Polycom BTMOD01 Bluetooth Radio Module User Manual Polycom Bluetooth Module

Polycom Inc. Bluetooth Radio Module Polycom Bluetooth Module

Users Manual Revised

Polycom Bluetooth Module Integration Note from Corporate compliance to Engineering. The Polycom Bluetooth module is designed to be used in Proprietary Polycom set top videoconferencing products. Usage notes The Module is approved using the FCC ‘unlicensed modular transmitter approval’ method. Therefore the module must only be used with the approved antenna board. Use of another antenna requires re-approval & must be submitted to Polycom corporate compliance for FCC registration. All changes to the module must be made through the Polycom electronic change order process. All Polycom software written to control this device must use the Radio Power Table within the module that controls the maximum output power to +4.16 +/- 2 dBm. When using this module in a Polycom design. The placement of the Antenna and module must meet the following RF exposure requirements. A separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. The following labelling & user guide information must be used by anyone using this module. The ECO process will check that these guidelines have been followed. Labelling: The following information must be placed on the Regulatory label of the unit that the module is installed.
User Guide: The following statements must be put in the User guide for the product: Item 1 Pt 15 Rules This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Item 2 Class B Digital Device or Peripheral NOTE: The Radio module within this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Item 2c RF module included To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. Item 3 Modifications In accordance with part 15 of the FCC rules, the user is cautioned that any changes or modifications not expressly approved by Polycom Inc. could void the user’s authority to operate the equipment. Note to Integrators: The user guide should NOT provide any instructions on how to remove or install the module.

Navigation menu