Polygroup CW002 Remote Controller User Manual
Polygroup Trading Limited Remote Controller
Contents
- 1. 2AABT-CW002_User Manual
- 2. User Manual
User Manual
2.7 m / 9 ft EZ Connect™ Pre-lit Aspen Micro Dot LED Tree ITM. / ART. 279939, 2002052 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For assistance with assembly, parts and customer service, call (US & Canada only): 1-888-919-0070 (English, Spanish, French) at 10am-6pm, Mon-Fri, Eastern Time, email: warranty@polygroup.com, or visit www.polygroupstore.com. Please note if you are calling outside of USA & Canada, international toll fees may apply. Customer Service Hotline Hours: 8am-4pm, Mon-Fri, MST. TREE ASSEMBLY INSTRUCTIONS This tree comes with EZ Connect™ and Simple Shape™ technology, allowing you to set up and light your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1. Choose an appropriate location near a wall outlet. 2. Assemble the tree stand on a level surface. (See Fig. A) Fig. A - Tree Stand Assembly Eye Bolt 1. Pull apart tree stand legs until they snap and form an ‘X’ shape. 2. Insert the tree bottom into the assembled stand. Insert and tighten the eye bolt into the stand until firmly secured. Click Eye Bolt 3. To close the stand, press the metal button and fold the legs together. (For Indoor Use Only) Fig. B - Tree and Light Assembly Tree Top Do Not Tamper Internal Parts Section 4 Open the protective cap Section 3 Do Not Tamper Internal Parts Open the protective cap Section 2 FR, SP, ICE(K25V290083G) KR(K25C290083K) US, CAN, MX, TW (TS-48W29V) Section 1 Plug Adaptor Into Wall Outlet Control box AU(K25V290083A) JP(K25C290083J) Foot Pedal On/Off Switch UK(K25V290083B) Page: 1 of 6 3. Each tree section is numbered with a sticker. Please identify all sections before assembling. 4. Assemble the tree from the bottom to the top (See Fig. B). Remove protection cap, and insert the center pole into the stand. Then slot together the remaining poles securely until the tree top is installed. Be sure that all cords are free from branch hinges. 5. Plug the adaptor into the wall outlet (See Fig. B). Your entire tree should now be lit. 6. This is a Simple Shape™ tree and no shaping is required. Just slightly upsweep all tips (See Fig. C) and shift branches Fig. C Side view Top view STORAGE INSTRUCTIONS 1. Unplug adaptor from the wall outlet. Then remove all ornaments and decorations. 2. Disassemble the tree from the top to the bottom. Gently lift the center pole straight up to remove from the section below , and fold all branches toward the pole. Continue until the lowest tree section is removed from the tree stand. 3. Close the protective caps on the poles to avoid damaging the internal parts. (See Fig. D) 4. Carefully place all tree sections into the shipping box and tape (not included) it shut. 5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may damage your tree. Fig. D TROUBLESHOOTING TIPS If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker 1. 2. Turn the poles gently to ensure pole-to-pole connection is secured. Loose Hinge Pin 1. Place the branch into the slot of the bracket. 2. Insert a new hinge pin (included) through the hole and secure with a retainer washer (included). (See Fig. E) Fig. E SPARE PARTS This tree includes hinge pins/washers. If extra parts are needed, please contact our customer service center. DUAL COLOR LIGHT CONTROLLER INSTRUCTIONS Simply press the selector button to select from the following light functions: 1. Clear Steady 2. Clear Fading 3. Multicolor Steady 4. Multicolor Fading 5. Clear / Multicolor Alternating 6. Clear / Multicolor Fading 7. Demo BATTERY REPLACEMENT Selector Button Remote Control 1. Remove the insultation tab. 2. Loosen the screw of the battery cover with a screwdriver (not included). Insulation Tab Page: 2 of 6 3. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the correct polarity (+ and -). 4. Retighten the screw to close and secure the battery cover. Battery CR2032 Cover WARNING 1. Use only the power adaptor supplied with this product. Using a different adaptor can damage the lights and will cause fire or electrical shock hazards. 2. For indoor use only. 3. This product contains a CR2032 button cell battery. If swallowed, it could cause severe injury or death in just 2 hours due to chemical burns and potential perforation of the oesophagus – seek medical attention immediately. 4. Keep batteries out of reach of children. 5. If you suspect your child has swallowed or inserted a button cell battery, immediately seek urgent medical assistance. 6. Make sure the battery compartment is correctly secured (e.g. the screw or other mechanical fastener is tightened), and do not use if the compartment is not secured. 7. Dispose of used button cell batteries immediately and safely. Flat batteries can still be dangerous. 8. Inform others about the risk associated with button cell batteries and how to keep their children safe. 9. Do not expose the lights to moisture. 10. Remove the batteries when the controllers are left unused, and are not expected to be used for an extended period of time, or when depleted. 11. Dispose of the used battery properly as per the directions on batteries, and local laws and regulations regarding the disposal of hazardous waste. 12. Clean the battery contact surfaces prior to battery installation. 13. Do not dispose of batteries in fire – batteries may leak or rupture. DISPOSAL OF USED BATTERIES Battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on the battery and/ or packaging indicates that used battery shall not be treated as municipal waste. Batteries should be disposed of at an appropriate collection point for recycling. By ensuring the used batteries are disposed of correctly, you will help preventing potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources. For more information about recycling of used batteries, please contact your local municipality waste disposal service. Hereby, Polygroup declares that the Christmas Tree is in compliance with RED 2014/53/EU. AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Page: 3 of 6 Distributed by: Costco Wholesale Corporation P.O. Box 34535 Seattle, WA 98124-1535 USA 1-800-774-2678 www.costco.com Imported by / Importé par : Costco Wholesale Canada Ltd.* 415 W. Hunt Club Road Ottawa, Ontario K2E 1C5, Canada 1-800-463-3783 www.costco.ca * faisant affaire au Québec sous le nom Les Entrepôts Costco Importado por: Importadora Primex S.A. de C.V. Blvd. Magnocentro No. 4 San Fernando La Herradura Huixquilucan, Estado de México C.P. 52765 RFC: IPR-930907-S70 (55)-5246-5500 www.costco.com.mx Imported by: Costco Wholesale Australia Pty Ltd 17-21 Parramatta Road Lidcombe NSW 2141 Australia www.costco.com.au Imported by: Costco Wholesale UK Ltd / Costco Online UK Ltd Hartspring Lane Watford, Herts WD25 8JS United Kingdom 01923 213113 www.costco.co.uk Imported by / Distributed by: Costco (Shanghai) Trading Co., Ltd. Room 2105, No. 2299 Yanan West Road Changning District, Shanghai, China +86-21-62577065 Distributed by: Costco Wholesale Iceland ehf. Kauptún 3-7, 210 Gardabaer Iceland www.costco.is Distribué par : Costco France 1 avenue de Bréhat 91140 Villebon-sur-Yvette France 01 80 45 01 10 www.costco.fr Imported by: Costco Wholesale Japan Ltd. 3-1-4 Ikegami-Shincho Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0832 Japan 044-281-2600 www.costco.co.jp Imported and Distributed by: Costco Wholesale Korea, Ltd. 40, Iljik-ro Gwangmyeong-si Gyeonggi-do, 14347, Korea 1899-9900 www.costco.co.kr Imported by / Manufactured for: Costco President Taiwan, Inc. No. 656 Chung-Hwa 5th Road Kaohsiung, Taiwan Company Tax ID: 96972798 449-9909 or 02-449-9909 (if cellphone) www.costco.com.tw Importado por: Costco Wholesale Spain S.L.U. Polígono Empresarial Los Gavilanes C/ Agustín de Betancourt, 17 28906 Getafe (Madrid) España NIF: B86509460 900 111 155 www.costco.es MADE IN CHINA / FABRIQUÉ EN CHINE / HECHO EN CHINA Page: 4 of 6 CUSTOMER SERVICE FOR CHRISTMAS TREES For any questions, assistance, or missing parts, DO NOT RETURN YOUR TREE TO PLACE OF PURCHASE. Please contact us via: call (US & Canada only) 1-888-919-0070 (English, Spanish, French) at 10am-6pm, Mon-Fri, Eastern Time, email: warranty@polygroup.com, or visit www.polygroupstore.com. Tree ID#: Customer Name: Tree UPC#: Address (No P.O. boxes): Store Purchased: City & State: Specify Problem: Zip Code: Day Phone: Date Purchased: TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS. Page: 5 of 6 FCC notices: WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Polygroup Trading Limited Unit 606, Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong www.polygroupstore.com ISEDC Statement Déclaration de l’ISEDC This device complies with ISEDC licence-exempt RSS standards or Interference caussing Equipment standard ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licenceou standard. Équipement ICES-003 du brouilleur. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes. Page: 6 of 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2019:01:15 19:38:56+08:00 Creator : Adobe Illustrator CC (Windows) Modify Date : 2019:03:07 16:11:04-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2019:03:07 16:11:04-08:00 Creator Tool : Adobe Illustrator CC (Windows) Format : application/pdf Title : User Manual---TG90P4826D49,D50,D48_9' PRE-LIT ASPEN Micro Dot LED TREE_EN 1 Document ID : uuid:719b78a8-3172-41e7-b1e7-653ef853c498 Instance ID : uuid:cff499a4-f0bb-44f8-a2ec-b46d030ef7cf Producer : Adobe PDF library 10.01 Page Count : 6EXIF Metadata provided by EXIF.tools