Pioneer K043 Double DIN iPhone Control Receiver User Manual
Pioneer Corporation Double DIN iPhone Control Receiver
Pioneer >
user manual
Important Information for the User
SPH-DA01
AppRadio
Be sure to read both this leaflet and Operation Manual
contained on the CD-ROM accompanying this
navigation system! Both documents include important
information that you must understand before using this
navigation system.
English
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Precaution
Information to User 3
–The Safety of Your Ears is in Your
Hands 4
–ESTABLISH A SAFE LEVEL: 4
–BE SURE TO OBSERVE THE
FOLLOWING GUIDELINES: 4
Terms used in this manual
“Front display”5
“microSD card”5
Important safety information
Additional safety information
To ensure safe driving 7
To avoid battery exhaustion 7
Rear view camera 7
Handling the microSD card 7
–microSD card, microSDHC card 7
Notes before using this product
Failure to operate 8
Visit our website 8
About this product 8
Appendix
iPod compatibility 9
Detailed information regarding connected
iPhone devices 9
–iPod and iPhone 9
–iTunes 9
Bluetooth 9
SD and SDHC logo 10
Specifications 11
Contents
En
2
Information to User
!This equipment complies with FCC/IC radia-
tion exposure limits set forth for an uncon-
trolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of
the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF en-
ergy that it deemed to comply without maxi-
mum permissive exposure evaluation
(MPE). But it is desirable that it should be
installed and operated keeping the radiator
at least 20 cm or more away from person’s
body (excluding extremities: hands, wrists,
feet and ankles).
!This transmitter must not be co-located or
operated in conjunction with any other an-
tenna or transmitter.
!Alteration or modifications carried out with-
out appropriate authorization may invali-
date the user’s right to operate the
equipment.
FCC ID : AJDKXXX
MODEL NO. : SPH-DA01
IC : 775E-KXXX
This device complies with Part 15 of FCC Rules
and Industry Canada licence-exempt RSS stan-
dard(s). Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of this device.
MADE IN CHINA
For Canadian model
This device complies with RSS-310 of Industry
Canada. Operation is subject to the condition
that this device does not cause harmful inter-
ference.
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce po-
tential radio interference to other users, the an-
tenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.
p.) is not more than that necessary for successful
communication.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruc-
tions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular in-
stallation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the equip-
ment off and on, the user is encouraged to try to
correct the interference by one or more of the fol-
lowing measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equip-
ment and receiver.
—Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH
THIS PRODUCT WILL INCREASE EYE HA-
ZARD.
En 3
English
Chapter
01
Precaution
WARNING
Handling the cord on this product or cords asso-
ciated with accessories sold with the product
may expose you to chemicals listed on proposi-
tion 65 known to the State of California and other
governmental entities to cause cancer and birth
defect or other reproductive harm. Wash hands
after handling.
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing
it at a safe level—a level that lets the sound
come through clearly without annoying blar-
ing or distortion and, most importantly, with-
out affecting your sensitive hearing. Sound
can be deceiving. Over time, your hearing
“comfort level”adapts to higher volumes of
sound, so what sounds “normal”can actually
be loud and harmful to your hearing. Guard
against this by setting your equipment at a
safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
!Set your volume control at a low setting.
!Slowly increase the sound until you can
hear it comfortably and clearly, without dis-
tortion.
!Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE
FOLLOWING GUIDELINES:
!Do not turn up the volume so high that you
can’t hear what’s around you.
!Use caution or temporarily discontinue use
in potentially hazardous situations.
!Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many areas.
En
4
Chapter
01 Precaution
“Front display”
In this manual, the screen that is attached to
the body of this product will be referred to as
the “Front display”.
“microSD card”
The microSD card and microSDHC card are
collectively referred to as the “microSD
card”.
En 5
English
Chapter
02
Terms used in this manual
WARNING
!Do not attempt to install or service this pro-
duct by yourself. Installation or servicing of
this product by persons without training and
experience in electronic equipment and auto-
motive accessories may be dangerous and
could expose you to the risk of electric shock
or other hazards.
!If liquid or foreign matter should get inside
this product, park your vehicle to safe place
and turn the ignition switch off (ACC OFF) im-
mediately and consult your dealer or the near-
est authorized Pioneer Service Station. Do not
use this product in this condition because
doing so may result in a fire, electric shock, or
other failure.
!If you notice smoke, a strange noise or odor
from this product, or any other abnormal
signs on the LCD screen, turn off the power
immediately and consult your dealer or the
nearest authorized Pioneer Service Station.
Using this product in this condition may result
in permanent damage to the system.
!Do not disassemble or modify this product, as
there are high-voltage components inside
which may cause an electric shock. Be sure
to consult your dealer or the nearest author-
ized Pioneer Service Station for internal in-
spection, adjustments or repairs.
!Do not allow this product to come into contact
with liquids. Electrical shock could result.
Also, damage to the product, smoke, and over-
heating could result from contact with liquids.
Before using this product, be sure to read and
fully understand the following safety informa-
tion:
!Read the entire manual before using this
product.
!Do not operate this product (or the rear
view camera option if purchased) if doing
so will divert your attention in any way from
the safe operation of your vehicle. Always
observe safe driving rules and follow all ex-
isting traffic regulations. If you experience
difficulty in operating the system or reading
the display, park your vehicle in a safe loca-
tion and apply the parking brake before
making the necessary adjustments.
!Never allow others to use this product un-
less they have read and understood the op-
erating instructions.
!Never set the volume of this product so
high that you cannot hear outside traffic
and emergency vehicles.
!To promote safety, certain functions are dis-
abled unless the vehicle is stopped and/or
the parking brake is applied.
!Keep this manual handy as a reference for
operating procedures and safety informa-
tion.
!Pay close attention to all warnings in this
manual and follow the instructions care-
fully.
!Do not install this product where it may (i)
obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operat-
ing systems or safety features, including
airbags, hazard lamp buttons or (iii) impair
the driver’s ability to safely operate the vehi-
cle.
!Please remember to fasten your seat belt at
all times while operating your vehicle. If
you are ever in an accident, your injuries
can be considerably more severe if your
seat belt is not properly buckled.
!Never use headphones while driving.
En
6
Chapter
03 Important safety information
To ensure safe driving
WARNING
!GREEN/WHITE LEAD AT POWER CON-
NECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CON-
NECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IM-
PROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS IN-
JURY OR DAMAGE.
!To avoid the risk of damage and injury and the
potential violation of applicable laws, this pro-
duct is not for use with a video image that is
visible to the driver.
!In some countries or states the viewing of
Video image on a display inside a vehicle even
by persons other than the driver may be ille-
gal. Where such regulations apply, they must
be obeyed.
!When applying the parking brake in order to
view video image or to enable other functions
offered by this product, park your vehicle in a
safe place, and keep the brake pedal pushed
down before releasing the parking brake if the
vehicle is parked on a hill or otherwise might
move when releasing the parking brake.
When you attempt to watch video image while
driving, the warning “Viewing of front seat
video source while driving is strictly pro-
hibited.”will appear on the screen. To watch
video image on this display, stop the vehicle in
a safe place and apply the parking brake.
Please keep the brake pedal pushed down be-
fore releasing the parking brake.
To avoid battery exhaustion
Be sure to run the vehicle engine while using
this product. Using this product without run-
ning the engine can drain the battery.
WARNING
Do not install this product with vehicles that do
not feature an ACC position.
Rear view camera
With an optional rear view camera, you are
able to use this product as an aid to keep an
eye on trailers, or backing into a tight parking
spot.
WARNING
!SCREEN IMAGE MAY APPEAR REVERSED.
!USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
CAUTION
!For safety reasons, the rear view camera func-
tion is not available until this product boots
up completely.
!The rear view mode is to use this product as
an aid to keep an eye on the trailers, or while
backing up. Do not use this function for enter-
tainment purposes.
Handling the microSD card
CAUTION
!Keep the microSD card out of the reach of
small children to prevent them from acciden-
tally swallowing it.
!To prevent data loss and damage to the sto-
rage device, never remove it from this product
while data is being transferred.
!If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
!Never insert or eject an microSD card while
driving.
!Do not leave the microSD card in any location
with high temperatures.
microSD card, microSDHC card
=For details about SD memory card compat-
ibility with this navigation system, refer to
Specifications on page 11.
En 7
English
Chapter
04
Additional safety information
Important (Serial Number:)
The serial number of this device is located on the
bottom of this product. For your own security and
convenience, be sure to record this number on
the enclosed warranty card.
Failure to operate
Should the navigation system fail to operate
properly, contact your dealer or nearest
authorized Pioneer Service Station.
After-sales service for Pioneer products
Please contact the dealer or distributor from
which you purchased the product for after-
sales service (including warranty conditions)
or any other information. In case the necessary
information is not available, please contact the
companies listed below.
Please do not ship your product to the compa-
nies at the addresses listed below for repair
without making advance contact.
!U.S.A
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404
!CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway Markham, Ontario
L3R 0P2
1-877-283-5901
905-479-4411
For warranty information, please see the Lim-
ited Warranty sheet included with your pro-
duct.
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
In Canada
http://www.pioneerelectronics.ca
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owner’s manuals, order product
catalogs, research new products, and much
more.
4 Receive notices of software upgrades and
software updates.
About this product
!This product does not work correctly in
areas other than Europe, Russia and Aus-
tralia. The RDS (Radio Data System) func-
tion operates only in areas with FM stations
broadcasting RDS signals. The RDS-TMC
service can also be used in the area where
there is a station that broadcasts the RDS-
TMC signal.
The names of private corporations, pro-
ducts and other entities described herein
are the registered trademarks or trade-
marks of their respective firms.
=For more information, refer to Operation
Manual.
En
8
Chapter
05 Notes before using this product
iPod compatibility
This product supports only the following
iPhone models and iPhone software versions.
Others may not work correctly.
Made for
!iPhone 4: Ver. 4.1
!iPod touch (4th generation): Ver. 4.1
pIn this manual, iPod and iPhone will be re-
ferred to as iPhone.
pOperation methods may vary depending on
the iPhone models and the software ver-
sion of iPhone.
pDepending on the software version of the
iPhone, it may not be compatible with this
equipment.
For details about iPhone compatibility with
this product, refer to the information on our
website.
Detailed information
regarding connected
iPhone devices
CAUTION
!Pioneer accepts no responsibility for data lost
from an iPhone, even if that data is lost while
using this product. Please back up your
iPhone data regularly.
!Do not leave the iPhone in direct sunlight for
extended amounts of time. Extended exposure
to direct sunlight can result in iPhone mal-
function due to the resulting high tempera-
ture.
!Do not leave the iPhone in any location with
high temperatures.
!Firmly secure the iPhone when driving. Do not
let the iPhone fall onto the floor, where it may
become jammed under the brake or gas
pedal.
For details, refer to the iPhone manuals.
iPod and iPhone
“Made for iPod”and “Made for iPhone”mean
that an electronic accessory has been de-
signed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
iPod or iPhone may affect wireless perfor-
mance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
iTunes
iTunes is a trademark of Apple Inc., registered
in the U.S. and other countries.
Bluetooth
En 9
English
Appendix
Appendix
Bluetooth is a short-range wireless radio con-
nectivity technology that is developed as a
cable replacement for cellular phones, hand-
held PCs and other devices. Bluetooth oper-
ates in 2.4 GHz frequency range and transmits
voice and data at speeds up to 1 megabit per
second. Bluetooth was launched by a special
interest group (SIG) comprising Ericsson Inc.,
Intel Corp., Nokia Corp., Toshiba and IBM in
1998, and it is currently developed by nearly
2 000 companies worldwide.
!The Bluetooth®word mark and logos are re-
gistered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Pioneer Corporation is under license. Other
trademarks and trade names are those of
their respective owners.
SD and SDHC logo
microSD Logo is a trademark of SD-3C, LLC.
microSDHC Logo is a trademark of SD-3C,
LLC.
En
10
Appendix
Appendix
Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 V to 14.4 V DC)
Grounding system ................... Negative type
Maximum current consumption
........................................... 10.0 A
Dimensions (W × H × D):
Chassis ............................... 178 mm × 100 mm ×
165 mm
Nose ..................................... 170 mm × 96 mm × 20 mm
Weight .......................................... 2.81 kg
NAND flash memory ............. 4GB
Navigation
GPS receiver:
System ................................ L1, C/Acode GPS
SPS (Standard Positioning
Service)
Reception system .......... 32-channel multi-channel
reception system
Reception frequency .... 1 575.42 MHz
Sensitivity .......................... –140 dBm (typ)
Position update frequency
........................................... Approx. once per second
GPS antenna:
Antenna ............................. Micro strip flat antenna/
right-handed helical polari-
zation
Antenna cable ................. 3.55 m
Dimensions (W × H × D)
........................................... 33 mm × 15 mm × 36 mm
Weight ................................ 73.7 g
Display
Screen size/aspect ratio ....... 7 inch wide/16:9
(effective display area:
157 mm × 83 mm)
Pixels ............................................. 384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Color system .............................. PAL/NTSC compatible
Tolerable temperature range:
Power on ............................ –10 °C to +60 °C
Power off ............................ –20 °C to +80 °C
Audio
Maximum power output ....... 50 W × 4
50 W × 2 ch/4 W+70W×
1 ch/2 W(for subwoofer)
Continuous power output ... 22 W × 4 (50 Hz to 15 kHz,
5 %THD, 4 WLOAD, Both
Channels Driven)
Load impedance ...................... 4W(4 Wto 8 W[2 Wfor 1 ch]
allowable)
Preout output level (max) .... 4.0 V
Preout impedance .................. 1kW
Equalizer (8-Band Graphic Equalizer):
Frequency .......................... 40 Hz/80 Hz/200 Hz/400 Hz/
1 kHz/2.5 kHz/8 kHz/10 kHz
Gain ...................................... ±12 dB
Loudness contour:
Low ....................................... +3.5 dB (100 Hz), +3 dB
(10 kHz)
Mid ....................................... +10 dB (100 Hz), +6.5 dB
(10 kHz)
High ..................................... +11 dB (100 Hz), +11 dB
(10 kHz)
(volume: –30 dB)
HPF:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... –12 dB/oct
Subwoofer:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... –24/+6 dB
Phase .................................. Normal/Reverse
Bass boost:
Gain ...................................... 0dBto+12dB
USB
USB standard spec. ............... USB 2.0 High Speed
Max current supply ................. 1A
File system .................................. FAT16, FAT32
USB class .................................... Mass storage class
Decoding format ...................... MP3/WMA/AAC/WAVE/
H.264/MPEG4/WMV
SD
microSD card, microSDHC card
Compatible physical format
..................................................... Version 2.00
File system .................................. FAT16, FAT32
Decoding format ...................... MP3/WMA/AAC/WAVE/
H.264/MPEG4/WMV
Bluetooth
Version .......................................... Bluetooth 2.0+EDR
Output power ............................ +4 dBm Max.
(Power class 2)
En 11
English
Appendix
Appendix
FM tuner
Frequency range ...................... 87.5 MHz to 108.0 MHz
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 72 dB (IEC-A network)
Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)
Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)
Usable sensitivity ..................... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 28 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
CEA2006 Specifications
Power output ............................. 14 W RMS × 4 Channels
(4 Wand ≦1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
4W)
Note
Specifications and design are subject to possible
modifications without notice due to im-
provements.
En
12
Appendix
Appendix
En 13
English
En
14
En 15
English
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
總公司:台北市中山北路二段44號13樓
電話: (02) 2521-3588
先鋒電子（香港）有限公司
香港九龍尖沙咀海港城世界商業中心9樓901-6室
電話: (0852) 2848-6488
© 2011PIONEER CORPORATION.
All rights reserved.
Printed in China
<127075003311> UC
<KMZZX> <11C00000>