Pismolabs Technology P1217 Pepwave Wireless Product User Manual PePLink Balance
Pismo Labs Technology Limited Pepwave Wireless Product PePLink Balance
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1519637 |
| Application ID | dtydelc4MB17zH9TWrQVtw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 75.43kB (942857 bits) |
| Date Submitted | 2011-08-09 00:00:00 |
| Date Available | 2011-08-09 00:00:00 |
| Creation Date | 2011-07-06 12:56:38 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2011-07-06 12:56:45 |
| Document Title | PePLink Balance User Manual |
| Document Creator | Acrobat PDFMaker 10.0 for Word |
| Document Author: | psung |
User Manual Pepwave Surf Series: Surf mini Surf 400 Surf 400-DX July 11 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2011 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Pepwave User Manual Table of Contents COPYRIGHT ..................................................................................................................................... 3 DISCLAIMER ..................................................................................................................................... 3 PRODUCT DESCRIPTION ................................................................................................................. 4 3.1 3.2 3.3 PRODUCT FEATURES ..................................................................................................................... 4 HARDWARE SETUP ........................................................................................................................ 5 LED DESCRIPTION ........................................................................................................................ 6 USING THE PEPWAVE DEVICES ....................................................................................................... 8 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 APPENDIX: PRE-CONFIGURING PC SETUP ....................................................................................................... 8 FIRST TIME SETUP ........................................................................................................................... 9 SETTINGS DETAILS ....................................................................................................................... 13 INTEGRATED WI-FI ACCESS POINT CONFIGURATION .................................................................... 18 TEST THE SETUP ............................................................................................................................ 21 PORT FORWARDING ................................................................................................................... 22 QOS ......................................................................................................................................... 24 FIRMWARE UPGRADE ................................................................................................................. 25 DEBUG AND SYSTEM INFORMATION ............................................................................................. 26 RESTORE TO DEFAULT SETTINGS .................................................................................................... 27 .......................................................................................................................................... 28 FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT ............................................... 28 Pepwave Surf / Surf AP / Surf DX Series -2- Copyright © 2011 Pepwave Pepwave User Manual Copyright Copyright © 2011 by Pepwave Ltd. The content of this documentation may not be reproduced in any part or as a whole without the prior written permission of Pepwave Ltd. Disclaimer Pepwave does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent right nor the patent rights of others. Pepwave further reserves the right to make changes in any products described herein without notice. This documentation is subject to change without notice. Pepwave Surf / Surf AP / Surf DX Series -3- Copyright © 2011 Pepwave Pepwave User Manual Product Description 3.1 Product Features Signal strength LED for showing the current signal strength Always-on, integrated Wi-Fi access point (except Surf 400-DX) WPA/WPA2-Personal and WPA/WPA2-Enterprise security support Wi-Fi Multimedia (WMM) support Built-in DHCP server and NAT routing to manage client devices Customizable, built-in web portal for simple web-based configuration Surf 400-DX Surf mini /400 Pepwave Surf / Surf AP / Surf DX Series -4- Copyright © 2011 Pepwave Pepwave User Manual 3.2 Hardware Setup 3.2.1 Surf mini 1. Attach the provided antenna to the right most antenna connector 2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable. 3. Connect the end of the included power adapter to the power socket on Pepwave Surf mini. 4. Switch on the power adaptor. 3.2.2 Surf 400 1. Attach the provided antenna to the right most antenna connector 2. Connect the LAN port to the computer’s Ethernet port with an Ethernet cable. 3. Connect the end of the included power adapter to the power socket on Pepwave Surf 400. 4. Optionally, connect a 3G USB Modem to the USB Port. 5. Switch on the power adaptor. 3.2.3 Surf DX Series Please follow the installation guide to set up the Pepwave Surf 400-DX. Pepwave Surf / Surf AP / Surf DX Series -5- Copyright © 2011 Pepwave Pepwave User Manual 3.3 LED Description 3.3.1 Surf mini / 400 Series LED PWR RDY Color Green Green Green ENET Green Pepwave Surf / Surf AP / Surf DX Series Status Description On Power is on Off Power is off On Device is booted Off Device is not booted On Ethernet is connected Blinking Sending/Receiving data Off Ethernet is not connected On Associated with an access point Blinking Acquiring IP address Off Not associated with any access point Number of LED The number of lit signal bars depends on the strength of the received signal. A larger number of lit signal bars indicate stronger signals. -6- Copyright © 2011 Pepwave Pepwave User Manual 3.3.2 Surf DX Series LED PWR LAN Wi-Fi Pepwave Surf / Surf AP / Surf DX Series Color Green Green Green Status Description On Power is on Off Power is off On Ethernet is connected Off Ethernet is not connected On Associated with an access point. The number of LED lights from “MIN” to “MAX” indicates the received signal strength level. Off Not associated with any access point -7- Copyright © 2011 Pepwave Pepwave User Manual Using the Pepwave Devices 4.1 Pre-configuring PC Setup You should set up your computer’s LAN interface to obtain an IP address automatically. If you do so, you should have set it up correctly. In order to do so, select the Start menu, Control Panel and then Network Connections. Right click on the Local Area Connection icon, choose Properties, and double-click on the item Internet Protocol (TCP/IP) from the list. On the screen, just set it as follows: Click the OK button to confirm the change. Pepwave Surf / Surf AP / Surf DX Series -8- Copyright © 2011 Pepwave Pepwave User Manual 4.2 First Time Setup On your PC, start a web browser, e.g. Internet Explorer, Mozilla Firefox, etc. Visit an Internet web site. If you are not associated to an access point, you should be redirected to a logon page. Or you can go also go to this URL http://192.168.20.1/ The page will look like this. Illustration 1: Welcome Page Pepwave Surf / Surf AP / Surf DX Series -9- Copyright © 2011 Pepwave Pepwave User Manual Click the Advanced Config button to enter the parameters of the access point to associate to. You should see this screen: Illustration 2: Pepwave Surf AP Setup Page Pepwave Surf / Surf AP / Surf DX Series - 10 - Copyright © 2011 Pepwave Pepwave User Manual In the field SSID under Wireless Settings, input the access point’s SSID (sometimes it is called the “network name”). According to the setting of the Access Point you are associating to, you may choose a different Authentication setting. If Static WEP key or WPA/WPA2-Personal is selected for Authentication, input the Encryption Key field as well. (There are also options of 802.1x with dynamic WEP key and WPA/WPA2-Enterprise. You do not need to use these settings unless instructed to do so by your ISP.) Click the Save button at the bottom to complete. You can now click the Connect link on the top bar and then click the Connect button to associate with the access point. Pepwave Surf / Surf AP / Surf DX Series - 11 - Copyright © 2011 Pepwave Pepwave User Manual Illustration 3: Establishing Connection to the Internet At this point, you are associated with the access point. You may now close the web browser and open a new one to start web browsing. Pepwave Surf / Surf AP / Surf DX Series - 12 - Copyright © 2011 Pepwave Pepwave User Manual 4.3 Settings Details 4.3.1 IP Settings Illustration 4: IP Settings IP Settings LAN Interface DHCP Server To configure the LAN interface’s IP address and subnet mask. (Applicable to Surf AP / Surf DX) To configure and enable the built-in DHCP server or not. If enabled, the IP address range can be configured. Configure DHCP Reservation if there is a need to assign a specific IP address to a specific MAC address using DHCP. Pepwave Surf / Surf AP / Surf DX Series - 13 - Copyright © 2011 Pepwave Pepwave User Manual 4.3.2 Wireless Settings Illustration 5: Wireless Settings Wireless Settings SSID To configure the SSID / ESSID / Network Name of the wireless network to associate to. Radio Mode It allows the user to choose between radio modulations support. E.g. 802.11b/g, 802.11g only, 802.11b, etc. The available settings depend on the Wi-Fi module installed on the device. Channel Scanning Mode Bit Rate Authentication Preferred AP To select different channels that preferred to scan. To fix the 802.11 transmit bit rate. Available options depend on the Radio Mode chosen. If auto is chosen, the device will choose the best bit rate dynamically and automatically. Available options are Open, Static WEP Key, 802.1x with dynamic WEP key, WPA/WPA2-Enterprise and WPA/WPA2-Personal. The selection should be according to the setting of the access point you are associating to. Data transferred are encrypted under all modes except in Open mode. When Static WEP Key or WPA/WPA2-Personal is chosen, you should enter an encryption key in the Encryption Key field. You do not need to use 802.1x and WPA/WPA2-Enterprise unless instructed to do so by your ISP. The MAC address of a preferred access point can be entered here. When the preferred access point is found and its signal strength is higher than the Min Signal Strength, it will connect to this preferred access point, no matter the other access points are found even they have higher signal strength or the same SSID. Pepwave Surf / Surf AP / Surf DX Series - 14 - Copyright © 2011 Pepwave Pepwave User Manual 4.3.3 Roaming Settings for Surf Indoor / Surf DX Series: Illustration 6: Roaming Settings Roaming Settings Roaming Settings To configure and enable roaming among APs with the same SSID and authentication method. Background Scanning Interval The time interval between background scans. Roaming Threshold (Signal Level Gain) If there is another AP with a signal level greater than the signal level of connected AP by the specified value, it will reconnect to the AP with better signal. Pepwave Surf / Surf AP / Surf DX Series - 15 - Copyright © 2011 Pepwave Pepwave User Manual 4.3.4 Wireless IP Settings Illustration 7: Wireless IP Settings Wireless IP Settings IP Settings MTU Size AP Settings The IP address can be obtained automatically or configured manually. If you choose to manually configure the IP address for your unit, enter the fields IP Address, Subnet Mask, Default Gateway, Preferred DNS Server and Alternate DNS Server. You may also set the MTU Size to increase the data packet size your unit can handle at one time. (Applicable to Surf AP Series) The AP Settings will be covered in detail in the subsequent section Integrated Wi-Fi Access Point Configuration. Pepwave Surf / Surf AP / Surf DX Series - 16 - Copyright © 2011 Pepwave Pepwave User Manual 4.3.5 Restore and Reboot Illustration 8: Restore and Reboot Restore and Reboot WAI Redirection Web Password Protection Restore Factory Settings Reboot CPE If the device is not connected to an access point, and the user is accessing an Internet web site, the settings control whether to redirect the web access to the web admin interface page or not. If this is disabled and the device is not connected, the browser will show a web access error message. The user can still access the web admin interface by accessing to the device’s LAN IP address. By default, the LAN IP address is set as http://192.168.20.1. Sets the password to protect the web user interface. To restore the device to default settings. When this option is clicked, default settings will be restored and the unit will be restarted. To restart the device. Pepwave Surf / Surf AP / Surf DX Series - 17 - Copyright © 2011 Pepwave Pepwave User Manual 4.4 Integrated Wi-Fi Access Point Configuration Integrated Wi-Fi Access Point is configured via the CPE Setup tab. The following sections will provide information as a guide through the configuration. The available Access Point (AP) settings for the Integrated Wi-Fi Access Point functionality are as follows: Disable Integrated Wi-Fi Access Point functionality is disabled. Configure Manually Manual configuration of the SSID, Authentication, and Encryption Key values corresponding to the Access Point. Configure Automatically The SSID, Authentication, and Encryption Key values corresponding to the Access Point are automatically configured to be the same as the respective values that correspond to the ISP’s network. 4.4.1 Access Point Disabled Illustration 9: Access Point Disabled Pepwave Surf / Surf AP / Surf DX Series - 18 - Copyright © 2011 Pepwave Pepwave User Manual 4.4.2 Access Point configure Manually Illustration 10: Access Point Configure Manually Configure Manually AP SSID In Manual Configuration mode, the SSID is manually entered. It can be one of three configurable values: Authentication Pepwave Surf / Surf AP / Surf DX Series • Open No Encryption Key is necessary. • Static WEP Key A 64- or 128-bit Encryption Key is required, and can be entered in either an ASCII or HEX representation. • WPA/WPA2-Personal An Encryption Key, of at least 8 characters, is required. - 19 - Copyright © 2011 Pepwave Pepwave User Manual 4.4.3 Access Point Configure Automatically Illustration 11: Access Point Configure Automatically AP Settings Broadcast SSID With this option enabled, the configured SSID will be broadcast such that it can be detected by an SSID scan. Otherwise, the configured SSID will not be broadcast such that it cannot be detected by an SSID scan. In order to connect with the access point, the SSID needs to be known by the client. Client Isolation Prevent wireless clients connected to the AP from communicating with each other. Keep AP With this option enabled, the Wi-Fi Access Point will always on even if there is no connection to the mesh network. AP Transmit Power Adjustment An option to retain a lower power setting for indoor home devices. Available options are between -1 dBm and –15dBm. With the Access Point Configuration set to Configure Automatically, the SSID, Authentication, and Encryption Key values of the Integrated Wi-Fi Access Point will be configured to be the same as in the 4.3.2 Wireless IP Settings section. This configuration mode is effectively equivalent to directly connecting 802.1b/g devices on the customers’ premises with Citywide Wi-Fi. Important Note In the Wireless Settings section, if Authentication is set to either 802.1x with dynamic WEP key or WPA/WPA2-Enterprise, then the Configure Automatically option of the Access Point Configuration becomes unavailable, because the Integrated Wi-Fi Access Point functionality currently does not support authentication via the 802.1x with dynamic WEP key and WPA/WPA2-Enterprise methods. Pepwave Surf / Surf AP / Surf DX Series - 20 - Copyright © 2011 Pepwave Pepwave User Manual 4.5 Test the Setup To test the setup, you can now go to the unit’s main page, enter the user name and password. The realm (the text box next to the “@” sign) value can be left empty. Then click the Connect button. Illustration 12: Establishing Connection to the Internet After connected, you should see: Illustration 13: Internet Connection Established Pepwave Surf / Surf AP / Surf DX Series - 21 - Copyright © 2011 Pepwave Pepwave User Manual 4.6 Port Forwarding Port Forwarding Settings Service Port Range Protocol IP Address Del Enter a port or a range of ports that would like to forward. The Protocol for the above port(s) forwarding. You should select at least one protocol between TCP and UDP. The IP address that you would like the traffics forwarded to. By clicking the button, you can delete the corresponding rows of port forwarding rules. Illustration 14: Port Forwarding Pepwave Surf / Surf AP / Surf DX Series - 22 - Copyright © 2011 Pepwave Pepwave User Manual Below the port forwarding table is an option called DMZ Host. If you Enable this function, your Pepwave Surf will become a DMZ device. You can enter an IP address, which will be the IP address of the device that expose to the Internet. The purpose of a DMZ is to make all external users can has access to any ports of the device, so that user do not need to set up port forwarding and internet traffics can directly reach internal devices. Tip Below is a table showing some well-known ports, which is officially registered with IANA. Port Number Pepwave Surf / Surf AP / Surf DX Series Description Protocol Echo TCP, UDP 21 FTP TCP 23 TELNET TCP 25 SMTP TCP, UDP 53 DNS TCP, UDP 79 Finger TCP 80 HTTP TCP, UDP 110 POP3 TCP 119 NNTP TCP 161 SNMP TCP, UDP 162 SNMP Trap TCP, UDP - 23 - Copyright © 2011 Pepwave Pepwave User Manual 4.7 QoS QoS Settings Target Service Port Range Protocol To choose whether it is an incoming (Source) or outgoing (Destination) traffic that should be controlled by the service. Enter a port or a range of ports that would like to be controlled by the service. The Protocol for the above port(s). You should select at least one protocol between TCP and UDP. IP Address The IP address that you would like the traffics to be controlled by the service. Priority There are three choices for service priority: Background, Video and Voice. By choosing Default, priority will be automatically adjusted. Del By clicking the button, you can delete the corresponding rows of port forwarding rules. Illustration 15: QoS Pepwave Surf / Surf AP / Surf DX Series - 24 - Copyright © 2011 Pepwave Pepwave User Manual 4.8 Firmware Upgrade The Pepwave devices are able to check whether a newer firmware (the software running on the unit) is available. However, it is recommended that you do not update the firmware unless specifically instructed by your ISP to do so. When a firmware upgrade is needed, your ISP will either give you instructions or they will upgrade the firmware remotely. Illustration 16: Firmware tab showing the system information Tip It is highly recommended users to download the configuration file (download directory can be found in the next section) for backup propose before doing firmware upgrade. Pepwave Surf / Surf AP / Surf DX Series - 25 - Copyright © 2011 Pepwave Pepwave User Manual 4.9 Debug and System information Illustration 17: Debug tab showing the system information Tip Debug dump and configuration file can be downloaded through clicking the links illustrated above. If you encounter issues and would like to contact Pepwave Support Team (email: support@pepwave.com), please download the above files and attach it along with a description of your encountered issue. Pepwave Surf / Surf AP / Surf DX Series - 26 - Copyright © 2011 Pepwave Pepwave User Manual 4.10 Restore to Default Settings 4.10.1 Surf Indoor Series There are two ways to restore the Pepwave Surf Indoor unit to default settings. If you are able to access the web admin interface, go to the CPE Setup page, and click the Restore and Reboot button. Otherwise, you can also power up the unit and wait for about 1 min. Then press the Reset Button at the rear side of the unit using a pin and then hold it for 5 seconds. The unit will restore the settings to factory default and reboot. Reset Button 4.10.2 Surf DX Series There are two ways to restore the Pepwave Surf DX to default settings. If you are able to access the web admin interface, go to the CPE Setup page, and click the Restore and Reboot button. Otherwise, you can also power up the Surf DX unit and wait for about 1 min. Then push the Reset Button at the panel side of the unit and then hold it for 5 seconds. The unit will restore the settings to factory default and reboot. Pepwave Surf / Surf AP / Surf DX Series - 27 - Copyright © 2011 Pepwave Pepwave User Manual Appendix: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Pepwave Surf / Surf AP / Surf DX Series - 28 - Copyright © 2011 Pepwave www.pepwave.com Contact Us: Address: Sales sales@pepwave.com United States Office 800 West El Camino Real, Mountain View CA 94040 United States Tel: +1 (650) 331 0641 Fax: +1 (650) 625 4664 Support support@pepwave.com Business Development and Partnerships partners@pepwave.com Hong Kong Office 17/F, Park Building, 476 Castle Peak Road Cheung Sha Wan Hong Kong Tel: +852 2990 7600 Fax: +852 3007 0588
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : psung Company : PePLink Ltd Create Date : 2011:07:06 12:56:38+08:00 Modify Date : 2011:07:06 12:56:45+08:00 Source Modified : D:20110706045632 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2011:07:06 12:56:45+08:00 Creator Tool : Acrobat PDFMaker 10.0 for Word Document ID : uuid:bbecdf11-0df8-43b1-b7d9-ea391b00a1b4 Instance ID : uuid:4c2df79a-802f-4351-8645-9aa310e65b5c Format : application/pdf Title : PePLink Balance User Manual Description : Creator : psung Producer : Adobe PDF Library 10.0 Keywords : Page Layout : OneColumn Page Count : 29EXIF Metadata provided by EXIF.tools