Plantronics D640 Bluetooth Headset User Manual Discovery UG indd
Plantronics Inc Bluetooth Headset Discovery UG indd
Exhibit 8 User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 554463 |
| Application ID | OeQqmzrhGG7ZiIi0q5L/HA== |
| Document Description | Exhibit 8 User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.66kB (820757 bits) |
| Date Submitted | 2005-06-22 00:00:00 |
| Date Available | 2005-06-22 00:00:00 |
| Creation Date | 2005-04-25 09:26:12 |
| Producing Software | Adobe PDF Library 6.0 |
| Document Lastmod | 2005-05-11 07:32:56 |
| Document Title | Discovery_UG.indd |
| Document Creator | Adobe InDesign CS (3.0) |
Plantronics Inc 345 Encinal Street Santa Cruz, CA 95060 USA Tel: (800) 544-4660 www.plantronics.com PLANTRONICS DISCOVERY 640 BLUETOOTH® HEADSET TM User Guide ©2005 Plantronics, Inc. All rights reserved. Plantronics, the logo design, and Plantronics and the logo design combined and Plantronics Discovery are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Plantronics, Inc. under license. All other trademarks are the property of their respective owners. Printed in USA 69327-01 (05-05) WELCOME This User Guide provides instructions on the setup and usage of the Plantronics Discovery 640 Bluetooth® Headset. TM CONNECTING THE COMPONENTS Before getting started, please review the Safety Booklet included in your package. For additional help, service, or support information, refer to your product Warranty card or visit www.plantronics.com. COMPONENTS OF THE PLANTRONICS DISCOVERY 640 BLUETOOTH® HEADSET The Battery Charger and Charging Adapter connect to the Headset Carrying Pocket by pushing the two components together. Be sure that the indent on the attachment lines up with the shirt clip on the Headset Carrying Pocket. “SNAP” �������� �������������� ��������������� ��������� CAUTION: Do not twist components. CHARGING YOUR HEADSET ������������� ��������������� The Plantronics Discovery 640 Headset must be charged for a minimum of 1 hour prior to use, up to 3 hours to fully charged. ����� ������������ ������ ������ An AC Power Adapter is included. You may also charge the Headset using the AC Power Adapter for your cellular phone with the appropriate Charging Adapter or using a AAA battery. ����� ������� ����� �������� �������� ���������� The Headset Status Indicator glows red during charging and turns off when fully charged. ���� �������� ������� �������� ������ �������� ������� Using the Included AC Power Adapter ����� ������� ���� �������� ������������ ������� �������� �������� �������� ������ �������� ����� To separate the components, grasp both the Headset Carrying Pocket and attachment with the shirt clip facing you. Bend the outsides back and the components will snap apart. ��������� �������� ���������������� � ��������������������������������������������������� ����������������������������������������������������������� �������������������������������������������������������� �������� ��������������������������������������������������� 1. Plug the AC Power Adapter into the base of the Headset Carrying Pocket and connect it to your power source. 2.Insert the Headset into the Headset Carrying Pocket. Using the AC Adapter from your Cellular Phone 1. Select the appropriate Charging Adapter for your phone and connect the Charging Adapter to the base of the Headset Carrying Pocket. 2.Plug the AC Power Adapter for your phone into the Charging Adapter and connect the AC Power Adapter to your power source. 3.Insert the Headset into the Headset Carrying Pocket. 4 Using the AAA Battery PAIRING (LINKING) WITH YOUR CELLULAR PHONE One battery will operate the Headset for up to 15 hours of talk time. 1. Twist the bottom of the Battery Charger counter clockwise and release the Battery Holder. 2.Insert the Battery into the Battery Holder. 3.Slide the Battery Holder back into the Battery Charger and turn clockwise. 4.Snap Battery Charger to Headset Carrying Pocket. 5.Insert the Headset into the Headset Carrying Pocket. Before using your Headset for the first time with your Bluetooth cellular phone or device, you must activate the link between the Headset and the cellular phone. Make sure the Headset is fully charged. • Look in your Bluetooth device manual for the section that describes how to set up a Bluetooth wireless connection. • Move through the menu selections on your phone until the phone display shows “Look for Devices” or equivalent, as a selection. 1. With your Headset turned off, hold down the Call Control Button until the Headset Status Indicator just TURNING THE HEADSET ON AND OFF 1. Turn on the Headset by pressing and holding the Call Control Button until the Headset Status Indicator glows blue. If you are wearing the Headset, you will hear a beep when the power turns on. The Headset Status Indicator will flash blue every 6 seconds when the Headset power is on. NOTE: When the Headset is turned on, the Headset Status Indicator will indicate the charge level of the Headset. Greater than 2/3 battery charge = 3 flashes red 1/3 to 2/3 battery charge = 2 flashes red Less than 1/3 battery charge = 1 flash red ”BEEP” 2.Turn off the Headset by pressing the Call Control Button for 6-8 seconds until the Headset Status Indicator glows red or until you hear the beep. The Headset Staus Indicator remains unlit when the power is off. glows blue, then flashes red and blue. The Headset is now in discovery mode and will stay that way for 30 seconds. 2.On your phone, highlight and select “Look for Devices” or equivalent, to activate the scan for the Headset. 3.When the phone display shows the scan results, select “640 Plantronics”. The phone will continue to search for the Headset. 4.When the phone display asks for a passkey, type “0000” and press enter. Your Headset is now linked to your phone. � � � ���� ��� ������ ���� ����������� � ������ To link or pair to multiple Bluetooth devices, repeat the steps above. USING MULTIPOINT (MORE THAN ONE BLUETOOTH DEVICE) Plantronics Discovery 640 supports Multipoint technology, which permits simultaneous connections with two different Bluetooth audio devices. To pair another Bluetooth device: repeat the steps above. Initiate a call: The headset will assume you wish to initiate a call on the device recently used. To use the second device, initiate the call using the controls on the second device. The second device will form the link with the headset. Answer a call: An incoming call on either device will ring through the headset. In most cases, the ring tone from the device will transfer through to the headset, allowing the user to determine which device is ringing. In some cases, however, the headset will apply a ring tone to the incoming call. In either case, the user may be able to determine which device is ringing through the distinct ring tone. To answer the call, press the Call Control Button. Answer a call on one device while talking on the other: There is no capability to place one call on hold 6 USING MULTIPOINT CONTINUED while answering another. Therefore, to answer the second call, the first call must be terminated. Terminate the first call by pressing the call control button once. Wait for the beep and then answer the second call by pressing the call control button again. If you choose not to answer the second call, and you have voice mail on the second device, the call will go into voice mail. ANSWERING AND ENDING CALLS 1. To answer a call, apply a quick press to the Call Control Button or the Volume/ Mute Button. 2.To end a call, apply a quick press to the Call Control Button. If the Headset is in the Headset Carrying Pocket when a call is received, the Carrying Pocket will vibrate. Removing the Headset from the pocket will answer the call. FITTING YOUR HEADSET Returning the Headset to the Headset Carrying Pocket will end the call. ��������� ADJUSTING THE VOLUME To increase the listening volume of the Headset, press the upper end (+) of the Volume/Mute Button. ����������������� To decrease the listening volume, press the lower end (-). �������� The Headset comes with 3 Soft Gel Ear Tips and an Optional Ear Stabilizer. The medium size Ear Tip is installed for wearing on right ear. 1. Twist the Ear Tip to the right for left ear-wearing. 2.Place the Headset into your ear with the elongated side of the Ear Tip pointing up and forward. If the fit is not comfortable, either too tight or too loose, remove the Ear Tip from the Headset by turning the Ear Tip to the neutral* position and pulling the Ear Tip away from the Headset. 1. Select the Ear Tip Size that fits more comfortably in your ear. 2. Hold the Ear Tip with the elongated edge pointing down and push the Ear Tip post into the opening on the Headset. 3. Twist the Ear Tip to the left for right ear-wearing or to the right for left ear-wearing. 4. Place the Headset into your ear with the elongated side of the Ear Tip pointing up and forward. USING OPTIONAL EAR STABILIZER The Ear Tip Stabilizer may be attached to the Headset to improve stability. 1.Remove the Ear Tip from the Headset by turning ear tip to neutal position* and pulling ear tip away from Headset. 2. Attach the Stabilizer in between the ear tip and the Headset. 3. Replace the Ear Tip. USING THE MUTE To turn the mute on while on a call, press both sides of the Volume/Mute Button simultaneously until you hear a beep. To turn the mute off, press both buttons again. MOVING OUT OF RANGE As the Headset is moved away from the cellular phone or Bluetooth device, • Audio quality will degrade • A beep will be heard in the Headset, • Only the power off function will operate After 30 seconds, the Headset will attempt one time to reconnect to the phone or device. TROUBLESHOOTING USING VOICE RECOGNITION My Headset does not work with my phone. To use voice recognition, the voice recognition feature must be enabled on your device. See your Bluetooth device manual for instructions. With the Headset on, one long press of the Call Control Button will activate the voice recognition feature on the Headset. POSSIBLE CAUSE SOLUTION Headset was not in discovery mode when cellular phone menu selections were made. See page 5 “Pairing with Your Cell Phone” Incorrect menu selections were made on your cellular phone. See page 5 “Pairing with Your Cell Phone” MULTIPLE USES OF A LONG PRESS OF THE CALL CONTROL BUTTON Headset Function State of the Bluetooth Device Result Turn on power Power off Turns the power on Re-link to Bluetooth device Power on Link dropped Re-links the device Reject call Power on Linked Incoming call Disconnects the call or sends the call to voice mail depending on your device Transfer a call between Headset and Bluetooth device Power on Linked On a call Transfers the call from one device to another Voice recognition Power on Linked No call Activates the voice recognition feature HEADSET STATUS HEADSET STATUS INDICATOR Powering on Blue light appears and flashes every 6 seconds Power on Blue light flashes every 6 seconds Powering off Red light appears and goes off Power off Indicator is not lit Charging battery Red light is on Battery fully charged Red light goes off Discovery state Indicator flashes blue and red for 30 seconds Missed call Infrequent flashing blue /red Press any button to cancel Ringing Rapid flashing blue/red On Line Indicator (OLI) Blue flash every 10 seconds Low battery Flashes red I did not enter my passkey. POSSIBLE CAUSE SOLUTION Your phone did not locate the Headset. Repeat the Pairing process on page 5. Incorrect menu selections were made on your cellular phone. Repeat the Pairing process on page 5. Callers cannot hear me. POSSIBLE CAUSE SOLUTION Mute is turned on. Press both sides of the Volume/Mute Button imultaneously. I cannot hear caller/dial tone. POSSIBLE CAUSE SOLUTION The Headset is not turned on. Press the Call Control Button for 2 seconds until you hear a beep or see the Headset Status Indicator glow blue. Your Headset is out of range. Move the Headset closer to the phone or Bluetooth device. Your Headset battery is dead. Charge your battery using the AC Power Adapter supplied, the AC Adapter from your cellular phone, or a AAA battery. The listening volume is too low. Press the top part of the Volume/Mute Button to increase the sound heard in the Headset. 10 REGULATORY NOTICE FCC REQUIREMENTS Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on another circuit. EXPOSURE TO RADIO FREQUENCY RADIATION The radiated output power of this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used as described in the manual. The internal wireless radio operates within guidelines found in radio frequency safety standards andrecommendations, which reflect the consensus of the scientific community. PRODUCT REGISTRATION REGISTER YOUR PRODUCT ONLINE PLANTRONICS TECHNICAL ASSISTANCE CENTER This is not a condition of your warranty, but will assist us in providing the best possible service and technical support for your product. For Bluetooth assistance and accessibility information, call the Plantronics Technical Assistance Center (TAC) 866-746-4375, or visit our website at www.plantronics.com. Visit www.plantronics.com/ productregistration. ����������� Plantronics therefore believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However, the use of wireless radios may be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio. ���������������� NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment. ������������� ���������� INDUSTRY CANADA NOTICE ��������� ��������������� � ����������������� ������� ����� ������ ����� ������������������ ����������� Radio Equipment The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone.” This product meets the applicable Industry Canada technical specifications of the RSS210. 11 ����������������� ���� ����������� ��������������� �������������������� ������� ������������� ��������������� ������������������ �������������� ������������������ ���������������� ������������������ ����������������� ������������������ �������������� �������� ������������������ ����������� ������������������ ����������� ������������������ ����������� ������������������ ��������������� ������������������ ������������ �������������� ������������� ����������������� ������������������ ����� To order please contact your Plantronics supplier call 866-746-4375, or go to www.plantronics.com.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2005:05:11 07:32:56-07:00 Create Date : 2005:04:25 09:26:12Z Trapped : False Creator : Adobe InDesign CS (3.0) Producer : Adobe PDF Library 6.0 Page Count : 6 About : uuid:f54ac218-798d-4d82-8c63-b32159714329 Creation Date : 2005:04:25 09:26:12Z Mod Date : 2005:05:11 07:32:56-07:00 Metadata Date : 2005:05:11 07:32:56-07:00 Creator Tool : Adobe InDesign CS (3.0) Rendition Class : proof:pdf Derived From Instance ID : 5a648a76-a1ed-11d9-9360-d9755455fb59 Derived From Document ID : adobe:docid:indd:ee07f3f8-9209-11d9-b354-ebcc50031ebb Document ID : adobe:docid:indd:65341175-b6fe-11d9-b979-def17c7f9947 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:8ba07efa-b5aa-11d9-8f15-000393657f8a, uuid:2edf6584-b5aa-11d9-8f15-000393657f8a, uuid:31c99b49-b5d3-11d9-b57d-000393657f8a, uuid:50d1ad56-b77a-11d9-87a9-000393657f8a, uuid:73eba743-b5b5-11d9-8f15-000393657f8a, uuid:40bc3750-c0dd-11d9-9e5c-000393657f8a, uuid:17d3570a-c0bc-11d9-9e5c-000393657f8a Manifest Reference Document ID : uuid:8ba068cf-b5aa-11d9-8f15-000393657f8a, uuid:2edf5a71-b5aa-11d9-8f15-000393657f8a, uuid:a0a08512-b5d2-11d9-918c-000393657f8a, adobe:docid:photoshop:9429864e-769e-11d9-bb83-98946280f49a, uuid:73eb9aea-b5b5-11d9-8f15-000393657f8a, uuid:697e2b85-756e-11d9-9099-000393ac7d7e, uuid:697e2b85-756e-11d9-9099-000393ac7d7e Format : application/pdf Title : Discovery_UG.indd Tagged PDF : YesEXIF Metadata provided by EXIF.tools