Posiflex Technology PBT8461022 Bluetooth V2.0 class II module User Manual

Posiflex Technology, Inc. Bluetooth V2.0 class II module Users Manual

Users Manual

Bluetooth TMModule Caution: This user guide information is only provided to OEM or module installer. Do not supply to end user. Connect Your Peripherals and Computing Devices without Cables Model no. PBT8461022 (1).Introduction The PBT8461022 with Bluetooth TM Wireless Technology is a Radio device that transmits And receives radio signals in accordance with the spectrum regulations for the 2.4GHz Unlicensed frequency range. The following table shows a major function. 1-1 Standard: Bluetooth V2.0 Frequency Band: 2.402GHz~2.480GHz unlicensed ISM band Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum) Modulation Method: GFSK (Gaussian Frequency Shift Keying) RF Output Power: Class II, >0dBm Antenna: External Antenna Working Distance: Max, 20min free space Sensitivity: <0.1%BER at-80dBm Power Consumption: TX Typical: 40mA I/O Interface: RX Typical: 300mA Chip Set: CSR BC04 Voltage Range: 3.3V+- 0.3V Supported Bluetooth Profiles (option): SPP, HID, Headset, Headsfree Application: GPS, Remote, Control 1-2 PC System Requirements ·PC-compatible computer, CPU speed of 200MHz or above ·Memory: 64MB or above, 128MB recommended ·One available USB port, USB 1.1 standard ·Windows®98 SE,Me,2000,and XP 1-3 Product Contents ·Bluetooth USB Adapter ·CD-ROM for installation software and documentation ·Quick Installation Guide (2).Radio Part Bluetooth TM Transceiver Module, model has fully integrated 2.4GHz radio transceiver With Class2 power, receiver and frequency-hopping synthesizer
(3).Base band Part Bluetooth TM Transceiver Module contains link controller, which performs all the real-time Functions of the Bluetooth TM base band protocol layer, including data transfer and connection management The device also controls states of operation enables sniff, park and hold modes of operation Real-time functions such as frequency-hopping burst timing and clock synchronization are also implemented in this hardware Further Processing is required to format the data into the Bluetooth TM packet format before it may be applied to the GFSK modulator On the receive side the controller performs error correction and de-scrambling before de-packetizing the incoming payload and storing it in RX buffers Step1.: Software Setup Software Setup for Windows 98 SE, Me, 2000, and XP To install the software for the USB Adapter , follow the instructions below: Note: the installation Process for windows XP may look slightly different from windows 98 SE, Me, and 2000 Note: DO not insert the USB Adapter into the USB port prior to software installation 1. Insert the software installation CD-ROM into the PC’s CD-ROM drive 2. The “Software Installshield Wizard” Windows appears. Click on “Next” to begin the Installation Process.
End Product Labeling: The final end product must be labeled in visible area with the following: Contains TX FCC ID: V93PBT8461022

Navigation menu