Planex Communications BT-06HS-C Bluetooth headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1254972
Application ID	kVkLnBW4VCDUPMd+nYKlAg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.12kB (351520 bits)
Date Submitted	2010-03-21 00:00:00
Date Available	2010-03-21 00:00:00
Creation Date	2010-03-08 10:18:20
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	0000-00-00 00:00:00
Document Title	BT-06HS-C TELEC DOC 申請書面資料 .cdr
Document Creator	CorelDRAW 版本 12.0
Document Author:	user

10. Answer a call.
BT-06HS-C
- Stand-by mode------blue light flash once every 5 Sec.
- Connected mode---blue light flash two times every 5 Sec.
- Active call mode----blue light flash three times every 5 Sec.
Bluetooth Headset
User Manual
Cap the ear tip
-----
Click
Ringing.....
Parallel
Click
- low battery----red light flash.
Model: BT-06HS-C
FCC ID. : SJ9-BT-06HS-C
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONS IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
( 1 ) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
( 2 ) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFEERENCE THAT MAY UNDESIRED OPERATION.
3 Sec
Made in Taiwan Brand Name:PCI
Press the MFB key for about
3 Sec, to turn on and turn off.
9. End a call.
6. How to wear it firmly
Inserted
completely
X Inserted
Incompletely
Specification of the Headset
Bluetooth Standard
Talktime
Standby time
Charging time
Operation range
Supported Bluetooth profiles
Operating temperature range
Storage temperature
Power Supply
Bluetooth V2.1
Over 5 hrs.
Over 120hrs.
Within 90 ~120Mins.
10 meters(open space)
Handsfree / Headset .
0 ~ 55 'C
0% ~ 90% (non-concrete status)
5V DC, 00~240V AC adapter
When you have a incoming call click
the MFB key after you hear the ring
from the headset.
The salient insert
in the little hole
3. Turn on/ Turn off
-----
Click
When you finish a call; click the
MFB key to end the call.
Power on - blue light flashing.
Power off - red light flashing then off.
The ear tip must insert to ear bone completely.
11. Voice dialing
4. Pairing with your mobile phone
It need to pair with your Bluetooth device, first time.
Click
left ear
1.Before pairing, make sure your
headset is off.
2.Press the MFB key for at least
5 sec; the blue and red light
flashing alternately it means the
headset is in the “pairing mode".
3.Please ensure that your mobile
phone is provided the Bluetooth
Function, and activate the function.
1. Charging the Headset
Charging Plug
right ear
If you can't wear it firmly, use the ear hook as assist
2.This function depends on the
specification of your mobile phone.
12. Redial last number
Double-Click
Red
blue
The pairing
distance
Devices found
BT-06HS-C
10cm~1m
2. Introduction of the product
2.This function depends on the
specification of your mobile phone.
4. "BT-06HS-C” will show on certain items in your mobile phone.
5. Key in pairing pin code "0000”press " yes" , the indicator
light will turn from the blue/red flashing status into blue
flashing, it means the pairing has been successful.
6.Now the headset has been in the "connected mode".
you may receive or dial the phone call.
microphone toward jaw
13. Volume control.
To make a call, dial through your mobile phone.
Press / Click
Press and hold continuously.
Click continually.
LED light indicator
8. Reject a call.
You can adjust the headset volume
during a call.
5. How to wear the headset
Charging Port
-----
Press 2 Sec
-----
Ringing.....
Choose the ear plug size
Mute & un-mute
Hook point
2 Sec
Ear plug
Choose the ear tip size
large one on headset already
Microphone
Speaker
1.The headset should be under
"Connected mode". By double-click
the MFB key, after you hear a " DoDo " sound from the headset, then it
will redial again.
-----
1. At least for 4 hours when first time charging,
2. When charging, the red light on; fully charged the light
will be off.
Ear tip
1.The headset should be under
"Connected mode", click the MFB
key; then you can make the " Voice
dialing " by the mobile phone's
operation instruction..
7. Make a call.
USB
Port
Volume key
-----
Click
5 Sec
MFB key
-----
When you hear the in-coming
call rings from your headset;
press the MFB key for 2 Sec,
when you hear the " Do Do"
sound than release it. ------Reject a call.
Click
1.When during call press the “ MFB &
Vol key” Simultaneously, you will hear
a “ Do-lu-do-do" sound, then your
voice won't be heard.
2.Click the Vol key again, to un-mute
the microphone.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.536
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : user
Title                           : BT-06HS-C TELEC DOC 申請書面資料 .cdr
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2010:03:15 09:42:32+08:00
Metadata Date                   : 2010:03:15 09:42:32+08:00
Document ID                     : uuid:d5790958-5bcc-4c0f-afc7-bb7c64fffb20
Instance ID                     : uuid:c531bfbd-93e4-4f4d-abf2-e67f98062127
Has XFA                         : No
Page Count                      : 2
Create Date                     : D:20100308101820
Author                          : user

EXIF Metadata provided by EXIF.tools