as the modifi ed version is interface-com
p
atible with
th
e vers
i
on t
h
at t
h
e wor
k
was ma
d
e w
i
t
h.
c)
Accom
p
an
y
the work with a written offer, valid for at least three
y
ears, to
g
ive
t
he same user the materials s
p
ecifi ed in Subsection 6a, above, for a char
g
e no
more than the cost of
p
erformin
g
this distribution
.
d)
If distribution of the work is made b
y
offerin
g
access to co
py
from a desi
g
-
n
ated
p
lace, offer e
q
uivalent access to co
py
the above s
p
ecifi ed materials from
th
e same
pl
ace
.
e
)
Ver if
y
that the user has alread
y
received a co
py
of these materials or that
y
ou
h
ave a
l
rea
dy
sent t
hi
s user a co
py.
For an executable, the re
q
uired form of the "work that uses the Librar
y
" must
i
nclude an
y
data and utilit
y
p
ro
g
rams needed for re
p
roducin
g
the executable from
i
t.
H
owever, as a s
p
ec
i
a
l
exce
p
t
i
on, t
h
e mater
i
a
l
s to
b
e
di
str
ib
ute
d
nee
d
not
i
nc
l
u
d
e
an
y
thin
g
that is normall
y
distributed
(
in either source or binar
y
form
)
with the
ma
j
or com
p
onents
(
com
p
iler, kernel, and so on
)
of the o
p
eratin
g
s
y
stem on which
t
he executable runs, unless that com
p
onent itself accom
p
anies the executable
.
It ma
y
ha
pp
en that this re
q
uirement contradicts the license restrictions of othe
r
p
ro
p
rietar
y
libraries that do not normall
y
accom
p
an
y
the o
p
eratin
g
s
y
stem. Such
a contra
di
ct
i
on means
y
ou cannot use
b
ot
h
t
h
em an
d
t
h
e
Lib
rar
y
to
g
et
h
er
i
n an
executa
bl
e t
h
at
y
ou
di
str
ib
ute
.
7. You ma
y
p
lace librar
y
facilities that are a work based on the Librar
y
side-b
y
-side
i
n a sin
g
le librar
y
to
g
ether with other librar
y
facilities not covered b
y
this License
,
an
d
di
str
ib
ute suc
h
a com
bi
ne
d
lib
rar
y
,
p
rov
id
e
d
t
h
at t
h
e se
p
arate
di
str
ib
ut
i
on
o
f the work based on the Librar
y
and of the other librar
y
facilities is otherwise
p
erm
i
tte
d
, an
d
p
rov
id
e
d
t
h
at
y
ou
d
o t
h
ese two t
hi
n
g
s
:
a
)
Accom
p
an
y
the combined librar
y
with a co
py
of the same work based on
t
he Librar
y
, uncombined with an
y
other librar
y
facilities. This must be distributed
u
nder the terms of the Sections above
.
b)
Give
p
rominent notice with the combined librar
y
of the fact that
p
art of it
i
s a work based on the Librar
y
, and ex
p
lainin
g
where to fi nd the accom
p
an
y
in
g
u
ncombined form of the same work
.
8. You ma
y
not co
py
, modif
y
, sublicense, link with, or distribute the Librar
y
exce
p
t
as ex
p
ressl
y
p
rovided under this License. An
y
attem
p
t otherwise to co
py
, modif
y,
su
bli
cense,
li
n
k
w
i
t
h
, or
di
str
ib
ute t
h
e
Lib
rar
y
i
s vo
id
, an
d
w
ill
automat
i
ca
lly
term
i
-
nate
y
our r
igh
ts un
d
er t
hi
s
Li
cense.
H
owever,
p
art
i
es w
h
o
h
ave rece
i
ve
d
co
pi
es
,
o
r ri
g
hts, from
y
ou under this License will not have their licenses terminated so
l
on
g
as such
p
arties remain in full com
p
liance
.
9. You are not re
q
uired to acce
p
t this License, since
y
ou have not si
g
ned it. How-
ever, nothin
g
else
g
rants
y
ou
p
ermission to modif
y
or distribute the Librar
y
or its
d
erivative works. These actions are
p
rohibited b
y
law if
y
ou do not acce
p
t this
License. Therefore, b
y
modif
y
in
g
or distributin
g
the Librar
y
(
or an
y
work based
o
n the Librar
y)
,
y
ou indicate
y
our acce
p
tance of this License to do so, and all its
t
erms and conditions for co
py
in
g
, distributin
g
or modif
y
in
g
the Librar
y
or works
b
ase
d
on
i
t
.
10. Each time
y
ou redistribute the Librar
y
(
or an
y
work based on the Librar
y),
t
he reci
p
ient automaticall
y
receives a license from the ori
g
inal licensor to co
py,
d
istribute, link with or modif
y
the Librar
y
sub
j
ect to these terms and condi-
t
ions. You ma
y
not im
p
ose an
y
further restrictions on the reci
p
ients' exercise
o
f the ri
g
hts
g
ranted herein. You are not res
p
onsible for enforcin
g
com
p
liance
by
t
hi
r
d
p
art
i
es w
i
t
h
t
hi
s
Li
cense
.
11. If, as a conse
q
uence of a court
j
ud
g
ment or alle
g
ation of
p
atent infrin
g
ement
o
r for an
y
other reason
(
not limited to
p
atent issues
)
, conditions are im
p
osed
o
n
y
ou
(
whether b
y
court order, a
g
reement or otherwise
)
that contradict the
c
onditions of this License, the
y
do not excuse
y
ou from the conditions of this
License. If
y
ou cannot distribute so as to satisf
y
simultaneousl
y
y
our obli
g
ations
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 3P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 3 2011/03/18 12:00:032011/03/18 12:00:03
un
d
er t
hi
s
Li
cense an
d
any ot
h
er pert
i
nent o
bli
gat
i
ons, t
h
en as a consequence
y
ou may not distribute the Library at all. For example, if a patent license would
not permit royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the
Lib
rary
.
If any portion of this section is held invalid or unenforceable under any particula
r
circumstance, the balance of the section is intended to apply, and the section as a
w
h
o
l
e
i
s
i
nten
d
e
d
to app
l
y
i
n ot
h
er c
i
rcumstances
.
It is not the purpose of this section to induce you to infringe any patents or othe
r
p
ro
p
ert
y
ri
g
ht claims or to contest validit
y
of an
y
such claims; this section has the
sole
p
ur
p
ose of
p
rotectin
g
the inte
g
rit
y
of the free software distribution s
y
stem
w
hi
c
h
i
s
i
m
pl
emente
d
by
p
u
bli
c
li
cense
p
ract
i
ces.
M
an
y
p
eo
pl
e
h
ave ma
d
e
g
ener-
ous contributions to the wide ran
g
e of software distributed throu
g
h that s
y
stem
i
n reliance on consistent a
pp
lication of that s
y
stem; it is u
p
to the author/donor to
d
ecide if he or she is willin
g
to distribute software throu
g
h an
y
other s
y
stem and a
li
censee cannot
i
m
p
ose t
h
at c
h
o
i
ce
.
Thi
s sect
i
on
i
s
i
nten
d
e
d
to ma
k
e t
h
orou
ghly
c
l
ear w
h
at
i
s
b
e
li
eve
d
to
b
e a conse-
q
uence of the rest of this License
.
12. If the distribution and/or use of the Librar
y
is restricted in certain countries
either b
y
p
atents or b
y
co
py
ri
g
hted interfaces, the ori
g
inal co
py
ri
g
ht holder
w
h
o
pl
aces t
h
e
Lib
rar
y
un
d
er t
hi
s
Li
cense ma
y
a
dd
an ex
pli
c
i
t
g
eo
g
ra
phi
ca
l
di
str
ib
ut
i
on
li
m
i
tat
i
on exc
l
u
di
n
g
t
h
ose countr
i
es, so t
h
at
di
str
ib
ut
i
on
i
s
p
erm
i
t-
t
e
d
on
ly
i
n or amon
g
countr
i
es not t
h
us exc
l
u
d
e
d
.
I
n suc
h
case, t
hi
s
Li
cense
i
ncor
p
orates the limitation as if written in the bod
y
of this License
.
13. The Free Software Foundation ma
y
p
ublish revised and/or new versions of the
Lesser General Public License from time to time. Such new versions will be
similar in s
p
irit to the
p
resent version, but ma
y
differ in detail to address new
p
ro
bl
ems or concerns
.
Each version is
g
iven a distin
g
uishin
g
version number. If the Librar
y
s
p
ecifi es a ver-
sion number of this License which a
pp
lies to it and "an
y
later version",
y
ou have the
o
p
tion of followin
g
the terms and conditions either of that version or of an
y
late
r
version
p
ublished b
y
the Free Software Foundation. If the Librar
y
does not s
p
ecif
y
a
li
cense vers
i
on num
b
er,
y
ou ma
y
c
h
oose an
y
vers
i
on ever
p
u
bli
s
h
e
d
by
t
h
e
F
ree
S
oftware Foundation
.
14. If
y
ou wish to incor
p
orate
p
arts of the Librar
y
into other free
p
ro
g
rams whose
di
str
ib
ut
i
on con
di
t
i
ons are
i
ncom
p
at
ibl
e w
i
t
h
t
h
ese, wr
i
te to t
h
e aut
h
or to as
k
for
p
ermission. For software which is co
py
ri
g
hted b
y
the Free Software Foun-
d
ation, write to the Free Software Foundation; we sometimes make exce
p
tions
for this. Our decision will be
g
uided b
y
the two
g
oals of
p
reservin
g
the free
status of all derivatives of our free software and of
p
romotin
g
the sharin
g
and
reuse of software
g
enerall
y.
N
O WARRANT
Y
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE
,
THERE IS NO
WARRANTY FOR THE LIBRARY
,
TO THE EXTENT PERMITTED BY AP-
P
LICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
C
OPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
"AS IS" WITHOUT WARRANTY OF ANY KIND
,
EITHER EXPRESSED OR IM-
P
LIED
,
INCLUDING
,
BUT NOT LIMITED TO
,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY
IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE
,
YOU ASSUME
T
HE COST OF ALL NECESSARY SERVICING
,
REPAIR OR CORRECTION
.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
T
O IN WRITING WILL ANY COPYRIGHT HOLDER
,
OR ANY OTHE
R
P
ARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
P
ERMITTED ABOVE
,
BE LIABLE TO YOU FOR DAMAGES
,
INCLUDING ANY
G
ENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-
ING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(
INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
F
AILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE
),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
P
OSSIBILITY OF SUCH DAMAGES
.
END OF TERMS AND CONDITION
S
How to A
pp
l
y
These Terms to Your New Librarie
s
If
y
ou develo
p
a new librar
y
, and
y
ou want it to be of the
g
reatest
p
ossible use to
t
he
p
ublic, we recommend makin
g
it free software that ever
y
one can redistribute
and chan
g
e. You can do so b
y
p
ermittin
g
redistribution under these terms
(
o
r
,
alternativel
y
, under the terms of the ordinar
y
General Public License
).
To a
pp
l
y
these terms, attach the followin
g
notices to the librar
y
. It is safest to at-
t
ach them to the start of each source fi le to most effectivel
y
conve
y
the exclusion
of warrant
y
; and each fi le should have at least the "co
py
ri
g
ht" line and a
p
ointer to
where the full notice is found
.
<
one line to
g
ive the librar
y
's name and a brief idea of what it does.>
C
o
py
ri
g
ht
(
C
)
<
y
ear> <name of author>
T
his librar
y
is free software;
y
ou can redistribute it and/or modif
y
it under the
t
erms of the GNU Lesser General Public License as
p
ublished b
y
the Free
S
oftware Foundation; either version 2.1 of the License, or
(
at
y
our o
p
tion
)
an
y
l
ater vers
i
on
.
T
his librar
y
is distributed in the ho
p
e that it will be useful, but WITHOUT ANY
WARRANTY; without even the im
p
lied warrant
y
of MERCHANTABILITY o
r
F
ITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details
.
You should have received a co
py
of the GNU Lesser General Public License
alon
g
with this librar
y
; if not, write to the Free Software Foundation, Inc., 51
F
ranklin Street
,
Fifth Floor
,
Boston
,
MA 02110-1301 US
A
A
lso add information on how to contact
y
ou b
y
electronic and
p
a
p
er mail
.
You should also
g
et
y
our em
p
lo
y
er
(
if
y
ou work as a
p
ro
g
rammer
)
or
y
our school
,
i
f an
y
, to si
g
n a "co
py
ri
g
ht disclaimer" for the librar
y
, if necessar
y
. Here is a sam
p
le
;
a
l
ter t
h
e names
:
Y
oyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a
l
ibrary for tweaking knobs) written by James Random Hacke
r
.
<
signature of Ty Coon>, 1 April 1990
T
y Coon, President of Vice
T
hat
'
s all there is to it
!
If you are interested in obtaining LGPL source code used in this product, please
contact P&F USA
,
Inc.
,
P
O Box 430 Daleville
,
IN 47334-0430 U.S.A
.
BS
D
C
o
py
ri
g
ht
(
c
)
2003-2010, Jouni Malinen <
j
@w1.fi > and contributors All Ri
g
hts
R
eserve
d.
Redistribution and use in source and binar
y
forms, with or without modifi cation
,
are
p
ermitted
p
rovided that the followin
g
conditions are met
:
1
. Redistributions of source code must retain the above co
py
ri
g
ht notice, this list o
f
conditions and the followin
g
disclaime
r
.
2. Redistributions in binar
y
form must re
p
roduce the above co
py
ri
g
ht notice, this
l
ist of conditions and the followin
g
disclaimer in the documentation and/or other
mater
i
a
l
s
p
rov
id
e
d
w
i
t
h
t
h
e
di
str
ib
ut
i
on
.
3
. Neither the name
(
s
)
of the above-listed co
py
ri
g
ht holder
(
s
)
nor the names o
f
i
ts contributors ma
y
be used to endorse or
p
romote
p
roducts derived from this
software without s
p
ecifi c
p
rior written
p
ermission
.
T
HIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CON-
T
RIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES
,
INCLUD-
ING
,
BUT NOT LIMITED TO
,
THE IMPLIED WARRANTIES OF MERCHANT-
A
BILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED
.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT
,
INDIRECT
,
INCIDENTAL
,
SPECIAL
,
EXEMPLARY
,
O
R
C
ONSEQUENTIAL DAMAGES
(
INCLUDING, BUT NOT LIMITED TO, PRO-
C
UREMENT OF SUBSTITUTE GOODS OR SERVICES
;
LOSS OF USE
,
DATA
,
O
R
P
ROFITS; OR BUSINESS INTERRUPTION
)
HOWEVER CAUSED AND ON ANY
T
HEORY OF LIABILITY
,
WHETHER IN CONTRACT
,
STRICT LIABILITY
,
OR TORT
(
INCLUDING NEGLIGENCE OR OTHERWISE
)
ARISING IN ANY WAY OUT
O
F THE USE OF THIS SOFTWARE
,
EVEN IF ADVISED OF THE POSSIBILITY OF
S
UCH DAMAGE
.
MIT
--------------------------------------------
•
ex
p
a
t
C
o
py
ri
g
ht © 1998, 1999, 2000 Thai O
p
en Source Software Center Ltd and Clark Coo
p
e
r
C
o
py
ri
g
ht © 2001, 2002, 2003, 2004, 2005, 2006 Ex
p
at maintainers
.
--------------------------------------------
•
l
ua
C
o
py
ri
g
ht © 1994 -2010 Lua.or
g
, PUC-Rio
.
--------------------------------------------
• lua-xmlreader
C
o
py
ri
g
ht © 2008 A.S. Bradbur
y
--------------------------------------------
• lua-slncrypto
C
o
py
ri
g
ht © 2005 Malete Partner, Berlin,
p
artner@malete.or
g
--------------------------------------------
• libxml2
C
o
py
ri
g
ht © 1998-2003 Daniel Veillard. All Ri
g
hts Reserved
.
--------------------------------------------
P
ermission is hereb
y
g
ranted, free of char
g
e, to an
y
p
erson obtainin
g
a co
py
o
f
t
his software and associated documentation fi les
(
the "Software"
)
, to deal in the
S
oftware without restriction, includin
g
without limitation the ri
g
hts to use, co
py,
modif
y
, mer
g
e,
p
ublish, distribute, sublicense, and/or sell co
p
ies of the Software
,
and to
p
ermit
p
ersons to whom the Software is furnished to do so, sub
j
ect to the
followin
g
conditions
:
Th
e a
b
ove co
py
r
igh
t not
i
ce an
d
t
hi
s
p
erm
i
ss
i
on not
i
ce s
h
a
ll
b
e
i
nc
l
u
d
e
d
i
n a
ll
co
p
-
i
es or substantial
p
ortions of the Software
.
T
HE SOFTWARE IS PROVIDED "AS IS"
,
WITHOUT WARRANTY OF ANY KIND
,
EXPRESS OR IMPLIED
,
INCLUDING BUT NOT LIMITED TO THE WARRAN-
T
IES OF MERCHANTABILITY
,
FITNESS FOR A PARTICULAR PURPOSE AND
N
ONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM
,
DAMAGES OR OTHER LIABILITY
,
WHETHER IN AN ACTION OF CONTRACT
,
TORT OR OTHERWISE
,
ARISING
F
ROM
,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
O
R OTHER DEALINGS IN THE SOFTWARE
.
MIT/
X
C
OPYRIGHT AND PERMISSION NOTIC
E
C
o
py
ri
g
ht
(
c
)
1996 - 2009, Daniel Stenber
g
, <daniel@haxx.se>
.
A
ll ri
g
hts reserved
.
P
ermission to use, co
py
, modif
y
, and distribute this software for an
y
p
ur
p
ose with
or without fee is hereb
y
g
ranted,
p
rovided that the above co
py
ri
g
ht notice and this
p
erm
i
ss
i
on not
i
ce a
pp
ear
i
n a
ll
co
pi
es
.
T
HE SOFTWARE IS PROVIDED "AS IS"
,
WITHOUT WARRANTY OF ANY KIND
,
EXPRESS OR IMPLIED
,
INCLUDING BUT NOT LIMITED TO THE WARRAN-
T
IES OF MERCHANTABILITY
,
FITNESS FOR A PARTICULAR PURPOSE AND
N
ONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
A
UTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM
,
DAM-
A
GES OR OTHER LIABILITY
,
WHETHER IN AN ACTION OF CONTRACT
,
TORT
O
R OTHERWISE
,
ARISING FROM
,
OUT OF OR IN CONNECTION WITH THE
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 4P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 4 2011/03/18 12:00:042011/03/18 12:00:04
S
OFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE
.
Except as contained in this notice, the name of a copyright holder shall not be
use
d
i
n a
d
vert
i
s
i
ng or ot
h
erw
i
se to promote t
h
e sa
l
e, use or ot
h
er
d
ea
li
ngs
i
n t
hi
s
S
oftware without prior written authorization of the copyright holde
r
.
gSOAP
P
art of the software embedded in this product is gSOAP software
.
P
ortions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen
,
G
enivia inc. All Rights Reserved
.
T
HE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA
INC AND ANY EXPRESS OR IMPLIED WARRANTIES
,
INCLUDING
,
BUT NOT
LIMITED TO
,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
N
ESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
T
HE AUTHOR BE LIABLE FOR ANY DIRECT
,
INDIRECT
,
INCIDENTAL
,
SPECIAL
,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(
INCLUDING, BUT NOT LIM-
ITED TO
,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES
;
LOSS OF
U
SE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION
)
HOWEVER CAUSED
A
ND ON ANY THEORY OF LIABILITY
,
WHETHER IN CONTRACT
,
STRICT
LIABILITY, OR TORT
(
INCLUDING NEGLIGENCE OR OTHERWISE
)
ARISING IN
A
NY WAY OUT OF THE USE OF THIS SOFTWARE
,
EVEN IF ADVISED OF THE
P
OSSIBILITY OF SUCH DAMAGE
.
F
ree
Typ
e
P
ortions of this software are co
py
ri
g
ht
(
c
)
2001, 2002, 2003, 2004, 2006 The
F
reeT
yp
e Pro
j
ect
(
www.freet
yp
e.or
g)
. All ri
g
hts reserved
.
LibJPE
G
T
his software is based in
p
art on the work of the Inde
p
endent JPEG Grou
p.
Op
en SS
L
LICENSE ISSUE
S
==========
T
he O
p
enSSL toolkit sta
y
s under a dual license, i.e. both the conditions of the
Op
enSSL License and the ori
g
inal SSLea
y
license a
pp
l
y
to the toolkit. See below
for the actual license texts. Actuall
y
both licenses are BSD-st
y
le O
p
en Source
l
icenses. In case of an
y
license issues related to O
p
enSSL
p
lease contact o
p
enssl-
core@o
p
enssl.or
g.
Op
enSSL License
----------------------
/*
===============================================
C
o
py
ri
g
ht
(
c
)
1998-2008 The O
p
enSSL Pro
j
ect. All ri
g
hts reserved
.
Redistribution and use in source and binar
y
forms, with or without modifi cation
,
are
p
ermitted
p
rovided that the followin
g
conditions are met
:
1
. Redistributions of source code must retain the above co
py
ri
g
ht notice, this list
o
f conditions and the followin
g
disclaime
r
.
2. Redistributions in binar
y
form must re
p
roduce the above co
py
ri
g
ht notice
,
t
his list of conditions and the followin
g
disclaimer in the documentation and
/
or ot
h
er mater
i
a
l
s
p
rov
id
e
d
w
i
t
h
t
h
e
di
str
ib
ut
i
on
.
3
. All advertisin
g
materials mentionin
g
features or use of this software must
d
is
p
la
y
the followin
g
acknowled
g
ment: "This
p
roduct includes software devel-
o
p
ed b
y
the O
p
enSSL Pro
j
ect for use in the O
p
enSSL Toolkit.
(
htt
p
://www
.
o
p
enssl.or
g
/
)"
4. The names "O
p
enSSL Toolkit" and "O
p
enSSL Pro
j
ect" must not be used to en-
d
orse or
p
romote
p
roducts derived from this software without
p
rior written
p
ermission. For written
p
ermission,
p
lease contact o
p
enssl-core@o
p
enssl.or
g.
5. Products derived from this software ma
y
not be called "O
p
enSSL" nor ma
y
"O
p
enSSL" a
pp
ear in their names without
p
rior written
p
ermission of the
Op
enSSL Pro
j
ect
.
6. Redistributions of an
y
form whatsoever must retain the followin
g
acknowled
g
-
ment: "This
p
roduct includes software develo
p
ed b
y
the O
p
enSSL Pro
j
ect fo
r
use in the O
p
enSSL Toolkit
(
htt
p
://www.o
p
enssl.or
g
/
)"
T
HIS SOFTWARE IS PROVIDED BY THE O
p
enSSL PROJECT ``AS IS'' AND
A
NY EXPRESSED OR IMPLIED WARRANTIES
,
INCLUDING
,
BUT NOT LIM-
ITED TO
,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
F
OR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHAL
L
T
HE O
p
enSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR AN
Y
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUEN-
T
IAL DAMAGES
(
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
S
UBSTITUTE GOODS OR SERVICES
;
LOSS OF USE
,
DATA
,
OR PROFITS
;
O
R
BUSINESS INTERRUPTION
)
HOWEVER CAUSED AND ON ANY THEORY
O
F LIABILITY
,
WHETHER IN CONTRACT
,
STRICT LIABILITY
,
OR TORT
(
INCLUDING NEGLIGENCE OR OTHERWISE
)
ARISING IN ANY WAY OUT
O
F THE USE OF THIS SOFTWARE
,
EVEN IF ADVISED OF THE POSSIBILIT
Y
O
F SUCH DAMAGE
.
===============================================
T
his
p
roduct includes cr
yp
to
g
ra
p
hic software written b
y
Eric Youn
g
(
ea
y
@
c
r
yp
tsoft.com
)
. This
p
roduct includes software written b
y
Tim Hudson
(
t
j
h@
c
r
yp
tsoft.com
).
O
ri
g
inal SSLea
y
License
-----------------------------
/*
*
*
*
C
o
py
ri
g
ht
(
C
)
1995-1998 Eric Youn
g
(
ea
y
@cr
yp
tsoft.com
)
All ri
g
hts reserved
.
T
his
p
acka
g
e is an SSL im
p
lementation written b
y
Eric Youn
g
(
ea
y
@cr
yp
tsoft
.
c
om
).
T
he im
p
lementation was written so as to conform with Netsca
p
es SSL
.
T
his library is free for commercial and non-commercial use as long as the
following conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
S
SL code. The SSL documentation included with this distribution is covered by
t
he same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft
.
c
om)
.
C
opyright remains Eric Young's, and as such any Copyright notices in the code
are not to
b
e remove
d.
If this package is used in a product, Eric Young should be given attribution as the
author of the parts of the library used
.
T
his can be in the form of a textual messa
g
e at
p
ro
g
ram startu
p
or in documen-
t
ation
(
online or textual
)
p
rovided with the
p
acka
g
e
.
Redistribution and use in source and binar
y
forms, with or without modifi cation
,
are
p
ermitted
p
rovided that the followin
g
conditions are met
:
1
. Redistributions of source code must retain the co
py
ri
g
ht notice, this list o
f
c
onditions and the followin
g
disclaimer.
2. Redistributions in binar
y
form must re
p
roduce the above co
py
ri
g
ht notice
,
this list of conditions and the followin
g
disclaimer in the documentation and
/
or ot
h
er mater
i
a
l
s
p
rov
id
e
d
w
i
t
h
t
h
e
di
str
ib
ut
i
on
.
3
. All advertisin
g
materials mentionin
g
features or use of this software must
d
is
p
la
y
the followin
g
acknowled
g
ement: "This
p
roduct includes cr
yp
to
g
ra
p
hic
software written b
y
Eric Youn
g
(
ea
y
@cr
yp
tsoft.com
)
" The word 'cr
yp
to-
g
ra
p
hic' can be left out if the rouines from the librar
y
bein
g
used are not
c
r
yp
to
g
ra
p
hic related :-
).
4. If
y
ou include an
y
Windows s
p
ecifi c code
(
or a derivative thereof
)
from the
a
pp
s director
y
(
a
pp
lication code
)
y
ou must include an acknowled
g
ement
:
"This
p
roduct includes software written b
y
Tim Hudson
(
t
j
h@cr
yp
tsoft.com
)"
T
HIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND AN
Y
EXPRESS OR IMPLIED WARRANTIES
,
INCLUDING
,
BUT NOT LIMITED TO
,
T
HE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FO
R
A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
A
UTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT
,
INDIRECT
,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
G
OODS OR SERVICES
;
LOSS OF USE
,
DATA
,
OR PROFITS
;
OR BUSINESS
INTERRUPTION
)
HOWEVER CAUSED AND ON ANY THEORY OF LIABIL-
ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(
INCLUDING
N
EGLIGENCE OR OTHERWISE
)
ARISING IN ANY WAY OUT OF THE USE
O
F THIS SOFTWARE
,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE
.
T
he licence and distribution terms for an
y
p
ublicall
y
available version or deriva-
t
ive of this code cannot be chan
g
ed. i.e. this code cannot sim
p
l
y
be co
p
ied and
p
ut un
d
er anot
h
er
di
str
ib
ut
i
on
li
cence
[
includin
g
the GNU Public Licence.]
V
era
F
ont
s
C
o
py
ri
g
ht
C
o
py
ri
g
ht
(
c
)
2003 b
y
Bitstream, Inc. All Ri
g
hts Reserved. Bitstream Vera is a trade-
mark of Bitstream
,
Inc
.
P
ermission is hereb
y
g
ranted, free of char
g
e, to an
y
p
erson obtainin
g
a co
py
of the
fonts accom
p
an
y
in
g
this license
(
“Fonts”
)
and associated documentation fi les
(
the
“Font Software”
)
, to re
p
roduce and distribute the Font Software, includin
g
without
l
imitation the ri
g
hts to use, co
py
, mer
g
e,
p
ublish, distribute, and/or sell co
p
ies of the
F
ont Software, and to
p
ermit
p
ersons to whom the Font Software is furnished to
d
o so, sub
j
ect to the followin
g
conditions
:
Th
e a
b
ove co
py
r
igh
t an
d
tra
d
emar
k
not
i
ces an
d
t
hi
s
p
erm
i
ss
i
on not
i
ce s
h
a
ll
b
e
i
ncluded in all co
p
ies of one or more of the Font Software t
yp
efaces
.
T
he Font Software ma
y
be modifi ed, altered, or added to, and in
p
articular the
d
esi
g
ns of
g
l
yp
hs or characters in the Fonts ma
y
be modifi ed and additional
g
l
yp
hs
o
r characters ma
y
be added to the Fonts, onl
y
if the fonts are renamed to names
not containin
g
either the words
“
Bitstream
”
or the word
“
Vera
”.
T
his License becomes null and void to the extent a
pp
licable to Fonts or Font Soft-
w
are that has been modifi ed and is distributed under the “Bitstream Vera” names
.
T
he Font Software ma
y
be sold as
p
art of a lar
g
er software
p
acka
g
e but no co
py
o
f
o
ne or more of the Font Software t
yp
efaces ma
y
be sold b
y
itself
.
T
HE FONT SOFTWARE IS PROVIDED "AS IS"
,
WITHOUT WARRANTY OF
A
NY KIND
,
EXPRESS OR IMPLIED
,
INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY
,
FITNESS FOR A PARTICULAR PUR-
P
OSE AND NONINFRINGEMENT OF COPYRIGHT
,
PATENT
,
TRADEMARK
,
O
R
O
THER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDA-
T
ION BE LIABLE FOR ANY CLAIM
,
DAMAGES OR OTHER LIABILITY
,
INCLUD-
ING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES
,
WHETHER IN AN ACTION OF CONTRACT
,
TORT OR OTHER-
WISE
,
ARISING FROM
,
OUT OF THE USE OR INABILITY TO USE THE FONT
S
OFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE
.
Exce
p
t as contained in this notice, the names of Gnome, the Gnome Foundation
,
an
d
Bi
tstream
I
nc., s
h
a
ll
not
b
e use
d
i
n a
d
vert
i
s
i
n
g
or ot
h
erw
i
se to
p
romote t
h
e
sale, use or other dealin
g
s in this Font Software without
p
rior written authorization
from the Gnome Foundation or Bitstream Inc., res
p
ectivel
y
. For further information
,
c
ontact: fonts at
g
nome dot or
g.
x
m
lp
r
c
X
ML-RPC For C/C++ License
-------------------------
C
o
py
ri
g
ht
(
C
)
2001 b
y
First Peer, Inc. All ri
g
hts reserved
.
C
o
py
ri
g
ht
(
C
)
2001 b
y
Eric Kidd. All ri
g
hts reserved
.
Redistribution and use in source and binar
y
forms, with or without modifi cation
,
are
p
ermitted
p
rovided that the followin
g
conditions are met
:
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
/
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
/
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 5P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 5 2011/03/18 12:00:042011/03/18 12:00:04
1
. Redistributions of source code must retain the above copyright notice, this list o
f
conditions and the following disclaime
r
.
2. Redistributions in binary form must reproduce the above copyright notice, this
l
ist of conditions and the following disclaimer in the documentation and/or othe
r
mater
i
a
l
s prov
id
e
d
w
i
t
h
t
h
e
di
str
ib
ut
i
on
.
3
. The name of the author may not be used to endorse or promote products
d
erived from this software without specifi c prior written permission
.
T
HIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES
,
INCLUDING
,
BUT NOT
LIMITED TO
,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
N
ESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHAL
L
T
HE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT
,
INDIRECT
,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(
IN-
C
LUDING
,
BUT NOT LIMITED TO
,
PROCUREMENT OF SUBSTITUTE GOODS
O
R SERVICES
;
LOSS OF USE
,
DATA
,
OR PROFITS
;
OR BUSINESS INTERRUP-
T
ION
)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHE
R
IN CONTRACT, STRICT LIABILITY, OR TORT
(
INCLUDING NEGLIGENCE O
R
O
THERWISE
)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE
,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
.
P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 6P&F(with_Wireless)_OM_B4_OSS_B5_v1.indd 6 2011/03/18 12:00:042011/03/18 12:00:04
Meet Philips at the Internet
http://www.philips.com/support
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
IMPORTADOR: Sojitz Mexicana, S.A. de C.V.
Av. Paseo de las Palmas no. 239-302
Col. Lomas de Chapultepec, c.p. 11000
México, D.F. 52 (55) 5202 - 7222
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México C.P. 52787
EXPORTADOR : FUNAI ELECTRIC CO. L.T.D.
País de Origen : CHINA
Comercializado por : P&F Mexicana, S.A. DE C.V.
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
ANTES DE USAR SU APARATO.
ENERGIA
BDP5506 120 V ~ 60 Hz 20 W
Philips and Philips Shield are used under
license of Koninklijke Philips Electronics N.V.
★★★
E5WA0UD
E5WA0UD_EN_v3.book Page 62 Thursday, March 24, 2011 1:43 PM

Navigation menu