Pixel Enterprise WTCTW-282TX Wireless Timer Remote Control User Manual TW 282English
Pixel Enterprise Limited Wireless Timer Remote Control TW 282English
User Manual Jan. 06
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1402679 |
| Application ID | f53tNslEjV8HAEz3DtY2ag== |
| Document Description | User Manual Jan. 06 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 249.54kB (3119274 bits) |
| Date Submitted | 2011-01-11 00:00:00 |
| Date Available | 2011-01-11 00:00:00 |
| Creation Date | 2011-01-06 07:35:04 |
| Producing Software | Corel PDF Engine Version 3.0.0.667 |
| Document Lastmod | 2011-01-06 07:35:04 |
| Document Title | TW-282English.cdr |
| Document Creator | CorelDRAW |
| Document Author: | nacy |
Wireless Timer Remote Control 无线定时快门线 TW-282 50202 V10.01 Contents Overview Cautions TW-282 introduction The name of each part Prepare for install and use Install and replace the battery Fix the receiver(TW-282RX) Turned on/off the power Channel Setting Open the background light of display Receiver connected with the camera Shooting control Single shooting Continuous shooting within one sec 03 04 07 08 11 11 13 14 15 17 18 19 19 20 Overview Thank you for purchasing high-performance PIXEL products ]shooting Delay shooting Timing plan for shooting 22 23 26 First of all, thank you for purchasing product of PIXEL TW-282. The shooting ways included single shooting, continuous shooting within one sec, [ shooting, user-defined time-delay and timing plan for shooting. Low consumption of LCD display will make you be clear at a glance of the using status and using plan. Before use this product, you must read and fully understand this manual, then learn to use the camera to ensure you are familiar with the operation properly. Through this manual you can easily handle the operation method and the attentive things. This manual is current update of 1st Sep, 2009. Please contact to PIXEL distributor for further information, if interesting of the combining usage with products released after this day. The name of each part Please check all included items after contact the dealer. 1. Transmitter (TW-282TX) ------- 1pc 3. 1.5V AAA battery ---------------- 2pcs 5. Shutter connect cable ---------- 1pc The name of each part open the packing, if missing, please 2. Receiver (TW-282RX) ---------- 1pc 4. CR-2 Lithium battery ------------ 1pc 6. Manual(this manual) ------------ 1pc Here are the names of each part: 10 Receiver (TW-282RX) 10 Low battery voltage icon Power button/channel reduce button Power indicator Background light button/ channel increase button Channel display screen Battery hatch Battery compartment Output control signal interface Hot shoe fixed mount Hot shoe fixed nut 11 14 10 13 12 10 12 Transmitter(TW-282TX) 13 14 Output control socket Background light button Left move button Decrement button Release button 6 Set button Right move button Increment button Timing plan start/stop button Display 11 Shutter indicator Battery hatch Product back sticker Item code Preparation for installation and use The name of each part Display of transmitter 10 11 12 13 DC0 DC1 DC2 E3 N3 S1 RS1 UC1 CB1 Install and replace the battery The transmitter(TW-282TX) 6 7 8 Shutter connect cable 1 Input plug 2 Shutter connect plug Display of transmitter 11 13 10 Before use, you should read the user manual of your camera carefully and well understand the manipulation and functional setting. The function setting of camera may influence this item’s efficiency control of the camera. Timing plan function area Function area Continuous shooting within one sec icon Delay shooting icon The icon of delay time The icon of interval time The icon of channel 10 12 Time display area Single shooting icon ]shooting icon Low battery voltage icon The icon of exposure time The icon of timing shots The low battery voltage icon[ ]will twinkle or the character become dim obvious when the power is not enough, that means the low battery voltage has already influence the normal work of the device, which needs to replace the battery in time. The transmitter uses 2pcs AAA batteries; Please follow the steps to replace the battery if needed. 1. Slide and open the battery hatch. 11 Preparation for installation and use 2. Follow the signs of positive [+] and negative [-] in the battery compartment to install the battery correctly. You should pay attention to the polarity of battery because of the wrong installation will make the device work abnormally, or even physical injury. 3. Close the battery hatch. The receiver(TW-282RX) TW-282RX The low battery voltage icon[ ]will twinkle when the power is not enough, that means the low battery voltage has already influenced the normal work of the device, which needs to replace the battery in time. The receiver uses CR-2 lithium battery; Please follow the steps to replace the battery if needed. 1. Slide and open the battery hatch. Preparation for installation and use Fix the receiver (TW-282RX) Receiver can be fixed on the top of camera, rack of camera accessory or tripod. Fix the receiver on the hot shoe of camera. Lock hot shoe fixed nut tightly when you fix it. Loosen hot shoe fixed nut when you remove the receiver. Do not forcibly pull it, in order to avoid damage to the receiver and camera. Fix the receiver on the rack of camera accessory. Fix the receiver on the tripod. Make sure to fix the receiver firmly so that it will not slide. 2. Follow the signs of positive [+] and negative [-] in the battery compartment to install the battery correctly. 12 13 Preparation for installation and use Turned on/off the power The transmitter(TW-282TX) 1. Press any button once, and turn on the power of transmitter. 2. Turn on the power, transmitter in single shooting state, set the timing plan and communication channel unchanged. 3. The display shows the single shooting icon and communication channel. 4. The transmitter without any operation (except timing plan or implementing [ ] status) will shut down automatically after one minute. The receiver(TW-282RX) 2s 14 1. Press the power button[ ]2s, turn on the receiver power, screen display communication channel . 2. After turn on the power, the set timing communication channel remain effectively. 3. The receiver does not turn off automatically. In the power-on state, press power button 2s and the receiver will be turned off. Preparation for installation and use Channel setting Channel setting for transmitter(TW-282TX) 1. Press left move button[ ]or right move button[ ]will move the functional icon to the channel icon[ ]. 2. Press the set button into the channel setting. 3. Thought pressing increment button[ ]or decrement button[ ] to adjust the channel number. Channel setting for receiver(TW-282RX) 1. Turn the power on, the communication channel will be default[- -]or the last setting. 2. Press the button[ +CH ]and[ CH- ]at the same time to enter the channel settings, the [ ] icon on the LCD will blinks . 3. Set the communication channel, press[ +CH ]plus one, press[ CH- ]minus one. 4. 10s no action exit and save your settings. 15 Preparation for installation and use Preparation for installation and use Open the background light of display Channel model 1. When the transmitter's communication channel adjust to [ -- ] will effectively control all channels within the region of the receiver . 2. When the receiver's communication channel adjust to [ -- ] , all transmitter in the effective reception area can control the receiver. 3. The transmitter and receiver’s value of communication channels setting must be consistent .If inconsistent, the transmitter will not be effectively controlled the receiver. The transmitter(TW-282TX) Press and hold the background light button for 3 seconds, the background light will be turned on. Open the background light and press the button twice each 6 seconds, the background light will keep lit. The background light will not be close by hand; it will turn off after 6 seconds automatically without any operation. 3s The receiver(TW-282RX) Press and hold the background light button for 3 seconds, the background light will be turned on. 3s 16 Open the background light of the receiver and press the button twice each 4 seconds, the background light will keep lit. The background light will not be close by hand; it will turn off after 4 seconds automatically without any operation. 17 Preparation for installation and use Receiver connected with the camera 1. Make sure your receiver has been installed in place and to ensure that cameras and receivers are shut down. 2. First, insert the input plug of the shutter connect cable into the receiver' s output control signal socket in place. FS Wir ele K 2 ntroll .4G er Hz ss The timer remote control will not be able to control the camera if the shutter connect cable didn’t insert correctly. 3. Fix the camera on the tripod or other fixed frame. Open the protective cover of external shutter socket and put the shutter plug of shutter connect cable in place, then make sure it has been fixed firmly. For most of camera shutter socket, there is a mis-plug interface, please note insert direction so as to avoid damage to shutter socket. 4. Turn on the receiver's power and then the camera's power. 18 Shooting control Sketch map for selecting function mode: Single shooting function Press Press Press Press Press Press Continuous shooting within one sec function ]shooting function Delay shooting function The instruction is under the premise that the receiver and camera have been connected tightly, and turned on the power of camera and receiver. The detail instruction of remote shooting will be showing as follow. Single shooting 1. In the power-on state, set the single shooting icon [ left move button[ ]or right move button[ ]. ] by pressing the In the sleeping state, press any key to wake up transmitter to enter single shooting mode. 2. Half-press the release button and transmitter will send signal for focusing, the green indicator will lit on the transmitter and receiver, and the camera is in the focusing state until the release or full-press the button. 19 Shooting control 3. Full-press the release button and transmitter will send signal of shooting. The red indicator will light for a while, the camera start shooting. Make sure to set the camera function to be [ ]. When the camera function is set to be[ ], it may cause continuous shooting. When the camera function is set to be[ ],the camera will shoot based on[ ]mode, it may cause underexposure or overexposure. When the camera function is set to be [ ], the camera will execute delay shooting. Continuous shooting within one sec 1. In the power-on state, move the transmitter’s activities icon to continuous shooting within one sec icon[ ] by pressing the left move button[ ]or right move button[ ]. Continuous shooting within one sec second is the firs patent function which issued by Pixel limited Enterprise, it'll support spacing continuous shooting within one sec and never change the single shooting mode. 20 Shooting control 2. Half-press the release button and transmitter will send signal for focusing, the green indicator will lit on the transmitter and receiver, and the camera is in the focusing state until the release or full-press the button. 3. Full-press the release button, red indicators of the transmitter and receiver will be lit, keep fully press the button, the transmitter will send signal of shooting continuously, the indicators will blink red and green light in turn. The camera will start to shot, and the shooting speed will be one photo per sec. 4. Release the release button, the transmitter stop sending signal for shooting and the camera will stop shooting. Make sure to set the camera function to be [ ]. When the camera function is set to be [ ], it may cause continuous shooting. When the camera function is set to be [ ],the camera will shoot based on [ ] function, it may cause underexposure or overexposure. When the camera function is set to be[ ], the camera will execute delay shooting. 21 Shooting control ]shooting 1. In the power-on state, move the transmitter's activities icon to [ ] shooting icon[ ] by pressing the left move button[ ]or right move button[ ]. 2. Half-press the release button and transmitter will send signal for focusing, the green indicator will lit on the transmitter and receiver, and the camera is in the focusing state until the release or full-press the button. 3. Full-press the release button, transmitter will send[ signal. The red indicator of transmitter starts flashing and start timing, the indicator of receiver will keep lighting. The transmitter continuous output shooting signal. Camera enters into exposure shooting continuously. 4. Press the release button again, transmitter will stop output shooting signals, camera stop exposure shooting. The differences between[ ]mode and[ ]mode are as follow: [ ]function is the release button is pressed fully and keep on, camera starts shooting until the release button is released. While[ ] function is the camera will start shooting when the release button is pressed fully until press it again, the shooting will stop. 22 Shooting control Make sure to set the camera function to be [ ]. When the camera function is set to be [ ], the camera only shoot once but not[ shooting. When the camera function is set to be [ ],the camera will be continuous shooting. When the camera function is set to be [ ], the camera will be delay shooting once. Delay shooting The delay shooting function of TW-282 can user-defined the delay time and shots. Delay shooting setting 1. In the power-on state, move the transmitter’s activities icon to delay shooting icon[ ] by pressing the left move button[ ]or right move button[ ]. Press the set button entering the delay setting for adjusts the shooting numbers. The delay shooting icon[ ], the numbers of shooting icon [ ],number of shooting [ ]will blink at the same time. 2. Press button[ ]settings shot number can be increased, 23 Shooting control Shooting control press button [ ], settings shot number can be reduced. It can be set between 1 to 99 sheets . 3. Press button[ ]enter into the delay setting of delay shooting. the delay shooting icon[ ] , delay shooting time icon[ ], delay shooting time value[ ]will blink at the same time. 4. Press the button[ ], set the delay time increased, press button[ ], set the delay time reduced. It can be set between 1 to 59 seconds. 5. After set up the new parameters, press the set button, save and exit settings. When enter to the delay shooting set, the transmitter will save the previous setting. By pressing the left button[ ]or right button[ ], convert shooting numbers and delay time settings. Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly increased; Press the button[ ]once to set the numerical reduced, hold on to set the values rapidly reduced. Operate the delay shooting 1. Press the left button[ ]or right button[ icon to the delay shooting icon[ ]. 24 ], move the transmitter’s activity 2. Half-press the release button and transmitter will send signal for focusing, the green indicator will lit on the transmitter and receiver, and the camera is in the focusing state until the release or full-press the button. 3. Full-press the release button, transmitter will send all the delay shooting information to receiver, the transmitter starts to delay countdown, and red indicator blink quickly and enter to the delay shooting mode. 4. When countdown is completed, receiver will follow the setting shots output a signal per second to control shooting. Make sure to set the camera function to be [ ]. When the camera function is set to be [ ], it will start continuous shooting. When the camera function is set to be [ ],the camera will shoot based on [ ] function, it may cause underexposure or overexposure. When the camera function is set to be [ ], the camera will perform one or more delay shooting. When the camera lens focus function is set to be [ M ],the camera will not execute focusing action if half-press the release button of the transmitter. 25 Shooting control Shooting control When the camera lens focus function is set to be [ A ], even receiving the shooting signal the camera will not shoot at the moment as most of camera don't seize focus. Timing plan for shooting 4. Press the set button, save and exit settings. Exposure time setting Delay time setting 1. In the power-on state, move the functional activities icon to the delay timing program icon[ ]by pressing the left move button[ ]or right move button[ ]. 2. Press the set button, enter the delay time for ‘second bit’ setting. 3. By pressing button[ ]or[ ],enter into the setting for “minutes” and “hours”, as the sketch map. The shot number of timing plan setting Press Press Press Press Press Press Press Press Delay time of timing plan--hours setting 26 Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly increased; Press the button[ ]once to set the numerical reduced, hold on to set the values rapidly reduced. Delay time of timing plan--minutes setting Delay time of timing plan--seconds setting Exposu -re time of timing plan setting 1. Press left move button[ ]or right move button[ ], move the transmitter’s activities icon to the exposure timing program icon[ ]. 2. Press the set button, enter the delay time for ‘second bit’ setting. 3. By pressing button[ ]or[ ],enter into the setting for “minutes” and “hours”, as the sketch map. Delay time of timing plan setting Press Press Press Press Press Press Press Press Exposure time of timing plan--hours setting Exposure time of timing plan--minutes setting Interval time of timing plan setting Exposure time of timing plan--seconds setting 27 Shooting control Shooting control Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly increased; Press the button[ ]once to set the numerical reduced, hold on to set the values rapidly reduced. 4. Press the set button, save and exit settings. 4. Press the set button, save and exit settings. Interval time setting The shot number setting 1. Press left move button[ ]or right move button[ ], move the transmitter’s activities icon to the interval timing program icon[ ]. 2. Press the set button, enter the interval time for “second bit” setting. 3. By pressing button[ ]or[ ],enter into the setting for “minutes” and “hours”, as the sketch map. Exposu -re time of timing plan setting Press Press Press Press Press Press Press Press Interval time of timing plan--hours setting 28 Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly increased; Press the button[ ]once to set the numerical reduced, hold on to set the values rapidly reduced. Interval time of timing plan--minutes setting The shot number of timing plan setting 1. Press left move button[ ]or right move button[ ], move the transmitter’s activities icon to the icon of timing shots [ ]. 2. Press the set button, entering to set the number plan of shot. Press button[ ]setting shot number can be increased, press button [ ], settings shot number can be decreased. It can be set between 1 to 99 sheets. 3. By pressing button[ ]or[ ],enter into the setting for “ delay time” and “exposure time”, “interval time” as the shown picture. Interval time of timing plan--second setting 29 Shooting control Shooting control Interval time of timing plan setting Press Press Press Press 2. Press the timing start/stop button[ ], the transmitter will sent all information to the receiver. The timing plan will run in the receiver, and output control signals to camera. Delay time of timing plan setting Press the timing plan start/stop button[ ]of the transmitter before the timing plan executing completely, the transmitter and receiver will stop regularly scheduled executing. The transmitter indicator and LCD will run the timing plans, but does not send control commands to the receiver, it’s only offer a reference to understand the operation status of the receiver. 4. Press the set button, save and exit settings. Search the timing plan 1. Press left move button[ ]or right move button[ ],move transmitter’s activities icon to timing plan icon which can check the related timing project. 2. When check the related projects, if need adjust the parameters, only press the set button to enter the relevant project settings, press the set button again to exit and save your setting. Move the icons sequence showed as below. Delay shoot -ing functio n Press Press Press Press Press Press Press Press Press Press Execute timing plan 1. Press the left move button[ ]or right move button[ icon to any icon among the timing plan shooting area. 30 Singl e shoot -i ng func ti on The following examples illustrate the timing plan running: delay time[ ]=5 seconds, exposure time[ ] = 1 second, shooting interval[ ]= 6 seconds, shooting number[ ] = 3. Focusing output Shooting output ], move the activities 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 31 PIXEL TW-282 Specification Type : FSK 2.4 GHz wireless control system Transmission distance: 80 meters or above Channel: 99 channels, as well as ALL Standby time: Transmitter : more than 4 years(using two 1.5V AAA batteries) Receiver : 400 hours (using CR-2 lithium battery) Dimensions (W ×H ×D) : Transmitter: 149mm×49.5mm×24mm Weight ( with ba ttery)： 63mm×38mm×31mm Receiver: Transmitte: 70.5 g 39.5 g Receiver: Now you can start to use unique high-performance PIXEL product TW-282. If you have any questions, you can contact the local distributor. Or visit the website http://www.pixelhk.com. 32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 18 Create Date : D:20110106073504 Modify Date : D:20110106073504 Producer : Corel PDF Engine Version 3.0.0.667 Author : nacy Creator : CorelDRAW Title : TW-282English.cdrEXIF Metadata provided by EXIF.tools