Pioneer T101 Digital Wireless Speaker Transmitter User Manual WSS

Pioneer Corporation Digital Wireless Speaker Transmitter WSS

Manual

Operating InstructionsMode d’emploiDigital Wireless Speaker SystemEnsemble d’enceintes sans fil pour transmission numérique XW-DV515Digital Wireless Rear Speaker SystemEnsemble d’enceintes arrière sans fil pour transmission numériqueXW-HTD630WSS.book Page 1 Friday, March 7, 2003 5:57 PM
READ INSTRUCTIONS — All the safety andoperating instructions should be read beforethe product is operated.RETAIN INSTRUCTIONS — The safety andoperating instructions should be retained forfuture reference.HEED WARNINGS — All warnings on theproduct and in the operating instructions shouldbe adhered to.FOLLOW INSTRUCTIONS — All operating anduse instructions should be followed.CLEANING — Unplug this product from the walloutlet before cleaning. The product should becleaned only with a polishing cloth or a soft drycloth. Never clean with furniture wax, benzine,insecticides or other volatile liquids since theymay corrode the cabinet.ATTACHMENTS — Do not use attachments notrecommended by the product manufacturer asthey may cause hazards.WATER AND MOISTURE — Do not use thisproduct near water — for example, near abathtub, wash bowl, kitchen sink, or laundrytub; in a wet basement; or near a swimmingpool; and the like.ACCESSORIES — Do not place this product onan unstable cart, stand, tripod, bracket, or table.The product may fall, causing serious injury to achild or adult, and serious damage to theproduct. Use only with a cart, stand, tripod,bracket, or table recommended by themanufacturer, or sold with the product. Anymounting of the product should follow themanufacturer’s instructions, and should use amounting accessory recommended by themanufacturer.CART — A product and cartcombination should be moved withcare. Quick stops, excessive force,and uneven surfaces may cause theproduct and cart combination tooverturn.VENTILATION — Slots and openings in thecabinet are provided for ventilation and toensure reliable operation of the product and toprotect it from overheating, and these openingsmust not be blocked or covered. The openingsshould never be blocked by placing the producton a bed, sofa, rug, or other similar surface.This product should not be placed in a built-ininstallation such as a bookcase or rack unlessproper ventilation is provided or themanufacturer’s instructions have been adheredto.POWER SOURCES — This product should beoperated only from the type of power sourceindicated on the marking label. If you are notsure of the type of power supply to your home,consult your product dealer or local powercompany.LOCATION – The appliance should be installedin a stable location.NONUSE PERIODS – The power cord of theappliance should be unplugged from the outletwhen left unused for a long period of time.GROUNDING OR POLARIZATION• If this product is equipped with a polarizedalternating current line plug (a plug having oneblade wider than the other), it will fit into theoutlet only one way. This is a safety feature. Ifyou are unable to insert the plug fully into theoutlet, try reversing the plug. If the plug shouldstill fail to fit, contact your electrician to replaceyour obsolete outlet. Do not defeat the safetypurpose of the polarized plug.• If this product is equipped with a three-wiregrounding type plug, a plug having a third(grounding) pin, it will only fit into a groundingtype power outlet. This is a safety feature. Ifyou are unable to insert the plug into the outlet,contact your electrician to replace yourobsolete outlet. Do not defeat the safetypurpose of the grounding type plug.IMPORTANT SAFETY INSTRUCTIONSThe lightning flash with arrowheadsymbol, within an equilateraltriangle, is intended to alert theuser to the presence of uninsulated“dangerous voltage” within theproduct's enclosure that may be ofsufficient magnitude to constitutea risk of electric shock to persons.IMPORTANTCAUTION:TO PREVENT THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICEPERSONNEL.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating andmaintenance (servicing)instructions in the literatureaccompanying the appliance.H002_EnRISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONWSS.book Page 2 Friday, March 7, 2003 5:57 PM
POWER-CORD PROTECTION — Power-supplycords should be routed so that they are notlikely to be walked on or pinched by itemsplaced upon or against them, paying particularattention to cords at plugs, conveniencereceptacles, and the point where they exit fromthe product.LIGHTNING — For added protection for thisproduct during a lightning storm, or when it isleft unattended and unused for long periods oftime, unplug it from the wall outlet anddisconnect the antenna or cable system. Thiswill prevent damage to the product due tolightning and power-line surges.POWER LINES — An outside antenna systemshould not be located in the vicinity ofoverhead power lines or other electric light orpower circuits, or where it can fall into suchpower lines or circuits. When installing anoutside antenna system, extreme care shouldbe taken to keep from touching such powerlines or circuits as contact with them might befatal.OVERLOADING — Do not overload wall outlets,extension cords, or integral conveniencereceptacles as this can result in a risk of fire orelectric shock.OBJECT AND LIQUID ENTRY — Never pushobjects of any kind into this product throughopenings as they may touch dangerous voltagepoints or short-out parts that could result in afire or electric shock. Never spill liquid of anykind on the product.SERVICING — Do not attempt to service thisproduct yourself as opening or removing coversmay expose you to dangerous voltage or otherhazards. Refer all servicing to qualified servicepersonnel.DAMAGE REQUIRING SERVICE — Unplug thisproduct from the wall outlet and refer servicing[For U.S. model]IMPORTANT NOTICEThe serial number for this equipment is locatedon the rear case. Please write this serialnumber on your enclosed warranty card andkeep it in a secure area. This is for yoursecurity. H006A_Ento qualified service personnel under thefollowing conditions:• When the power-supply cord or plug isdamaged.• If liquid has been spilled, or objects have falleninto the product.• If the product has been exposed to rain orwater.• If the product does not operate normally byfollowing the operating instructions. Adjust onlythose controls that are covered by theoperating instructions as an improperadjustment of other controls may result indamage and will often require extensive workby a qualified technician to restore the productto its normal operation.• If the product has been dropped or damaged inany way.• When the product exhibits a distinct change inperformance — this indicates a need forservice.REPLACEMENT PARTS — When replacementparts are required, be sure the servicetechnician has used replacement partsspecified by the manufacturer or have thesame characteristics as the original part.Unauthorized substitutions may result in fire,electric shock, or other hazards.SAFETY CHECK — Upon completion of anyservice or repairs to this product, ask theservice technician to perform safety checks todetermine that the product is in properoperating condition.WALL OR CEILING MOUNTING — The productshould not be mounted to a wall or ceiling.HEAT — The product should be situated awayfrom heat sources such as radiators, heatregisters, stoves, or other products (includingamplifiers) that produce heat.WARNING: THIS APPARATUS IS NOT WATERPROOF. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS APPARATUS, SUCH AS VASES, FLOWER POTS, COSMETICS CONTAINERS, MEDICINE BOTTLES, ETC. WARNING:Handling the cord on this product or cordsassociated with accessories sold with theproduct will expose you to lead, a chemicalknown to the State of California and othergovernmental entities to cause cancer andbirth defects or other reproductive harm.Wash hands after handlingEnglishWSS.book Page 3 Friday, March 7, 2003 5:57 PM
[For Canadian model]This Class B digital apparatus complies withCanadian ICES-003.[Pour le modèle Canadien]Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada.H009_2LNOTE: This equipment has been tested andfound to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCCRules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses, and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try to correct the interferenceby one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between theequipment and receiver.– Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help. H010_EnCAUTION:This product satisfies FCC regulations whenshielded cables and connectors are used toconnect the unit to other equipment. Toprevent electromagnetic interference withelectric appliances such as radios andtelevisions, use shielded cables and connec-tors for connections. H012_EnInformation to UserAlteration or modifications carried out withoutappropriate authorization may invalidate theuser's right to operate the equipment. H011_En[For Canadian model]CAUTION: TO PREVENT ELECTRIC SHOCK, DONOT USE THIS (POLARIZED) PLUG WITH ANEXTENSION CORD, RECEPTACLE OR OTHEROUTLET UNLESS THE BLADES CAN BE FULLYINSERTED TO PREVENT BLADE EXPOSURE.ATTENTION: POUR PREVENIR LES CHOCSELECTRIQUES NE PAS UTILISER CETTE FICHEPOLARISEE AVEC UN PROLONGATEUR UNEPRISE DE COURANT OU UNE AUTRE SORTIEDE COURANT, SAUF SI LES LAMES PEUVENTETRE INSEREES A FOND SANS EN LAISSERAUCUNE PARTIE A DECOUVERT. H007A_2LWARNING: BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. THE VOLTAGE OF THE AVAILABLE POWER SUPPLY DIFFERS ACCORDING TO COUNTRY OR REGION. BE SURE THAT THE POWER SUPPLY VOLTAGE OF THE AREA WHERE THIS UNIT WILL BE USED MEETS THE REQUIRED VOLTAGE (E.G., 230V OR 120V) WRITTEN ON THE REAR PANEL. H041A_EnOperating Environment H045_EnOperating environment temperature and humidity:+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH (cooling vents not blocked)Do not install in the following locations÷Location exposed to direct sunlight or strong ÷artificial light÷Location exposed to high humidity, or poorlyventilated locationWARNING: NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLE, SHOULD BE PLACED ON THE APPARATUS. IF NAKED FLAME SOURCES ACCIDENTALLY FALL DOWN, FIRE SPREAD OVER THE APPARATUS THEN MAY CAUSE FIRE. H044_EnVENTILATION:When installing this unit, make sure toleave space around the unit for ventilationto improve heat radiation (at least 10 cm attop, 10 cm at rear, and 10 cm at each side).WARNING: Slot and openings in thecabinet are provided for ventilation and toensure reliable operation of the productand to protect it from overheating, toprevent fire hazard, the openings shouldnever be blocked and covered with items,such as newspapers, table-cloths, curtains,etc. Also do not put the apparatus on thethick carpet, bed, sofa, or fabric having athick pile. H040 EnWSS.book Page 4 Friday, March 7, 2003 5:57 PM
Declaration of Conformity with regard to the R&TTE Directive 1999/5/ECManufacturer: Pioneer Corporation4-1, 1-chome, Meguro, Meguro-ku153-8654 TOKYO, JAPANEU Representative’s: Pioneer Europe NVHaven 1087, Keetberglaan 1, 9120 MELSELE, BELGIUMEnglish Hereby, Pioneer, declares that this Digital Wireless Speaker System XW-DV515 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Suomi Pioneer vakuuttaa täten että Digital Wireless Speaker System XW-DV515 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Nederlands Hierbij verklaart Pioneer dat het toestel Digital Wireless Speaker System XW-DV515 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Français Par la présente Pioneer déclare que l'appareil Digital Wireless Speaker System XW-DV515 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Svenska Härmed intygar Pioneer att denna Digital Wireless Speaker System XW-DV515 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Dansk Undertegnede Pioneer erklærer herved, at følgende udstyr Digital Wireless Speaker System XW-DV515 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch Hiermit erklärt Pioneer, dass sich dieses Digital Wireless Speaker System XW-DV515 in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)Ellinika ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ∆ΗΛΩΝΕΙ ΟΤΙ Digital Wireless Speaker System XW-DV515 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/EK.Italiano Con la presente Pioneer dichiara che questo Digital Wireless Speaker System XW-DV515 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Español Por medio de la presente Pioneer declara que el Digital Wireless Speaker System XW-DV515 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Português Pioneer declara que este Digital Wireless Speaker System XW-DV515 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.EnglishWSS.book Page 5 Friday, March 7, 2003 5:57 PM
[For U.S. model]Changes or modifications not expressly approved by the manufacturer (party responsible) for Compliance could not void the user’s authority to operate the equipment.[For Canadian model]Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.[Pour le modèle Canadien]L'utilisation de l'appareil est soumise aux deux conditions suivantes: (1) il ne provoque pas de brouillage, et (2) il peut supporter tous les brouillages, y compris ceux qui sont en mesure de provoquer une anomalie de fonc-tionnement de l'appareil.[For Canadian model]To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.[Pour le modèle Canadien]Pour éviter le brouillage radioélectrique des émetteurs ayant une licence, cet appareil doit être utilisé à l'intérieur des habitations et loin des fenêtres de manière à assurer la protec-tion maximale. Un équipement (ou son antenne d'émission) lorsqu'il est installé à l'extérieur ne peut être utilisé qu'après obten-tion d'une licence.Power cord cautionHandle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cords. The power cord should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.Radio wave reflectionsThe radio waves received by the receiver include the wave coming directly from the transmitter (direct wave) and waves coming from various directions due to reflections by walls, furniture and building (reflected waves). The reflected waves due to obstacles and reflecting objects further produce a variety of reflected waves as well as variation in reception condition depending on locations. If the audio cannot be received properly due to this phenomenon, try moving the location of the wireless speaker a little. Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between the transmitter and wireless speaker.We do not assume any liability for the damages incurred due to improper use of the product by the user or third party, malfunction during use, other troubles or use of the product, unless indemnity for damages is admitted by the law.WSS.book Page 6 Friday, March 7, 2003 5:57 PM
For safety in operationDo not use the system in the proximity of electronic equipment that requires high-accuracy control or handling of very low-level signals.• The system may affect the electronic equipment, causing malfunction or accident. Examples of such electronic equipment: Hearing aid, cardiac pacemaker, other electrical medical equipment, fire alarm, automatic door, and other automated control equipment. If you use a pacemaker or other electrical medical equipment, consult the manufacturer or dealer to check the effects of radio waves on it.Do not use the system in places where its use is prohibited, for example near aircraft equipment and in hospitals.• The system may affect electronic equipment or electrical medical equipment, causing an accident. Follow the instructions given by the aircraft company or medical institution.Contents01 Connecting UpRear panel . . . . . . . . . . . . . . . . . . . . . . . 8Rear panel connections . . . . . . . . . . . . . . 902 Controls and DisplaysTransmitter . . . . . . . . . . . . . . . . . . . . . . 10Wireless speaker . . . . . . . . . . . . . . . . . . 1003 Additional InformationTaking care of the unit . . . . . . . . . . . . . . 13Troubleshooting. . . . . . . . . . . . . . . . . . . 15Specifications . . . . . . . . . . . . . . . . . . . . 16What’s in the boxPlease confirm that the following accessories are in the box when you open it.•Transmitter• Wireless speaker•AC adapter• RCA stereo cord• These operating instructions• Warranty cardEnglishWSS.book Page 7 Friday, March 7, 2003 5:57 PM
Connecting Up018EnChapter 1Connecting UpRear panel1 WIRELESS IN L/R jacks2 AC power cable3 DC IN inlet31RWIRELESSINLTransmitter2Wireless speakerWSS.book Page 8 Friday, March 7, 2003 5:57 PM
Connecting Up 019EnEnglishRear panel connections• When connecting, make sure that all components are switched off and unplugged.1 WIRELESS IN L/R jacksConnect the WIRELESS IN L/R jacks to the WIRELESS OUT L/R jacks on your XV-DV515 or XV-HTD630, using the supplied RCA stereo cord. Refer to the supplied operating instruc-tions for details.2 AC power cablePlug the AC power cable into a power outlet.3 DC IN inletConnect the supplied AC adapter to the DC IN inlet on the rear panel of the unit, then plug into a power outlet.RWIRELESSINLTo XV-DV515 or XV-HTD630To power outletWSS.book Page 9 Friday, March 7, 2003 5:57 PM
Controls and Displays0210EnChapter 2Controls and DisplaysTransmitterWireless speakerCHANNEL123421 3WIRELESSMODECHANNELSTEREO MODEVOLUMEPOWEROFFONMIN MAXAUTO ON/OFFSTEREOSURROUNDTUNEDAUTO54 67 9810CHANNEL1 2 3 4AUTO MANUALXW-DV-515XW-HTD630VOLUMEMIN MAXWSS.book Page 10 Friday, March 7, 2003 5:57 PM
Controls and Displays 0211EnEnglish1 CHANNEL INDICATORSLight to indicate the selected channel.2 CHANNELThe default setting is CH1. In case of poor reception due to interference from other electrical devices, you can improve reception by selecting another channel. Each time you press the button, the channel changes sequentially:Each of the 4 channels is allocated a frequency as follows:•CHANNEL 1 - 2.414GHz•CHANNEL 2 - 2.432GHz•CHANNEL 3 - 2.450GHz•CHANNEL 4 - 2.468GHz• Poor reception may cause the audio to be interrupted or stopped. This is not malfunction. Try changing the location or orientation of the transmitter and/or the wireless speaker to improve reception.3 AntennaTransmits signals to the wireless speaker.4POWERPress to switch the unit on or off.5TUNEDLights when the signal from the transmitter is properly received.6 WIRELESS MODESlide to select either SURROUND or STEREO mode.SURROUND - Sounds going to the surround left and right channels are heard through the wireless speakers.STEREO - Any source playing through the main system is heard in stereo through the wireless speakers (multi-channel sources will be downmixed to stereo).• Before switching to either mode, stop the DVD receiver.• If the DVD receiver and wireless speaker modes do not match, the wireless speaker system may produce loud sound.• When set to SURROUND, the STEREO MODE VOLUME control does not function.7 CHANNEL button• XW-DV515The default setting is AUTO ON. Press and hold for more than 5 seconds to switch between AUTO ON and AUTO OFF.The reception channel is temporarily locked when set to AUTO OFF. Switching to AUTO OFF may improve reception in some cases. When the POWER is turned off, the CHANNEL setting reverts to AUTO ON. Normally, use the AUTO ON setting.• When AUTO ON is selected, the same channel as the transmitter is selected automatically.CH 2 CH 3 CH 4CH 1WSS.book Page 11 Friday, March 7, 2003 5:57 PM
Controls and Displays0212En• XW-HTD630The default setting is AUTO. Press and hold for more than 5 seconds to switch between AUTO and MANUAL.The reception channel is temporarily locked when set to MANUAL. Switching to MANUAL may improve reception in some cases. The CHANNEL changes as follows each time you press the CHANNEL (AUTO/MANUAL) button:Press CHANNEL (AUTO/MANUAL) repeatedly until the same channel as the transmitter is selected.When the POWER is turned off, the CHANNEL setting reverts to AUTO. Normally, use the AUTO setting.•When AUTO is selected, the same channel as the transmitter is selected automatically.•When MANUAL is selected, be sure to select the same channel as the transmitter. If a different channel is selected, the signal can not be received.8AUTOLights when AUTO (AUTO ON) mode is selected.9 VOLUME (STEREO MODE VOLUME)Turn to adjust the speaker volume when WIRELESS MODE is set to STEREO.• When set to SURROUND, the volume control does not operate. The volume changes automatically.10 AntennaReceives signals from the transmitter.• The wireless speaker can be used at distances of up to 10m from the transmitter. This range may change depending on the environment.• Please refer to the provided manual before using XV-DV515 or XV-HTD630.CH 2 CH 3 CH 4CH 1WSS.book Page 12 Friday, March 7, 2003 5:57 PM
Additional Information 0313EnEnglishChapter 3Additional InformationTaking care of the unitCleaning the unit’s exterior• Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.• Do not use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other chemicals on or near this unit since they will corrode the surfaces.• If you use a chemical-impregnated cleaning cloth, read the instructions carefully before use. These cloths may leave smear marks on half-mirror finish surfaces; if this happens, finish with a dry cloth.• Unplug the unit when cleaning.Problems with condensationCondensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.Hints on installationWe want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:Do...• Use in a well-ventilated room.• Place on a solid, flat, level surface, such as a table, shelf or stereo rack.• Be sure to switch the wireless speaker off when not in use.Don’t...• Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.• Place on a window sill or other place where the unit will be exposed to direct sunlight.• Use in an excessively dusty or damp environment.• Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.• Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.• Use in a kitchen or other room where the unit may be exposed to smoke or steam.• Use on a thick rug or carpet, or cover with cloth—this may prevent proper cooling of the unit.• Place on an unstable surface, or one that is not large enough to support all four of the unit’s feet.Moving the wireless speakerIf you need to move the wireless speaker, first press POWER on the front panel to turn the unit off. Unplug the power cord. AC adapter and power cord caution• Do not leave the power cord near heating equipment. The coating of the cord may melt, which could lead to fire and/or electrocution.• Make sure to grasp the body of the AC adapter when removing it from the power outlet. If you pull the power cord, it may become damaged which could lead to fire and/or electrocution.• Do not attempt to plug in or remove the AC adapter with wet hands. This may result in electrocution.WSS.book Page 13 Friday, March 7, 2003 5:57 PM
Additional Information0314En• Insert the prongs of the AC adapter all the way into the power outlet. If the connection is incomplete, heat may be generated which could lead to fire. Furthermore, contact with the connected prongs of the adapter may result in electrocution.• Do not insert the AC adapter into a power outlet where the connection remains loose despite inserting the prongs all the way into the outlet. Heat may be generated which could lead to fire. Consult with the retailer or an electrician regarding replacement of the power outlet.Radio wave cautionTo prevent noise or interrupted communication, do not use this system in the following locations:• Locations exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven. (The radio wave may not reach in certain environments.)• Locations near a radio. (This may cause noise interference.)• If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from the antenna input terminal of the A/V equipment.Scope of operationUse of this equipment is limited to home use. (Transmission distances may be reduced depending on communication environments.)In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped:• In reinforced concrete buildings or homes made of metallic structural members.• Near large metallic furniture.• In a crowd of people or near a building or obstacle.• In a location exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven.• If you live in a heavily populated residential area (apartment, townhouse, etc.) and if your neighbor’s microwave is placed near your system, you may experience radio wave interference or no sound from the speaker. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference.WSS.book Page 14 Friday, March 7, 2003 5:57 PM
Additional Information 0315EnEnglishTroubleshootingIncorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.Symptom Cause & RemedyAudio is interrupted. • This system uses high frequency radio waves that have properties similar to light, such as linearity, reflection, refraction, diffraction, and interference. Therefore, placement of the system can result in weak radio waves and/or interruption.• The distance between the transmitter and wireless speaker may be too large. Use the wireless speaker within the reach of radio wave from the transmitter.• Is the system being used in a location with favorable condition for electrical noise generation?Audio is suddenly interrupted. • There may be radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven, operating nearby.Audio cannot be received. • The radio wave reception is variable depending on locations due to the effects of obstacles and reflecting objects. Try changing the location of the receiver a little.• The transmitter and receiver are designed and sold as a pair, and they identify each other in communication. This means that communication is not available between separately purchased transmitter and receiver.Horizontal stripe noise interference on a TV set near the transmitter. • Is there a piece of A/V equipment with an antenna near the transmitter? If so, move the transmitter away from the antenna input terminal of the AV equipment.Power shuts off when the switch is on or the system is in operation. • The system is malfunctioning. Please contact the nearest PIONEER authorized service center.CautionStatic electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then re-plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest PIONEER service center.WSS.book Page 15 Friday, March 7, 2003 5:57 PM
Additional Information0316EnSpecificationsGeneralDigital Wireless Speaker System(Transmitter/Wireless speaker)TransmitterAC adapterPower requirements. . AC 220-240V, 50/60Hz (European model)AC 230V, 50/60Hz (U.K. model)AC 120V, 60Hz (US model)Power consumption. . . . . . . . . . . . . 9W (European, U.K. model)8W (US model)Rated output. . . . . . . . . . . . . . . .12V/300mAPower consumption (without AC adapter). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2WInput. . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jackWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3kgDimensions. . . . . 166(W) x 56(H) x 112(D)mmWireless SpeakerPower requirements. . . . AC 220-230V, 50/60Hz (European model)AC 230V, 50/60Hz (U.K. model)AC 120V, 60Hz (US model)Power consumption. . . . . . . . . . . . . . 52W (European, U.K. model)57W (US model)Amplifier characteristicsMaximum power output . . . . . . . . . 25W/chRMS (1kHz, THD10%, 4Ω)Speaker unit . . . . . . . . . . . . 7cm cone type x 2Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2kgDimensions. . . . 420(W) x 178(H) x 138(D)mmAccessoriesTransmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Wireless speaker . . . . . . . . . . . . . . . . . . . . . . . 1AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1RCA stereo cord. . . . . . . . . . . . . . . . . . . . . . . . 1These operating Instructions . . . . . . . . . . . . . 1Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . 1• The specifications and design of this product are subject to change without notice, due to improvement.Published by Pioneer Corporation.Copyright © 2003 Pioneer Corporation.All rights reserved.WSS.book Page 16 Friday, March 7, 2003 5:57 PM
WSS.book Page 17 Friday, March 7, 2003 5:57 PM
PIONEER CORPORATION4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC.P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404PIONEER ELECTRONICS OF CANADA, INC.300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411PIONEER EUROPE NVHaven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11PIONEER ELECTRONICS ASIACENTRE PTE. LTD.253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111PIONEER ELECTRONICS AUSTRALIA PTY. LTD.178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270K002E<TEWWW/03C00001> Printed in / Imprimé au <ARC7475-A>FR_DV515.book Page 16 Friday, March 7, 2003 10:58 PM

Navigation menu