Pioneer K043 Double DIN iPhone Control Receiver User Manual
Pioneer Corporation Double DIN iPhone Control Receiver
Pioneer >
user manual
SPH-DA01 AppRadio Be sure to read both this leaflet and Operation Manual contained on the CD-ROM accompanying this navigation system! Both documents include important information that you must understand before using this navigation system. English Important Information for the User Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Precaution Information to User 3 – The Safety of Your Ears is in Your Hands 4 – ESTABLISH A SAFE LEVEL: 4 – BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: 4 Terms used in this manual “Front display” 5 “microSD card” 5 Important safety information Additional safety information To ensure safe driving 7 To avoid battery exhaustion 7 Rear view camera 7 Handling the microSD card 7 – microSD card, microSDHC card 7 Notes before using this product Failure to operate 8 Visit our website 8 About this product 8 Appendix iPod compatibility 9 Detailed information regarding connected iPhone devices 9 – iPod and iPhone 9 – iTunes 9 Bluetooth 9 SD and SDHC logo 10 Specifications 11 En Chapter Precaution ! This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). ! This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. ! Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. FCC ID : AJDKXXX MODEL NO. : SPH-DA01 IC : 775E-KXXX This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. MADE IN CHINA For Canadian model This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r. p.) is not more than that necessary for successful communication. English Information to User 01 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of En Chapter 01 Precaution WARNING Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling. The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. ESTABLISH A SAFE LEVEL: ! Set your volume control at a low setting. ! Slowly increase the sound until you can hear it comfortably and clearly, without distortion. ! Once you have established a comfortable sound level, set the dial and leave it there. BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: ! Do not turn up the volume so high that you can’t hear what’s around you. ! Use caution or temporarily discontinue use in potentially hazardous situations. ! Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas. En Chapter Terms used in this manual 02 English “Front display” In this manual, the screen that is attached to the body of this product will be referred to as the “Front display”. “microSD card” The microSD card and microSDHC card are collectively referred to as the “microSD card”. En Chapter 03 Important safety information WARNING ! Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. ! If liquid or foreign matter should get inside this product, park your vehicle to safe place and turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure. ! If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system. ! Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs. ! Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids. Before using this product, be sure to read and fully understand the following safety information: ! Read the entire manual before using this product. ! Do not operate this product (or the rear view camera option if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating the system or reading En the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments. Never allow others to use this product unless they have read and understood the operating instructions. Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles. To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied. Keep this manual handy as a reference for operating procedures and safety information. Pay close attention to all warnings in this manual and follow the instructions carefully. Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including airbags, hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle. Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. Never use headphones while driving. Chapter Additional safety information WARNING ! GREEN/WHITE LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. ! To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver. ! In some countries or states the viewing of Video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. ! When applying the parking brake in order to view video image or to enable other functions offered by this product, park your vehicle in a safe place, and keep the brake pedal pushed down before releasing the parking brake if the vehicle is parked on a hill or otherwise might move when releasing the parking brake. When you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product with vehicles that do not feature an ACC position. Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. English To ensure safe driving 04 WARNING ! SCREEN IMAGE MAY APPEAR REVERSED. ! USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION ! For safety reasons, the rear view camera function is not available until this product boots up completely. ! The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes. Handling the microSD card CAUTION ! Keep the microSD card out of the reach of small children to prevent them from accidentally swallowing it. ! To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. ! If data loss or corruption occurs on the storage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. ! Never insert or eject an microSD card while driving. ! Do not leave the microSD card in any location with high temperatures. microSD card, microSDHC card = For details about SD memory card compatibility with this navigation system, refer to Specifications on page 11. En Chapter 05 Notes before using this product Important (Serial Number:) The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card. Failure to operate Should the navigation system fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. ! U.S.A Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 ! CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT 300 Allstate Parkway Markham, Ontario L3R 0P2 1-877-283-5901 905-479-4411 For warranty information, please see the Limited Warranty sheet included with your product. En Visit our website Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca 1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates. About this product ! This product does not work correctly in areas other than Europe, Russia and Australia. The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. The RDS-TMC service can also be used in the area where there is a station that broadcasts the RDSTMC signal. The names of private corporations, products and other entities described herein are the registered trademarks or trademarks of their respective firms. = For more information, refer to Operation Manual. Appendix Appendix This product supports only the following iPhone models and iPhone software versions. Others may not work correctly. Made for ! iPhone 4: Ver. 4.1 ! iPod touch (4th generation): Ver. 4.1 p In this manual, iPod and iPhone will be referred to as iPhone. p Operation methods may vary depending on the iPhone models and the software version of iPhone. p Depending on the software version of the iPhone, it may not be compatible with this equipment. For details about iPhone compatibility with this product, refer to the information on our website. Detailed information regarding connected iPhone devices CAUTION ! Pioneer accepts no responsibility for data lost from an iPhone, even if that data is lost while using this product. Please back up your iPhone data regularly. ! Do not leave the iPhone in direct sunlight for extended amounts of time. Extended exposure to direct sunlight can result in iPhone malfunction due to the resulting high temperature. ! Do not leave the iPhone in any location with high temperatures. ! Firmly secure the iPhone when driving. Do not let the iPhone fall onto the floor, where it may become jammed under the brake or gas pedal. English iPod compatibility iPod and iPhone “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iTunes iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. Bluetooth For details, refer to the iPhone manuals. En Appendix Appendix Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for cellular phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprising Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2 000 companies worldwide. ! The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners. SD and SDHC logo microSD Logo is a trademark of SD-3C, LLC. microSDHC Logo is a trademark of SD-3C, LLC. 10 En Appendix Appendix General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system ................... Negative type Maximum current consumption ........................................... 10.0 A Dimensions (W × H × D): Chassis ............................... 178 mm × 100 mm × 165 mm Nose ..................................... 170 mm × 96 mm × 20 mm Weight .......................................... 2.81 kg NAND flash memory ............. 4 GB Navigation GPS receiver: System ................................ L1, C/Acode GPS SPS (Standard Positioning Service) Reception system .......... 32-channel multi-channel reception system Reception frequency .... 1 575.42 MHz Sensitivity .......................... –140 dBm (typ) Position update frequency ........................................... Approx. once per second GPS antenna: Antenna ............................. Micro strip flat antenna/ right-handed helical polarization Antenna cable ................. 3.55 m Dimensions (W × H × D) ........................................... 33 mm × 15 mm × 36 mm Weight ................................ 73.7 g Display Screen size/aspect ratio ....... 7 inch wide/16:9 (effective display area: 157 mm × 83 mm) Pixels ............................................. 384 000 (800 × 480) Display method ........................ TFT Active matrix driving Backlight ..................................... LED Color system .............................. PAL/NTSC compatible Tolerable temperature range: Power on ............................ –10 °C to +60 °C Power off ............................ –20 °C to +80 °C Continuous power output ... 22 W × 4 (50 Hz to 15 kHz, 5 %THD, 4 W LOAD, Both Channels Driven) Load impedance ...................... 4 W (4 W to 8 W [2 W for 1 ch] allowable) Preout output level (max) .... 4.0 V Preout impedance .................. 1 kW Equalizer (8-Band Graphic Equalizer): Frequency .......................... 40 Hz/80 Hz/200 Hz/400 Hz/ 1 kHz/2.5 kHz/8 kHz/10 kHz Gain ...................................... ±12 dB Loudness contour: Low ....................................... +3.5 dB (100 Hz), +3 dB (10 kHz) Mid ....................................... +10 dB (100 Hz), +6.5 dB (10 kHz) High ..................................... +11 dB (100 Hz), +11 dB (10 kHz) (volume: –30 dB) HPF: Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/ 125 Hz Slope .................................... –12 dB/oct Subwoofer: Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/ 125 Hz Slope .................................... –18 dB/oct Gain ...................................... –24/+6 dB Phase .................................. Normal/Reverse Bass boost: Gain ...................................... 0 dB to +12 dB English Specifications USB USB standard spec. ............... USB 2.0 High Speed Max current supply ................. 1 A File system .................................. FAT16, FAT32 USB class .................................... Mass storage class Decoding format ...................... MP3/WMA/AAC/WAVE/ H.264/MPEG4/WMV SD microSD card, microSDHC card Compatible physical format ..................................................... Version 2.00 File system .................................. FAT16, FAT32 Decoding format ...................... MP3/WMA/AAC/WAVE/ H.264/MPEG4/WMV Audio Bluetooth Maximum power output ....... 50 W × 4 50 W × 2 ch/4 W + 70 W × 1 ch/2 W (for subwoofer) Version .......................................... Bluetooth 2.0+EDR Output power ............................ +4 dBm Max. (Power class 2) En 11 Appendix Appendix FM tuner Frequency range ...................... 87.5 MHz to 108.0 MHz Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono, S/N: 30 dB) Signal-to-noise ratio ............... 72 dB (IEC-A network) Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz, stereo) 0.1 % (at 65 dBf, 1 kHz, mono) Frequency response ............... 30 Hz to 15 000 Hz (±3 dB) Stereo separation .................... 45 dB (at 65 dBf, 1 kHz) MW tuner Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz) Usable sensitivity ..................... 25 µV (S/N: 20 dB) Signal-to-noise ratio ............... 62 dB (IEC-A network) LW tuner Frequency range ...................... 153 kHz to 281 kHz Usable sensitivity ..................... 28 µV (S/N: 20 dB) Signal-to-noise ratio ............... 62 dB (IEC-A network) CEA2006 Specifications Power output ............................. 14 W RMS × 4 Channels (4 W and ≦ 1 % THD+N) S/N ratio ....................................... 91 dBA (reference: 1 W into 4 W) Note Specifications and design are subject to possible modifications without notice due to improvements. 12 En English 13 En 14 En English 15 En PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 先鋒股份有限公司 總公司 : 台北市中山北路二段44號13樓 電話 : (02) 2521-3588 先鋒電子(香港)有限公司 香港九龍尖沙咀海港城世界商業中心9樓901-6室 電話 : (0852) 2848-6488 © 2011PIONEER CORPORATION. All rights reserved. Printed in China<11C00000> <127075003311> UC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Create Date : 2011:05:19 17:13:55-07:00 Modify Date : 2011:05:19 17:15:30-07:00 Metadata Date : 2011:05:19 17:15:30-07:00 Producer : iTextSharp 5.0.4 (c) 1T3XT BVBA Format : application/pdf Document ID : uuid:fc815a5a-d7a2-47a4-be5e-6b0da3ac4c00 Instance ID : uuid:172359b4-f425-4075-a9cb-356edc2fe4ff Has XFA : No Page Count : 16EXIF Metadata provided by EXIF.tools