Plantronics BT300 Class 2 Bluetooth USB Dongle User Manual 2 of 2

Plantronics Inc Class 2 Bluetooth USB Dongle 2 of 2

Contents

User manual 2 of 2

B230-MQUICKSTART3 EASY STEPSSET UP, CONNECT, CALLQUICK START GUIDEGUIDE DE DÉMARRAGE RAPIDEGUÍA DE INICIO RÁPIDO GUIA DE INÍCIO RÁPIDOplantronics.com/supportBLUETOOTH WIRELESS HEADSET SYSTEM
enenMicro USB ChargerBT300-M USB AdapterVoyager PRO UC v2USB Charging CableSoftware and User Guide CDSoft Gel Eartips (Small & Large) and Foam Eartip CoversCarry CaseWhat’s in the box
enenStep 1 Set up your headset and computerInstall the software To use all the features of your system, install the Plantronics software from the CD included or download it at plantronics.com/software. Once the software is installed, Windows users can access the utility by selecting Start > Programs > Plantronics > Plantronics Control Panel.Charge your headestTo calibrate your headset and provide optimal performance fully charge the headset before using. Connect the AC charger to an outlet and the headset. The headset LED will be solid red to indicate that the headset battery is charging. When fully charged the LED goes off.Note To charge the headset with USB charging cable the PC must be on and in an active state. Charge times using the USB cable will be longer. Try on your headsetThe headset comes configured for the right ear, with the medium eartip installed, however you can replace it with the small or large eartip provided. For the best sound clarity and comfort, make sure you have a secure fit.Replace the eartip for a better fitGrip the eartip and gently push it into the speaker housing.1 Rotate it a quarter turn to the left to unlock. 2 Pull the eartip away from the headset.3 213Headset features345121 Volume/Mute buttonIncrease/decrease volumeMute during a callMusic or audio: pause/playTap + or – buttons per level change 1-second press of both + and – buttons1-second press of both + and – buttons2 Call buttonTake a call or end itCall Back/Redial Initiate phone’s voice-dialingReconnect lost connection1 tap2 taps2-second press until tone heard1 tap3 Micro USB charging port With the AC charger, a full charge takes 90 minutes. 4 Power buttonOn or offBattery level voice alertsActivate pairing mode2-second press1 tapPress until LED flashes red/blue5 LEDChargingBattery statusPairing mode Solid red. When fully charged, LED is off. Low = 2 red flashes, Critically low = 3 red flashesFlashes red/blue
enenAttach a new eartipAlign the tabs on the eartip with the slots on the speaker housing.4 Gently push the eartip into housing while turning it a quarter turn to the 5 right. The eartip will stop rotating when it is locked. You may want to add a foam eartip cover for additional comfort.445Wearing the headsetGuide the earloop behind your ear and position the headset so that the 1 speaker and eartip rest comfortably in your ear.Pivot the boom up to point the microphone toward the corner of your mouth.2 12Quick-turn adjustment for the left earPivot the boom into an upright position.1 Rotate the boom and speaker to the other side of the headset and lower it 2 before fitting your other ear.21Step 2 Connect (Pair) your headset to your mobile phoneVoyagerPRO UC v2  Ready1 Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/discover new Bluetooth devices.BlackBerry® Settings/options > Bluetooth: On > Search for devices.iPhone Settings > General > Bluetooth > On (starts the search for devices)Android Phone Settings > Wireless > Bluetooth: On > Scan for devicesSet2 To activate Bluetooth pairing mode, press and hold the power button until LED flashes red/blue to indicate pairing mode.Connect3 Select • VoyagerPRO UC v2 from the list of Bluetooth devices shown on your phone.If phone asks for a passcode, enter four zeros • 0000. You may see **** on screen.Some phones also ask to confirm headset connection after pairing.•Headset LED will stop flashing red/blue once your phone and headset are •successfully paired/connected.
enenStep 3 Call Making calls with Microsoft Office CommunicatorYou can make Microsoft Office Communicator calls with your computer using your Bluetooth adapter which comes automatically paired with your headset. Ensure the headset is powered on. 1 Ensure Microsoft Office Communicator is running on your PC.2 Insert the USB adapter into USB Port on the PC. The LED on the adapter will 3 flash blue to indicate the adapter is connecting to the headset. The LED will become solid blue to indicate the adapter is powered on and is connected to the headset. Set the headset and microphone volume to a comfortable level using the 4 Microsoft Office Communicator “Set up Audio and Video” page.*. Place a call using Microsoft Office Communicator. The audio connection to 5 your headset will activate automatically when your recipient’s phone begins to ring. The LED on the adapter will slowly flash blue while you are on an active call. * Consult Microsoft Office Communicator Help for more information.Learn More To learn more about your system features, change default settings or read troubleshooting tips, refer to the user guide on the CD or online at plantronics.com/documentation. You can also view online FAQ at plantronics.com/support. Technical support is available at 1.800.544.4660.Advanced FeaturesAuto Answer:When you are not wearing your headset.When you have an incoming call on your mobile or softphone, simply put on the headset and the call will be answered automatically. You do not have to press the call button.Auto Pause:When you are listening to streaming audio.When you are steaming audio from your mobile phone or PC. Simply remove the headset and the streaming audio pauses. Place your headset back on and the streaming audio resumes. Auto Transfer:Whether you are wearing your headset or not.If you are not wearing your headset and there is an incoming call, the audio will be routed to the mobile phone. When you place the headset on your head, the audio will be routed back to the headset and will Auto Answer. In the case where the headset is already being worn, the audio will be in the headset and you will need to press the Call Button to answer the call.Auto Lock:When you are not wearing your headsetThis feature locks out the call button to prevent an accidental call when the headset is not worn.
Plantronics, Inc.345 Encinal StreetSanta Cruz, CA 95060United StatesTel: 800-544-4660plantronics.com© 2010 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Voyager, QuickPair, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.Patents US 5,210,791; Patents Pending84592-04 (09.10)

Navigation menu