Pilz and KG PSENSLP RFID Proximity switch User Manual FCC IC terms of use PSENSLP R2 0 2014 10 30
Pilz GmbH & Co. KG RFID Proximity switch FCC IC terms of use PSENSLP R2 0 2014 10 30
Contents
- 1. manual part1
- 2. manual part2
manual part2
![](/img.php?id=3238214&img=bg1.png)
FCC/IC - Terms of Use for Pilz Manuals PSEN slock (p)
2014-11-03, R2.0 Page 1 of 1
USA/Canada
FCC ID: VT8-PSENSLP
IC: 7482A-PSENSLP
FCC/IC-Requirements:
This product complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS
standards.
Operation is subject to the following two conditions:
1) this product may not cause harmful interference, and
2) this product must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications made to this product not expressly approved by Pilz may void the FCC
authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Le présent produit est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) le produit ne doit pas produire de brouillage, et
(2) l'utilisateur de le produit doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.