Phoenix Gold Speaker Sx110D2 Users Manual

SX110D4 to the manual 69f32863-7423-4291-80f1-359e9e1fa273

: Phoenix-Gold Phoenix-Gold-Phoenix-Gold-Speaker-Sx110D2-Users-Manual-442242 phoenix-gold-phoenix-gold-speaker-sx110d2-users-manual-442242 phoenix-gold pdf

Open the PDF directly: View PDF .
Page Count: 4

Subwoofer Manual

Manuel de subwoofer

Features Caractéristiques

Models: SX18s4, SX110d2, SX110d4, SX112d2, SX112d4

• OnePiecePolypropyleneDustcap

• HighTemperature2.5InchOFCVoiceCoils

 (12and10inchmodels)

• HighTemperature2.0InchOFCVoiceCoil

 (8inchmodel)

• LongThrowRubberSurround

• OptimizedforSealedorVentedEnclosures

• RigidPowderCoatedSteelFrame

• NickelPlated12GaugeSpeakerTerminals

• HighExcursionMotorDesign

• Pare-poussièremonopièce

• Bobinesacoustiquesencuivreexemptd’oxygène

àhautetempérature

• Enceinted’ambianceaveccontouren

caoutchoucdelongueportée

• Optimisépourlesboîtiersétanchesouporté

• Panierrigideenacier

• Bornesd’enceintenickeléesdecalibre12

• Modèledemoteuràgrandbattement

www.phoenixgold.com

SubwooferOwner’sManual

Enclosures

SEALED Enclosure recommendations

ENCLOSURE INFORMATION

Phoenix Gold subwoofers are overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure is built to these same exacting

standards. The enclosure must be constructed of at least .75 inch MDF for 10 and 12 inch subwoofers or .625 MDF for 8 inch subwoofers. Screws or air staples

are excellent construction fasteners when used with a strong bonding “yellow” wood working glue that can ll joint gaps. Be sure that the enclosure’s panels are

airtight at all joining seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufcient.

Your PG dealer has extensive knowledge, tools and the experience needed for the design and construction necessary for your subwoofer application. We also

recommend you consult with your dealer for specic technical assistance related to your installation. The charts provided should be used as a reference when

building an enclosure for your subwoofer. The charts contain several enclosure types. The Sound Quality enclosure provides deeper, tighter, and more musical

output to truly reproduce the original source material. The SPL enclosure ts the “basshead’s” need for maximum output while sacricing some sound quality.

The normal enclosure is a balance between SPL and SQ.

INFORMATIONS SUR L’ENCEINTE

Les caissons d’extrêmes graves sont fabriqués en fonction de normes rigoureuses an de fournir des années de plaisir acoustique. Il est important que

l’enceinte du caisson des extrêmes graves soit construite en fonction de ces mêmes normes rigoureuses. L’enceinte doit comprendre au moins un RP d’au

moins 3/4” de pouces. Les vis ou agrafeuses pneumatiques constituent d’excellentes pièces de xation lorsqu’elles sont utilisées avec une colle forte de

couleur «jaune » pour le travail du bois qui peut combler les écarts de jointures. Assurez-vous que les panneaux de l’enceinte soient étanches au niveau de

toutes les piqûres de liaison. Le revêtement des murs à l’aide d’une natte en polyester épaisse de 1 à 3 pouces suft.

Votre concessionnaire PG dispose de grandes connaissances, d’outils et d’expérience requise pour la conception et la constructions de votre application

de caisson d’extrêmes graves. Nous recommandons également de consulter votre concessionnaire an d’obtenir une assistance technique spécique se

rapportant à votre installation. Les tableaux fournis devraient être utilisés comme référence au moment de construire une enceinte pour votre caisson aux

extrêmes graves PG. Les tableaux présentent plusieurs types d’enceinte. L’enceinte de Qualité du son offre une sortie de musique qui est plus profonde, plus

serrée et davantage de sortie sonore an de reproduire véritablement le matériau source d’origine. L’enceinte SPL satisfait le besoin en «basshead» pour une

sortie maximale tout en sacriant un peu de la qualité du son.

SEALED

VOLUME(cu.ft.)

SX18s4 SX110d2

SX110d4

SX112d2

SX112d4

SPL 0.3 0.4 0.75

Normal 0.4 0.6 1.1

SQ 0.6 0.8 1.5

SPL = More overall output and compact enclosure size, but sacrices some low bass and smooth overall output

Normal = Recommended for most listeners. Excellent blend of low bass, accurate and strong overall output

SQ = Smooth and exceptional low bass output, but larger enclosure size and sacrices some overall output

Additional Notes:

- For vented enclosures a subsonic lter set at 30Hz to 40Hz is highly recommended.

- Sealed enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer.

- Vented enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer. But DO NOT include displacement of the vent.

- In many cases, a 4 inch round (3 or 2 inch for SX18s4) vent/port can be used instead of a rectangle/slot vent. This can reduce

the vent length and simply the enclosure construction. However, in some rare cases at high power a small amount of port noise

maybe audible. The provided slot/rectangle ports will provide maximum performance and the most predictable results. Contact

technical support for additional enclosure options.

-

www.phoenixgold.com

VENTED - SQ SX18s4 SX110d2

SX110d4

SX112d2

SX112d4

Volume(cu.ft.) .8 2.0 2.5

VentOpening(in.) 1.5x4 2x10 2x12

VentLength(in.) 13.5 23 23

TuningFreq 40Hz 34Hz 32Hz

VENTED - Normal SX18s4 SX110d2

SX110d4

SX112d2

SX112d4

Volume(cu.ft.) .6 1.5 2.0

VentOpening(in.) 1.5x4 2x10 2x12

VentLength(in.) 14 25.5 25

TuningFreq 43Hz 38Hz 35Hz

VENTED - SPL SX18s4 SX110d2

SX110d4

SX112d2

SX112d4

Volume(cu.ft.) .5 1.25 1.75

VentOpening(in.) 1.5x4 2x10 2x12

VentLength(in.) 12 25.25 22

TuningFreq 48Hz 42Hz 40Hz

SubwooferOwner’sManual

Vented Enclosure Recommendations

+

-

+

-

Allvoicecoilsarewiredinparallelfor2ohmload.

SX400.1makesmaximumpowerintoa2ohmload.

SX112d4 or SX110d4

SINGLE SUBWOOFER SYSTEM

Dual4ohmSubwoofer(wiredinparallel)

Dual4ohmSubwoofers(wiredinparallel)

SX112d4 or SX110d4

DUAL SUBWOOFER SYSTEM

Allvoicecoilsarewiredinparallelfor1ohmload.

SX600.1makesmaximumpowerinto1ohmload.

Touteslesbobinesmobilessontcâbléesenparallèlede2Ohms.

SX400.1fairepuissancemaximaleen2Ohms.

Touteslesbobinesmobilessontcâbléesenparallèlepour

1Ohm.SX600.1rendlapuissancemaximaledechargeen

1ohm.

SX400.1Terminal

SX600.1Terminal

SYSTEM EXAMPLES

+

-

+

-

+

-

+

PhoenixGold

ADivisionofAAMPofAmerica™

1319056thCourt

Clearwater,Florida33760

P:866-788-4237

info@phoenixgold.com

www.phoenixgold.com

©2013AAMPofFlorida,Inc

DesignedandEngineeredintheUSA

LIMITED WARRANTY

Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This

warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should

service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the

defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse,

product modication or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not

cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear

and tear is not covered under warranty.

INTERNATIONAL WARRANTIES:

Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold.

Consumers needing service or warranty information for these products must contact that country’s reseller for information.

Specifications

T/S Parameters: SX18s4 SX110d2 SX110d4 SX112d2 SX112d4

Re(Dcr) 3.8 1.1 1.85 1.1 1.85

FS(Hz) 40.2 28.9 29.2 31.2 31.4

Sd(SqM) .021 .033 .033 .051 .051

BLTM 12.2 9.4 11.5 9.0 10.6

Qms 7.96 4.87 4.56 4.11 4.51

Qes .714 .445 .519 .629 .79

Qts .66 .41 .47 .55 .67

Vas(liters) 9.22 23.64 22.6 41.19 39.22

Cms(uM/N) 141.97 152.78 146.17 111.21 105.88

Mms(gms) 110.36 198.09 203.94 234.34 243.10

SPL 89dB 90dB 90dB 90dB 90dB

Impedance Single4 Dual2 Dual4 Dual2 Dual4

Specications: SX18s4 SX110d2

SX110d4

SX112d2

SX112d4

RMSPowerHandling 200watts 400watts 400watts

Xmax(PeaktoPeak) 30mm 35mm 35mm

MountingDiameter** 71/4in-185mm 91/4in-235mm 111/4in-285mm

MountingDepth 43/8in-110mm 57/8in-148mm 63/8in-160mm

*Specications subject to change

**Install Tip: Remove the rubber mounting gasket from the subwoofer and use it as a mouting hole template.