Plantronics P620S Bluetooth Speakerphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1786702
Application ID	z/q0a2MO152eHu1ZcXGPVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	420.68kB (5258497 bits)
Date Submitted	2012-09-10 00:00:00
Date Available	2012-10-01 00:00:00
Creation Date	2012-07-27 15:10:59
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2012-08-27 10:02:25
Document Title	User Manual
Document Creator	Adobe InDesign CS5.5 (7.5)

Calisto 620
Speakerphone
Charge
PC
Connect and Call
Mobile Phone
Connect and Call
Bluetooth Connection
To Re-Pair USB adapter
®
Bluetooth Wireless
Speakerphone + Bluetooth
USB Adapter
Charge of a minimum of 30 minutes needed for complete
setup.
The speakerphone can be charged with a wall charger or with
a USB cord and your PC. The power LED on the speakerphone
will be solid red when charging and off when fully charged.
1 Insert the Bluetooth USB adapter into the PC.
NOTE For best results plug directly into PC and not a hub or
docking station.
The speakerphone and USB adapter are pre-paired and will
connect automatically when USB adapter is connected to the
PC and the speakerphone is powered on and in range of the
PC.
1 Ensure your speakerphone is fully charged. Place the
speakerphone in pairing mode by pressing and holding the
power button to the RIGHT until the Bluetooth pairing LED
flashes RED/BLUE.
NOTE If you don’t see the red and blue flash, slide the power
button all the way LEFT to turn speakerphone off. Then press and
hold the power button again until you see the red and blue flash.
The speakerphone will stay in pairing mode for ten minutes.
Designed in Santa Cruz, California
A full charge with a wall charger will take approximately 1 ½
hours.
2 Slide the power switch on the speakerphone to the “On”
position.
2 Place Bluetooth mobile phone into search mode. Select
Calisto 620 from the list of devices found.
Calisto 620
In the event the USB adapter and speakerphone become
unpaired.
1 Start with the speakerphone powered off.
2 Remove the Bluetooth USB adapter.
3 Place the speakerphone in pairing mode by pressing and
holding the power button to the RIGHT until the Bluetooth
pairing LED flashes BLUE/RED.
4 Insert the Bluetooth USB adapter into your PC USB port. The
LED will flash and then turn solid blue to indicate the
speakerphone is connected to the Bluetooth USB adapter.
5 Speakerphone will exit pairing mode. See the complete user
guide at http://docs.plantronics.com/calisto-620
The speakerphone wireless range is 10m/33feet
NEED MORE HELP?
Product support
QUICK START GUIDE
http://www.plantronics.com/support
Online user guide
The LED on the USB adapter will flash and then turn solid blue
when the speakerphone is connected to the Bluetooth
adapter.
3 Load Plantronics Enterprise software by visiting
plantronics.com/software and click on the download button.
A full charge with a USB cord and your PC will take
approximately 2 ½ hours.
NOTE To charge the speakerphone with the USB cable and PC,
the PC must be on and in an active state (not standby). See the
complete user guide at
http://docs.plantronics.com/calisto-620
Turn speakerphone off when not in use to save battery power.
4 Check your audio settings, as necessary.
Confirm the speaker and microphone settings for your PC
softphone are set to Plantronics BT300C.
3 If prompted by your mobile phone for a passcode enter 0000.
The LED will stop flashing when your speakerphone and
phone are successfully paired.
4 Make a test call from your mobile phone.
5 End the call by pressing the speakerphone call button.
http://docs.plantronics.com/calisto-620
Please refer to the separate safety instructions for important
product safety information prior to installation or use.
Windows 7
Go to Control Panel -> Sound-> Playback tab, and set the
Plantronics BT300C device as both the Default
Communications Device and the Default Audio Device. In the
Playback tab, this is indicated by the green checkmark.
Windows XP
Go to Control Panel -> Sounds and Audio Devices, and in the
Audio tab set the Plantronics BT300C for both the Sound
playback and Sound recording sections. In the Voice tab,
select the Plantronics BT300C item for both the Voice
playback and Voice recording sections.
1 Call button
Answer or end a PC or Mobile call 1 short key press
Answer a 2nd call while on a call 1 short key press ends
1st call, 2nd short key press answers 2nd call
5 Make a test call from your computer softphone. During an
active call, the Bluetooth USB adapter will flash blue.
2 Mute microphone button
Mute mic 1 short key press mutes; Mute LED turns solid
red
Unmute mic 1 short key press unmutes; Mute LED turns
off
Declaration of Conformity
We Plantronics, 345 Encinal Street, Santa Cruz, California, 95060 USA (800) 544-4660, declare under
our sole responsibility that the product BT300M Adapter complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
6 End the call by pressing the speakerphone call button.
Exposure to RF Radiation
The internal wireless radio operates within the guidelines found in radio frequency safety standards
and recommendations, which reflect the consensus of the scientific community. Independent studies
have shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more
information.
In order to comply with FCC and IC RF Exposure requirements, the base must be installed and operated
such that a minimum separation distance of 20 cm is maintained between the base and all persons
during normal operation.
NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to
operate the equipment.
3 Pairing
Flashing red/blue In pairing mode
Solid blue Paired successfully; times out after 10 minutes
4 Volume up, Volume down
Increase/decrease volume Press up/down volume
buttons
Ringer volume Press volume up/down keys while no call
is active
Industry Canada Regulatory Information
This product meets the applicable Industry Canada technical specifications/Le présent materiel est
conforme aux specifications techniques applicable d’ Induristrie Canada.
This Class B digital apparatus complies with Canadian ICES-003. /Cet appareil numérique de la classe
88530--02 (07-12)
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
©2012 Plantronics, Inc. All rights reserved. Plantronics and Calisto are trademarks or registered
trademarks of Plantronics, Inc. The Bluetooth trademark is owned by Bluetooth SIG, Inc. and any use of
the mark by Plantronics, Inc. is under license. Microsoft, Lync, Windows, and Windows XP are registered
trademarks of Microsoft Corporation in the US and other countries.
Calisto 620
Teléfono con altavoz
Cargar
PC
Conecte y llame
celular con Bluetooth
Conecte y llame
®
Bluetooth Wireless
Speakerphone + Bluetooth
USB Adapter
Se requiere una carga de un mínimo de 30 minutos para la
configuración completa.
Se puede cargar el altavoz con un cargador de pared o un
cable USB y su PC. El LED de encendido del altavoz tendrá
una luz roja continua cuando se esté cargando y estará
apagado cuando la carga esté completa.
1 Inserte el adaptador Bluetooth USB en la PC.
NOTA Para obtener mejores resultados, enchufe directamente
en la PC y no en un concentrador o estaciones de conexión.
El altavoz y el adaptador USB están emparejados previamente
y se conectarán de manera automática cuando el adaptador
USB esté conectado a la PC y el altavoz esté encendido y en
rango de la PC.
Designed in Santa Cruz, California
1 Asegúrese de que su altavoz esté completamente cargado.
Coloque el altavoz en modo de emparejamiento al mantener
presionado el botón de encendido a la DERECHA hasta que el
LED de emparejamiento de Bluetooth parpadee en
ROJO/AZUL.
Una carga completa con un cargador de pared tardará
aproximadamente 1 ½ horas.
QUICK
START
GUIDE
GUIA DE
INÍCIO
RÁPIDO
encendido hasta el extremo IZQUIERDO, para apagar el altavoz.
Luego presione y mantenga presionado el botón de encendido
nuevamente hasta que vea un parpadeo rojo y azul.
3 Coloque el altavoz en modo de emparejamiento al mantener
presionado el botón de encendido a la DERECHA hasta que el
LED de emparejamiento de Bluetooth parpadee en
AZUL/ROJO.
2 Coloque el teléfono móvil Bluetooth en el modo búsqueda.
Seleccione Calisto 620 de la lista de dispositivos
encontrados.
Calisto 620
Una carga completa con un cable USB y su PC tardará
aproximadamente 2 ½ horas.
NOTA Para cargar el altavoz con el cable USB y la PC, esta debe
estar encendida y en estado activo (no en espera). Consulte la
guía completa del usuario en
http://docs.plantronics.com/calisto-620
Apague el altavoz cuando no esté en uso para ahorrar energía.
4 Revise su configuración de audio según sea necesario.
Confirme que los ajustes de la bocina y el micrófono para su
teléfono de PC estén configurados en Plantronics BT300.
Windows 7
Vaya a Panel de control -> Sonido-> Reproducción y configure
el dispositivo Plantronics BT300 como Dispositivo de
comunicaciones predeterminado y Dispositivo de audio
predeterminado. En la ficha Reproducción, esto se indica con
una marca de verificación verde.
1 Empiece con el altavoz apagado.
2 Extraiga el adaptador USB Bluetooth.
El LED del adaptador USB parpadeará y luego se volverá de un
azul sin parpadear cuando el altavoz esté conectado al
adaptador Bluetooth.
3 Para cargar el software de Plantronics visite
plantronics.com/software y haga clic en el botón de descarga.
En caso de que el adaptador USB y el altavoz dejen de estar
emparejados.
NOTA Si no ve el parpadeo rojo y azul, deslice el botón de
El altavoz permanecerá en modo de emparejamiento durante
diez minutos.
2 Deslice el interruptor de encendido del altavoz a la posición
“Encendido”.
Conexión Bluetooth
Volver a emparejar a través de
adaptador USB
4 Inserte el adaptador USB Bluetooth directamente en el
puerto USB de la PC. La luz LED parpadeará y luego se
mantendrá de color azul sin parpadear para indicar que el
auricular está conectado al adaptador USB Bluetooth.
5 El altavoz saldrá del modo de emparejamiento. Consulte la
guía completa del usuario en
http://docs.plantronics.com/calisto-620
El alcance inalámbrico del altavoz es de 10 m / 33 pies
¿NECESITA MÁS AYUDA?
Asistencia para productos
http://www.plantronics.com/support
3 Si su teléfono celular le solicita ingresar una contraseña,
ingrese 0000. La luz LED dejará de parpadear cuando el
altavoz y el teléfono se hayan emparejado correctamente.
Guía del usuario en línea
http://docs.plantronics.com/calisto-620
4 Haga una llamada de prueba desde su teléfono celular.
5 Finalice la llamada presionando el botón de llamada.
Antes de instalar o utilizar el producto, consulte el folleto de
instrucciones de seguridad (aparte) para obtener información
importante acerca de la seguridad del producto.
Windows XP
1 Botón de llamada
Contestar o finalizar una llamada de PC o teléfono celular
1 pulsación breve
Responda una 2da llamada mientras transcurre la llamada
1 pulsación breve finaliza la 1era llamada, la 2da pulsación
breve contesta la 2da llamada
Vaya a Panel de control -> Sonidos y dispositivos de audio, y
en la ficha Audio configure Plantronics BT300 para
Reproducción de sonido y Grabación de sonido. En la ficha
Voz, seleccione el elemento Plantronics BT300 para las
secciones de Reproducción de voz y Grabación de voz.
5 Haga una llamada de prueba desde su teléfono de PC.
Durante una llamada activa, el adaptador USB Bluetooth
parpadeará en color azul.
6 Finalice la llamada presionando el botón de llamada.
2 Botón Silencio del micrófono
Silenciar micrófono 1 pulsación breve silencia, el LED de
silenciar se vuelve rojo sin parpadeo
Quitar silencio al micrófono 1 pulsación breve quita el
silencio, el LED de silenciar se apaga
3 Emparejamiento
Parpadeo rojo/azul En modo emparejamiento
Azul sin parpadeo Emparejado exitoso, expira después de
10 minutos
4 Subir y bajar el volumen
Aumentar/disminuir el volumen Presionar botones para
subir/bajar el volumen
Volumen del timbre Presionar teclas para subir/bajar el
volumen mientras no hay llamadas activas
88530-00
Nota a los usuarios:Callisto 620 contiene un altavoz inalámbrico Bluetooth modelo P620S y un dispositivo Bluetooth USB
modelo BT300.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2012:07:27 15:10:59-07:00
Creator                         : Adobe InDesign CS5.5 (7.5)
Modify Date                     : 2012:08:27 10:02:25-07:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Instance ID                     : uuid:91e93ce6-6a54-49d9-90ac-5171101a9a97
Original Document ID            : adobe:docid:indd:4bbdc868-60f8-11e0-b401-89d3eb3b00c6
Document ID                     : xmp.did:F0C945121A2068118C14DED944E9C99D
Rendition Class                 : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:EBB3E0C70F60E01186F5D1608AEC5F22, xmp.iid:ECB3E0C70F60E01186F5D1608AEC5F22, xmp.iid:C18A69941B60E01186F5D1608AEC5F22, xmp.iid:C28A69941B60E01186F5D1608AEC5F22, xmp.iid:C38A69941B60E01186F5D1608AEC5F22, xmp.iid:80B9D95A2160E01186F5D1608AEC5F22, xmp.iid:EE5FF4127160E011915F87DAD67A6559, xmp.iid:29908CE8182068118C14BBCABA1BC43D, xmp.iid:2A908CE8182068118C14BBCABA1BC43D, xmp.iid:931F2FB0212068118C14BBCABA1BC43D, xmp.iid:01801174072068118C14DED944E9C99D, xmp.iid:08801174072068118C14DED944E9C99D, xmp.iid:169A53F40E2068118C14DED944E9C99D, xmp.iid:179A53F40E2068118C14DED944E9C99D, xmp.iid:4B5AB2290F2068118C14DED944E9C99D, xmp.iid:4E5AB2290F2068118C14DED944E9C99D, xmp.iid:60B7D1F7142068118C14DED944E9C99D, xmp.iid:61B7D1F7142068118C14DED944E9C99D, xmp.iid:64B7D1F7142068118C14DED944E9C99D, xmp.iid:8A238C6B172068118C14DED944E9C99D, xmp.iid:EAC945121A2068118C14DED944E9C99D, xmp.iid:EDC945121A2068118C14DED944E9C99D, xmp.iid:EEC945121A2068118C14DED944E9C99D, xmp.iid:EFC945121A2068118C14DED944E9C99D, xmp.iid:F0C945121A2068118C14DED944E9C99D, xmp.iid:DF48C1E1442168118083DADE975340DE, xmp.iid:E048C1E1442168118083DADE975340DE, xmp.iid:A644831B462168118083DADE975340DE, xmp.iid:107B6357272068118C14DED944E9C99D, xmp.iid:030C3A424B2168118083DADE975340DE, xmp.iid:8C00EA1E292068118C14DED944E9C99D, xmp.iid:9300EA1E292068118C14DED944E9C99D, xmp.iid:EDB7F0592C2068118C14DED944E9C99D, xmp.iid:9108A0D92C2068118C14DED944E9C99D, xmp.iid:449530A8072068118C14CDB444054CF4, xmp.iid:72F908B80B2068118C14CDB444054CF4, xmp.iid:0A801174072068118083B9823C860E85, xmp.iid:C1F41C2A142068118083B9823C860E85, xmp.iid:5B30752D192068118083B9823C860E85, xmp.iid:F6D71AC71B2068118083B9823C860E85, xmp.iid:F7D71AC71B2068118083B9823C860E85, xmp.iid:564512370B20681180839F5EC85BC942, xmp.iid:FE7F117407206811808387352617C853, xmp.iid:148AE472082068118083FC80730D82F8, xmp.iid:1C8AE472082068118083FC80730D82F8, xmp.iid:454247C30820681180839DB920027204, xmp.iid:0880117407206811808399D95C971088, xmp.iid:520ED7430C206811808399D95C971088, xmp.iid:88A029B308206811871FDAEF0C42D367, xmp.iid:89A029B308206811871FDAEF0C42D367
History When                    : 2011:04:05 22:42:41-07:00, 2011:04:05 22:42:41-07:00, 2011:04:06 00:02:12-07:00, 2011:04:06 00:03:16-07:00, 2011:04:06 00:04:31-07:00, 2011:04:06 00:55:14-07:00, 2011:04:06 10:51:12-07:00, 2011:04:28 09:31:56-07:00, 2011:04:28 09:31:56-07:00, 2011:04:28 10:34:47-07:00, 2012:07:19 10:18:25-07:00, 2012:07:19 10:18:25-07:00, 2012:07:19 11:12:07-07:00, 2012:07:19 11:13:36-07:00, 2012:07:19 11:13:36-07:00, 2012:07:19 11:52:03-07:00, 2012:07:19 11:55:10-07:00, 2012:07:19 11:55:47-07:00, 2012:07:19 11:55:47-07:00, 2012:07:19 13:12:27-07:00, 2012:07:19 13:12:27-07:00, 2012:07:19 13:12:48-07:00, 2012:07:19 13:12:48-07:00, 2012:07:19 13:12:58-07:00, 2012:07:19 13:12:58-07:00, 2012:07:19 14:32:37-07:00, 2012:07:19 14:33:19-07:00, 2012:07:19 14:33:50-07:00, 2012:07:19 15:11:53-07:00, 2012:07:19 15:15:33-07:00, 2012:07:19 15:24:37-07:00, 2012:07:19 15:33:26-07:00, 2012:07:19 15:47:45-07:00, 2012:07:19 15:51:19-07:00, 2012:07:20 09:30:48-07:00, 2012:07:20 10:12:08-07:00, 2012:07:20 11:15:42-07:00, 2012:07:20 15:04:16-07:00, 2012:07:20 15:20:02-07:00, 2012:07:20 15:38:39-07:00, 2012:07:20 15:45:19-07:00, 2012:07:20 17:38:33-07:00, 2012:07:23 09:31:55-07:00, 2012:07:23 13:23:10-07:00, 2012:07:23 13:38:08-07:00, 2012:07:25 09:36:12-07:00, 2012:07:26 11:43:38-07:00, 2012:07:26 12:57:44-07:00, 2012:07:27 11:48:17-07:00, 2012:07:27 11:48:17-07:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /, /metadata, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata
Derived From Instance ID        : xmp.iid:EFC945121A2068118C14DED944E9C99D
Derived From Document ID        : xmp.did:64B7D1F7142068118C14DED944E9C99D
Derived From Original Document ID: adobe:docid:indd:4bbdc868-60f8-11e0-b401-89d3eb3b00c6
Derived From Rendition Class    : default
Metadata Date                   : 2012:08:27 10:02:25-07:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 12348 bytes, use -b option to extract), (Binary data 12546 bytes, use -b option to extract)
Doc Change Count                : 209
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 1

EXIF Metadata provided by EXIF.tools