Phoenix Gold Speaker Sx110D2 Users Manual
SX110D4 to the manual 69f32863-7423-4291-80f1-359e9e1fa273
2015-02-02
: Phoenix-Gold Phoenix-Gold-Phoenix-Gold-Speaker-Sx110D2-Users-Manual-442242 phoenix-gold-phoenix-gold-speaker-sx110d2-users-manual-442242 phoenix-gold pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Subwoofer Manual Manuel de subwoofer Models: SX18s4, SX110d2, SX110d4, SX112d2, SX112d4 Features • • • • • • • • One Piece Polypropylene Dustcap High Temperature 2.5 Inch OFC Voice Coils (12 and 10 inch models) High Temperature 2.0 Inch OFC Voice Coil (8 inch model) Long Throw Rubber Surround Optimized for Sealed or Vented Enclosures Rigid Powder Coated Steel Frame Nickel Plated 12 Gauge Speaker Terminals High Excursion Motor Design Caractéristiques • Pare-poussière monopièce • Bobines acoustiques en cuivre exempt d’oxygène à haute température • Enceinte d’ambiance avec contour en caoutchouc de longue portée • Optimisé pour les boîtiers étanches ou porté • Panier rigide en acier • Bornes d’enceinte nickelées de calibre 12 • Modèle de moteur à grand battement Subwoofer Owner’s Manual Enclosures ENCLOSURE INFORMATION Phoenix Gold subwoofers are overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure is built to these same exacting standards. The enclosure must be constructed of at least .75 inch MDF for 10 and 12 inch subwoofers or .625 MDF for 8 inch subwoofers. Screws or air staples are excellent construction fasteners when used with a strong bonding “yellow” wood working glue that can fill joint gaps. Be sure that the enclosure’s panels are airtight at all joining seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufficient. Your PG dealer has extensive knowledge, tools and the experience needed for the design and construction necessary for your subwoofer application. We also recommend you consult with your dealer for specific technical assistance related to your installation. The charts provided should be used as a reference when building an enclosure for your subwoofer. The charts contain several enclosure types. The Sound Quality enclosure provides deeper, tighter, and more musical output to truly reproduce the original source material. The SPL enclosure fits the “basshead’s” need for maximum output while sacrificing some sound quality. The normal enclosure is a balance between SPL and SQ. INFORMATIONS SUR L’ENCEINTE Les caissons d’extrêmes graves sont fabriqués en fonction de normes rigoureuses afin de fournir des années de plaisir acoustique. Il est important que l’enceinte du caisson des extrêmes graves soit construite en fonction de ces mêmes normes rigoureuses. L’enceinte doit comprendre au moins un RP d’au moins 3/4” de pouces. Les vis ou agrafeuses pneumatiques constituent d’excellentes pièces de fixation lorsqu’elles sont utilisées avec une colle forte de couleur «jaune » pour le travail du bois qui peut combler les écarts de jointures. Assurez-vous que les panneaux de l’enceinte soient étanches au niveau de toutes les piqûres de liaison. Le revêtement des murs à l’aide d’une natte en polyester épaisse de 1 à 3 pouces suffit. Votre concessionnaire PG dispose de grandes connaissances, d’outils et d’expérience requise pour la conception et la constructions de votre application de caisson d’extrêmes graves. Nous recommandons également de consulter votre concessionnaire afin d’obtenir une assistance technique spécifique se rapportant à votre installation. Les tableaux fournis devraient être utilisés comme référence au moment de construire une enceinte pour votre caisson aux extrêmes graves PG. Les tableaux présentent plusieurs types d’enceinte. L’enceinte de Qualité du son offre une sortie de musique qui est plus profonde, plus serrée et davantage de sortie sonore afin de reproduire véritablement le matériau source d’origine. L’enceinte SPL satisfait le besoin en «basshead» pour une sortie maximale tout en sacrifiant un peu de la qualité du son. SEALED Enclosure recommendations SEALED VOLUME(cu.ft.) SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 SPL 0.3 0.4 0.75 Normal 0.4 0.6 1.1 SQ 0.6 0.8 1.5 SPL = More overall output and compact enclosure size, but sacrifices some low bass and smooth overall output Normal = Recommended for most listeners. Excellent blend of low bass, accurate and strong overall output SQ = Smooth and exceptional low bass output, but larger enclosure size and sacrifices some overall output Additional Notes: - For vented enclosures a subsonic filter set at 30Hz to 40Hz is highly recommended. - Sealed enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer. - Vented enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer. But DO NOT include displacement of the vent. - In many cases, a 4 inch round (3 or 2 inch for SX18s4) vent/port can be used instead of a rectangle/slot vent. This can reduce the vent length and simply the enclosure construction. However, in some rare cases at high power a small amount of port noise maybe audible. The provided slot/rectangle ports will provide maximum performance and the most predictable results. Contact technical support for additional enclosure options. www.phoenixgold.com Subwoofer Owner’s Manual Vented Enclosure Recommendations VENTED - SPL SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 .5 1.25 1.75 1.5 x 4 2 x 10 2 x 12 12 25.25 22 48Hz 42Hz 40Hz SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 .6 1.5 2.0 Vent Opening(in.) 1.5 x 4 2 x 10 2 x 12 Vent Length (in.) 14 25.5 25 43Hz 38Hz 35Hz SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 .8 2.0 2.5 Volume(cu.ft.) Vent Opening(in.) Vent Length(in.) Tuning Freq VENTED - Normal Volume(cu.ft.) Tuning Freq VENTED - SQ Volume(cu.ft.) Vent Opening(in.) 1.5 x 4 2 x 10 2 x 12 Vent Length(in.) 13.5 23 23 Tuning Freq 40Hz 34Hz 32Hz SYSTEM EXAMPLES SX112d4 or SX110d4 SINGLE SUBWOOFER SYSTEM Dual 4 ohm Subwoofer (wired in parallel) SX400.1 Terminal All voice coils are wired in parallel for 2 ohm load. SX400.1 makes maximum power into a 2 ohm load. + + Toutes les bobines mobiles sont câblées en parallèle de 2 Ohms. SX400.1 faire puissance maximale en 2 Ohms. - - SX112d4 or SX110d4 DUAL SUBWOOFER SYSTEM All voice coils are wired in parallel for 1 ohm load. SX600.1 makes maximum power into 1 ohm load. Toutes les bobines mobiles sont câblées en parallèle pour 1 Ohm. SX600.1 rend la puissance maximale de charge en 1 ohm. Dual 4 ohm Subwoofers (wired in parallel) SX600.1 Terminal + + + + - - - - www.phoenixgold.com Specifications T/S Parameters: SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 Re (Dcr) 3.8 1.1 1.85 1.1 1.85 FS (Hz) 40.2 28.9 29.2 31.2 31.4 Sd (SqM) .021 .033 .033 .051 .051 BL TM 12.2 9.4 11.5 9.0 10.6 Qms 7.96 4.87 4.56 4.11 4.51 Qes .714 .445 .519 .629 .79 Qts .66 .41 .47 .55 .67 Vas (liters) 9.22 23.64 22.6 41.19 39.22 Cms (uM/N) 141.97 152.78 146.17 111.21 105.88 Mms (gms) 110.36 198.09 203.94 234.34 243.10 89dB 90dB 90dB 90dB 90dB Dual 2 Dual 4 Dual 2 Dual 4 SPL Impedance Single 4 *Specifications subject to change Specifications: SX18s4 SX110d2 SX110d4 SX112d2 SX112d4 RMS Power Handling 200 watts 400 watts 400 watts Xmax (Peak to Peak) 30mm 35mm 35mm Mounting Diameter** 7 1/4in - 185mm 9 1/4in - 235mm 11 1/4in - 285mm Mounting Depth 4 3/8in - 110mm 5 7/8in - 148mm 6 3/8in - 160mm **Install Tip: Remove the rubber mounting gasket from the subwoofer and use it as a mouting hole template. Phoenix Gold A Division of AAMP of America™ 13190 56th Court Clearwater, Florida 33760 P: 866-788-4237 info@phoenixgold.com www.phoenixgold.com © 2013 AAMP of Florida, Inc Designed and Engineered in the USA LIMITED WARRANTY Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty. INTERNATIONAL WARRANTIES: Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact that country’s reseller for information.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2013:10:23 13:22:35+08:00 Metadata Date : 2013:10:23 13:22:40+08:00 Modify Date : 2013:10:23 13:22:40+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:a448c58d-96ab-4739-9f09-35d7356e7a83 Original Document ID : adobe:docid:indd:f3ae80e7-225f-11e2-9388-bf982ebedc38 Document ID : xmp.id:9FED5BF5A23BE3119B1DF9320568FB59 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9EED5BF5A23BE3119B1DF9320568FB59 Derived From Document ID : adobe:docid:indd:f3ae80e7-225f-11e2-9388-bf982ebedc38 Derived From Original Document ID: adobe:docid:indd:f3ae80e7-225f-11e2-9388-bf982ebedc38 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:10:23 13:22:35+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools