Portal 724 MX724BT Upper Arm Blood Pressure Monitor User Manual TempConfidential

Download:
Mirror Download [FCC.gov]
Document ID	2892973
Application ID	2Xg07IY/17/ZwnO8/XHsjg==
Document Description	TempConfidential_User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78.81kB (985119 bits)
Date Submitted	2016-02-02 00:00:00
Date Available	2016-07-31 00:00:00
Creation Date	2015-12-16 10:36:50
Producing Software	Corel PDF Engine Version 17.6.0.1021
Document Lastmod	2015-12-16 10:36:50
Document Title	TempConfidential_User Manual
Document Creator	CorelDRAW X7
Document Author:	Administrator

【The important Instructions should be learned before use】
【The important Instructions should be learned before use】
【The important Instructions should be learned before use】
【Operation Instruction】
【Structure and Instruction】
【Upper Arm Blood Pressure Monitor】
【Instruction of Symbol】
Under the table of Warning and Caution glyph is mainly to
alert the user to the proper and safe use of this product, to
prevent damage caused by misuse or harm the user and
others.
◆ Place the blood pressure monitor display in front of your
【Manual】
◆ Be prepared according to the correct method descriped
earlier.
◆ Click “ ” button, the displayed by default will show the
last user of the measured data after whole was out.
◆ Click: “ ” button, the display shows “0 mmHg” ,
followed by an air pump to inflate the cuff automatically,
after the end of discouraged inflatable exhaust valve
will automatically ladder, in this process, blood
pressure and pulse rate can be measured.
◆ When measurement has been completed, the blood
pressure and pulse data will be displayed on screen.
◆ Take off the cuff, press “ ” button for 5 seconds, the
monitor will be turn off.
★ Note: When the monitor working, the “ ” symbol is
always flashing.
【Emergency stop during measurement】
During the measurement, if the user feels discomfort or
other reasons need to interrupt the measurement, you can
hold down the “ ” button for 5 seconds and then release
it, then the monitor will go off and auto exhaust, and also
can remove the cuff directly.
【Instruction of turn off automatically function】
The monitor with auto turn off function, when the monitor
will turn off automatically after keep 2 minutes still status
at the symbol “ ” flashing.
【Instruction of battery status indicator】
The monitor built-in rechargeable lithium battery, when
the battery power is less than the preset value monitor,
the battery symbol “ ” will be displayed as “red”. If the
default static in the boot under the battery symbol is
displayed as “red”, you need to immediately USB charging
cable and output in the box for DC 5V 1A mobile phone
charger is connected, and then charging cable's small
plug into the machine's USB port for charging, when
charging the battery symbo is displayed as “white” and
“flicker” when the battery symbol to “Always” (about two
hours), indicates that the battery is already full.
Caution: 1.Continuous charging cannot more than a
week, since overcharging may shorten
battery life.
2.If the product willnot be used for a long time,
battery life may be shortened and reduced
performance, it may cause the battery to
malfunction or cause a fire or explosion.
Please read 【the care and maintenance】
3.Please make the USB rubber cover well
kept.
Power/Function Button
Main unit
graphic
symbol
content
Caution Indicates wrong use may cause casualties
Cuff
Notice
eyes, then you can see it easily.
【Proper posture for taking a measurement】
Take off your coat,
sweater or thick clothes,
bare your upper arm or
leave the thin clothes.
Stretch your back
Sit on the chair
Make the centre of the
pressure cuff at the same
height as your heart
Indicates wrong use may cause casualties
Indicates a general prohibition (which does not
allow things)
Indicates a general mandatory (that must comply
with the thing)
Symbol Means BF Application
Symbol Means class II equipment
Take off the USB rubber cover, then you'll find
the USB
interface for charging
Note: please make the USB rubber cover well kept.
A side
【Display】
Electronic Information Products Pollution control
Symbol, indicates safety and environmental
protection use period of the product is 10 years.
【Product Application】
◆ Suitable for: at least 12 years of age or older people
(does not apply to newborns)
◆ Usage: Measuring blood pressure (systolic, diastolic)
and pulse
【Positioning the Pressure Cuff】
◆ Positioning the pressure cuff: “
MX-724BT
Systolic pressure
indicator display
pressure cuff, “
Ver1.0
”Positioning the
”Symbol toward the shoulder.
ELBO W
Upper Arm Blood Pressure Monitor
Quick Start Guide
SHOULDER
Press unit
Diastolic pressure
indicator display
Pulse
symbol
Pulse indicator
display
◆ The blood pressure monitor can be measured in either
upper arm, however, since there is a little difference in
blood pressure between the left and right arms, so be
sure to always use the same arm for measurement.
◆ Approximately 1-2cm from the inside of elbow to the
edge of the cuff
1~2cm
Pulse unit
Thanks for buying our Upper Arm Blood Pressure Monitor
Please read this instruction before use this monitor
Battary status
indicator
Bluetooth status
indicator
◆ Fastness of the cuff and arm: The max gap between the
arm and cuff are not more than one finger width; there
is no gap between the cuff and arm when most tight, but
comfortable cuff is wrapped around the arm.
【Blood pressure status classification standard】
Below is World Health Organization (WHO), the
International Society of Hypertension blood pressure
(ISH) developed classification standards.
Max hypertension
( mmHg )
【Troubleshooting】
Press“ ”button,
the monitor
cannot work
180
Blood pressure
value is
abnormally high
or low
140
130
120
80
B side
85
Causation
90 100 110
Solution
Lowest hypotension
( mmHg )
1 -The most appropriate blood pressure
(Target value)
2 -Normal blood pressure
Measurement
values are
different with
each
measurement
Er1
3 -Normal hypertension
4 -Mild hypertension
Please read the relative
Don't put the monitor and accessories in high
temperatures, high humidity, dust or direct sunlight
environment.
When cleaning the main unit, please wipe it with a soft,
dry cloth, if necessary dampened with water or a
neutral detergent, thoroughly wrung and then wipe, do
not put it into the water to wash or use benzine,
thinner, gasoline, etc. to wipe.
chapter careful
Wear too thick
clothes
Influenced by
environmental factors
Note: Blood pressure is dynamic, so the
results of each measurement has some
differences
Causation
Solution
Over pressure, measurement object measured
data exceeds the measurement range
Er6
When measuring the
detected signal is too
weak
The cuff is wrapped
too loosely or not
wrapped around the
upper arm
Referring to WHO / ISH blood pressure classification
(1999 revised)
Er3
Measurement overtime
Check the cuff for
leaks, then re-test
after have a rest
★ Hypotension has no clear definition, generally think that
Er4
Er2
5 -Moderate hypertension
6 -Severe hypertension
the systolic blood pressure less than 100mmHg
(13.3kPa) for hypotension.
Note: Above symbol is for reference only, please
be sure to accept the doctor's guidance.
System error
Restart the monitor,
then re-test
Er5
Excessive movement
(with signal interference,
etc.)
Please stay quietly
when measured
Er7
Air leakage
Check the cuff is leak
air or not
Er8
Pressure error
Restart and re-test
Caution: Please consult the distributor when faced with the
above conditions or malfunction can not be excluded
in the process of using the monitor.
The cuff balloon containing highly airtight, use caution,
do not fold, pull, twist balloon.
Charging power
Incorrect position
Fault code
【Care and Maintenance】
To avoid damage to the unit by the accuracy and security
measurements, please observe the following:
After each use, please keep the monitor and
accessories tidy and properly placed, avoid strong
force to the unit (such as dropping the unit on the floor).
Battery voltage is
low or exhausted
unstable mood
NoteIn: the following situations, accurate measurements
cannot be correct.
Immediately after exercising or taking a bath; In cold
or hot places; In a moving vehicle.
Within 1 hour of smoking or drinking alcohol, coffee
and black tea.
Incorrect posture, unstable mood during the
measurement.
Taking, moving body, arm, or bend fingures during
the measurement.
Using mobile phone or other sources of
electromagnetic radiation during the measurement
Taking measurement continuously (between two
measurements should be space 2-3 minutes)
Arrhythmia patients may have a greater impact on
the measurement results
NoteIn: For the measurement results do not overly rely
on their own judgment, be sure to accept the
doctor's guidance.
【Care and Maintenance】 【Product specification】
The cuff has been
wrapped incorrectly
160
【Note】
◆ Take measurements while sit in a relax and quiet
environment; before taking measurements, take 2 or 3
deep breaths and relax to stablize blood pressure; also
sit quietly for about 4-5 minutes before taking
measurements.
◆ When measuring elbows on the table, palms up.
◆ Using the same arm to measure your blood pressure at
the same time every day
◆ Please do not let the cuff is inflated long-term
The following table is a common fault and possible error
codes will be displayed in the course may encounter, as
well as causes, exclude the method, if they are consistent
with the situation in use can be handled with reference to
the appropriate method.
Common fault
The best
height of
chair
between
table is
25-30cm
Don't moisten the cuff or don't wash the cuff with water
Don't attempt to disassemble or repair the unit
If the product is not used for above 6 month, please
charging the battery and place it very well. Each 6
month should check the power of the battery, if the
power is exhaust, charging it very well in time.
【Product specification】
1.Technical specification
【Product specification】
Pressure
Resistive pressure sensor
sensor
Pressurization Automatic pressurized inflation
method
Exhaust mode Automatic pressure release, stepped deflation
“ ”symbol is flash, the static time can be 2
Auto turn off
minutes
Measurement From press “ ” button to start the measurement
period
to display the data needs 45 seconds
Battery
Method of
charging
Charging time
Weight
Dimension
Method of
Measurement
Display
Digital LED
Measurement
range
Blood pressure: 20~300 mmHg(2.7~40 kPa)
Pulse: 40~199/min
Accuracy
Equipment
operation
mode
Electrical
safety
classification
Device type
Oscillographic system
Blood pressure: ±3 mmHg(±0.4kPa)
Pulse: ±5% of display reading
Intermittent operation mode
Symbol Means BF Application
Symbol Means class II equipment
built-in 3.7V 800mAh rechargable Li battery
With output DC5V/1A USB Cable for charging
About 2 hours
The main unit + cuff +Li battery total is approx:
(Approx)263g
Main unit: (Approx) 140.5 length x 56.3 width x 33
height (mm)
Arm dimension 25~36cm
Note: The above specifications are subject to change
重度⾼⾎压
without notice.
2.Operation/transportation/ storage environment
中度⾼⾎压
Operation
Environment
Operation temperature : +5~+40℃,
Humidity: 15%~80% RH,
Atmospheric pressure:80~105 kPa,
avoid electromagnetic interference, vibration,
dust, noise and large environment
Transportation
and storage
environment
Temperature: -20~+55℃,
Humidity: 15%~80% RH,
No cold agglutination phenomenon,
Atmospheric pressure: 80~105 kPa,
avoid high temperatures, high humidity,
direct sunlight, dusty, and causticity gas
conditions, and may shake, bump environment
Product Name Upper Arm Blood Pressure Monitor
Product Model MX-724BT
No.
★Guide of operation under electromagnetic environment
When the monitor works with other devices may cause
electromagnetic interference, if interference phenomena
occur when you use them, you should check the work
environment to identify sources of interference and take
the following measures to eliminate the interference:
◆ Changing the direction of the interference device
◆ Increase the interference between the device and the
monitor
◆ Close the interference device
changes or modifications not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
If this equipment does cause harmful interference to radio
or television, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interfrence by one or more of the following
measures:
-Reorient or telocate the receiving antenna.
-Increase the separatio between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help.
Portal 724, LLC
275 Hartz Way, Suite 105, Secaucus, NJ 07094 U.S.A
Size：375X140 mm
Note: Instructions for the folding tail A plane is the B-side of the head

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2015:12:16 10:36:50+08:00
Modify Date                     : 2015:12:16 10:36:50+08:00
Producer                        : Corel PDF Engine Version 17.6.0.1021
Author                          : Administrator
Creator                         : CorelDRAW X7
Title                           : 快速使用指南-英文版-1.cdr

EXIF Metadata provided by EXIF.tools