Plantronics WH210 Wireless Communications System Headset User Manual

Plantronics Inc Wireless Communications System Headset Users Manual

Users Manual

Savi™ Office WO200 Professional Wireless Headset System (WO1™ Base + WH210™ Headset) Quick Start GuideGuide de démarrage rapideGuía de inicio rápido Guia de Início Rápido2-12-22-31Quick Start
1Savi WH210 HeadsetSavi WO1 Base1. Listening Volume (also controls mute and switching functions)2. Call Control Button3. Indicator Light 4. Noise-Canceling Boom5. Ear tips6. Charge Cradle642351. Desk Phone Speaking Volume2. Configuration Switch 3. Desk Phone Listening Volume 4. Subscription Button and Indicator Light5. Power/Charging Indicator Light 6. Power Jack7. Handset Lifter Jack 8. Telephone Interface Cable Jack 9. USB Port 10. Desk Phone Talk Button and Indicator Light 11. PC Talk Button and Indicator Light Base Power SupplyTelephone Interface CableCD includes: • PerSono® Suite Software • Animated Setup Guide • Complete User GuideUSB Cable106781193-13-247-1 7-25-75-26-65-26-55-26-45-642315WelcomeCongratulations on purchasing your new Plantronics product. This Quick Start Guide contains instructions for setting up the Savi Office WO200 Professional Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.System RequirementsThe minimum system requirements for Savi Office are as follows:• Supported Operating Systems: Windows XP, Windows Vista • Processor: 400 MHz Pentium processor or equivalent (Minimum); 1GHz Pentium processor or equivalent (Recommended) • RAM: 96 MB (Minimum); 256 MB (Recommended) • Hard Disk: 280 MB (Minimum); 500 MB (Recommended) • Display: 800 x 600, 256 colours (Minimum); 1024 x 768 high colour, 32-bit (Recommended) • Internet Explorer V6 or better must be on the user’s system (Required) Safety Instructions Do not use headphones / headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.We highly recommend that you refer to the CD for Animated Set Up instructions and the complete User Guide.
Setting Up the Savi Office WO200 System1. Attaching Charge Cradle to BaseConnect the headset charge cradle to the base. Push firmly on the cradle until the cradle snaps into place.2. Connecting Base to Desk Phone2-1. Connect the telephone interface cable to the telephone interface cable jack on the base.2-2. After disconnecting the handset coil cord from the desk phone, connect the telephone interface cable to the now open handset port on the desk phone.2-3. Connect the handset coil cord to the telephone interface cable junction box.3. Connecting Power Supply to Base3-1. Connect the base power supply into the power jack on the base. 3-2. Connect the power supply to outlet. 4. Docking and Charging Headset Gently push the headset into the charge cradle. Charge for at least 20 minutes prior to the rst use. A full charge takes 3 hours. 5. Checking Configuration5-1. Set volume on desk phone to mid-range.5-2. On the base, ensure the conguration switch is set to “A” and the desk phone speaking volume and desk phone listening volume are both set to 3.NOTE For most phones, these factory default settings will sound the best.5-3. With your headset on, press the call control button on headset.5-4. Remove the handset from desk phone cradle.5-5. Listen for a dial tone. If the dial tone sounds clear, press the call control button on headset and continue with Step 6. Making a Test Call with Desk Phone.5-6. If the dial tone is too loud or too soft, adjust the headset volume level.5-7. If the dial tone still does not sound clear, adjust the conguration switch until the dial tone sounds the best. NOTE Multiple settings might work with your phone; however, only one is the optimal position.5-8. Press the call control button on the headset and return the handset to the cradle to complete configuration.6. Making a Test Call with Desk Phone6-1. With your headset on, press the call control button on headset.6-2. Remove the handset from desk phone cradle.6-3. Dial the number using your desk phone. 6-4. If needed, adjust the listening volume on the headset.6-5. If the listening volume is still too loud or too soft, adjust the desk phone listening volume on the base.6-6. If the speaking volume is too loud or too soft for your listener, adjust the desk phone speaking volume on the base.6-7. Press the call control button on the headset and return the handset to the cradle to complete the test call.7. Connecting to the PC7-1. Connect the USB cable to the USB port on the back of the base.7-2. Connect the other end of the USB cable to the USB port on the PC.7-3. Insert the CD and install the PerSono Suite software. Follow the installation instructions shown on your PC.8. Making a Test Call with PC8-1. Ensure the PerSono Suite software is running on your PC.8-2. With your headset on, press the PC talk button on the base.8-3. Dial the number using your softphone application.8-4. Adjust listening and speaking volume using your softphone application and/or “sound and audio devices” in your PC control panel.8-5. You can fine tune the listening volume on the headset.8-6. To end the test call, press the call control button on the headset.Please refer to the complete User Guide located on the CD for further details on how to use your Savi Office WO200 Professional Wireless Headset System.CHARGING TIME20 min ..................... Minimum charge before first use3 hours ................... Full charge
1Micro-casque Savi WH210Base Savi WO11. Volume (contrôle aussi les fonctions de sourdine et de commutation)2. Bouton de contrôle des appels3. Voyant 4. Microphone éliminateur de bruit5. Embouts6. Chargeur642351. Volume d’émission du téléphone2. Commutateur de configuration 3. Volume de réception du téléphone 4. Bouton d’association et voyant5. Voyant d’alimentation/charge 6. Prise d’alimentation7. Prise du décrocheur de combiné 8. Prise de câble d’interface téléphonique 9. Port USB10. Bouton de conversation par téléphone et voyant11. Bouton de conversation par ordinateur et voyantBloc d’alimentation de la baseCâble d’interface téléphoniqueContenu du CD : • Logiciel PerSono®• Guide de conguration animé• Guide de l’utilisateur completCâble USB10678119BienvenueFélicitations pour votre nouveau produit Plantronics. Ce guide explique comment installer le système de micro-casque sans fil professionnel Savi Office WO200. système de micro-casque sans l professionnel Savi Ofce WO100. Veuillez lire les consignes de sécurité fournies séparément avant d’installer ou d’utiliser le produit. Elles contiennent des renseignements importants relatifs à la sécurité.Configuration système requiseLa configuration système requise pour Savi Office est la suivante :• Systèmes d’exploitation compatibles : Windows XP et Windows Vista • Processeur : 400 MHz (minimum); 1 GHz (recommandé) • Mémoire : 96 Mo (minimum); 256 Mo (recommandé) • Disque dur : 280 Mo (minimum); 500 Mo (recommandé) • Afchage : 800 x 600, 256 couleurs (minimum); 1 024 x 768, couleurs 32 bits (recommandé) • Internet Explorer version 6 Renseignements sur la sécurité Attention : N’utilisez pas les casques et micro-casques à volume élevé sur de longues périodes. Cela pourrait provoquer des problèmes d’audition. Conservez toujours un niveau d’écoute modéré. Consultez le site www.plantronics.com/healthandsafety pour obtenir de plus amples renseignements sur les micro-casques et l’audition.Nous vous recommandons fortement de vous reporter aux instructions du guide de configuration animé et du guide de l’utilisateur complet sur le CD.42315
Installation du Savi Office WO200 1. Connexion du chargeur à la baseConnectez le chargeur à la base. Appuyez fermement sur le chargeur jusqu’à ce qu’il soit bien en place.2. Connexion de la base au téléphone2-1. Branchez le câble d’interface dans la prise d’interface de la base.2-2. Débranchez le câble enroulé de combiné sur le téléphone, puis branchez le câble d’interface dans cette même prise sur le téléphone.2-3. Branchez le câble enroulé de combiné dans la boîte de jonction du câble d’interface.3. Branchement du bloc d’alimentation3-1. Branchez la mini-che du bloc dans la prise d’alimentation de la base. 3-2. Branchez la che dans une prise électrique. 4. Recharge du micro-casque Poussez doucement le micro-casque dans le chargeur. Chargez le micro-casque pendant au moins 20 minutes avant de l’utiliser pour la première fois. Une charge complète dure 3 heures. 5. Vérification de la configuration5-1. Sur le téléphone, réglez le volume à la moitié.5-2. Assurez-vous que le sélecteur de conguration de la base est positionné sur « A » et que les volumes d’émission et de réception du téléphone sont réglés sur 3.REMARQUE : sur la plupart des téléphones, ces réglages par défaut permettent d’obtenir la meilleure qualité sonore.5-3. Mettez le micro-casque, puis appuyez sur le bouton de contrôle des appels.5-4. Soulevez le combiné du téléphone.5-5. Vous devriez entendre la tonalité. Si la tonalité est claire, appuyez sur le bouton de contrôle des appels du micro-casque, puis passez à l’étape 6. Appel de test avec le téléphone.5-6. Si la tonalité est trop forte ou trop faible, réglez le volume du micro-casque.5-7. Si, malgré vos réglages, la tonalité n’est toujours pas clairement audible, changez la position du sélecteur de conguration jusqu’à ce qu’elle vous convienne. REMARQUE : même si plusieurs réglages peuvent fonctionner avec le téléphone, un seul est optimal.5-8. Pour terminer la conguration, appuyez sur le bouton de contrôle des appels du micro- casque et reposez le combiné sur le téléphone.6. Appel de test avec le téléphone6-1. Mettez le micro-casque, puis appuyez sur le bouton de contrôle des appels.6-2. Soulevez le combiné du téléphone.6-3. Composez le numéro sur le téléphone. 6-4. Au besoin, réglez le volume de réception sur le micro-casque.6-5. S’il est encore trop fort ou trop faible, ajustez-le sur la base du téléphone.6-6. Si le volume d’émission ne convient pas à votre interlocuteur, réglez-le sur la base du téléphone.6-7. Pour terminer l’appel de test, appuyez sur le bouton de contrôle des appels du micro-casque et reposez le combiné sur le téléphone.7. Connexion à l’ordinateur7-1. Branchez une extrémité du câble USB dans le port USB à l’arrière de la base.7-2. Branchez l’autre extrémité dans un port USB de l’ordinateur.7-3. Insérez le CD dans le lecteur optique de l’ordinateur et installez le logiciel PerSono. Suivez les instructions afchées.8. Appel de test avec l’ordinateur8-1. Démarrez PerSono Suite sur l’ordinateur.8-2. Mettez le micro-casque, puis appuyez sur le bouton de conversation par PC sur la base.8-3. Composez le numéro de téléphone avec votre application de téléphonie.8-4. Vous pouvez régler le volume d’émission et d’écoute avec l’application de téléphonie ou avec l’option Sons et périphériques audio du Panneau de conguration de Windows.8-5. Vous pouvez ajuster le volume d’écoute sur le micro-casque.8-6. Pour raccrocher, appuyez sur le bouton de contrôle des appels du micro-casque.Pour plus de détails sur l’utilisation de votre système de micro-casque sans l professionnel Savi Ofce WO200, consultez le guide de l’utilisateur sur le CD.TEMPS DE CHARGE20 min ..................... Charge minimale avant la première utilisation3 heures .................. Charge complète
1Audífono Savi WH210Base Savi WO11. Volumen de escucha (también controla las funciones de silencio y conmutación)2. Botón de control de llamadas3. Luz indicadora 4. Micrófono con anulación de ruido5. Tapones6. Base de carga642351. Volumen de conversación del teléfono de escritorio2. Control de configuración 3. Volumen de escucha del teléfono de escritorio 4. Botón de suscripción y luz indicadora5. Luz indicadora de energía/carga 6. Entrada de alimentación7. Entrada del dispositivo para descolgar el teléfono 8. Entrada del cable de interfaz del teléfono 9. Puerto USB10. Botón de conversación por el teléfono de escritorio y luz indicadora11. Botón de conversación por la PC y luz indicadoraFuente de alimentación de la baseCable de interfaz del teléfonoEl CD incluye: • Software PerSono¨ Suite• Guía animada de conguración• Manual del usuario completoCable USB1067811942315BienvenidoFelicidades por su compra de un nuevo producto Plantronics. Esta guía de inicio rápido contiene instrucciones para congurar el sistema de audífonos inalámbricos profesionales Savi Ofce WO200. Antes de instalar o utilizar el producto, consulte las instrucciones de seguridad (aparte) para obtener información importante acerca de la seguridad del producto.Requisitos del sistemaLos requisitos mínimos del sistema para Savi Ofce son:• Sistemas operativos compatibles: Windows XP, Windows Vista • Procesador: procesador Pentium a 400 MHz o equivalente (mínimo); procesador Pentium a 1GHz o equivalente (recomendado) • RAM: 96 MB (mínimo); 256 MB (recomendado) • Disco duro: 280 MB (mínimo); 500 MB (recomendado) • Pantalla: 800 x 600, 256 colores (mínimo); 1024 x 768 color de alta calidad, 32 bits (recomendado) • Debe tener instalado Internet Explorer V6 o posterior en el sistema (necesario) Instrucciones de seguridad No use nunca los audífonos o auriculares a un volumen alto durante periodos prolongados. Esto puede causar pérdida de audición. Use siempre un volumen moderado. Visite www.plantronics.com/healthandsafety para obtener más información acerca de los auriculares y la audición.Le recomendamos que consulte las instrucciones animadas de configuración y el manual del usuario completo incluidos en el CD.
Instalación del sistema Savi Office WO2001. Conexión de la base de carga a la baseConecte la base de carga del audífono a la base. Presione rmemente la base de carga contra la base hasta que encaje en su sitio.2. Conexión de la base al teléfono de escritorio2-1. Conecte el cable de interfaz del teléfono a la entrada correspondiente en la base.2-2. Después de desconectar el cable espiral del auricular del teléfono de escritorio, conecte el cable de interfaz del teléfono a la entrada de auricular (ahora desocupada) del teléfono de escritorio.2-3. Conecte el cable espiral del auricular a la caja de conexiones del cable de interfaz del teléfono.3. Conexión de la fuente de alimentación a la base3-1. Conecte la fuente de alimentación de la base a la entrada de alimentación de la base. 3-2. Conecte la fuente de alimentación a una toma de corriente. 4. Acoplamiento y carga del audífono Presione suavemente el audífono en la base de carga. Cárguelo durante al menos 20 minutos antes de usarlo por primera vez. La carga completa tarda 3 horas. 5. Comprobación de la configuración5-1. Ajuste el volumen del teléfono de escritorio en un nivel intermedio.5-2. En la base, compruebe que el control de conguración esté ajustado en “A”, y que el volumen de conversación y el volumen de escucha del teléfono de escritorio estén ajustados en el nivel 3.NOTA En la mayoría de los teléfonos, estos ajustes precongurados de fábrica producen un sonido óptimo.5-3. Con el audífono puesto, presione el botón de control de llamadas del audífono.5-4. Retire el auricular de la base del teléfono de escritorio.5-5. Espere a escuchar el tono de marcar. Si escucha claramente el tono de marcar, presione el botón de control de llamadas del audífono y continúe con el paso 6. Realización de una llamada de prueba con el teléfono de escritorio.5-6. Si el tono de marcar se escucha demasiado alto o demasiado bajo, ajuste el volumen del audífono.5-7. Si el tono de marcar aún no suena claro, ajuste el control de conguración hasta obtener un sonido óptimo. NOTA Puede haber varias conguraciones que funcionen con su teléfono; sin embargo, solo una es la posición óptima.5-8. Presione el botón de control de llamadas del audífono y devuelva el auricular a la base para nalizar la conguración.6. Realización de una llamada de prueba con el teléfono de escritorio6-1. Con el audífono puesto, presione el botón de control de llamadas del audífono.6-2. Retire el auricular de la base del teléfono de escritorio.6-3. Marque el número en el teléfono de escritorio. 6-4. Si es necesario, ajuste el volumen de escucha en el audífono.6-5. Si el volumen de escucha sigue siendo demasiado alto o demasiado bajo, ajuste el volumen de escucha del teléfono de escritorio en la base.6-6. Si el volumen de conversación es demasiado alto o demasiado bajo para su interlocutor, ajuste el volumen de conversación del teléfono de escritorio en la base.6-7. Presione el botón de control de llamadas del audífono y devuelva el auricular a la base para nalizar la llamada de prueba.7. Conexión a la PC7-1. Conecte el cable USB al puerto USB de la parte posterior de la base.7-2. Conecte el otro extremo del cable USB al puerto USB de la PC.7-3. Inserte el CD e instale el paquete de software PerSono . Siga las instrucciones de instalación que aparecen en la PC.8. Realización de una llamada de prueba con la PC8-1. Compruebe que el paquete de software PerSono se está ejecutando en su PC.8-2. Con el audífono puesto, presione el botón de conversación por la PC de la base.8-3. Marque el número con la aplicación de teléfono.8-4. Ajuste el volumen de escucha y de conversación con la aplicación de teléfono o en Dispositivos de sonido y audio, en el Panel de control de la PC.8-5. Puede realizar un ajuste no del volumen de escucha en el auricular.8-6. Para terminar la llamada de prueba, presione el botón de control de llamadas del audífono.Consulte el manual del usuario completo incluido en el CD para obtener más información acerca de cómo usar el sistema de audífonos inalámbricos profesionales Savi Ofce WO200.TIEMPO DE CARGA20 min ..................... Carga mínima antes del primer uso3 horas .................... Carga completa
1Headset Savi WH210Base do Savi WO11. Volume de audição (controla também as funções de mudo e alternância)2. Botão de controle de chamadas3. Luz indicadora 4. Cancelamento de ruídos5. Pontas auriculares6. Base de carga642351. Volume de fala do telefone de mesa2. Chave de configuração 3. Volume de audição do telefone de mesa 4. Botão de vinculação e luz indicadora5. Luz indicadora de energia/carga 6. Entrada de energia7. Tomada do suporte de monofone 8. Entrada do cabo de interface do telefone 9. Porta USB10. Botão de conversação e luz indicadora do telefone de mesa11. Botão de conversação e luz indicadora do PCFonte de alimentação da baseAs Cabo de interfaceO CD inclui: • Software PerSono¨ Suite • Guia de instalação animado• Guia completo do usuárioCabo USB1067811942315Bem-vindoParabéns por adquirir o seu novo produto da Plantronics. Este Guia de Início Rápido contém instruções para configurar o sistema de headset wireless profissional do Savi Office WO200. Consulte o folheto de instruções sobre segurança para obter informações importantes de segurança do produto antes da instalação ou do uso do produto.Requisitos de sistemaOs requisitos mínimos de sistema para o Savi Ofce são os seguintes:• Sistemas operacionais suportados: Windows XP, Windows Vista • Processador: processador Pentium de 400 MHz ou equivalente (mínimo); processador Pentium de 1GHz ou equivalente (recomendado) • RAM: 96 MB (mínimo); 256 MB (recomendado) • Disco rígido: 280 MB (mínimo); 500 MB (recomendado) • Visor: 800 x 600, 256 cores (mínimo); cores de alta resolução de 1024 x 768, 32 bits (recomendado) • Internet Explorer 6.0 ou superior (necessário) Instruções de Seguranç Não use fones de ouvido/headsets em volume muito alto por períodos prolongados de tempo. Isso pode causar a perda de audição. Ouça sempre em níveis moderados. Visite www.plantronics.com/healthandsafety para obter mais informações sobre headsets e assuntos de audição.Recomendamos que você consulte o CD com instruções interativas de configuração e o Guia do Usuário.
Configurando o sistema Savi Office WO2001. Conectando a base de carga à baseConecte a base de carga do headset à base. Empurre rmemente a base até que ela se encaixe e fique no lugar.2. Conectando a base ao telefone de mesa2-1. Conecte o cabo de interface do telefone à entrada do cabo de interface na base.2-2. Após desconectar o cabo espiral do monofone do telefone de mesa, conecte o cabo de interface do telefone para abrir a porta do monofone no telefone de mesa.2-3. Conecte o cabo espiral do monofone à caixa de junção do cabo de interface do telefone.3. Conectando a fonte de alimentação à base3-1. Conecte a fonte de alimentação da base na entrada de energia da base. 3-2. Conecte a fonte de alimentação à tomada.4. Encaixando e recarregando o headset Empurre levemente o headset para a base de carga. Carregue por, no mínimo, 20 minutos antes de usar pela primeira vez. Uma carga completa leva 3 horas. 5. Verificando a configuração5-1. Ajuste o volume do telefone de mesa para um nível médio.5-2. Na base, certique-se de que a chave de conguração esteja denida para “A” e que os volumes de fala e de audição do telefone estejam definidos para 3.NOTA para a maioria dos telefones, as congurações padrões de fábrica são as melhores.5-3. Com o seu headset ligado, pressione o botão de controle de chamadas do headset.5-4. Remova o monofone da base do telefone de mesa.5-5. Ouça um tom de discagem. Se o tom de discagem for claro, pressione o botão de controle de chamadas do headset e continue no Passo 6. Fazendo uma chamada teste com o telefone de mesa.5-6. Se o tom de chamada soar muito alto ou muito suave, ajuste o volume do headset.5-7. Se o tom de discagem não soar claro, ajuste a chave de conguração até que ele atinja o som ideal. NOTA diversas congurações podem funcionar com o seu telefone; no entanto, apenas uma será a posição ideal.5-8. Pressione o botão de controle de chamadas do headset e retorne o monofone à base para concluir a configuração.6. Fazendo uma chamada teste com o telefone de mesa6-1. Com o seu headset ligado, pressione o botão de controle de chamadas do headset.6-2. Remova o monofone da base do telefone de mesa.6-3. Disque o número usando o seu telefone de mesa. 6-4. Se necessário, ajuste o volume de audição do headset.6-5. Se o volume de audição do telefone de mesa ainda estiver muito alto ou muito suave, ajuste-o na base.6-6. Se o volume de fala estiver muito alto ou muito suave para o receptor, ajuste o volume de fala do telefone na base.6-7. Pressione o botão de controle de chamadas do headset e retorne o monofone à base para concluir a chamada teste.7. Conectando ao PC7-1. Conecte o cabo USB na porta USB da parte traseira da base.7-2. Conecte a outra extremidade do cabo USB na porta USB do PC.7-3. Insira o CD e instale o software PerSono Suite. Siga as instruções de instalação exibidas em seu computador.8. Fazendo uma chamada teste com o PC8-1. Verique se o software PerSono Suite está em execução no seu computador.8-2. Com o headset ligado, pressione o botão de conversação do computador na base.8-3. Disque um número usando o aplicativo do seu softphone8-4. Ajuste os volumes de fala e audição usando o aplicativo do seu softphone e/ou na opção “Sons e Dispositivos de Áudio” no Painel de Controle do seu computador.8-5. Você pode ajustar da melhor forma o volume de audição no headset.8-6. Para nalizar a chamada teste, pressione o botão de controle de chamadas no headset.Consulte o Guia de Usuário, que está no CD, para obter mais detalhes de como usar o seu sistema de headset wireless profissional do Savi Office WO200.TEMPO DE CARREGAMENTO20 min ..................... Carga mínima antes do primeiro uso3 horas .................... Recarga completa
Homologação AnatelEste produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela resolução 242/2000, e atende aos requisitos técnicos aplicados. Para maiores informações consulte o site da ANATEL.http://www.anatel.gov.br Distribuído por Plantronics Telecomunicações LtdaCNPJ 05.758.913/0001-95(01)078984017106100647-09-1893“ ESTE EQUIPAMENTO OPERA EM CARÁTER SECUNDÁRIO. ISTO É, NÃO TEM DIREITO A PROTEÇÃO CONTRA INTERFERÊNCIA PREJUDICIAL, MESMO DE ESTAÇÕES DO MESMO TIPO E NÃO PODE CAUSAR INTERFERÊNCIA A SISTEMAS OPERANDO EM CARÁTER PRIMÁRIO. ”
Plantronics, Inc.345 Encinal StreetSanta Cruz, CA 95060United StatesTel: 800-544-4660Tel: 831-426-5858www.plantronics.com©2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, PerSono, Savi, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners.Patents US 5,210,791; D539,266; D469,756; Australia 147229; France 651,857-651,865; Germany 40108524.4; GB Regd.Des.No. 2104923; Patents Pending.82328-02 (07.09)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help.FCC REGISTRATION INFORMATION — Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equipment is a label that contains a product identier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details.The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For products approved after August 8, 2001, the REN for this product is part of the product identier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notied in advance in order for you to make necessary modications to maintain uninterrupted service.If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that you disconnect the equipment until the problem is resolved.DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user-serviceable components.We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer terminal equipment connected to AC power sources.Exposure to RF RadiationThe internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information.In order to comply with FCC RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation.NOTE: Modications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.INDUSTRY CANADA REGULATORY INFORMATIONThis product meets the applicable Industry Canada technical specications/Le présent materiel est conforme aux specications techniques applicable d’ Induristrie Canada. This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
en Safety Instructions ar إرشادات حول السلامة bg Инструкции за безопасностcs Bezpečnostní pokyny da Sikkerhedsvejledningde Sicherheitshinweiseel Οδηγίες για την ασφάλειαes Instrucciones de seguridadfa دستورالعمل های ایمنیfr Instructions de sécuritéhe הוראות בטיחותhr Sigurnosne uputehu Biztonsági előírásokit Informazioni sulla sicurezzamk Безбедносни упатстваnl Veiligheidsinstructiesno Sikkerhetsinstruksjonerpl Instrukcje bezpieczeństwapt Instruções de Segurançaro Instrucţiuni de siguranţăru Инструкции по безопасностиsl Varnostna navodilasv Säkerhetsanvisningartr Instrucţiuni de siguranţă
ARENإرشادات حول السلامة يرجى قراءة إرشادات السلامة والتشغيل التالية قبل استخدام منتج Plantronics. يرجى الاحتفاظ بهذه الإرشادات للرجوع إليها. عند استخدام هذا المنتج، يجب اتباع تدابير وتحذيرات السلامة الأساسية هذه للتخفيف من خطر الحريق والصدمات الكهربائية والإصابات الجسدية وخطر الأضرار المادية. تحذيرات استخدم فقط منتجات Plantronics المصممة للاستخدام مع نظام Plantronics هذا.الأطفال. لا تسمح للأطفال باللعب بالمنتج على الإطلاق إذ قد تتسبب القطع الصغيرة بالاختناق. وصّل محوّل التيار المتناوب بالمأخذ الأقرب إلى الجهاز والذي يسهل الوصول إليه.للتخفيف من خطر حدوث صدمة كهربائية، أو انفجار أو حريق، استخدم فقط الشاحن الموفر أو محوّل التيار المتناوب Class 2 لشحن سماعة الرأس. تأكد من أن درجة الفولتية (مثلاً 120 فولت، 60 هرتز) تطابق مصدر الطاقة الذي تنوي استخدامه. Safety Instructions Please read the following safety and operational instructions before using your Plantronics product. Please keep these instructions for your reference. When using this product, these basic safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons and damage to property. GeneralOperating, charging and storage temperature is 0ºC to 40ºC (32ºF to 104ºF). Warnings• Only use those Plantronics products designed for use with this Plantronics system.• CHILDREN. Never allow children to play with the product—small parts may be a choking hazard. • Plug the AC adapter into the outlet nearest the equipment that is easily accessible.• To reduce the risk of electric shock, explosion or fire, use only the supplied charger or Class 2 AC adapter to charge the headset. Ensure that the voltage rating (e.g. 120v, 60 Hz) corresponds to the power supply you intend to use. • Do not disassemble the product or AC adapter as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used. • Do not insert anything into the product because this may cause damage to the internal components or cause injury to you.• If this system includes a mobile phone headset, check local laws regarding use of a mobile phone and headset while driving. If you use the headset while driving, ensure your attention and focus remain on driving safely.• Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most states and regions.• If this system includes a Bluetooth headset, observe all signs or instructions that require an electrical device or RF radio product to be switched off in designated areas, such as hospitals, blasting areas, potentially explosive atmospheres, and aircraft. • Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or sink, in a wet basement, or near a swimming pool. • Discontinue use of product and contact Plantronics if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged, or if the product has come into contact with liquids.• This product should never be placed over or near a heat register and should not be placed in locations without which do not have proper ventilation.• If you experience a skin irritation after using this product, discontinue use and contact Plantronics.• Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset /headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before putting your headset or headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset or headphones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets or headphones at high volume levels. 4. Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you. See www.plantronics.com/healthandsafety for more information on headsets/headphones and hearing.To avoid the risk of electric shock, explosion, fire or leakage of corrosive or toxic chemicals, please observe the following charging and battery warnings: Charging Warnings• Use only the charger supplied by Plantronics to charge the product. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use.• Charge the headset/headphones according to the instructions supplied with the unit.• Plug the AC adapter or charger into an outlet that is near the equipment and will be easily accessible.• Never charge the battery where the temperature may fall below 0ºC (32ºF) or rise above 40ºC (104ºF) - for example in an unattended motor vehicle.• Avoid charging the battery while it is unattended. Headset Battery Warnings The headset is equipped with a non-replaceable battery. To reduce the risk of fire or injury to persons, read and follow these instructions. Do not attempt to open the headset or remove the battery.Do not dispose of the headset or battery in a fire. The battery may explode. Check local laws for disposal instructions.Do not open or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed.Charge the headset according to the instructions supplied with the headset.RECYCLING: The battery used in your headset must be recycled or disposed of properly. Contact your local recycling center for proper disposal of your headset.

Navigation menu