Portal 724 MNBWS100 Bluetooth balance User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3426100
Application ID	U1DOH1qa8I+/CqomTcNmsg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.06kB (238303 bits)
Date Submitted	2017-06-14 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2017-05-31 15:12:38
Document Lastmod	2017-05-31 15:12:38
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	张润华

BLUETOOTH BODY SCALE
Model: MN-BWS100
Instruction Manual
Version 1.0
please read through this instruction manual prior to using this scale.
1/
Precautions
◆Place your scale on a carpet or on a solid level surface, such as tile, wood, or
laminate flooring.
◆Do not place your scale on a soft, wet or slippery floor.
◆Your scale contains delicate, high-precision parts. Avoid extrenes in temperature,
humidity, direct sunlight, shock, moisture and dust.
◆Do not step on your scale with your feet wet. Be sure that your feet are dry to prevrnt
slipping or serious injury.
◆Step on the center portion of your scale gently.
◆Do not step on the display window.
Indications for Use
This scale is designed for personal use.
Appearance introduction
Front
2/
Tempered glass
Back
Bottom shell
“ UNIT ”
button
Battery
cover
Carpet feet
×4
Handle
Installing (or Replacing) Batteries
Caution
◆Insert each battery with it´s positive (+) and negative (-) terminals properly aligned
3/
with the corresponding symbols in the battery compartment.
◆Improper installation of the batteries may cause battery leakage.
◆Replace all four batteries with new ones, when the “Lo” symbol is displayed.
◆Do not mix new and used batteries. It may cause damage to the scale or shorten battery
life.
◆The battery life is dependent upon the environmental temperature, battery type and
usage.
◆Remove the batteries from the battery compartment, when the scale is not to be used for
a long time. They may leak and damage the scale.
Steps for Installing (or Replacing) Batteries
◆ Remove the battery compartment cover on the underside of the scale by gently pushing
the hook in the direction indicated by the arrow and lifting the cover backward.
◆If necessary, remove the old batteries in the order suggested below. Install four new
batteries with
the positive (+) and negative (-) terminals properly aligned with the corresponding
symbols in the battery compartment.
◆Replace the cover by sliding it into the compartment and gently pressing it into place.
Measuring Your Weight
◆Place the scale on a solid level surface.
Tap the scale gently with one foot to turn it on and calibrate it to display “0.0 lb”.
The scale must becalibrated to ensure accurate measurement.
◆Step on the scale gently, placing both feet on the center portion of the scale.
4/
“- - - -” Four flashing dashes will display until the measurement is taken.
Please stand still during the measurement.
◆ Your weight is displayed.
Once the reading is taken you will hear 3 loud beeps.
Simultaneously, your weight will be displayed, all at once, in 3 flashing instances.
Then your weight will be displayed for 5 seconds on the LCD.
◆Step o the scale.
The scale will automatically turn o
standing on it.
after displaying your weight even if you are still
Specifications
Display
Resolution
Unit
Boot Mode
Digital LED
0.1 kg / 0.2 lb
Kg, lb, st
Gravity boot, power on, boot button
5/
Measurement Range
Accuracy
11.2-551 lb / 5.1-250 kg
50kg±3D,100kg±4D,150kg±5D,200kg±6D,250kg±7D
Weigh the Weight
11.2 lb / 5.1 kg
Zero Range
0.22 lb / 100 g
Overloading Tips
Turn off Mode
Low Voltage Detection
Reach to Max+11 1b/Max+5kg, it will be displayed “EEEE”
Automatic Turn off
Battery Voltage is 4±0.2 V, it will turn off after display“Lo” for
1 second.
Power source
Four type “ AA ” batteries
Volume
≥70dB（Test Distance:30cm）
( R6P or LR6, 1.5 Volt ×4 )
wireless communication
Bluetooth 4.0
Bluetooth Transmission
Distance
10 Meters(Unobstructed Transmission Distance)
Equipment Requirement
Size
Android 4.4 or above operating system and a blue version of 4.0 mobile
terminal equipment;
iOS7.0 or above operating system and a blue version of 4.0 mobile
terminal equipment.
≈ L380 × W320 ×H41 mm
System function description
◆the scale has an automatic power-on and off function.
◆Automatic turn off：
●When the battery is installed, the LED will turn off automatically after about 2
seconds.
●The battery voltage drops to the preset warning value, and it will turn off automatically after
the LED display “Lo” about 1 second.
●Steady display of weight about 6 seconds after the automatic turn off.
◆Unit defaults to “lb”, short press the machine “UNIT”button in the “lb”, “st”,
“kg” between the switch back and forth, each time to play a “beep” warning sound.
◆It can automatically weighing when people stand on the scale in the turnoff state.
◆When the weight is not locked, “---” is displayed on the LED and flashed twice.
◆After the weight is locked, the value will flash 3 times and a “beep” beep will be
played once every flashing.
◆During the use of the Bluetooth is not connected to the “
” flashing state, it will be
in a steady state after connection successfully.
Operating and Storage Environments
Operation Environment
Operation temperature: +10 - +40℃
6/
Storage Environment
Humidity: ≤ 90% RH
Temperature: -10 - +50℃
Humidity: ≤ 90% RH
Compliance with European Directives
The scale complies with the statutory Electromagnetic
2014/30/EU.
Compatibility (EMC) Directive
★Note: For Indoor use only. The displayed value may be adversely a
electromagnetic influences.
ected under extreme
Compliance with FCC Rules
The scale complies with part 15 of the FCC rules and contains the FCC ID: XXXXXXXXXXXX.
Maintaining the Scale
◆Clean the scale with a soft dry cloth or a cloth moistened with water and a mild
detergent. Never use alcohol or other harsh chemicals to clean the scale.
◆Remove the batteries from the battery compartment, when the scale is not going to be
used for a long time.
How the Wireless Connection Works
At the end of the measurement, your weight will be sent automatically to your tablet. You
do not need to do anything.
Before Requesting Service
Cause/Problem
Corrective Action
Nothing is displayed by
stepping on the scale.
Check the battery installation.
Replace with rour new batteries.
There is a large difference
between estimated weight and
data measurement.
Remove any foreign objects that
might be touching the bottom of
the scale.
If you cannot locate and fix the problem, contact your supplier.
7/
Component List
BLUETOOTH BODY SCALE
Instruction Manual
“ AA ” batteries
x1
x1
x4
Manufacturer
Manufacturer: Portal 724, LLC
ADD: 275 Hartz Way, Suite 105, Secaucus, NJ 07094 U.S.A
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
8/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 8
Author                          : 张润华
Comments                        : 
Company                         : 
Create Date                     : 2017:05:31 15:12:38+07:12
Creator                         : WPS Office
Modify Date                     : 2017:05:31 15:12:38+07:12
Producer                        : 
Source Modified                 : D:20170531151238+07'12'
Subject                         : 
Title                           : 手提秤规格书
Trapped                         : false

EXIF Metadata provided by EXIF.tools