Pittasoft DR650S-2CH Driving Recorder User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3013629
Application ID	jLEoCrcjSrmW8j7nUuI7uA==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	375.3kB (4691298 bits)
Date Submitted	2016-06-01 00:00:00
Date Available	2016-06-01 00:00:00
Creation Date	2016-06-01 13:25:02
Producing Software	3-Heights(TM) PDF Security Shell 4.5.24.6 (http://www.pdf-tools.com)
Document Lastmod	2016-06-01 13:25:29
Document Title	User Manual 1
Document Creator	Adobe InDesign CC 2015 (Windows)

BLACKVUE
DR650S-2CH
For manuals, customer support and FAQs go to www.blackvue.com
Important safety information
For user safety and to avoid property damage, read through this manual and follow these
safety instructions to use the product correctly.
yy Do not disassemble, repair, or modify the product yourself.
Doing so may cause fire, electric shock, or malfunction. For internal inspection and
repair, contact the service center.
yy Do not adjust the product while driving.
Doing so may cause an accident. Stop or park your car in a safe place before installing
and setting up the product.
yy Do not operate the product with wet hands.
Doing so may cause electric shock.
yy If any foreign matter gets inside the product, detach the power cord immediately.
Contact the service center for repair.
yy Do not cover the product with any material.
Doing so may cause external deformation of the product or fire. Use the product and
peripherals in a well-ventilated location.
yy If the product is used outside the optimal temperature range (-20°C - 60°C / -4°F 140°F), performance can decline or malfunctions may occur.
yy When entering or exiting a tunnel, when directly facing into bright sunlight, or when
recording at night without lighting the quality of recorded video may deteriorate.
yy If the product is damaged or the power supply is cut due to an accident, video may not
be recorded.
yy Do not remove the microSD card while the microSD card is saving or reading data.
yy The data can be damaged or malfunctions may occur.
DR650S-2CH
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protections against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception which
can be determined by turning the equipment off and on, the user is encouraged to ty to
correct the interference by one or more of the following measures.
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and receiver.
yy Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
yy Consult the dealer or an experienced radio, TV technician for help.
yy Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved
by the grantee or manufacture could void the user’s authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation of this device.
FCC ID: YCK-DR650S-2CH
BLACKVUE
CAUTION
Any changed or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
CE WARNING
yy Changes and modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
yy It is desirable that it be installed and operated with at least 20cm or more between the
radiator and a person’s body (excluding extremities: hand, wrists, feet, and ankles).
DR650S-2CH
Disposal of your BlackVue dashcam
1. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities. Contact local
authorities to learn about disposal and recycling options available in
your area.
2. The correct disposal of your BlackVue dashcam will help prevent
potential negative consequences for the environment and human
health.
3. For more detailed information about disposal of your BlackVue
dashcam, please contact your city office, waste disposal service or the
shop where you purchased the product.
BLACKVUE
In the box
Check the box for each of the following items before installing the BlackVue dashcam.
Front camera
Quick start guide
Power cord
Cable clips
(8 EA)
Double-sided tape for
the Mounting Brackets
microSD Card
microSD card reader
Rear camera
Rear camera
connection cable
Pry tool
Need help?
Download the manual (including FAQs) and the latest firmware from www.blackvue.com
Or contact a Customer Support expert at cs@pittasoft.com
DR650S-2CH
At a glance
The following diagrams explain each part of the BlackVue dashcam.
Front camera
118.5 mm
Camera lens
36 mm
55 mm
Lock button
Mounting bracket
Front security LED
:B
 links slowly in normal and parking mode.
: Blinks quickly when (i) an event is being
recorded (impact detected), (ii) manual
recording has started, or (iii) motion is
detected in parking mode.
QR Code:
Used to register your camera
for the Cloud Service (leave
attached for easy access).
GPS LED
: GPS is on
Speaker
Cloud code
Recording LED
: Blinks orange in normal mode.
: Blinks red when (i) an event is being recorded (impact
detected), or (ii) manual recording has started.
: Blinks green when motion is detected in parking mode.
BLACKVUE
Wi-Fi/Internet LED
: Direct Wi-Fi is on.
: Blinks when connected to the
internet (Cloud connected).
Manual recording proximity sensor:
Touch or wave a finger within 20mm of
the sensor to start a manual recording.
Rear camera connection port
DC in
(power connector)
Cover
microSD card slot
Wi-Fi / Format button
* Self-format function: To format the microSD
card press the button for 10 seconds until
the dashcam beeps.
DR650S-2CH
Rear camera
Camera lens
25 mm
31 mm
Mounting bracket
67.4 mm
V out
(Front camera
connection port)
10 BLACKVUE
Rear security LED
: Rear camera is on
(on in all recording
modes).
STEP 1
Install and power up
Install the front camera behind the rear view mirror. Install the rear camera at the top of
the back windshield. Remove any foreign matter and clean and dry the windshield before
installation.
Warning
yy Do not install the product in a location where it can obstruct the driver's field of
vision.
Turn off the engine.
Peel off the protective film from the double-sided tape and attach the front camera
to the windshield behind the rear-view mirror.
Adjust the angle of the lens by rotating the body of the front camera. We
recommend pointing the lens slightly downwards (≈10° below horizontal), so as to
record video with a 6:4 road to background ratio.
DR650S-2CH 11
Peel off the protective film from the double-sided tape and attach the rear camera
to the rear windshield. Adjust the angle of the lens by rotating the body of the rear
camera.
Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear
camera connection cable.
Use the pry tool to lift the edges of the rubber window sealing and molding and
tuck in the rear camera connection cable.
Rear camera connection cable
Plug the power cord into the cigarette lighter socket and the front camera.
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the
power cord.
Rear camera connection cable
12 BLACKVUE
Power cord
Turn on the engine. The BlackVue dashcam will power up and start recording. Video
files are stored on the microSD card. When the microSD card fills up, the newest
video files will start to replace the oldest video files (called loop recording) – so you
will always have the most recent video files.
Note
yy The recording LED blinks while recording (default setting) and the GPS LED is
on when a GPS signal is received. There are 4 recording modes: Normal, Event,
Parking and Manual. The dashcam starts recording in normal mode, switches to
event mode when an impact is detected, and switches to parking mode if the
vehicle is stationary for 10 minutes. Touching the manual recording proximity
sensor will start a manual recording.
yy When you run the dashcam for the first time the firmware is automatically loaded
onto the microSD card. After the firmware has been loaded onto the microSD
card you can customize settings using BlackVue Viewer on a computer.
Turn off the engine. The dashcam will automatically stop recording and power
down. To record in parking mode while the engine is off please install a Power
Magic Battery Pack (sold separately) or a Power Magic Pro (sold separately). A
Power Magic Pro powers your dashcam when the engine is off by hardwiring it to
the automotive battery. A low voltage power cut-off function and a parking mode
timer protect the automotive battery from discharge.
DR650S-2CH 13
STEP 2
Playback
Playing video files on your smartphone (Android/iOS)
Search for the BlackVue C app in the Google Play Store or Apple App Store and
install it on your smartphone.
“Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi:
(i) Go to your smartphone’s Settings then select Wi-Fi, and make sure Wi-Fi is
turned on.
(ii) Choose your BlackVue dashcam from the network list. The dashcam’s default
SSID begins with its model number (e.g. DR650S-******).
(iii) Enter the default password ‘blackvue’ and tap Join.
(iv) Open the BlackVue C app and select BLACKVUE WI-FI.
14 BLACKVUE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:06:01 13:25:02-07:00
Creator                         : Adobe InDesign CC 2015 (Windows)
Modify Date                     : 2016:06:01 13:25:29-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:06:01 13:25:29-07:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Format                          : application/pdf
Document ID                     : uuid:cdecdd0b-a71e-40fe-b45b-1773ad53fe72
Instance ID                     : uuid:a025053b-2cbd-4c8a-b3b9-e98019122f62
Producer                        : 3-Heights(TM) PDF Security Shell 4.5.24.6 (http://www.pdf-tools.com)
Page Count                      : 15

EXIF Metadata provided by EXIF.tools