Plantronics D200A Wireless DECT USB Type A adapter User Manual Quick start manual

Plantronics Inc Wireless DECT USB Type A adapter Quick start manual

Contents

Quick start manual

Designed in Santa Cruz, CaliforniaQUICK STARTSavi 3210/3220This version of the wordmark can only be used at this size. It has a larger registration mark than the other size wordmarks.Please use one of the other sizes if you need a larger version.ENCHARGE YOUR HEADSETCharge your headset for a minimum of 20 minutes by placing it in the base. The cradle LED flashes green when charging. HOOK UP YOUR SYSTEMUsing the diagram, connect the headset system.DOWNLOAD SOFTWAREPlantronics Hub software is required for softphone call control. It also provides you with an easy way to change device and software settings and install software and firmware updatesDownload Plantronics Hub for Windows or Mac at plantronics.com/software.HOW TOMake/take/end a call Tap call button or use softphone interface.CALL CONTROL TIP Headset call control for the computer requires Plantronics software and softphone compatibility. See “Download software.”Select headset languageThe default headset voice prompt language is English.To change the headset language, download and open Plantronics Hub for Windows/Mac at plantronics.com/software and go to Settings > Language. © 2017 Plantronics, Inc. All trademarks are the property of their respective owners. Patents pending.XXXXXX-XX 00.00 Savi 3210/3220 has a D200 USB-A/D200 USB-C (may be followed by /A or /S) DECT adapter, a W8210T/W8220T (may be followed by /A or /S) headset and a XXXX base. plantronics.com/setup/savi3200not active for testingQUICK STARTSavi 8210/8220Designed in Santa Cruz, CaliforniaANC Active Noise Canceling© 2017 Plantronics, Inc.123456- 10.17The Savi XXX consists of a XXX base and a XX headset.plantronics.com/setup/savi-8200ENGLISHHOOK UP YOUR SYSTEMUsing the diagram, connect your headset system.PAIR YOUR HEADSET1Press and hold the Bluetooth pairing button on the baseuntil the Bluetooth LED flashes red and blue.2Go to Bluetooth settings on your mobile phone andselect PLT Savi. Once successfully paired, the BluetoothLED on the base turns solid white.DOWNLOAD SOFTWAREPlantronics Hub software is required for softphone callcontrol. It also provides you with an easy way to changedevice and software settings and install software andfirmware updatesDownload Plantronics Hub for Windows or Mac atplantronics.com/software.HOW TOOn the top of the base there are three Audio buttons:computer, mobile, desk phone. These buttons allow youto switch to a different phone line/audio channel.Make a call1Tap an Audio button on the base.2Deskphone only: Manually remove the handset if youdon't have an HL10 lifter or EHS cable. You should hear adial tone.TIP If you do not hear a dial tone, open the base side panel andadjust the middle switch (A--G). “A” works for the majority of deskphones.3Dial from your softphone/mobile phone/desk phone.End/take a callTap the Audio button on the base or tap theheadset call button.TIP Headset call control for the computer requires Plantronicssoftware and softphone compatibility. See “Download software.”not available for testing CHARGE YOUR HEADSETCharge your headset for a minimum of 20 minutes by placing it in the base. The cradle LED flashes green when charging.

Navigation menu