Pittasoft SC300 BLACKVUE SPORT User Manual

Pittasoft Co., Ltd. BLACKVUE SPORT

User Manual

Name Ι BLACKVUE SPORTManufacturer Ι Pittasoft Co.,Ltd. / South KoreaAddress Ι (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-718, Republic of KoreaE-mail Ι sales@pittasoft.comService Center Ι +82.2.6947.4670(ext.3)www.blackvuesport.com
BLACKVUE SPORTSC300ENGLISH
BLACKVUE SPORT I SC300 3ENGLISHIntroduction to the Manual 4Safety Precautions 5Getting Started Checking the Components 8 Understanding the Part Name and Function 10 Inserting/Removing the Memory Card 12 Inserting/Removing the Battery 13 Charging the Battery 14 Assembling the LCD (not supplied) 15Installing Camera Camera Installation 17 Installing the Camera inside a Waterproof Housing 18 Connecting Power Cable 19Shooting Turning on the Power 23 Automatic Video Recording 23Using the BLACKVUE 24SPORT APP Screen View 26 Changing the Setting Option 27 Playing Movies/Photos 30 Moving les 30 Managing the internal memory 31 Firmware Upgrade 32Product Specifications 33>Contents
>Introduction to the ManualThank you for purchasing BLACKVUE SPORT of PittaSoft Co., Ltd.This instruction manual contains information on how to operate your BLACKVUE SPORT. Before using the product, make sure to read through this manual so as to use the product in the correct way. To enhance the performance of the product, the contents of this instruction manual may be changed without prior notice.Warranty and Support yIn accordance with Personal Information Security Law & related legislation, Pitta Soft Co., Ltd. will not be held responsible for any problem due to illegal use of this product.Copyright and Trademark yThis instruction manual is protected by Copyright Law, and all rights to it are protected by law. yIt is prohibited to reproduce, copy, modify, or translate this instruction manual without permission. y BlackVue is the registered trademark of Pitta Soft Co., Ltd. PittaSoft Co., Ltd. reserves the rights regarding all works related to the BlackVue brand such as product design, trademarks, and product-promotional videos. It is prohibited to reproduce, copy, modify, or use related works without permission. Any violation may be penalized in accordance with the relevant regulations.
BLACKVUE SPORT I SC300 5ENGLISH>Safety PrecautionsThe purpose of these cautions is to maintain user safety and avoid damage to property. Please make sure to read through this manual so as to use the product in the correct way. yDo not install it in an environment with high humidity, or combustible gases or liquids.It can cause explosion & re. yDo not insert flammable materials into the camera or store these materials near the camera.This may cause a re or electric shock. yDo not expose the camera to direct sunlight or high temperatures for an extended period of time.Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components.DANGER Death or property damage can be caused for users if the following directions are not followed: yDo not disassemble, repair, or modify the product yourself.It can cause re, electric shock, or malfunction. For internal inspection and repair, call your customer service center. yIf any foreign matter gets inside the product, detach the power cord straightaway.Call the customer service center for repair. yDo not use a damaged or altered USB cable. Use the USB cable provided by the manufacturer.Otherwise it can cause explosion, re, or malfunction. yDo not operate the product with wet hands.It can cause electric shock.
yDo not leave the product where infants, children, or pets can reach it.They might swallow small components, or their saliva could get into it and cause an explosion due to a short circuit. yIf smoke or an unusual smell is emitted from the USB cable, detach it immediately.Call the customer service center or the dealer. yUse only authentic, manufacturer-recommended, Lithium-ion replacement batteries or supplied battery charger. Otherwise, Pitta Soft Co., Ltd. will not be held responsible for any problem. yDo not cover the product with any material.It can cause external deformation of the product or re. Use the product and peripherals where ventilation is ensured. yIf the camera is not used for a long period of time, remove the battery from the camera.Fluid may leak out of the battery, damaging the camera signicantly. yDo not apply excessive force to the exterior of the camera.Doing so may result in product failure. WARNING Death or serious injury can be caused for users if the following directions are not followed:
BLACKVUE SPORT I SC300 7ENGLISH yDo not spray cleaning products directly onto the outside of the product.It can cause discoloration, cracks, or malfunction. yMake sure that the product is installed properly.The product can fall as a result of vibration, and may cause physical injury. yMicroSD cards are a consumable so replace them after prolonged use.They may not record video correctly after a long time in use, so check their recording capability periodically and replace it as necessary. yClean the lens regularly.Foreign material attached to the lens can aect the recording quality. yDo not remove the microSD card while it is saving or reading data.The data may be damaged or malfunction caused. yWhen you connect the cable or insert the battery or memory card to the camera, be careful not to apply impact to the camera or connect the cable or insert the battery or memory card in a wrong direction. The insertion hole or accessory may be damaged.The camera or cable may be damaged, and if the battery and memory card are not inserted correctly, the connection terminal or accessory of the camera may be damaged. yDo not use batteries for unintended purposes.This may cause a re or electric shock. yUse Waterproof housing when the product is used at low temperature.Due to the characteristics of Li-ion Polymer Battery, battery performance may decrease when the product is used at low temperature. Waterproof housing is recommended for use at low temperature. CAUTION Injury or property damage can be caused for users if the following directions are not followed:
>Getting Started IChecking the ComponentsAfter purchasing the camera, open the box and check the following components.Battery Memory card Tape for mountWaterproof power cable Cable clip User ManualCamera
BLACKVUE SPORT I SC300 9ENGLISHWaterproof housing Cable connector Joint rubber for single cableBasic connector Tripod mount Curved mount Thumb screw Accessories (Sold separately)LCD pack for bike (LCD, Waterproof housing backdoor for LCD)Handlebar mount Note yThe image of each component or accessory may dier from the ac-tual component or accessory. yTo enhance the performance of the product, the components of this product may be changed without prior notice. yThe components and accessories can be purchased separately from the BLACKVUE SPORT homepage (www.blackvuesport.com). yThe manufacturer holds no responsibility for any problem occurred due to the use of a product which is not certied by the manufacturer. yThere is a screw hole that can be assembled with tripod screw on the bottom of the tripod mount.
IUnderstanding the Part Name and Function Check the name and function of each part rst before using the camera.Shutter/Select buttonSpeakerWi-Fi buttonLED indicators• VIDEO• PHOTO• HIGH SPEED• WiFiLED Indicators• Blinking: In shooting• Lighting: In chargingPower/Mode buttonMicrophoneUSB, HDMI outputterminal and memory card slot coverHDMI output port LCD connection terminalUSB portmicroSD card slotBattery slot cover
BLACKVUE SPORT I SC300 11ENGLISHItem DescriptionShooting mode: Start/End shootingPlayback mode* • Thumbnail view: Select a le• Playback or Pause*Setting mode*: Select a menu or setting itemWi-Fi On/O: Long pressPower On/O: Long pressMode change: Press• * Movie/Normal Photo/High-speed Shooting/Playback/Setting• *Switching between menus or setting itemsItem Description VIDEO Blue: Movie/Time Lapse mode PHOTO Blue: Photo shooting mode HIGH SPEED Blue: High speed shooting mode Wi-Fi Blue: Wi-Fi power onO: Wi-Fi power o* The items marked with are the functions supported only when LCD is mounted.
IInserting/Removing the Memory CardInserting the memory card1 Open the cover of the memory card slot.2 Insert the memory card with the metallic terminal to the left.3 Close the cover of the memory card slot. NoteBe careful not to lose the cover for the memory card slot.Removing the memory cardPress the memory card in lightly, and when the top emerges part way, pull it out completely.
BLACKVUE SPORT I SC300 13ENGLISHIInserting/Removing the BatteryInserting the battery1 Open the battery cover.2 Insert the batteries.3 Close the battery cover.Removing the BatteryRemove the battery by holding and lifting the plastic handle on the opposite side of the metallic terminal.
ICharging the BatteryCharge the battery completely when using the camera for the rst time after purchasing it.Charging by connecting the USB cable to a PC (not supplied)Charging by Connecting to the Power Adaptor(Not supplied)LED Indicators• Charging in progress : Red• Charging complete : OCharging by Connecting the Battery Charger (not supplied)(Not supplied) NoteUse only authentic, manufacturer-recommended, Lithium-ion replacement batteries or supplied battery charger. Otherwise, PittaSoft Co., Ltd. will not be held responsible for any problem. Caution yRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE ONLY THE BATTERY PROVIDED BY PITTA SOFT. yDISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS. BATTERY DISPOSAL INSTRUCTIONS MAY VARY DEPENDING ON COUNTRY AND REGION.
BLACKVUE SPORT I SC300 15ENGLISHIAssembling the LCD (not supplied)You can check the shooting scene, play back a le, or set the camera and shooting environments by mounting the LCD component to the camera.Name of each part in the LCDLCD power buttonCamera connecting terminalAssembly grooveAssembling the LCDAlign the assembly groove on the LCD with the right end of the camera, and insert the connection terminal of the LCD into the connection terminal of the camera correctly.
Removing the LCDRemove the LCD by pulling the part marked with an arrow rmly upwards. NoteAfter assembling the LCD, turn on the camera and check the LCD operates normally. If the LCD screen does not turn on, turn off the camera and assemble the LCD again using the method specied on the previous page.
BLACKVUE SPORT I SC300 17ENGLISH>Installing Camera ICamera InstallationUsing a mount, you can install the camera on a bike.Installation Using an Adhesive TapeAttach the adhesive tape to where you want to place the camera, and then mount or use the curved mount for the tripod to ax the camera onto it. NoteIf the camera is installed facing downward, reverse the view. For more details, see Changing the Setting Option (page 27).Camera Installation Using a Handle Bar Mount (not supplied)You can install the camera onto the handle via a handle bar mount and ax the camera using a tripod mount.
IInstalling the Camera inside a Waterproof HousingBy placing the camera inside a waterproof housing, you can protect your camera from external hazards (dust and water). Camera installation method is the same as the slim-type backdoor and backdoor for LCD.4 Couple the groove in the lock with the groove in the rear cover.5 Turn the lock counter clockwise to the fullest and lower the latch.6 Check if all buttons in the waterproof housing work normally.1 Before placing the camera inside the waterproof housing, ensure that you have powered o the camera.2 Lift up the latch of the lock and turn it clockwise.3 Open the cover and carefully push the camera into the waterproof housing.
BLACKVUE SPORT I SC300 19ENGLISHIConnecting Power CableUsing the waterproof housing and waterproof power cable, you can draw power from the bike’s cigar jack when it rains.Connector jackConnector jack capCigar jackConverter yDisconnect the connector jacks of waterproof power cable to prevent inconvenience arising from the long cable.Connecting Camera and Cable1 Turn connector screw clockwise and remove the S-washer and cable joint rubber.2 Insert the micro USB connector of the waterproof power cable into the cable joint rubber for single cable.3 Insert the cable joint rubber, assembled into the connector.
4 Turn the extension cable screw of waterproof housing clockwise and remove the extension cable cover.5 Connect the cable connector you have assembled in your camera.6 Insert the S-washer with the narrow side facing upwards and turn the cable connector joint screw clockwise. NoteUsing a joint rubber for multi cable, you can connect both the HDMI cable (not supplied) and the power cable at the same time.
BLACKVUE SPORT I SC300 21ENGLISHConnecting Cable with Power Supply1 Firmly mount the waterproof housing that holds the camera onto your bike. yYou can use a curved mount or a handle bar mount (not supplied) for this purpose.2 Plug the waterproof power cable connector jack in the direction, as indicated by the arrow.3 Plug the cigar jack to the bike’s power supply.4 Fasten the cable using a cable holder. NoteWhen you have no cigar jack power, cut the waterproof power cable and connect it directly to the battery, make sure that you do not cut the middle of the converter or the connector jack.Cigar jackConverterConnector jack capConnector jack
Removing Cable after Using the CameraWhen you are done with using the camera, detach periferals, and keep the camera, you do not need to remove all cables from you bike. Remove cables in a place free from water, sand, or dust.1 Disconnect the connector jacks of waterproof power cable.2 Keep the disconnected camera and cables indoorse.3 Keep the connector jack installed on your bike with a cap plugged.
BLACKVUE SPORT I SC300 23ENGLISH>Shooting ITurning on the PowerAfter charging the battery, press and hold down until the camera turns on. yPress and hold down again to turn o the camera. Note yFrom the BLACKVUE SPORT application, you can view and edit Resolu-tion/Shooting Time/Rotation View settings in full detail.For more details, see Using BLACKVUE SPORT APP (page 24). yIf you installed an LCD, you can change the settings in Camera Settings. For how to set and use your camera with an installed LCD, see BLACKVUE SPORT website at www.blackvuesport.com.IAutomatic Video RecordingIf you have ther camera connected to the bike power supply, you can record video during the entirel time you are biking. Up to full HD image resolution with 1920 x 1080 pixels at 30fps, video images are recorded in the MP4 format.1 Press and select the video mode. yOn the LED of your camera, the menu VIDEO will appear in blue.2 Press to start video recording.3 Press once again to end video recording. Note yThe le name of the video recording will be recorded in MMDDHHMM (month/date/hour/minute) format. yVideo recordings are stored by unit of time specied, the default setting is 1 minute. yIf storage is insucient, the oldest les will be deleted by default.
>Using the BLACKVUE SPORT APPYou can control or manage the camera from a wireless device (smartphone or tablet PC) where the BLACKVUE SPORT App is installed. 1 Install and execute BLACKVUE SPORT App on a wireless device. Note yThe BLACKVUE SPORT App can be downloaded from the Google Play store and Apple App Store. yThe BLACKVUE SPORT App can be used with Android 2.3 or later and iOS 5.0 or later. ySome functions may not be supported depending on the wireless device.2 Turn on the Wi-Fi function of the wireless device. 3 Turn the camera on and press and hold down button to turn on the Wi-Fi function. It takes about 35 seconds to activate the Wi-Fi function. 4 Touch the Wi-Fi button of BLACKVUE SPORT App. (Eg: SC300) Select a list of devices to connect and enter blackvue as the password. Tap the OK button to connect it to the selected device.Android
BLACKVUE SPORT I SC300 25ENGLISHiOS Note yWi-Fi SSID can be changed from the App Settings. yIf you save the connection information when connecting using Wi-Fi, you can tap the Wi-Fi button in the BLACKVUE SPORT App to connect it without turning on the Wi-Fi function of the smartphone. (only for Android) yThe initial password is blackvue, but the user can change it. yFor the Live View function, Wi-Fi can be used within a 10m range, although the range may vary in some circumstances. yFor playback of recorded videos using Wi-Fi, reception may vary according to the data transfer rate.5 Select the recorded video you want to play back in the video list. Note yTap the Live View button to play the movie in real time. yIf you have changed Wi-Fi settings, always restart the camera. yIf you have forgotten the password, you should reset camera settings. Press and hold and at the same time for about 10 seconds, the camera will power down and all camera settings will be initialized.
IScreen View12346:7985Drag the top bar to display.No. Descriptions No. Descriptions1Moves to the Home screen.6Shoots a movie or take a picture.2Moves to the internal memory.7Watches the shooting screen in real time.3Displays the captured screen in real time.8Moves to the list of movies/pictures.4Changes the mode.9Moves to the setting screen.5Displays the setting options of the camera.:Allows you to check the version information.
BLACKVUE SPORT I SC300 27ENGLISHIChanging the Setting Option1 Press BlackVue Sport ▶ SETTINGS ▶ App Settings or Camera Settings to access the setting screen.2 Select a desired setting menu, and select the setting to change.3 Press Save to save the setting. Press EXIT to return to the previous screen without saving the setting. Note yIf you have changed Wi-Fi settings, always restart the camera. yThe date is originally set to default. You can set the date manually by connecting with BLACKVUE SPORT APP. (SETTINGS ▶ Camera Settings ▶ Other Settings ▶ Date/Time)Android iOS
NoteYou can reverse the LCD screen by activating Rotation in the Image Settings.Setting OptionMode Menu Setting OptionApp SettingsAlways use BlackVue S playerOnOEnable Wi-Fi Strength MonitorOnOCamera Settings Video SettingsResolution/FPSVideo Quality Time LapseRecording TimeOverwriteMode Menu Setting OptionCamera Settings Photo SettingsResolutionImage QualityBurst ShotSelf TimerImage Settings Rotation
BLACKVUE SPORT I SC300 29ENGLISHMode Menu Setting OptionCamera Settings Other SettingsDate/TimeWi-FiVoice Record VolumeAutomatic RecoveryAuto Power ODefault SettingFormat
IPlaying Movies/Photos1 Press BlackVue Sport ▶ LIST ▶ 100BVSCM. 2 Select a desired movie or photo.IMoving les1 Press BlackVue Sport ▶ LIST ▶100BVSCM. 2 Select a desired le, and press and hold down the le until the menu is displayed.3 Press Copy les to internal storage to move the selected le to the internal memory.
BLACKVUE SPORT I SC300 31ENGLISHIManaging the internal memory1 Press Internal Memory. 2 Select a desired le, and press and hold down the le until the menu is displayed.3 Press each menu to edit the selected le. yCancel: Returns to the previous screen. yCopy: Copies the selected video/photo. yCut: Cuts the selected video/photo. yRename: Renames the video/photo you have selected. yDelete: Deletes the selected video/photo. NoteYou can copy, clip or delete a movie/photo file after pressing Multi by dragging the top bar.
IFirmware UpgradeYou can upgrade the rmware version by saving the rmware to a microSD card and connecting the microSD card into the PC.1 Access the BLACKVUE SPORT web site (www.blackvuesport.com) and download the rmware upgrade le.2 Insert the provided microSD card into a microSD card reader.3 Connect the microSD card reader to the PC and copy the downloaded rmware to the microSD card.4 Detach the microSD card from the microSD card reader, and insert the microSD card into the camera. 5 When the power is turned on, it is automatically upgraded. Note yMake sure that the power is never turned o while rmware upgrade is in progress. yWhen the remaining battery level is below one, you cannot upgrade the rmware. yDuring upgrade, you can check the upgrade status through the LED indicators. VIDEO LED starts blinking rst, and then the other LEDs blink additionally according to upgrade status. yThe camera turns o automatically after updating the rmware. Press the power button to use the camera.
BLACKVUE SPORT I SC300 33ENGLISH>Product SpecicationsTo enhance the performance of the product, the product specications may be changed without prior notice.BatteryType Rechargeable 1050mAh Li-ion Polymer BatteryCharging Micro USBVideoFormat MP4Resolution/FPS 1080p 30fps720p 60/30fpsTime Laps Recording1, 5, 30, 60, 300, 600 second intervalsPhotoFormat JPEGResolution3.5M (2304x1536 3:2)3M (2048x1536 4:3)3M (2304x1286 16:9)High Speed Shooting Resolution/FPS 480p 120fpsModel BLACKVUE SPORTCameraPixel 3.5 Mega PixelAngle of View Opposite Angle 138˚Weight 77g (LCD : 22g) LCD optionalSize (WxLxH) 55mm x 36.7mm x 44.2mmSensor3.5M CMOS SensorH/W InterfaceStorage micro SD CardUp to 32 GBClass10 or higher microSD cards are recommendedInput/Output USB 2.0 / USB 2.0, HDMIButton Power/Mode, Wi-Fi, Shutter/ChoiceLCD 2.0 inch, 240p
Wi-Fi13 Channel 802.11b/g/n(20)9 Channel 802.11n(40)PCM DSSS(CCK), OFDM(QAM)AudioMic Built-in, MonoFormat 128kHz, AACSoftware Application BLACKVUE SPORT APPAndroid 2.3 or later, iOS 5.0 or laterWaterproofDegree IP68HousingDepth Rate 10m / 32ftFrontcase (basic) OptionFrontcase (extended)Backdoor (for LCD) OptionBackdoor (silm)Waterproof power cable External power supplyOperation Temperature0°C ~ 45°C※ Due to the characteristics of Li-ion Polymer Battery, product performance may decrease when the product is used under 0 degree.
FCC Compliance Information (FCC ID: YCK-SC300)THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and receiver. yConnect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. yConsult the dealer or an experienced radio/TV technician for help. Modications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules.
Product Warranty The term of this product warranty is 1 year from the purchase date. (Accessories such as Battery : 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). PittaSoft or designated partners will provide the service upon request.Product Name (Model Name) Serial No.Purchased When Purchased WhereCustomer Information Address / Call NumberConsumer InjuryWarrantyWithin the Term Out of the TermFor performance / functional problems under normal use conditionsFor serious repair required within 10 days of purchase Exchange/RefundN/AFor serious repair required within 1 month of purchaseExchangeFor serious repair required within 1 month of exchangeExchange/RefundWhen not exchangeable Refund
Consumer InjuryWarrantyWithin the Term Out of the TermFor performance / functional problems under normal use conditionsRepair If AvailableFor Defect Free Repair Paid Repair/ Paid Product ExchangeRepeated problem with the same defect (up to 3 times)Exchange/RefundRepeated trouble with dierent parts (up to 5 times)Repair If UnavailableFor the loss of a product while in A/S Refund after depreciation plus an additional 10% Maximum: purchase price)When repair is unavailable due to lack of spare parts within the component holding periodWhen repair is unavailable even with spare parts Exchange/Refund after depreciation1) Malfunction due to customer fault- Malfunction & damage caused by user negligence (fall, shock, damage, unreasonable operation, etc) or careless use- Malfunction & damage occurred after a repair conducted by the consumer of the third person, not our A/S engineer.- Malfunction & damage due to used of unauthorized components, consumables, or separately sold parts2) Other Cases- Malfunction due to natural disasters (re, ood, earthquake, etc)- Expired life span of a consumable part- Malfunction due to external reasonsPaid Repair Paid Repair This warranty is only valid in the country where you purchased the product. Exchange or refund is available only in the original place of purchase.
MEMO
MEMO
Name Ι BLACKVUE SPORTManufacturer Ι Pittasoft Co.,Ltd. / South KoreaAddress Ι (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-718, Republic of KoreaE-mail Ι sales@pittasoft.comService Center Ι +82.2.6947.4670(ext.3)www.blackvuesport.com

Navigation menu