Posiflex Technology PBT8461022 Bluetooth V2.0 class II module User Manual
Posiflex Technology, Inc. Bluetooth V2.0 class II module Users Manual
Users Manual
Bluetooth
TM
Module
Caution: This user guide information is only provided to OEM or module installer.
Do not supply to end user.
Connect Your Peripherals and Computing Devices without Cables
Model no. PBT8461022
(1).Introduction
The PBT8461022 with Bluetooth
TM
Wireless Technology is a Radio device that transmits
And receives radio signals in accordance with the spectrum regulations for the 2.4GHz
Unlicensed frequency range. The following table shows a major function.
1-1
Standard: Bluetooth V2.0
Frequency Band: 2.402GHz~2.480GHz unlicensed ISM band
Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)
Modulation Method: GFSK (Gaussian Frequency Shift Keying)
RF Output Power: Class II, >0dBm
Antenna: External Antenna
Working Distance: Max, 20min free space
Sensitivity: <0.1%BER at-80dBm
Power Consumption: TX Typical: 40mA
I/O Interface: RX Typical: 300mA
Chip Set: CSR BC04
Voltage Range: 3.3V+- 0.3V
Supported Bluetooth Profiles (option): SPP, HID, Headset, Headsfree
Application: GPS, Remote, Control
1-2 PC System Requirements
·
PC-compatible computer, CPU speed of 200MHz or above
·
Memory: 64MB or above, 128MB recommended
·
One available USB port, USB 1.1 standard
·
Windows
®
98 SE,Me,2000,and XP
1-3 Product Contents
·
Bluetooth USB Adapter
·
CD-ROM for installation software and documentation
·
Quick Installation Guide
(2).Radio Part
Bluetooth
TM
Transceiver Module, model has fully integrated 2.4GHz radio transceiver
With Class2 power, receiver and frequency-hopping synthesizer
(3).Base band Part
Bluetooth
TM
Transceiver Module contains link controller, which performs all the real-time Functions of the
Bluetooth
TM
base band protocol layer, including data transfer and connection management
The device also controls states of operation enables sniff, park and hold modes of operation
Real-time functions such as frequency-hopping burst timing and clock synchronization are
also implemented in this hardware Further Processing is required to format the data into the
Bluetooth
TM
packet format before it may be applied to the GFSK modulator On the receive
side the controller performs error correction and de-scrambling before de-packetizing the
incoming payload and storing it in RX buffers
Step1.: Software Setup
Software Setup for Windows 98 SE, Me, 2000, and XP
To install the software for the USB Adapter , follow the instructions below:
Note: the installation Process for windows XP may look slightly different from windows 98
SE, Me, and 2000
Note: DO not insert the USB Adapter into the USB port prior to software installation
1.
Insert the software installation CD-ROM into the PC’s CD-ROM drive
2.
The “Software Installshield Wizard” Windows appears. Click on “Next” to begin the
Installation Process.
End Product Labeling:
The final end product must be labeled in visible area with the following:
Contains TX FCC ID: V93PBT8461022