Power Idea Technology RG310 WCDMA Digital Mobile Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3096804
Application ID	3vfgJGTODHxL437jnwMhPw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.06kB (2600784 bits)
Date Submitted	2016-08-12 00:00:00
Date Available	2016-08-15 00:00:00
Creation Date	2016-08-08 13:14:02
Document Lastmod	2016-08-08 13:14:02
Document Title
Document Creator	WPS Office 专业版
Document Author:	EEDSZ3208

gm.“
@® ®
@ ®®®®®
®@@ ©
®®
®
lmoduellone
Customizable shortcul key
Torch
Receiver
From Iell to right: front camera, light sensor, distance sensor
Screen
Menu key~ Home key
Torch shortcut key
Answer key
Navigatlon
SOS
Back
Delete key
Power key ‘ Hang up key
Numeric key
0K
USB port
Volume up and down key
Desk top charger port
flashlight
banery cover screw
speaker
©®®©©©®®®®©©®©Q®©®®©©®E
lanyard hole
Note:
1. SOS is used for “one-bunon alann' function
2. You can long press " key to unlock &he screen
card/Micro SD card
stallatlon and remove
the back cover
flue device SIM card slot is the conventional
standard micro SIM card slot. Slot 1 and 2
can support both GSM and WCDMA SIM
card.
Please follow the steps mentioned below to
install the memory card in the device:
a 1. Open the screw lock according to the
picture direction
I 2. Press the SIM or SD card metal cover
and move to open the cover. Put the
SIM/SD card metal side down to the slot.
! 3. follow the picture guide to insert the
battery cover and lock the cover with
screws.
‘Jte :
a 1. After installation is complete, be sure
to tightly cover the battery. Tighten the
Battery cover screw lock, to avoid water
damage or dirt from entering the mobile
phone.
v 2. Please try to use the phone's original
data cable and adapter, or RugGear’s
approved data cable for the phone to
charge.
‘35: Insert / Remove the memory card:
To store additional multimedia information,
you must insert a memory card, the device
can only accept up to 64GB Micro SD
memory card.
Please make sure to remove the memory
card in safe circumstances.
lddance
! 1. Please make sure the back cover
screw lock, headphones and USB plug
and all rubber cover are tightly closed, in
order to have perfect dustproof and
waterproof effect. Be sure to close a
battery cover (specific reference in front of
the battery back cover installation
method) .
O 2. Do not immerse the phone in water.
v 3. Do not expose your phone in the water
dynamics such as waves or waterfalls.
v 4. Do not expose the equipment to salt
water, ionized water or soapy water.
! 5. Do not use the phone in the spa or hot
water because waterproof rubber is easily
affected by high temperature.
v 6. Please do not use wet hands to open
the battery cover. When open it, you must
put the cover down in case water goes into
the cover slot.
fl 7. Do not immerse the phone in water or in
extremely wet conditions when opening the
back cover. (such as swimming or shower)
I 8. Do not open the battery cover while
the body is not completely dry.
I 9. Do not use detergent cleaning products
and other chemicals.
4 10. Rubber seal stoppers in the battery
cover are an important part of the device.
Please be careful to avoid damaging it
when you open or close the battery cover.
Also, make sure there is no debris, such
as sand or dust on the rubber seal.
v 11. If the device is dropped or subjected
to impact, the battery cover and
multifunction jack cover may be loose.
Ensure that all covers are properly aligned
and tightly closed.
a 12. Under certain conditions, such as
high volume levels, it may be slightly
vibrated. It is normal due to waterproof
design and does not affect the performance.
v 13. If you accidentally drop your phone
in the quagmire, do not worry, just flush it
with clean water and dry it.
a 14 .If you accidentally drop your phone
on the beach, do not worry, just flush it with
clean water and dry it.
v 15. If the device is immersed in water or
wet microphone or speaker, during a call,
the other party may not be able to hear your
voice, so wipe with a dry cloth to make sure
the microphone or speakers are clean and
dry. Hair dryer is not permitted.
a 16. If water droplets are found on the
screen, it may affect the perception of the
touch screen resulting in errors.
Recommend to continue to use the phone
after drying the water droplets.
‘bout Phone - the default pass code
To ensure the privacy of your phone, we set
a pass code to protect it.After entered the
setting function required a password, the
default pass code is 1234.At the same time,
users can go "Settings - Security -
password change" to modify the default
password or users close this function by
themselves.
rging the battery
The first time you use your phone, please
run out of power first, and then charge the
battery until it is fully charged.
Please try to use the phone's original data
cable and adapter, or RugGear approved
data cable for the phone to charge.
Unqualified charger or USB cable may lead
to the device explosion.
When the battery is low, the device will emit
a warning tone and a low battery message
prompts. The battery icon Iwill appear
blank. If the battery is too low, the phone will
automatically shut down. Need to charge
the battery in order to continue to use the
phone.
If the battery is completely discharged, even
if the connection on the travel charger.
cannot turn on the device. Before
attempting to turn on the device, please
charge a few minutes first.
rging Travel Charger
v 1. Please open rubber plug according to
the following right direction, before Inserting
the headset or data cable.
The travel charger is not connected
properly may result in serious damage to
mobile phones. For any damage caused
due to misuse, is not in the warranty scope.
To save power, unplug the device when not
in use travel charger.Adapter shall be
installed near the equipment and shall be
easily accessible.
mlng
1)This device complies with Industry Canada
10
license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference.
and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
Le present appareil est conforme aux CNR
d‘lndustrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectn'que subi,
méme si le brouillage est susceptible d'en
oompromettre le fonctionnement.
2)User manuals for transmitters equipped
with detachable antennas shall also contain
the following notice in a conspicuous location:
This radio transmitter (identify the device by
certification number or model number if Category II)
has been approved by Industry Canada to operate
with the antenna types listed below with the maximum
permissible gain indicated. Antenna types not included
in his list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for
11
tuse with this device.
Immediately following the above notice, the
manufacturer shall provide a list of all
antenna types approved for use with the
transmitter, indicating the maximum
permissible antenna gain (in dBi).
3)This Class [B] digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B est
confonne a la nonne NMB-003 du Canada.
— Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
12
l/////////////////////////
:______,___,_,_:____
end battery llfe
To save power, you can:
i 1. When not using Bluetooth, Wi-Fi or
GPS, please close these wireless
communication function;
! 2. Lowering the phone screen brightness
and setting a shorter sleep time can save
power. You can press the power button to
turn off the screen when not using the
device;
I 3. Closing Email, calendar and contacts,
and other applications of automatic
synchronisation; Long pressing the HOME
main menu button, selecting the icon and
dragging left or right to slide to disappear;
' 4. Your installation and use of some of
the applications may shorten battery life,
please exit used applications or long
press the menu button to view the used
application list and slide left/right to exit.
' 5.CAUTION : Risk of explosion if battery
is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
13
ty Information
‘ protect yourself and others from harm,
please read all of the following information
before using your mobile phone.
a Do not put the device in hot or cold
places.
o Do not put the phone inside the heater,
microwave, cooking equipment or high
pressure vessel.
0 Do not touch the phone or charger when
the phone is charging with wet hands.
O Do not use the phone in outdoor
thunderstorm weather.
i In a potentially explosive environment,
gas station, etc., please turn off the
phone.
I When using the phone at a restricted
area, please observe all safety warnings
and regulations.
0 Please abide by all the relevant safety
warnings and regulations of using mobile
phones while driving.
! Please turn off the phone while flying.
14
a Do not use the phone in the occasion
where is easily affected by radio frequency
interference like hospitals and so on.
v If possible, avoid the use of mobile
phones within 15cm range from the
pacemaker. The reason is the phone may
interfere with pacemakers.
f If you must use the phone, please keep a
distance of at least 15cm with pacemaker.
Please use the phone at the other side of the
body or opposite the pacemaker in order to
reduce the interference with the pacemaker.
! If you use a hearing aid, please
contact with the manufacturer about
radio interference information.
I If you use other medical devices, please
contact with the device manufacturer before
using this medical device to determine
whether the equipment will be affected by
this phone emitted radio frequencies.
I Do not allow children or animals to bite,
chew, or suck the phone or battery.
! Do not touch the multifunction jack and
battery electrode with conductive elements of
15
metal or liquids.
a Do not use the flash or lights when
approaching human or animals eyes.
a Do not use high-volume to listen to long
conversation or music, so as not to damage
your hearing.
a Do not disassemble, modify or repair the
phone.
Do not approach other handset
manufacturers for any changes or
modifications or this will void the warranty.
For service, please contact with after-sales
service department of RugGear or your
local dealer.
a Only qualified service personnel can
repair phones.
0 Operating temperature: 0 C ~+40 'C.
i The product contains a re-changer
battery, the charging voltage4.3V.The
device contain a power adapter, charging
temperature is 0 'C ~+40 'C.
v Caution risk of explosion if battery is
replaced by an incorrect type. Dispose used
batteries according to the instructions.
16
0 Excessive sound pressure from
earphones and headphones can cause
hearing loss.
(u
claimer
All content and services available through this
device belong to third parties and is protected
by copyright, patent, trademark and other
intellectual property laws, such content and
services for personal, non-commercial use
only. In the absence of obtaining license from
content owner or service provider, you may
not use any content or services.
In addition to the above limitations, unless
expressly permitted by the application
content or service providers, otherwise, any
content or service this equipment displays,
you may not modify, copy, republish,
upload, post, transmit, translate, sell , create
derivative works, exploit, or distribute in any
way.
17
Third-party content and services as is
available. Regardless, for any purpose,
RugGear does not provide any express or
implied warranties for the provided content
or service. RugGear explicitly stated, does
not undertake any implied warranty and
terms or conditions accepted by laws and
regulations Common law or in any other
way including but not limited to the
applicability of the merchantability or for a
specific purpose.
The third-party service may at any time to
stop or interrupt,RugGear is not responsible
for any period of time when the content or
services is available. Content and services
are transmitted by third parties through the
network and transmission equipment
outside the control of RugGear In addition to
the generality of this exceptions clause,
RugGear makes it clear that our company is
not responsible for any interrupt and delay
of any content or service applicable for this
device.
RugGear involving content and services are
18
neither responsible nor liable. Any content or
services related services should be made
directly by the content and service providers.
cific Absorption Rate
AR)
‘ur equipment radiation standard unit of
measurement is known as specific absorption
rate (SAR).The SAR limit of Europe is 2.0
W/kg. Device types RG310 has also been
tested against this SAR limit. The highest
SAR value reported under this standard
during product certification for use at the ear
is 0.606W/kg and when properly worn on
the body is 0.479W/kg. This device was
tested for typical body-worn operations with
the back of the handset kept 1.0cm from the
body. To maintain compliance with RF
exposure requirements,use accessories that
maintain a 1.00m separation distance
between the user's body and the back of the
handset.The use of belt clips, holsters and
similar accessories should not contain
metallic components in its assembly.The
use of accessories that do not satisfy these
19
requirements may not comply with RF
exposure requirements, and should be
avoided.
‘Jring use, the actual SAR values for this
device are usually well below the values
stated above. This is because, for
purposes of system efficiency and to
minimize interference on the network,
Organizations such as the World Health
Organization and the US Food and Drug
Administration have suggested that if
people are concerned and want to reduce
their exposure, they could use a hands-free
accessory to keep the wireless device
away from the head and body during use,
or they could reduce the amount of time
spent using the device.
This symbol on your telephone, the
battery and the accessories means
that these products must be taken to
— collection points at the end of their life.
Regulatory Conformance Hereby, Power
Idea Technology (Shenzhen) Co., Ltd.
declares that this device is in compliance
with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
(60700
20
‘anges or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
This equipment complies with Fcc
radiation exposure limits set forth for an
uncontrolled environment. End user must
follow the specific operating instructions for
satisfying RF exposure compliance. This
transmitter must not be co—located or
operating in conjunction with any other
antenna or transmitter.
The mobile device is designed to meet the
requirements for
exposure to radio waves established by the
Federal Communications
Commission (USA). These requirements set
a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The
highest SAR value reported under
this standard during product certification for
use when properly worn on the body is
0.648W/kg.
For body worn operation, this device has been
tested and meets FCC/1C RF exposure guidelines
when used with any accessory that contains no
metal and that positions the handset a minimunl of
15mm from the body. Use of other accessories may
not ensure compliance with FCC/1C RF exposure
21
‘DTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However,there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving
antenna.
-- Increase the separation between the
equipment and receiver.
22
Supreme Quick Start‘Manual /
, \
Ruse-car
6‘1 - S O S f >
E C
I“: 2m 3m
4w 5,.” 6m
7m, BTW

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 24
Create Date                     : 2016:08:08 13:14:02+00:00
Modify Date                     : 2016:08:08 13:14:02+00:00
Title                           : .
Author                          : EEDSZ3208
Creator                         : WPS Office 专业版

EXIF Metadata provided by EXIF.tools