Polygroup CW003 Christmas Tree Lighting User Manual

Polygroup Limited(Macao Commercial Offshore) Christmas Tree Lighting

Contents

140404080GZU_2AABT-CW003_User manual

Section 3Section 2Section 190S80S100S100S80S50S50SDo Not TamperInternal PartsOpen theprotectivecoverDo Not TamperInternal PartsOpen theprotectivecoverControl boxSafety InformationSafety InformationIMPORTANT SAFETYINSTRUCTIONSa.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.When using electrical products, basic precautions should always be followed, including the following:b.Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installa-tion.c. This seasonal product is not intended for permanent installation or use.d.Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat.e.Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.f. Do not let lamps rest on the supply cord or on any wire.g.Unplug the product when leaving the house, when retiring for the night, or if left unattended.h.This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.i. Do not use this product for other than its intended use.j. Do not hang ornaments or other objects from cord, wire, or light string.k.Do not close doors or windows on the product or exten-sions cords as this may damage the wire insulation.l. Do not cover the product with cloth, paper, or any material that is not a part of the product when in use.m.This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.n.This product is equipped with push-in type lamps. Do not twist lamps.o.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.p.Read and follow all instructions that are on the product or provide with the product.q.SAVE THESE INSTRUCTIONSStep 1. Choose a location near a wall outlet.Step 2. Unfold the legs of the tree stand (D) and lay the stand on the floor.Step 3. Slide the locking disk of the tree stand (D) down until it snaps into place.Assembling the treeThis tree assmebles with Quick Set® technology---Set up and light up your tree in less than 10 minutes!Step 1.Remove the protective caps from the tree bottom (C) and insert the pole into the tree stand (D).Step 2.Remove the protective caps from the tree center (B) and insert the pole into the tree bottom (C) .Step 3.Insert the tree top (A) into the tree center (B).Step 4.Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges.Step 5.Insert the green label extension cord plug into the wall outlet. All your lights should now be lit.Step 6.When finished shaping the branches, slightly upsweep all branch tips for a uniform look.Package ContentsAssemblyAssembling the tree standPart Description QuantityA Tree top, tag 3 1B Tree center, tag 2 1C Tree bottom, tag 1 1D Tree stand 1Christmas TreeModel: DOU186755LEDCMRSku # 1000 654 240AdaptorTo Be PluggedInto WallOutlet
NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree.Step 1. Connect the light strings of the tree together and plug the power cord into a wall outlet.Step 2. If the tree comes with a foot pedal, step on the On/Off button.Press the selector button on the “Dual Color Light Controller” or “Remote Controller” to select among: (1) CLEAR ANDMULTI-COLOR ALTERNATING; (2) CLEAR LIGHTS; (3) MULTI LIGHTS and (4) TURN OFF BOTH LIGHTS.Note: The lights will be automatically reset to “CLEAR ANDMULTI-COLOR ALTERNATING” every time the product is powered up. For the remote controller, replace only with CR2032 battery. See bottom of the remote controller for replacement instruction.a)Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. b)Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.c)Remove fuse carefully.d)Risk of fire. Replace fuse only with 5,7, or10 Amp, 125 Volt fuse for the power cord set.e)Close fuse cover. Slide closed the fuse access cover on top of attachment plug.f )Risk of fire.Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.CAUTION: Use only power adaptor that wasprovided with this product. Using a different poweradaptor will damage the lights and cause fire, electricalshock hazard.OperationTurning on the treeHOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND REMOTE CONTROL:Fuse replacement of extension cordThis tree package includes hinge pins, washers, bulbsand fuse for any replacement or repair that you need toperform on your tree. If extra parts are needed, contactthe Customer Service Team at 1-877-527-0313 betweenthe hours of 8 am and 5 pm EST, Monday through Friday.Repairing Loose HingesStep 1. Place the branch into the slot of the bracketStep 2. Insert a new hinge pin through the holes of the bracket and secure with a washer.MaintenanceSpare parts1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclo-sures, loose connections, or exposed copper wire.2.Before disassembling the tree, unplug the tree and remove all ornaments and decorations.3.Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.4.Repeat this step for the center and bottom tree sections.5.When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. Cover the protective cap on the poles to avoid damaging the internal parts.6.When not in use, store neatly in a cool, dry location protected from sunlight.Use and Care InstructionsTroubleshootingUser servicing instructionsLightControllerSelectorButtonRemoteControllerProblem SolutionThe tree doesnot lightEnsure that all tree sections areplugged into each other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button.Check for blown fuses at the light stringand power cord plugs. Replace as needed with the replacement fuses provided.Check for loose, broken, or missingbulbs and replace as needed with the replacement bulbs providedChristmas TreeModel: DOU186755LEDCMRSku # 1000 654 240SPARE FUSE
FCC notices:Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Christmas tree With model PDC series or PDR series controllerFCC ID: 2AABT-CW003OutfitWith model PDC series or PDR series controllerLxGxYxS (First X = 30-120, second X=0-5, thirdly X=0100-2300)Note:"L" means that the low voltage. The first "x" indicates the size of the tree, said the use of height from 3ft-12ft."Gx" number of lines, G0 represents 0 drag line G5 on behalf of 5 drag line."Y" means tree stand. M means the tree is to use ordinary tree foot. R which means that the tree is to use rotating tree foot. The third "x" represents the number of lamp, from 100 to 2300 lamp."S" means that the tree pin.LIxYx (First X=06-220, second X=010-2300)Note:"L" means that the low voltage."I" indicates for indoor use only, if blank means for indoor and outdoor use.The first "x" indicates the size of Wreath/Garland/Teardrop/Tree/Swag, the size is from 06 in - 220 in in for Wreath/Teardrop/Tree/Swag; the size is from 06 ft - 50 ft in for Garland."Y" means type of product. "W" which means wreath. "G" which means Garland. "TD" which means teardrop. "T" which means tree. "S" which means swag.The second "x" represents the number of lamp, from 10 to 2300 lamps.

Navigation menu