Pioneer T106 Bluetooth Adapter User Manual AS BT200

Download:
Mirror Download [FCC.gov]
Document ID	1422463
Application ID	PnCpun6hBoz/fkAbEAFE6g==
Document Description	User Manual(AS-BT200)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.34kB (641714 bits)
Date Submitted	2011-02-27 00:00:00
Date Available	2011-02-28 00:00:00
Creation Date	2011-02-09 10:36:18
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-02-23 16:41:42
Document Title	AS-BT200.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	0130674

AS-BT200.book
1 ページ
２０１０年１２月１７日
AS-BT200
金曜日
午前１１時２６分
BLUETOOTH® ADAPTER
ADAPTATEUR BLUETOOTH®
BLUETOOTH® ADAPTER
ADATTATORE BLUETOOTH®
BLUETOOTH® ADAPTER
ADAPTADOR BLUETOOTH®
АДАПТЕР BLUETOOTH®
Operating instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Handleiding
Manual de instrucciones
Инструкции по эксплуатации
AS-BT200.book
2 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
D3-4-2-1-1_A1_En
This product is for general household purposes. Any failure due to use for other than
household purposes (such as long-term use for business purposes in a restaurant or
use in a car or ship) and which requires repair will be charged for even during the
warranty period.
K041_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any
container filled with liquid near this equipment (such as a vase or flower pot) or expose it
to dripping, splashing, rain or moisture.
D3-4-2-1-3_A1_En
[European model only]
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
K058b_A1_En
En
AS-BT200.book
3 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
[U.S. model only]
D8-10-2_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
English
Information to User
Alterations or modifications carried out without appropriate authorization may
invalidate the user’s right to operate the equipment.
D8-10-1-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used
to connect the unit to other equipment. To prevent electromagnetic interference with
electric appliances such as radios and televisions, use shielded cables and
connectors for connections.
D8-10-3a_A1_En
[Canadian model only]
This Class B digital apparatus complies with Canadian ICES-003.
D8-10-1-3_A1_En
En
AS-BT200.book
4 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your
model properly. After you have finished reading the instructions, put them away in a safe
place for future reference.
Register your product at
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
Protect your new investment
The details of your purchase will be on file for reference in the event of an insurance
claim such as loss or theft.
Receive free tips, updates and service bulletins on your
new product
Improve product development
Your input helps us continue to design products that meet your needs.
Receive a free Pioneer newsletter
Registered customers can opt in to receive a monthly newsletter.
Discover the benefits of registering your product online at
http://www.pioneer.co.uk (or http://www.pioneer.eu).
En
AS-BT200.book
5 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
Radio wave caution
• Cordless facsimiles
• If there is something obstructing the
path between this unit (including
devices supported by this unit) and the
device equipped with Bluetooth wireless
technology (such as a metal door,
concrete wall, or insulation containing
tinfoil), you may need to change the
location of your system to prevent signal
noise and interruptions.
English
This unit uses a 2.4 GHz radio wave
frequency, which is a band used by other
wireless systems (see list below). To prevent
noise or interrupted communication, do not
use this unit nearby such devices, or make
sure these devices are switched off during
use.
• Cordless phones
• Microwave ovens
• Wireless LAN devices (IEEE802.11b/g)
Scope of operation
• Wireless AV equipment
Use of this unit is limited to home use.
(Transmission distances may be reduced
depending on communication
environment).
In the following locations, poor condition or
inability to receive radio waves may cause
the audio to be interrupted or stopped:
• In reinforced concrete buildings or
steelframed or iron-framed buildings.
• Wireless controllers for game systems
• Microwave-based health aids
• Some baby monitors
Other, less common, equipment that may
operate on the same frequency:
• Anti-theft systems
• Amateur radio stations (HAM)
• Warehouse logistic management
systems
• Discrimination systems for train or
emergency vehicles
Note
• In the event noise appears in your
television image, there is the possibility
that a Bluetooth® wireless technology
enabled device or this unit (including
products supported by this unit) are
causing signal interference with the
antenna input connector of your
television, video, BS tuner, CS tuner, etc.
In this event, increase the distance
between the antenna input connector
and the Bluetooth wireless technology
enabled device or this unit (including
products supported by this unit).
• Near large metallic furniture.
• In a crowd of people or near a building or
obstacle.
• In a location exposed to the magnetic
field, static electricity or radio wave
interference from radio communication
equipment using the same frequency
band (2.4 GHz) as this unit, such as a
2.4 GHz wireless LAN device
(IEEE802.11b/g) or microwave oven.
• If you live in a heavily populated
residential area (apartment, townhouse,
etc.) and if your neighbor’s microwave is
placed near your system, you may
experience radio wave interference. If
this occurs, move your unit to a different
place. When the microwave is not in use,
there will be no radio wave interference.
En
AS-BT200.book
6 ページ
２０１０年１２月１７日
Radio wave reflections
The radio waves received by this unit
include the radio wave coming directly from
the device equipped with Bluetooth wireless
technology (direct wave) and waves coming
from various directions due to reflections by
walls, furniture and building (reflected
waves). The reflected waves (due to
obstacles and reflecting objects) further
produce a variety of reflected waves as well
as variation in reception condition
depending on locations. If the audio cannot
be received properly due to this
phenomenon, try moving the location of the
device equipped with Bluetooth wireless
technology a little. Also note that audio may
be interrupted due to the reflected waves
when a person crosses or approaches the
space between this unit and the device
equipped with Bluetooth wireless
technology.
金曜日
午前１１時２６分
Precautions regarding
connections to products
supported by this unit
• Complete connections for all devices
supported by this unit, including all
audio cords and power cables before
connecting them to this unit.
• After completing connections to this
unit, check the audio and power cables
to confirm that they not twisted together.
• When disconnecting this unit, confirm
that you have sufficient working space in
the surrounding area.
• When changing connections of audio or
other cables for products supported by
this unit, confirm that you have sufficient
working space in the surrounding area.
CAUTION
• Always connect this unit to the
ADAPTER PORT of the product
supported by this unit. If connections are
made to a connector other than the
ADAPTER PORT of the supported
product, malfunctions or damage may
result to this unit or the supported
product.
• Please note that Pioneer is not
responsible for damages that result from
connecting this unit to a connector other
than the ADAPTER PORT of a supported
product.
En
AS-BT200.book
7 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
What can you do with this adapter?
Wireless music play
music wirelessly1. Also, by using a commercially available transmitter supporting
Bluetooth wireless technology, you can listen to music on a device not equipped with
Bluetooth wireless technology. This unit supports SCMS-T contents protection, so music
can also be enjoyed on devices equipped with SCMS-T type Bluetooth wireless technology.
English
When this unit is connected to a supported device, a product equipped with Bluetooth
wireless technology (portable cell phone, digital music player, etc.) can be used to listen to
Remote control operation
A remote supported by this unit allows you to perform play, stop and other operations.2
Bluetooth wireless
technology enabled device:
cell phone
Bluetooth wireless
technology enabled device:
Digital music player
Devices not equipped with
Bluetooth wireless technology:
Digital music player
Bluetooth® audio transmitter
(sold commercially)
Music data
BLUETOOTH ® ADAPTER
(This unit)
Device supported by
this adapter
Remote control operation
Note
1 It must be necessary that the Bluetooth wireless technology enabled device supports A2DP
profiles.
2 • It must be necessary that the Bluetooth wireless technology enabled device supports
AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology
enabled devices.
En
AS-BT200.book
8 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
To listen to music
CAUTION
• When performing connections, always turn off power to the supported device first.
• In the event this unit does not operate properly, turn off power to the supported device,
then check its connections to this unit. Also, consult the operating instructions for the
supported device.
Connect this unit to the ADAPTER PORT of the supported device.
Turn on power to the supported device.
Perform Bluetooth pairing.
Register this unit and the device connected by Bluetooth wireless technology.
Connect to a device equipped with Bluetooth wireless technology.
Begin playback of music on the device connected to this unit with Bluetooth wireless
technology.
For details regarding pairing and operation, consult the operating
instructions for the device supported by this unit.
Note
• This Bluetooth ADAPTER AS-BT200 is compatible with the earlier Bluetooth ADAPTER
AS-BT100, so it can be used with products supported by that unit. When reading
instruction manuals for products supported by the AS-BT100, merely read “AS-BT200”
in place of AS-BT100.
• This unit complies with Bluetooth Specifications Ver. 2.1. When this unit and another
device equipped with Bluetooth wireless technology both comply with Bluetooth
Specification Ver. 2.1, pairing of the two may be possible without the need for inputting
a “passcode” (PIN code).
• While using this unit via a Bluetooth connection to listen to music on a device equipped
with Bluetooth wireless technology, do not make another Bluetooth connection between
that device and any other device. If the Bluetooth wireless technology-equipped device
already has a Bluetooth connection with some device other than this unit, disconnect
that device before connecting this unit.
About Bluetooth wireless technology
• Bluetooth wireless technology is a short-range wireless technology designed to allow
communication between digital devices. Since radio waves are used, the
communicating devices do not need to be facing each other.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other
trademarks and trade names are those of their respective owners.
En
AS-BT200.book
9 ページ
２０１０年１２月１７日
金曜日
午前１１時２６分
Glossary
• Pairing:
To preregister the devices to be connected using Bluetooth wireless technology.
• AVRCP (Audio/Video Remote Control Profile)
A profile used for remote control of an AV device using Bluetooth wireless technology.
English
• A2DP (Advanced Audio Distribution Profile)
A profile used to transmit audio using Bluetooth wireless technology.
• SCMS-T
A form of contents protection used by Bluetooth wireless technology.
Additional Information
Specifications
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 5 V
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth Specification Ver. 2.1 + EDR
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth Specification Class 2
Estimated line-of-sight transmission distance* . . . . . . . . . . . . . . . . . . . . . . . . . . About 10 m
Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 GHz
Modulation. . . . . . . . . . . . . . . . . . . . . . . . . . . FH-SS (Frequency Hopping Spread Spectrum)
Supported Bluetooth profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2DP, AVRCP, SPP
Supported Codec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SBC (Subband Codec)
Supported contents protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCMS-T
External dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 30.5 mm (W) x 9.0 mm (H) x 50 mm (D)
1 1/4 in. (W) x 3/8 in. (H) x 2 in. (D)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .About 11 g/0.4 oz
* The line-of-sight transmission distance is an estimate. Actual transmission distances
supported may differ depending on surrounding conditions.
Note
Specifications and design subject to modification without notice.
Cleaning the unit
Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted
five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do
not use furniture wax or cleansers.
Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit,
since these will corrode the surface.
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
En
ADDITIONAL INFORMATION for Bluetooth Adapter
For US model
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For US and Canadian model
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of this device.
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply
without testing of specific absorption ratio (SAR).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition dans le
Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique
(DAS).
For Canadian model
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il
faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Modify Date                     : 2011:02:23 16:41:42+09:00
Create Date                     : 2011:02:09 10:36:18+09:00
Metadata Date                   : 2011:02:23 16:41:42+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : AS-BT200.book
Creator                         : 0130674
Document ID                     : uuid:b191bacc-ae3f-4f3d-8db6-edc9d07d9ab9
Instance ID                     : uuid:b7c1c575-bcf5-4a46-8929-01491226ba98
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Page Count                      : 10
Author                          : 0130674

EXIF Metadata provided by EXIF.tools