Polar Electro Y6 Polar Cycling Speed / Cadence Sensor User Manual Cadence
Polar Electro Oy Polar Cycling Speed / Cadence Sensor Cadence
Contents
- 1. Important Information Leaflet
- 2. User Manual Cadence
- 3. User Manual Speed
User Manual Cadence
POLAR CADENCE SENSOR Model:Y7 Manufactured by Polar Electro Oy Professorintie 5 FI-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300 www.polar.com 17948570.00 GEN 10/2013 WINLEE http://www.polar.com/en/support/polar_cadence_sensor_bluetooth_smart User Manual Gebrauchsanleitung Manuel d’Utilisation Manuale d’uso Gebruiksaanwijzing Manual del Usuario Manual do utilizador Brugervejledning Käyttöohje Brukerveiledning Bruksanvisning 使⽤説明書 快捷使用指南 快捷使用指南 1 ID: XXXXXXXX ID: ENGLISH Polar Cadence Sensor Bluetooth® Smart is designed to measure cadence, i.e. crank revolutions per minute, when cycling. Polar Cadence Sensor Bluetooth® Smart is compatible with Bluetooth® Smart Ready devices that support Bluetooth® Cycling Speed and Cadence Service. When using a smartphone, a separate application is required to view cadence sensor data. It is recommended to use the Polar Beat application but it is also possible to use other applications. SYSTEM IMAGE If you have a polarpersonaltrainer.com account, Polar Beat automatically synchronizes your training files to it. Please note that you must sign in to your polarpersonaltrainer.com account when starting Polar Beat for the autosync to work. The latest version of this user manual can be downloaded at www.polar.com/support. Please follow the pictures on the inner covers. Write the device ID printed on your cadence sensor in the space on the inner front cover (picture 1). The original marking may fade as a result of normal wear and tear. Product Elements 1. 2. Cadence Sensor (pictures 2 A and 4 A) Cadence Magnet (picture 4 B) ENGLISH Installing the Cadence Sensor For a video tutorial, see Installing Polar Cadence Sensor Bluetooth® Smart at www.polar.com/en/polar_community/videos. To install the cadence sensor and cadence magnet, you need cutters. 1. Check the chain stay for a suitable place for the cadence sensor (picture 2). Do not install the sensor on the same side as the chain. The Polar logo on the sensor should be facing away from the crank (picture 4). 2. Attach the rubber part to the sensor (picture 3). 3. Clean and dry a suitable place for the sensor and place the sensor on the chain stay (picture 4 A). If the sensor touches the rotating crank, turn the sensor slightly upwards. Pass the cable ties over the sensor and rubber part. Do not tighten them fully yet. 4. Place the cadence magnet vertically on the inner side of the crank (picture 4 B). Before attaching the magnet, clean and dry the area thoroughly. Attach the magnet to the crank and secure with the tape. ENGLISH 5. Fine-tune the positioning of the sensor so that the magnet passes close to the sensor without actually touching it (picture 5). Move the sensor towards the magnet so that the gap between the sensor and the magnet is under 4 mm/0.16’’. The gap is correct when you can fit a cable tie between the magnet and the sensor. There is a small caved dot at the backside of the sensor, which indicates the spot the magnet should be pointing at when passing the sensor. 6. Rotate the crank to test the cadence sensor. The flashing red light on the sensor indicates that the magnet and the sensor are positioned correctly. If you keep rotating the crank, the light will go off. Tighten the cable ties securely and cut off any excess cable tie ends. Cadence Sensor Pairing Your new cadence sensor must be paired with the receiving device in order to receive cadence data. This enables training in a group without interference from other sensors. For more information, see the user guidance material of the receiving device or mobile application. ENGLISH Care and Maintenance Keep the cadence sensor clean. Clean it with a mild soap and water solution, and rinse off with clean water. Dry it carefully with a soft towel. Never use alcohol or any abrasive material, such as steel wool or cleaning chemicals. Do not immerse the cadence sensor in water. Your safety is important to us. Check that you can turn your handlebars normally, and that the cable wires for brakes or gears do not catch the sensor. Make sure the sensor does not disturb pedaling or using the brakes or gears. While riding your bike, keep your eyes on the road to prevent possible accidents and injury. Avoid hard hits as these may damage the sensor. Replacement magnet sets can be purchased separately. Cadence sensor battery The battery cannot be replaced. The sensor is sealed in order to maximize mechanical longevity and reliability. To purchase a new sensor, contact your authorized Polar Service Center or retailer. The battery level of your sensor is displayed on the receiving device if it supports Bluetooth® Battery Service. To increase battery life, Polar Cadence Sensor Bluetooth® Smart goes into power saving mode in ten minutes if the magnet is not passing the sensor. ENGLISH Frequently Asked Questions What should I do if... ...the cadence reading is 0 or there is no cadence reading while cycling? • Make sure the position and distance of the cadence sensor to the crank magnet are appropriate. • Check that you have activated the cadence function in the receiving device. For further information, see the user guidance material of the receiving device or mobile application. • If the 0 reading appears irregularly, this may be due to temporary electromagnetic interference in your current surroundings. • If the 0 reading is constant, the battery may be empty. ...there are irregular cadence or heart rate readings? • Disturbance may occur near microwave ovens and computers. Also WLAN base stations may cause interference when training with Polar Cadence Sensor Bluetooth® Smart. To avoid erratic reading or misbehaviors, move away from possible sources of disturbance. How do I know... ... if the sensor is transmitting data to the receiving device? • When you begin cycling, a flashing red light indicates that the sensor is alive and it is transmitting cadence signal. As you continue cycling, the light goes off. ENGLISH Technical Specification Operating temperature: Battery life: Accuracy: Material: Water resistance: -10 ºC to +50 ºC / +14 ºF to +122 ºF Average 4 years (if you train on average 1h/day, 7 days/week), depending on conditions ±1 % Thermoplastic polymer Splash proof FCC ID: INWY6 Bluetooth QD ID: ????? Copyright © 2013 Polar Electro Oy, FI-90440 KEMPELE. All rights reserved. No part of this manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro Oy. The names and logos marked with a ™ symbol in this user manual or in the package of this product are trademarks of Polar Electro Oy. The names and logos marked with a ® symbol in this user's manual or in the package of this product are registered trademarks of Polar Electro Oy. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Polar Electro Oy is under license. ENGLISH 4 POLAR CADENCE SENSOR Model:Y7 Manufactured by Polar Electro Oy Professorintie 5 FI-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300 www.polar.com 17948570.00 GEN 10/2013 WINLEE http://www.polar.com/en/support/polar_cadence_sensor_bluetooth_smart User Manual Gebrauchsanleitung Manuel d’Utilisation Manuale d’uso Gebruiksaanwijzing Manual del Usuario Manual do utilizador Brugervejledning Käyttöohje Brukerveiledning Bruksanvisning 使⽤説明書 快捷使用指南 快捷使用指南
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2013:05:30 13:58:39+03:00 Modify Date : 2013:06:05 08:26:05+03:00 Type : Info Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : null Metadata Date : 2013:06:05 08:26:05+03:00 Format : application/pdf Document ID : uuid:d0c47e2d-e8f5-43c5-89b7-696dc424a68c Instance ID : uuid:47fdca5d-1800-4345-8bc7-306c5a11ee2b Page Mode : UseOutlines Page Count : 11EXIF Metadata provided by EXIF.tools