Pioneer T101 Digital Wireless Speaker Transmitter User Manual WSS
Pioneer Corporation Digital Wireless Speaker Transmitter WSS
Pioneer >
Manual
Operating Instructions
Mode d’emploi
Digital Wireless Speaker System
Ensemble d
’
enceintes sans
fil pour transmission numérique
XW-DV515
Digital Wireless
Rear Speaker System
Ensemble d
’
enceintes arrière sans
fil pour transmission numérique
XW-HTD630
WSS.book Page 1 Friday, March 7, 2003 5:57 PM
READ INSTRUCTIONS — All the safety and
operating instructions should be read before
the product is operated.
RETAIN INSTRUCTIONS — The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS — All warnings on the
product and in the operating instructions should
be adhered to.
FOLLOW INSTRUCTIONS — All operating and
use instructions should be followed.
CLEANING — Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzine,
insecticides or other volatile liquids since they
may corrode the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE — Do not use this
product near water — for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES — Do not place this product on
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
CART — A product and cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause the
product and cart combination to
overturn.
VENTILATION — Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to
protect it from overheating, and these openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
POWER SOURCES — This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
LOCATION – The appliance should be installed
in a stable location.
NONUSE PERIODS – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
GROUNDING OR POLARIZATION
• If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
• If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding type plug.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product's enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
IMPORTANT
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
H002_En
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WSS.book Page 2 Friday, March 7, 2003 5:57 PM
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
[For U.S. model]
IMPORTANT NOTICE
The serial number for this equipment is located
on the rear case. Please write this serial
number on your enclosed warranty card and
keep it in a secure area. This is for your
security.
H006A_En
to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have fallen
into the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
• If the product has been dropped or damaged in
any way.
• When the product exhibits a distinct change in
performance — this indicates a need for
service.
REPLACEMENT PARTS — When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
SAFETY CHECK — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
HEAT — The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
WARNING:
THIS APPARATUS IS NOT
WATERPROOF. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE AND DO NOT PUT ANY
WATER SOURCE NEAR THIS APPARATUS, SUCH
AS VASES, FLOWER POTS, COSMETICS
CONTAINERS, MEDICINE BOTTLES, ETC.
WARNING:
Handling the cord on this product or cords
associated with accessories sold with the
product will expose you to lead, a chemical
known to the State of California and other
governmental entities to cause cancer and
birth defects or other reproductive harm.
Wash hands after handling
English
WSS.book Page 3 Friday, March 7, 2003 5:57 PM
[For Canadian model]
This Class B digital apparatus complies with
Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
H009_2L
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help. H010_En
CAUTION:
This product satisfies FCC regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To
prevent electromagnetic interference with
electric appliances such as radios and
televisions, use shielded cables and connec-
tors for connections. H012_En
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user's right to operate the equipment. H011_En
[For Canadian model]
CAUTION: TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR UNE
PRISE DE COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT. H007A_2L
WARNING:
BEFORE PLUGGING IN THE UNIT
FOR THE FIRST TIME, READ THE FOLLOWING
SECTION CAREFULLY. THE VOLTAGE OF THE
AVAILABLE POWER SUPPLY DIFFERS
ACCORDING TO COUNTRY OR REGION. BE SURE
THAT THE POWER SUPPLY VOLTAGE OF THE
AREA WHERE THIS UNIT WILL BE USED MEETS
THE REQUIRED VOLTAGE (E.G., 230V OR 120V)
WRITTEN ON THE REAR PANEL.
H041A_En
Operating Environment H045_En
Operating environment temperature and
humidity:
+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
÷Location exposed to direct sunlight or strong
÷artificial light
÷Location exposed to high humidity, or poorly
ventilated location
WARNING: NO NAKED FLAME SOURCES,
SUCH AS LIGHTED CANDLE, SHOULD BE
PLACED ON THE APPARATUS. IF NAKED FLAME
SOURCES ACCIDENTALLY FALL DOWN, FIRE
SPREAD OVER THE APPARATUS THEN MAY
CAUSE FIRE. H044_En
VENTILATION:
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 10 cm at
top, 10 cm at rear, and 10 cm at each side).
WARNING: Slot and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, to
prevent fire hazard, the openings should
never be blocked and covered with items,
such as newspapers, table-cloths, curtains,
etc. Also do not put the apparatus on the
thick carpet, bed, sofa, or fabric having a
thick pile. H040 En
WSS.book Page 4 Friday, March 7, 2003 5:57 PM
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer: Pioneer Corporation
4-1, 1-chome, Meguro, Meguro-ku
153-8654 TOKYO, JAPAN
EU Representative’s: Pioneer Europe NV
Haven 1087, Keetberglaan 1,
9120 MELSELE, BELGIUM
English Hereby, Pioneer, declares that this Digital Wireless Speaker System XW-DV515 is in
compliance with the essential requirements and other relevant provisions of Directive 1999/
5/EC.
Suomi Pioneer vakuuttaa täten että Digital Wireless Speaker System XW-DV515 tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Nederlands Hierbij verklaart Pioneer dat het toestel Digital Wireless Speaker System XW-DV515 in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn
1999/5/EG.
Français Par la présente Pioneer déclare que l'appareil Digital Wireless Speaker System XW-DV515
est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Svenska Härmed intygar Pioneer att denna Digital Wireless Speaker System XW-DV515 står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Dansk Undertegnede Pioneer erklærer herved, at følgende udstyr Digital Wireless Speaker System
XW-DV515 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklärt Pioneer, dass sich dieses Digital Wireless Speaker System XW-DV515
in Übereinstimmung mit den grundlegenden Anforderungen und den anderen
relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)
Ellinika ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ∆ΗΛΩΝΕΙ ΟΤΙ Digital Wireless Speaker System
XW-DV515 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ
ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/EK.
Italiano Con la presente Pioneer dichiara che questo Digital Wireless Speaker System XW-DV515 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Español Por medio de la presente Pioneer declara que el Digital Wireless Speaker System XW-
DV515 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o
exigibles de la Directiva 1999/5/CE.
Português Pioneer declara que este Digital Wireless Speaker System XW-DV515 está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE.
English
WSS.book Page 5 Friday, March 7, 2003 5:57 PM
[For U.S. model]
Changes or modifications not expressly
approved by the manufacturer (party
responsible) for Compliance could not void
the user’s authority to operate the equipment.
[For Canadian model]
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
[Pour le mod
èle Canadien
]
L'utilisation de l'appareil est soumise aux deux
conditions suivantes: (1) il ne provoque pas de
brouillage, et (2) il peut supporter tous les
brouillages, y compris ceux qui sont en
mesure de provoquer une anomalie de fonc-
tionnement de l'appareil.
[For Canadian model]
To prevent radio interference to the licensed
service, this device is intended to be operated
indoors and away from windows to provide
maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is
subject to licensing.
[Pour le mod
èle Canadien
]
Pour éviter le brouillage radioélectrique des
émetteurs ayant une licence, cet appareil doit
être utilisé à l'intérieur des habitations et loin
des fenêtres de manière à assurer la protec-
tion maximale. Un équipement (ou son
antenne d'émission) lorsqu'il est installé à
l'extérieur ne peut être utilisé qu'après obten-
tion d'une licence.
Power cord caution
Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord, and
never touch the power cord when your hands
are wet, as this could cause a short circuit or
electric shock. Do not place the unit, a piece
of furniture, or other object on the power cord
or pinch the cord in any other way. Never
make a knot in the cord or tie it with other
cords. The power cord should be routed so
that they are not likely to be stepped on. A
damaged power cord can cause a fire or give
you an electric shock. Check the power cord
once in a while. If you find it damaged, ask
your nearest Pioneer authorized service
center or your dealer for a replacement.
Radio wave reflections
The radio waves received by the receiver
include the wave coming directly from the
transmitter (direct wave) and waves coming
from various directions due to reflections by
walls, furniture and building (reflected
waves). The reflected waves due to obstacles
and reflecting objects further produce a
variety of reflected waves as well as variation
in reception condition depending on
locations. If the audio cannot be received
properly due to this phenomenon, try moving
the location of the wireless speaker a little.
Also note that audio may be interrupted due
to the reflected waves when a person crosses
or approaches the space between the
transmitter and wireless speaker.
We do not assume any liability for the
damages incurred due to improper use of the
product by the user or third party, malfunction
during use, other troubles or use of the
product, unless indemnity for damages is
admitted by the law.
WSS.book Page 6 Friday, March 7, 2003 5:57 PM
For safety in operation
Do not use the system in the proximity of
electronic equipment that requires high-
accuracy control or handling of very low-level
signals.
• The system may affect the electronic
equipment, causing malfunction or
accident. Examples of such electronic
equipment:
Hearing aid, cardiac pacemaker, other
electrical medical equipment, fire alarm,
automatic door, and other automated
control equipment.
If you use a pacemaker or other electrical
medical equipment, consult the
manufacturer or dealer to check the
effects of radio waves on it.
Do not use the system in places where its use
is prohibited, for example near aircraft
equipment and in hospitals.
• The system may affect electronic
equipment or electrical medical
equipment, causing an accident. Follow
the instructions given by the aircraft
company or medical institution.
Contents
01 Connecting Up
Rear panel . . . . . . . . . . . . . . . . . . . . . . . 8
Rear panel connections . . . . . . . . . . . . . . 9
02 Controls and Displays
Transmitter . . . . . . . . . . . . . . . . . . . . . . 10
Wireless speaker . . . . . . . . . . . . . . . . . . 10
03 Additional Information
Taking care of the unit . . . . . . . . . . . . . . 13
Troubleshooting. . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . 16
What’s in the box
Please confirm that the following accessories
are in the box when you open it.
•Transmitter
• Wireless speaker
•AC adapter
• RCA stereo cord
• These operating instructions
• Warranty card
English
WSS.book Page 7 Friday, March 7, 2003 5:57 PM
Connecting Up01
8
En
Chapter 1
Connecting Up
Rear panel
1 WIRELESS IN L/R jacks
2 AC power cable
3 DC IN inlet
31
R
WIRELESS
IN
L
Transmitter
2
Wireless speaker
WSS.book Page 8 Friday, March 7, 2003 5:57 PM
Connecting Up 01
9
En
English
Rear panel connections
• When connecting, make sure that all components are switched off and unplugged.
1 WIRELESS IN L/R jacks
Connect the WIRELESS IN L/R jacks to the
WIRELESS OUT L/R jacks on your XV-DV515
or XV-HTD630, using the supplied RCA stereo
cord. Refer to the supplied operating instruc-
tions for details.
2 AC power cable
Plug the AC power cable into a power outlet.
3 DC IN inlet
Connect the supplied AC adapter to the DC
IN inlet on the rear panel of the unit, then
plug into a power outlet.
R
WIRELESS
IN
L
To XV-DV515 or XV-HTD630
To power outlet
WSS.book Page 9 Friday, March 7, 2003 5:57 PM
Controls and Displays02
10
En
Chapter 2
Controls and Displays
Transmitter
Wireless speaker
CHANNEL
1234
21 3
WIRELESS
MODE
CHANNEL
STEREO MODE
VOLUME
POWER
OFF
ON
MIN MAX
AUTO ON/OFF
STEREO
SURROUND
TUNED
AUTO
5
4 6
7 9
8
10
CHANNEL
1 2 3 4
AUTO MANUAL
XW-DV-515
XW-HTD630
VOLUME
MIN MAX
WSS.book Page 10 Friday, March 7, 2003 5:57 PM
Controls and Displays 02
11
En
English
1 CHANNEL INDICATORS
Light to indicate the selected channel.
2 CHANNEL
The default setting is CH1. In case of poor
reception due to interference from other
electrical devices, you can improve reception
by selecting another channel. Each time you
press the button, the channel changes
sequentially:
Each of the 4 channels is allocated a
frequency as follows:
•CHANNEL 1 - 2.414GHz
•CHANNEL 2 - 2.432GHz
•CHANNEL 3 - 2.450GHz
•CHANNEL 4 - 2.468GHz
• Poor reception may cause the audio to be
interrupted or stopped. This is not
malfunction. Try changing the location or
orientation of the transmitter and/or the
wireless speaker to improve reception.
3 Antenna
Transmits signals to the wireless speaker.
4POWER
Press to switch the unit on or off.
5TUNED
Lights when the signal from the transmitter is
properly received.
6 WIRELESS MODE
Slide to select either SURROUND or STEREO
mode.
SURROUND - Sounds going to the surround
left and right channels are heard through the
wireless speakers.
STEREO - Any source playing through the
main system is heard in stereo through the
wireless speakers (multi-channel sources will
be downmixed to stereo).
• Before switching to either mode, stop the
DVD receiver.
• If the DVD receiver and wireless speaker
modes do not match, the wireless
speaker system may produce loud sound.
• When set to SURROUND, the STEREO
MODE VOLUME control does not
function.
7 CHANNEL button
• XW-DV515
The default setting is AUTO ON. Press and
hold for more than 5 seconds to switch
between AUTO ON and AUTO OFF.
The reception channel is temporarily locked
when set to AUTO OFF. Switching to AUTO
OFF may improve reception in some cases.
When the POWER is turned off, the
CHANNEL setting reverts to AUTO ON.
Normally, use the AUTO ON setting.
• When AUTO ON is selected, the same
channel as the transmitter is selected
automatically.
CH 2 CH 3 CH 4
CH 1
WSS.book Page 11 Friday, March 7, 2003 5:57 PM
Controls and Displays02
12
En
• XW-HTD630
The default setting is AUTO. Press and hold
for more than 5 seconds to switch between
AUTO and MANUAL.
The reception channel is temporarily locked
when set to MANUAL. Switching to
MANUAL may improve reception in some
cases. The CHANNEL changes as follows
each time you press the CHANNEL (AUTO/
MANUAL) button:
Press CHANNEL (AUTO/MANUAL)
repeatedly until the same channel as the
transmitter is selected.
When the POWER is turned off, the
CHANNEL setting reverts to AUTO. Normally,
use the AUTO setting.
•When AUTO is selected, the same
channel as the transmitter is selected
automatically.
•When MANUAL is selected, be sure to
select the same channel as the
transmitter. If a different channel is
selected, the signal can not be received.
8AUTO
Lights when AUTO (AUTO ON) mode is
selected.
9 VOLUME (STEREO MODE VOLUME)
Turn to adjust the speaker volume when
WIRELESS MODE is set to STEREO.
• When set to SURROUND, the volume
control does not operate. The volume
changes automatically.
10 Antenna
Receives signals from the transmitter.
• The wireless speaker can be used at
distances of up to 10m from the
transmitter. This range may change
depending on the environment.
• Please refer to the provided manual
before using XV-DV515 or XV-HTD630.
CH 2 CH 3 CH 4
CH 1
WSS.book Page 12 Friday, March 7, 2003 5:57 PM
Additional Information 03
13
En
English
Chapter 3
Additional Information
Taking care of the unit
Cleaning the unit’s exterior
• Use a polishing cloth or dry cloth to wipe
off dust and dirt. If the surfaces are very
dirty, wipe with a soft cloth dipped in
some neutral cleanser diluted five or six
times with water and wrung out well,
then wipe again with a dry cloth.
• Do not use furniture wax or cleaners.
Never use thinners, benzine or
insecticide sprays or other chemicals on
or near this unit since they will corrode
the surfaces.
• If you use a chemical-impregnated
cleaning cloth, read the instructions
carefully before use. These cloths may
leave smear marks on half-mirror finish
surfaces; if this happens, finish with a dry
cloth.
• Unplug the unit when cleaning.
Problems with condensation
Condensation may form inside the unit if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
unit, it may temporarily impair its
performance. For this reason you should
leave it to adjust to the warmer temperature
for about an hour before switching on and
using.
Hints on installation
We want you to enjoy using this unit for years
to come, so please bear in mind the following
points when choosing a suitable location for
it:
Do...
• Use in a well-ventilated room.
• Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
• Be sure to switch the wireless speaker off
when not in use.
Don’t...
• Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
• Place on a window sill or other place
where the unit will be exposed to direct
sunlight.
• Use in an excessively dusty or damp
environment.
• Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
• Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
• Use in a kitchen or other room where the
unit may be exposed to smoke or steam.
• Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the unit.
• Place on an unstable surface, or one that
is not large enough to support all four of
the unit’s feet.
Moving the wireless speaker
If you need to move the wireless speaker, first
press POWER on the front panel to turn the
unit off. Unplug the power cord.
AC adapter and power cord caution
• Do not leave the power cord near heating
equipment. The coating of the cord may
melt, which could lead to fire and/or
electrocution.
• Make sure to grasp the body of the AC
adapter when removing it from the power
outlet. If you pull the power cord, it may
become damaged which could lead to
fire and/or electrocution.
• Do not attempt to plug in or remove the
AC adapter with wet hands. This may
result in electrocution.
WSS.book Page 13 Friday, March 7, 2003 5:57 PM
Additional Information03
14
En
• Insert the prongs of the AC adapter all
the way into the power outlet. If the
connection is incomplete, heat may be
generated which could lead to fire.
Furthermore, contact with the connected
prongs of the adapter may result in
electrocution.
• Do not insert the AC adapter into a power
outlet where the connection remains
loose despite inserting the prongs all the
way into the outlet. Heat may be
generated which could lead to fire.
Consult with the retailer or an electrician
regarding replacement of the power
outlet.
Radio wave caution
To prevent noise or interrupted
communication, do not use this system in the
following locations:
• Locations exposed to the magnetic field,
static electricity or radio wave
interference from radio communication
equipment using the same frequency
band (2.4 GHz) as this system, such as a
Bluetooth device, radio LAN device or
microwave oven. (The radio wave may not
reach in certain environments.)
• Locations near a radio. (This may cause
noise interference.)
• If the transmitter is used near A/V
equipment with an antenna input
terminal, such as a TV, VCR, BS tuner or
CS tuner, you may experience noise
interference on a TV near the transmitter.
In such cases, place the transmitter at a
larger distance from the antenna input
terminal of the A/V equipment.
Scope of operation
Use of this equipment is limited to home use.
(Transmission distances may be reduced
depending on communication
environments.)
In the following locations, poor condition or
inability to receive radio waves may cause the
audio to be interrupted or stopped:
• In reinforced concrete buildings or
homes made of metallic structural
members.
• Near large metallic furniture.
• In a crowd of people or near a building or
obstacle.
• In a location exposed to the magnetic
field, static electricity or radio wave
interference from radio communication
equipment using the same frequency
band (2.4 GHz) as this system, such as a
Bluetooth device, radio LAN device or
microwave oven.
• If you live in a heavily populated
residential area (apartment, townhouse,
etc.) and if your neighbor’s microwave is
placed near your system, you may
experience radio wave interference or no
sound from the speaker. If this occurs,
move your unit to a different place. When
the microwave is not in use, there will be
no radio wave interference.
WSS.book Page 14 Friday, March 7, 2003 5:57 PM
Additional Information 03
15
En
English
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. If the trouble cannot be rectified
even after exercising the checks listed below, ask your nearest PIONEER authorized service
center or your dealer to carry out repair work.
Symptom Cause & Remedy
Audio is interrupted. • This system uses high frequency radio waves that
have properties similar to light, such as linearity,
reflection, refraction, diffraction, and interference.
Therefore, placement of the system can result in
weak radio waves and/or interruption.
• The distance between the transmitter and wireless
speaker may be too large. Use the wireless
speaker within the reach of radio wave from the
transmitter.
• Is the system being used in a location with favorable
condition for electrical noise generation?
Audio is suddenly interrupted. • There may be radio communication equipment
using the same frequency band (2.4 GHz) as this
system, such as a Bluetooth device, radio LAN
device or microwave oven, operating nearby.
Audio cannot be received. • The radio wave reception is variable depending on
locations due to the effects of obstacles and
reflecting objects. Try changing the location of the
receiver a little.
• The transmitter and receiver are designed and sold
as a pair, and they identify each other in
communication. This means that communication is
not available between separately purchased
transmitter and receiver.
Horizontal stripe noise interference on
a TV set near the transmitter. • Is there a piece of A/V equipment with an antenna
near the transmitter? If so, move the transmitter
away from the antenna input terminal of the AV
equipment.
Power shuts off when the switch is on
or the system is in operation. • The system is malfunctioning. Please contact the
nearest PIONEER authorized service center.
Caution
Static electricity or other external influence may cause malfunctioning of this unit. In this
case, unplugging the power cord and then re-plugging it in will usually reset the unit for
proper operation. If this does not correct the problem, please consult your nearest PIONEER
service center.
WSS.book Page 15 Friday, March 7, 2003 5:57 PM
Additional Information03
16
En
Specifications
General
Digital Wireless Speaker System
(Transmitter/Wireless speaker)
Transmitter
AC adapter
Power requirements
. . AC 220-240V, 50/60Hz (European model)
AC 230V, 50/60Hz (U.K. model)
AC 120V, 60Hz (US model)
Power consumption
. . . . . . . . . . . . . 9W (European, U.K. model)
8W (US model)
Rated output. . . . . . . . . . . . . . . .12V/300mA
Power consumption (without AC adapter)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2W
Input. . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3kg
Dimensions. . . . . 166(W) x 56(H) x 112(D)mm
Wireless Speaker
Power requirements
. . . . AC 220-230V, 50/60Hz (European model)
AC 230V, 50/60Hz (U.K. model)
AC 120V, 60Hz (US model)
Power consumption
. . . . . . . . . . . . . . 52W (European, U.K. model)
57W (US model)
Amplifier characteristics
Maximum power output . . . . . . . . . 25W/ch
RMS (1kHz, THD10%, 4Ω)
Speaker unit . . . . . . . . . . . . 7cm cone type x 2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2kg
Dimensions. . . . 420(W) x 178(H) x 138(D)mm
Accessories
Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wireless speaker . . . . . . . . . . . . . . . . . . . . . . . 1
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
RCA stereo cord. . . . . . . . . . . . . . . . . . . . . . . . 1
These operating Instructions . . . . . . . . . . . . . 1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . 1
• The specifications and design of this
product are subject to change without
notice, due to improvement.
Published by Pioneer Corporation.
Copyright © 2003 Pioneer Corporation.
All rights reserved.
WSS.book Page 16 Friday, March 7, 2003 5:57 PM
WSS.book Page 17 Friday, March 7, 2003 5:57 PM
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K
002
E
<TEWWW/03C00001> Printed in / Imprimé au <ARC7475-A>
FR_DV515.book Page 16 Friday, March 7, 2003 10:58 PM