Power System Electronic Technology 22050 Sherpa 100 AC 110V User Manual user manual

Power System Electronic Technology Co., Ltd. Sherpa 100 AC 110V user manual

user_manual

Download: Power System Electronic Technology 22050 Sherpa 100 AC 110V User Manual user manual
Mirror Download [FCC.gov]Power System Electronic Technology 22050 Sherpa 100 AC 110V User Manual user manual
Document ID3972196
Application IDjBgXzQivE42FiViYayVbLg==
Document Descriptionuser_manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize69.22kB (865302 bits)
Date Submitted2018-08-21 00:00:00
Date Available2018-08-21 00:00:00
Creation Date2018-08-07 09:35:42
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-08-07 09:36:17
Document Titleuser_manual
Document CreatorAdobe InDesign CC 13.1 (Macintosh)

CHARGE ME NOW
Make sure your Goal Zero Sherpa 100AC is fully charged before using or
storing. Keep your Goal Zero Sherpa 100AC plugged in when not in use.
IMPORTANT NOTE: When solar recharging your Sherpa 100AC, take note of
the voltages of the solar panels and do not exceed 22V. Individual solar panels,
or solar panels chained in series in excess of 22V cannot be used with the Goal
Zero Sherpa 100AC and can cause serious damage to the unit. For help on
chaining solar panels, call our Customer Solutions Center at 888-794-6250.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions and cautions carefully before use to avoid personal
injury or damage to the unit and any connected products
Observe all Input/Output connectors ratings: To avoid fire or electrical
shock hazard, observe all ratings on unit, and products you intend to
use; check manuals for more information.
Use in a ventilated area: Ensure proper ventilation while in use and do
not obstruct fan openings on unit. Inadequate ventilation may cause
damage to the unit. During storage do not stack anything on top of unit.
DO NOT operate in wet conditions: In order to avoid short circuits or
electric shock do not allow unit to get wet. Let unit dry completely
before using.
Keep the unit clean and dry: Inspect the unit for dirt, dust, or moisture
on a regular basis.
Shock or Fire Hazard: This Sherpa 100AC generates the same
potentially lethal AC power as a normal household wall outlet. Please
use it carefully just like using a normal AC outlet on the wall.
DO NOT insert foreign objects into outputs or ventilation holes.
Any manipulation to the unit or its components will void all warranties.
Table of Contents
Get To Know Your Gear
Charging Your Sherpa
Using Your Sherpa
Troubleshooting
2-3
5-11
12-14
Technical Specifications
15
Français
16
Deutsch
30
Español
44
GET TO KNOW YOUR GEAR
Cable Storage
Bidirectional (input/
output) USB-C Power
Delivery Ports
5V/9V/12V/15V/20V,
up to 3A (60W max) each
8mm DC Input
For solar, AC, or 12V
charging (50W max)
(AC charger and 12V
charger sold separately)
Qi Wireless Charging
Pad (5W max)
Cable Storage
USB-A Ports
Each Port
5V, up to 2.4A
(12W max)
Interactive OLED
Display + Buttons
Real-time port
information and
product detail pages
AC Inverter
100W modifiedsine wave
(150W surge)
Included Cables:
USB-C to USB-A
USB-C to USB-C
Micro-USB to USB-A
Lightning® to USB-A
CHARGING YOUR SHERPA
CHARGE ME NOW: Plug in and charge up before first use. The Sherpa has
multiple inputs to choose from, 8mm DC for AC wall outlet and solar charging,
and USB-C Power Delivery (60W Max).
FROM USB: Using the included USB-C cable and one of the USB-C Power
Delivery (PD) ports on the Sherpa, plug into a USB port. We recommend using
at least a 2.4A charger for a full charge in about 9 hours. You can also plug
into a USB-C PD charger (up to 60W max) for a faster recharge.
*TECH TIP: Since USB-C PD ports are bidirectional, it’s possible to
charge in and charge out from the same port. In the Product Detail pages
of the Sherpa, you can select a default function (auto, input, output) for
each USB-C PD port.
FROM SOLAR: Pair the Sherpa with a Nomad or Boulder Solar Panel and
charge up from the sun using the 8mm input. For the best solar charging
experience, we recommend the Nomad 28 Plus Solar Panel or higher.
FROM AC or 12V: Looking to charge up from AC wall outlet or 12V?
Accessories are available from GoalZero.com. Give our customer solutions
center a call for help at 888-794-6250.
HOW IT WORKS
Wall Outlet
Sherpa 100AC
Power Bank
Lights
Cameras
Nomad 28 Plus
Solar Panel
Phones, Tablets,
Laptops
USING YOUR SHERPA
BUTTONS:
Press once to turn the Sherpa on/off. Press and hold to reset the
Sherpa, watt-hour counter, and restore default settings of all ports.
Select/Scroll through settings.
Press once to view output screen. Press and hold to enable
product detail pages.
Turn Qi wireless charging on/off.
Turn AC port on/off.
INTERACTIVE SCREENS:
Main Page:
1.
1.
3.
2.
4.
Time to Empty/Full – How long the Sherpa will last at its current
power draw or how long it will take to fully charge.
2.
Power (Watts) In/Out – Longer arrows indicate the bigger power
draw. A blinking arrow indicates nearing power draw maximum.
3.
Icons - Wireless charging, AC Inverter, Over Temperature
Warning
4.
Battery Level
USING YOUR SHERPA
INTERACTIVE SCREENS:
Outputs Page:
Access by pressing
•
The Output Page shows real-time information for each port,
including inputs and outputs.
•
A solid bar indicates the port is functioning as an output.
A lined bar indicates the port is functioning as an input to
charge the Sherpa.
•
Ports are listed from left to right.
•
Total wattage for all outputs is listed at the bottom of
the screen.
*TECH TIP: If you have the Sherpa plugged into a high power
source to charge it, you might notice the max wattage
available increase.
USING YOUR SHERPA
INTERACTIVE SCREENS:
Product Detail Pages:
Access by pressing and holding
Scroll through pages by pressing
•
A watt-hour output/input counter to monitor power consumption
between resets.
•
Press and hold
•
Real-time information on the 8mm input.
•
Check this page when charging from solar to help with panel
to reset the counter.
alignment toward the sun.
USING YOUR SHERPA
INTERACTIVE SCREENS:
Product Detail Pages:
Access by pressing and holding
Scroll through pages by pressing
•
Shows output or input information for the bidirectional USB-C
Power Delivery ports.
•
Customize the USB-C Power Delivery ports to specific
functions by pressing
•
AUTO: Default setting for both ports will automatically
detect if a device is plugged in for charging or if the port
is being used to charge the Sherpa.
•
INPUT: This port will now only function as a way to
charge the Sherpa.
•
OUTPUT: This port will now only function as a way to
charge other devices.
•
Real-time information for both USB-A ports.
USING YOUR SHERPA
INTERACTIVE SCREENS:
Product Detail Pages:
Access by pressing and holding
Scroll through pages by pressing
•
Real-time information on the AC output.
•
Customize the setting of the AC inverter by pressing
the
•
AUTO TIMEOUT: Default setting will shut the
AC inverter off after 5 minutes of inactivity to
save on power.
•
NO TIMEOUT: Inverter will remain on until the
Sherpa is turned off, the battery is drained, or
AC button pressed.
USING YOUR SHERPA
INTERACTIVE SCREENS:
Product Detail Pages:
Access by pressing and holding
Scroll through pages by pressing
10
•
Real-time information on the internal battery.
•
Firmware and manufacturing date for the Sherpa.
•
Detailed usage information for the Sherpa.
USING YOUR SHERPA
TIPS for LAPTOP CHARGING via USB-C PD:
We recommend using a USB-C to USB-C cable when recharging enabled
laptops. Since USB-C PD ports are bidirectional, meaning they can
function as an input to charge the Sherpa or an output to charge other
devices, plugging in a laptop may cause the Sherpa to try charging from
the laptop’s internal battery, rather than charging the laptop. To fix this,
select a default input or output setting from the USB-C PD Product Detail
Page or try reconnecting the laptop.
PASSTHROUGH CHARGING:
It is possible to recharge other devices while the Sherpa is being
charged. Plug the Sherpa into a power source and make sure it’s still
powered on, then plug the phone/laptop/tablet or other device into the
Sherpa. Make sure to watch the output levels on the ports to ensure the
Sherpa is pulling enough power to meet the power demands of what is
plugged in.
*TECH TIP: If TIME TO EMPTY is displayed on the screen, the
Sherpa will not have enough power to recharge. If TIME TO FULL
is displayed, the Sherpa is pulling enough power to charge what’s
plugged in and itself.
11
TROUBLESHOOTING
Drawing Too Much Power
•
The Sherpa can output 170W by utilizing all its ports at once.
If that draw is exceeded, the Sherpa will stop working and this
screen will be displayed.
*TECH TIP: If the Sherpa is charging from a high enough
power source, you can achieve a higher max output.
•
To avoid this shutdown, monitor power usage on the Main Page
and Outputs Page and closely monitor what is being plugged in.
•
The arrow on the Main Page indicating power out will begin to
blink if the Sherpa is nearing shutdown.
Output Failure
•
This indicates an issue with a specific output on the Sherpa. To
correct this issue:
•
Unplug the device from the Sherpa and check its technical
specifications to ensure it isn’t pulling too much power.
The FAIL warning will remain if the device plugged in is not
compatible.
•
Turn the Sherpa off and on to reset the FAIL notice.
•
If the FAIL notice continues, call Goal Zero’s customer
service at 888-794-6250.
•
12
The remainder of the Sherpa ports will continue to work.
TROUBLESHOOTING
Overheating
•
The Sherpa is too hot and needs to cool down before it can be used
again.
•
To avoid this shutdown, monitor the Main Page for the temperature
warning icon.
•
When using the AC port, do not block the fan on the back of
the Sherpa.
•
When charging, allow the Sherpa to have proper ventilation.
Resetting the Sherpa
•
Press and hold
•
Continue holding
for 3 seconds to initiate reset.
•
NOTE: this resets the Sherpa, watt-hour counter, and restores
for 8 seconds until the main page is shown.
default settings on all ports.
13
TROUBLESHOOTING
Low Battery
•
The Sherpa’s battery capacity has dropped to 2% and can no
longer provide power.
•
Plug the Sherpa in and wait for it to reach at least 5%
charge before attempting to use.
14
TECHNICAL SPECIFCATIONS
Sherpa 100AC
Charge times:
Ports:
USB-C PD Source
(60W)
2.5 hrs
Wall charger
(45W)
3 hrs
USB-A (2.4A)
9 hrs
Nomad 14
14-28 hrs
Nomad 28
7-14 hrs
Boulder 50
4-8 hrs
Battery:
Wireless Qi (output)
5W max
USB A ports (output)
5V, up to 2.4A (12W
max), regulated
USB-C PD ports
(input/output)
5V,9V,12V,15V,20V
up to 3A (60W max),
regulated
AC inverter US
(output)
110V, up to 0.9A
(100W max), 60Hz,
modified sine wave
AC inverter Int
(output)
220V, up to 0.45A
(100W max), 50Hz,
modified sine wave
Solar charging port
(input, 8mm diameter)
14-22V (50W max)
Cell chemistry
Li-ion NMC
Cell type
18650 by LG chem
Single Cell Equivalent
Capacity
25600mAh @ 3.7V
Lifecycles
Hundreds of Cycles
Chainable
no
Shelf-life
Charge every 3-6
months
Weight
2.0 lbs (898 g)
Dimensions
7.5 x 1.0 x 5.68 in
(19.0 x 2.54 x 14.4
cm)
Operating usage
temp.
32-104F (0-40C)
Management
system
Charging and lowbattery protection
built-in
General
Certs
Warranty
12 months
Be sure to activate your warranty at goalzero.com/warranty
15
16
RECHARGEZ-MOI MAINTENANT
Avant de l'utiliser ou de le stocker, branchez votre Goal Zero Sherpa 100AC sur
une prise murale jusqu'à ce qu'il soit complètement chargé. Gardez votre Goal
Zero Sherpa 100AC branché lorsqu'il n'est pas utilisé.
REMARQUE IMPORTANTE : Lors de la recharge grâce à l'énergie solaire de votre
Goal Zero Sherpa 100AC, gardez un œil sur les tensions des panneaux solaires et
à ne pas dépasser 22V. Les panneaux solaires individuels, ou panneaux solaires
enchaînés en série au-dessus de 22V ne peuvent pas être utilisés avec la Goal Zero
Sherpa 100AC et peuvent causer des dommages sérieux à l'appareil. Pour obtenir
de l'aide sur le chaînage des panneaux solaires, appelez notre Centre de Solutions
pour nos Clients au 888-794-6250.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Lisez toutes les consignes et mises en garde avec soin avant toute utilisation
pour éviter d'éventuelles blessures corporelles ou des dommages sérieux à
l'appareil ou tout autre appareil connecté
Respectez toutes les puissances nominales des connecteurs d'Entrée/Sortie
: Pour éviter tout risque d'incendie ou d'électrocution, observez toutes les
indications de puissance nominale sur l'unité et celles des produits que vous
souhaitez utiliser ; Vérifiez leurs manuels respectifs pour plus d'informations.
À utiliser dans un espace bien ventilé : Assurez une ventilation adéquate pendant
son utilisation et n'obstruez jamais les ouvertures du ventilateur de l'appareil. Une
ventilation inadéquate peut endommager l'appareil. Ne jamais empiler quoi que ce
soit sur l'appareil, lors de son stockage ou en cours d'utilisation.
NE PAS faire fonctionner dans des conditions humides : Afin d'éviter les courtscircuits ou les chocs électriques, ne permettez pas à l'appareil de devenir mouillé.
Laissez l'appareil sécher complètement avant de l'utiliser à nouveau.
Gardez l'appareil propre et sec : Inspectez régulièrement l'appareil pour la saleté,
la poussière ou l'humidité.
Risque de choc ou d'incendie : Ce Sherpa 100AC génère la même puissance
électrique potentiellement mortelle qu'une prise murale domestique normale.
Utilisez-le avec autant de précaution que lors de l'utilisation d'une prise
secteur murale.
NE PAS insérer d'objets étrangers dans les sorties électriques ou les trous
de ventilation.
Toute manipulation sur l'unité ou ses composants annulera toutes les garanties.
17
APPRENDRE À CONNAÎTRE VOTRE ÉQUIPEMENT
Stockage
du câble
Ports d'alimentation
USB-C bidirectionnels
(entrée/sortie)
5V/9V/12V/15V/20V,
jusqu'à 3A (60W max)
chacun
Entrée DC de 8 mm
Pour recharge solaire,
CA ou 12V (50W max)
(Chargeurs CA et 12V
vendus séparément)
18
Station de recharge
sans fil Qi (5W max)
Stockage
du câble
Ports USB-A
Chaque port
5V, jusqu'à 2,4A
(12W max)
Écran OLED +
Boutons Interactifs
Informations sur le port
en temps réel et pages
de détails du produit
Onduleur CA
de 100W à onde
sinusoïdale
modifiée
(surtension
150W)
Câbles inclus :
USB-C vers USB-A
USB-C vers USB-C
Micro-USB vers USB-A
Lightning® vers USB-A
19
CHARGER VOTRE SHERPA
RECHARGEZ-MOI MAINTENANT : Branchez et rechargez-le avant sa première utilisation.
Le Sherpa a plusieurs entrées au choix, 8 mm DC pour une recharge via prise murale et
recharge solaire et par distribution d'énergie via USB-C (60W Max).
VIA USB : À l'aide du câble USB-C fourni et l'un des ports USB-C de distribution d'énergie
du Sherpa, branchez-le sur un port USB. Nous recommandons d'utiliser au moins un
chargeur de 2,4A pour une charge complète en 9 heures environ. Vous pouvez également
brancher un chargeur USB-C de distribution d'énergie (jusqu'à 60W max) pour une recharge
plus rapide.
*CONSEIL TECHNIQUE : Comme les ports USB-C de distribution d'énergie sont
bidirectionnels, il est possible de recharger et de charger depuis le même port. Dans
les pages Détails du produit de votre Sherpa, vous pouvez sélectionner une fonction
par défaut (auto, entrée, sortie) pour chaque port USB-C.
VIA ÉNERGIE SOLAIRE : Associez votre Sherpa à un panneau solaire Nomad ou Boulder
pour le recharger à partir de l'énergie solaire en utilisant l'entrée de 8 mm. Pour une
meilleure expérience de chargement solaire, nous recommandons le panneau solaire
Nomad 28 Plus ou tout modèle supérieur.
VIA CA ou 12V : Vous cherchez à le recharger depuis une prise murale ou du 12V ? Des
accessoires sont disponibles sur GoalZero.com. Appelez notre centre de solutions pour
nos clients au 1-888-794-6250.
COMMENT ÇA FONCTIONNE
Prise secteur murale
Chargeur
Sherpa 100AC
Lampes
Caméras
Panneau Solaire
Nomad 28 Plus
20
Téléphones,
Tablettes et
Ordinateurs
portables
UTILISER VOTRE SHERPA
BOUTONS :
Appuyez une fois pour allumer/éteindre le Sherpa. Maintenez cette touche
enfoncée pour réinitialiser le Sherpa, le compteur watt-heure et restaurer
les paramètres par défaut de tous les ports.
Sélectionner/Faire défiler les paramètres.
Appuyez une fois pour afficher l'écran des sorties. Appuyez et maintenez
pour activer les pages de détails du produit.
Activer/Désactiver la recharge sans fil Qi.
Activer/Désactiver le port CA.
ÉCRANS INTERACTIFS :
Page principale :
1.
1.
3.
2.
4.
Temps de Décharge/Recharge - Combien de temps le Sherpa fonctionnera à sa
puissance actuelle ou combien de temps il faudra pour le charger complètement.
2.
Entrée/Sortie de puissance (Watts) - Des flèches plus longues indiquent une plus
grande puissance absorbée (IN)/distribuée (OUT). Une flèche clignotante indique
que la puissance absorbée est proche du maximum.
3.
Icônes - Recharge sans fil, Onduleur CA, Avertissement de surchauffe
4.
Niveau de la batterie
21
UTILISER VOTRE SHERPA
ÉCRANS INTERACTIFS :
Page des sorties :
Accédez-y en appuyant sur
•
La page des sorties affiche des informations en temps réel pour chaque
port, en incluant les entrées et les sorties.
•
Une barre pleine indique que le port fonctionne comme une sortie.
Une barre zébrée indique que le port fonctionne comme une entrée qui
recharge le Sherpa.
•
Les ports sont répertoriés de gauche à droite.
•
La puissance totale de toutes les sorties est indiquée en bas de l'écran.
*CONSEIL TECHNIQUE : Si vous avez branché le Sherpa sur une source
d'alimentation élevée pour le charger, vous pouvez remarquer que la
puissance maximale disponible augmente.
22
UTILISER VOTRE SHERPA
ÉCRANS INTERACTIFS :
Pages de détails du produit :
Accédez-y en appuyant et en maintenant enfoncé
Faites défiler les pages en appuyant sur
•
Un compteur watt-heure en sortie/entrée pour surveiller la consommation
d'énergie entre les réinitialisations.
•
Appuyez et maintenez
•
Informations en temps réel sur l'entrée de 8 mm.
•
Vérifiez cette page lorsque vous chargez à partir de l'énergie solaire pour
pour réinitialiser le compteur.
optimiser l'alignement du panneau avec le soleil.
23
UTILISER VOTRE SHERPA
ÉCRANS INTERACTIFS :
Pages de détails du produit :
Accédez-y en appuyant et en maintenant enfoncé
Faites défiler les pages en appuyant sur
•
Affiche les informations de sortie ou d'entrée pour les ports USB-C
bidirectionnels de distribution d'énergie.
•
Personnalisez les fonctions spécifiques des ports USB-C bidirectionnels
de distribution d'énergie en appuyant sur
•
AUTO : Le réglage par défaut des deux ports détectera
automatiquement si un périphérique est branché pour être
rechargé ou si le port est utilisé pour charger le Sherpa.
•
ENTRÉE : Ce port ne servira plus qu'à charger le Sherpa.
•
SORTIE : Ce port ne fonctionnera plus que pour recharger
d'autres appareils.
•
24
Informations en temps réel sur les deux ports USB-A.
UTILISER VOTRE SHERPA
ÉCRANS INTERACTIFS :
Pages de détails du produit :
Accédez-y en appuyant et en maintenant enfoncé
Faites défiler les pages en appuyant sur
•
Informations en temps réel sur la sortie CA.
•
Personnalisez le réglage de l'onduleur CA en appuyant
sur
•
TEMPORISATION AUTO : Le réglage par défaut
éteindra l'onduleur CA après 5 minutes d'inactivité
pour économiser son énergie.
•
SANS TEMPORISATION : L'onduleur restera activé
jusqu'à ce que le Sherpa soit éteint, la batterie soit
vidée ou le bouton CA enfoncé.
25
UTILISER VOTRE SHERPA
ÉCRANS INTERACTIFS :
Pages de détails du produit :
Accédez-y en appuyant et en maintenant enfoncé
Faites défiler les pages en appuyant sur
26
•
Informations en temps réel sur la batterie interne.
•
Micrologiciel et date de fabrication du Sherpa.
•
Informations détaillées sur l'utilisation du Sherpa.
UTILISER VOTRE SHERPA
CONSEILS pour UNE CHARGE PAR ORDINATEUR PORTABLE via USB-C :
Nous vous recommandons d'utiliser un câble USB-C vers USB-C lors des recharges
d'ordinateurs portables compatibles. Comme les ports USB-C de distribution
d'énergie sont bidirectionnels, ce qui signifie qu'ils peuvent fonctionner comme une
entrée pour charger le Sherpa ou une sortie pour recharger d'autres appareils, le
fait d'y connecter un ordi portable pourrait causer le Sherpa d'essayer de charger
la batterie interne de l'ordi portable plutôt que de se recharger depuis ce même
ordinateur portable. Pour résoudre ce problème, sélectionnez un paramètre d'entrée
ou de sortie par défaut depuis les pages Détails du produit USB-C PD ou essayez de
reconnecter l'ordinateur portable.
RECHARGE EN INTERMÉDIAIRE :
Il est possible de recharger d'autres appareils pendant que le Sherpa est lui même
rechargé. Branchez le Sherpa sur une source d'alimentation et assurez-vous qu'il est
toujours allumé, puis branchez le téléphone/l'ordinateur portable/la tablette ou tout
autre appareil sur le Sherpa. Assurez-vous de surveiller les niveaux de sortie des
ports pour vous assurer que le Sherpa tire suffisamment d'énergie pour répondre
aux demandes d'énergie des appareils y étant branchés.
*CONSEIL TECHNIQUE : Si TEMPS DE DÉCHARGE (TIME TO EMPTY) est
affiché à l'écran, le Sherpa n'aura pas assez de puissance pour se recharger.
Si TEMPS DE RECHARGE (TIME TO FULL) est affiché, le Sherpa tire assez
de puissance pour se charger ainsi que recharger ce qui y est branché.
27
DÉPANNAGE
Utilise trop de puissance électrique
•
Le Sherpa peut produire 170W en utilisant tous ses ports en même temps.
Si cette production était dépassée, le Sherpa cesserait de fonctionner et
cet écran serait affiché.
*CONSEIL TECHNIQUE : Si le Sherpa est rechargé depuis une source
d'alimentation suffisamment élevée, vous obtiendrez une production
maximale plus élevée.
•
Pour éviter cette mise hors tension, contrôlez l'utilisation d'énergie sur la
page principale et la page des sorties et surveillez de près ce qui est branché.
•
La flèche sur la page principale indiquant la mise hors tension commencera
à clignoter si le Sherpa est proche de s'éteindre.
Échec de port de sortie
•
Cela indique un problème avec une sortie spécifique du Sherpa. Pour
corriger ce problème :
•
Débranchez l'appareil du Sherpa et vérifiez ses spécifications
techniques pour vous assurer qu'il ne consomme pas trop de
puissance. L'avertissement ÉCHEC (FAIL) reste affiché si l'appareil
branché n'est pas compatible.
•
Éteignez le Sherpa et rallumez-le pour réinitialiser l'avertissement
ÉCHEC (FAIL).
•
Si l'avertissement ÉCHEC (FAIL) continuait, appelez le centre de
solutions clients de Goal Zero au 1-888-794-6250.
•
28
Les autres ports du Sherpa continueront de fonctionner.
DÉPANNAGE
Surchauffe
•
Le Sherpa est trop chaud et doit refroidir avant de pouvoir être utilisé
à nouveau.
•
Pour éviter cette mise hors tension, surveillez la page principale pour
y voir l'icône d'avertissement de température.
•
Lorsque vous utilisez le port CA, ne bloquez pas la ventilation
à l'arrière du Sherpa.
•
Lors d'une recharge, assurez-vous que le Sherpa ait une bonne
ventilation.
Réinitialiser le Sherpa
•
Appuyez et maintenez
•
Continuez d'appuyer sur
pendant 3 secondes pour lancer la réinitialisation.
pendant 8 secondes jusqu'à ce que la page
principale soit affichée.
•
NOTE : cela réinitialise le Sherpa, le compteur watt-heure et restaure les
paramètres par défaut de tous les ports.
29
DÉPANNAGE
Niveau faible de la batterie
•
La capacité de la batterie du Sherpa a chuté à 2% et ne peut plus
fournir de courant.
•
Branchez le Sherpa et attendez qu'il atteigne au moins 5%
de charge avant d'essayer de l'utiliser à nouveau.
30
SPÉCIFICATIONS TECHNIQUES
Sherpa 100AC
Temps de charge :
Ports :
USB-C de distribution
d'énergie en source
(60W)
2,5 h
Chargeur mural (45W)
3h
USB-A (2,4A)
9h
Nomad 14
14-28 h
Nomad 28
7-14 h
Boulder 50
4-8 h
Batterie :
Qi sans fil (sortie)
5W max
Ports USB-A (sortie)
5V, jusqu'à 2,4A
(12W max), régulés
Ports USB-C de
distribution d'énergie
(entrée/sortie)
5V/9V/12V/15V/20V,
jusqu'à 3A (60W max),
régulés
Onduleur CA USA
(sortie)
110V, jusqu'à 0,9A
(100W max), 60Hz,
onde sinusoïdale
modifiée
Onduleur CA
International (sortie)
220V, jusqu'à 0,45A
(100W max), 50Hz,
onde sinusoïdale
modifiée
14-22V (50W max)
Type de batterie
Li-ion NMC
Type de pile
18650 par LG chem
Capacité équivalente
de la batterie
25600mAh @ 3,7V
Port de recharge
solaire (entrée,
8 mm de diamètre)
Cycles de vie
Des centaines de cycles
Général
Durée de vie
À recharger tous les
3 à 6 mois
Connexion en série
non
Protection de charge
et de batterie faible
intégrée
Poids
898 g (2 livres)
Dimensions
19 x 2,54 x 14,4 cm
(7,5 x 1 x 5,68 pouces)
Température de
fonctionnement
0-40 C° (32-104 F°)
Système de gestion
Certifications
Garantie
12 mois
N'oubliez pas d'activer votre garantie en ligne sur goalzero.com/warranty
31
32
JETZT AUFLADEN
Vor der Verwendung oder Lagerung laden Sie Ihren Goal Zero Sherpa
100AC mit der Steckdose an der Wand komplett auf. Lassen Sie Ihren Goal
Zero Sherpa 100AC eingesteckt, wenn er nicht verwendet wird..
WICHTIGE ANMERKUNG: Wenn Sie den Goal Zero Shera 100AC mit Sonnenlicht
aufladen, beachten Sie die Spannung des Solar-Panels und überschreiten Sie
22 V nicht. Einzelne oder seriell verkettete Solar-Panels über 22 V können für
den Goal Zero Sherpa 100AC nicht verwendet werden und dem Gerät ernsthaft
schaden. Hilfe bei der Verkettung von Solar-Panels finden Sie bei unserem
Kunden-Center unter 888-794-6250.
WICHTIGE SICHERHEITSHINWEISE
Lesen Sie vor der Verwendung alle Anweisungen und Hinweise aufmerksam,
um Verletzungen oder Beschädigungen am Gerät und an angeschlossenen
Produkten zu vermeiden.
Beachten Sie die Werte aller Eingangs- und Ausgangsstecker: Um einen Brand
oder elektrischen Schlag zu vermeiden, beachten Sie alle Werte, die auf dem
Gerät und auf den Produkten, die Sie verwenden möchten, verzeichnet sind. In
den Bedienungsanleitungen finden Sie weitere Informationen.
Nutzung in einem belüfteten Bereich: Sorgen Sie bei der Verwendung für
angemessene Belüftung und verdecken Sie die Lüftungsöffnung am Gerät
nicht. Unzureichende Belüftung kann zur Beschädigung des Geräts führen.
Legen Sie nichts auf das Gerät, während es gelagert oder verwendet wird.
Bedienen Sie das Gerät NICHT bei Nässe: Sorgen Sie dafür, dass das
Gerät nicht nass wird, um einen Kurzschluss oder elektrischen Schlag zu
vermeiden. Lassen Sie es vor der Verwendung komplett trocknen.
Halten Sie das Gerät sauber und trocken: Untersuchen Sie das Gerät
regelmäßig auf Schmutz, Staub oder Feuchtigkeit.
Stromschlag- oder Brandgefahr: Dieser Sherpa 100AC erzeugt dieselbe
potenziell tödliche Leistung wie eine gewöhnliche Haushalts-Steckdose.
Bitte verwenden Sie ihn genauso vorsichtig wie eine normale Steckdose.
Führen Sie KEINE fremden Objekte in Ausgänge oder Lüftungslöcher ein.
Jede Manipulation an dem Gerät oder an seinen Komponenten lässt die
Garantie verfallen.
33
LERNEN SIE IHR GERÄT KENNEN
Kabelfach
Qi Kabelloses
Lade-Pad (5W max)
Bidirektional (Ein-/
Ausgang) USB-C
Stromversorgungsanschlüsse
5V/9V/12V/15V/20V, bis 3A
(60W max) jeweils
8 mm Gleichstrom-Eingang
Für Aufladung per Solar-,
Wechselstrom oder über
12 V-Batterie (max: 50 W).
(AC- und 12 V-Ladegerät nicht
im Lieferumfang enthalten)
34
Kabelfach
USB-A Anschlüsse
Jeder Anschluss
5V, bis 2,4 A
(12 W max)
Interaktive OLEDAnzeige+ Buttons
Portinformationen und
Produktdetailseiten
in Echtzeit
AC-Wechselrichter
100 W modifizierte
Sinuswelle (150 W
Überspannung)
Kabel im Lieferumfang:
USB-C / USB-A
USB-C / USB-C
Micro-USB / USB-A
Lightning®/ USB-A
35
GERÄT AUFLADEN
JETZT LADEN: Anschließen und vor dem ersten Gebrauch vollständig aufladen. Das Gerät
verfügt über verschiedene Eingänge - 8 mm für Wandstecker und solare Aufladung und
Stromversorgung über USB-C (60W Max).
VOM USB-STECKER AUS: Unter Anwendung des mitgelieferten USB-C-Kabels und einem
der USB-C-Anschlüssen des Geräts schließen Sie es per USB an. Unsere Empfehlung:
Setzen Sie ein Ladegerät mit mindestens 2,4 A für eine vollständige Aufladung mindestens
9 Stunden lang ein. Sie können auch ein USB-C-PD-Ladegerät (bis zu 60 W maximal) für
eine schnellere Wiederaufladung einsetzen.
*TECHNISCHER RATSCHLAG: Wegen der Bidirektionalität der USB-C-PDAnschlüsse können Auf- und Entladungen über denselben Anschluss durchgeführt
werden. In den Produkt-Detailseiten des Geräts kann die Standardfunktion
(automatisch,, Ein-/Ausgang) für jeden USB-C-PD-Anschluss gewählt werden.
SOLARE AUFLADUNG: Laden Sie das Gerät mit einem Solarmodul auf (Nomad, Boulder)
über den 8mm- Eingang. Das beste Gerät ist hierzu unserer Ansicht nach das Nomad-28Plus-Solarmodul (oder eine leistungsstärkere Verson) geeignet
AUFLADUNG VOM WANDSTECKER oder von einem 12V-Gerät. Zubehör verfügbar über
GoalZero.com. Unsere Kundenbetreuung: Tel. 888-794-6250.
SO FUNKTIONIERT'S
Wandstecker
Sherpa 100AC
Ladegerät
Lampen
Kameras
Nomad 28 Plus
Solar-Modul
36
Telefone, Tablets,
Laptops
GERÄT ANWENDEN
BUTTONS:
Zum Ein-/Ausschalten einmal drücken. Gedrückt halten, um
Gerät, Wattstundenzähler und Standardeinstellungen sämtlicher
Anschlüsse zurückzustellen.
Einstellungen auswählen - durch diese scrollen.
Einmal drücken, um Bildschirm auszuschalten. Gedrückt halten,
um Produktdetailseiten anzuzeigen.
Qi-drahtloses Laden ein/aus.
Laden über Steckdose ein/aus.
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Hauptseite:
1.
1.
3.
2.
4.
Lade-/Betriebszeit: Angezeigt wird die verbleibende Betriebszeit oder die
verbleibende Ladezeit.
2.
Energiezufuhr (Watt) Ein-/Ausgang - längere Pfeile weisen auf die
stärkere Leistung hin. Blinkender Pfeil verweist auf annähernd maximale
Leistungsversorgung.
3.
Icons - drahtloses Laden, Wechselrichter, Warnung über erhöhte Temperatur
4.
Batterieladestand
37
GERÄT ANWENDEN
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Ergebnisseite:
Zugriff: drücken
•
Die Ergebnisseite zeigt Echtzeitinformationen für jeden Anschluss,
u. a. Ein-/Ausgänge
•
Ausgefüllter Balken: Der Anschluss dient als Ausgang. Linierter Balken:
Der Anschluss dient als Eingang (zur Geräteaufladung).
•
Anschlüsse werden von links nach rechts aufgelistet.
•
Gesamt-Wattleistung für sämtliche Ausgänge wird unten auf
der Seite angezeigt.
*TECHNIK-TIPP. Schließen Sie das Gerät an eine Energieversorgungsquelle
mit einer höheren Leistung an, ergibt sich eine merkliche Steigerung der
verfügbaren Leistung in Watt.
38
GERÄT ANWENDEN
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Produktdetailseiten:
Zugriff: gedrückt halten
Durch Seiten hindurchscrollen: Button drücken
•
Ein Wattstundenzähler (Ein-/Ausgang) zur Überwachung
des Leistungsverbrauchs zwischen den Rückstellungen.
•
Gedrückt halten,
•
Echtzeitinformationen über den 8mm-Eingang.
•
Diese Seite abrufen bei Solaraufladung. So kann das Solarmodul
um Zähler zurückzustellen.
auf die Sonne ausgerichtet werden.
39
GERÄT ANWENDEN
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Produktdetailseiten:
Zugriff: gedrückt halten
Durch Seiten hindurchscrollen: Button drücken
•
Angezeigt werden Informationen über Ausgang/Eingang der
bidirektionalen USB-C-Leistungsversorgungsanschlüsse
•
Passen Sie die USB-C-Stromversorgungsanschlüsse konkreten
Funktionen durch Drücken des Buttons an:
•
AUTO: Standardeinstellungen für beide Anschlussstellen werden
automatisch erkannt, wenn ein oder dieses Gerät angeschlossen
ist, um aufgeladen zu werden.
•
EINGANG: Diese Schnittstelle wird nun ausschließlich zur
Aufladung dieses Geräts genutzt.
•
AUSGANG: Diese Schnittstelle wird nun ausschließlich zur
Aufladung anderer Geräte genutzt.
•
40
Echtzeitdaten für beide USB-A-Schnittstellen.
GERÄT ANWENDEN
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Produktdetailseiten:
Zugriff: gedrückt halten
Durch Seiten hindurchscrollen: Button drücken
•
Echtzeitdaten des Wechselstrom-Ausgangs.
•
Passen Sie die Einstellung des Wechselrichters
wie folgt an:
•
AUTO TIMEOUT: Als Standardeinstellung gilt ein
Ausschalten des Wechselrichters nach einer 5 min
langen Inaktivität, um Strom zu sparen.
•
KEIN TIMEOUT: Wechselrichter bleibt bis zum
Ausschalten des Geräts, zum Entladen der Batterie
oder zum Drücken des AC-Buttons eingeschaltet.
41
GERÄT ANWENDEN
INTERAKTIVE BENUTZEROBERFLÄCHEN:
Produktdetailseiten:
Zugriff: gedrückt halten
Durch Seiten hindurchscrollen: Button drücken
42
•
Echtzeitdaten über die interne Batterie.
•
Firmware und Herstellungsgerät des Geräts.
•
Detaillierte Bedienungsinformationen über das Gerät.
GERÄT ANWENDEN
TIPPS ZUM AUFLADEN DES LAPTOPS ÜBER USB-C PD:
Wir empfehlen: Wenden Sie ein USB-C/USB-C-Kabel, sofern Sie in Frage kommende
Laptops laden. USB-C-PD-Schnittstellen sind bidirektional. Sie können somit als
Eingang (zum Aufladen dieses Geräts) oder als Ausgang (zum Aufladen anderer
Geräte) nutzen. Wählen Sie zur Problemlösung eine Standardeingangs- oder
-ausgangseinstellung der USB-C PD Produktdetailseite oder versuchen Sie, den
Laptop noch einmal anzuschließen.
DURCHLEITUNGSLADUNG:
Es ist möglich dieses und andere Geräte gleichzeitig aufzuladen. Schließen Sie
dieses Gerät an eine Stromquelle an und achten Sie darauf, dass es eingeschaltet
bleibt. Dann schließen Sie das Telefon/den Laptop/das Tablet oder andere Geräte in
das Sherpa ein. Wichtig: Beachten Sie die Ausgangspegel an den Schnittstellen. So
können Sie gewährleisten, dass das Sherpa eine genügende Leistungsversorgung
für die angeschlossenen Geräte aufweist.
*TECHNIK-TIPP: WIRD DIE ZEIT ANGEZEIGT, die noch zum Entladen der
Batterie übrig bleibt - ist ein Wiederaufladen der Geräte nicht mehr möglich.
Wird die ZEIT ANGEZEIGT, die noch zum vollständigen Aufladen des Geräts
übrig bleibt, kann dieses Geräts wie auch gleichzeitig die angeschlossenen
Geräte aufgeladen werden.
43
FEHLERBEHEBUNG
Leistungsverbrauch zu hoch
•
Das Gerät kann 170 W an Ausgangsleistung erbringen, sofern sämtliche
Schnittstellen gleichzeitig eingesetzt werden. Bei Überschreitung dieses
Grenzwerts erfolgt ein Betriebsstillstand und dieser Bildschirm wird angezeigt.
*TECHNIK-TIPP: Wird das Gerät von einer höheren Stromquelle geladen, ist
eine höhere maximale Ausgangsleistung erzielbar.
•
Zur Vermeidung eines solchen Betriebsstillstand überwachen Sie den
Leistungsverbrauch auf der Haupt- und der Ausgangswertseite und achten
darauf, welche Geräte angeschlossen sind.
•
Der Pfeil auf der Hauptseite ("Betriebsstillstand") beginnt zu blinken, sofern
das Gerät sich in absehbarer Zeit abschalten wird.
Ausgangsfehler!
•
Hier wird ein Problem mit einer bestimmten Ausgangsschnittstelle angezeigt.
Problemlösung:
•
Fremdgerät aus der Schnittstelle ziehen und dessen technische Daten
prüfen: Es darf nicht einen zu hohen Leistungsverbrauch aufweisen.
Die FEHLERMELDUNG bleibt bestehen, sofern das angeschlossene
Gerät weiterhin nicht kompatibel ist..
•
Gerät aus- und wieder einschalten, um die FEHLERMELDUNG
zurückzustellen.
•
Bei andauernder FEHLERMELDUNG kontaktieren Sie die
Kundenbetreuung von Goal Zero (888-794-6250).
•
44
Die restlichen Geräteschnittstellen sind weiterhin funktionsfähig.
FEHLERBEHEBUNG
Überhitzen
•
Gerät zu heiß. Vor erneutem Gebrauch abkühlen lassen.
•
Zur Vermeidung eines solchen Betriebsstillstands überwachen Sie bitte die
Hauptseite und achten auf das Temperatur-Icon.
•
Bei Nutzung der Wechselstrom-Schnittstelle nicht den Ventilator auf
der Geräterückseite blockieren.
•
Während der Aufladung muss die Belüftung des Geräts angemessen
ermöglicht werden.
Zurückstellen des Geräts
•
Drei Sekunden gedrückt halten, um das Gerät zurückzustellen.
•
Acht Sekunden weiterhin gedrückt halten, bis die Hauptseite
angezeigt wird.
•
WICHTIG: Zurückgestellt wird das Gerät selbst, der Wattstundenzähler
und die werkseitig voreingestellten Wert auf sämtlichen Schnittstellen.
45
FEHLERBEHEBUNG
Akku weist nur noch geringe Ladung auf
•
Die Akku-Ladung weist nur noch 2% auf und kann keine Leistung
mehr erbringen.
•
Schließen Sie das Gerät an und warten Sie vor einem nächsten
Gebrauch, bis mindestens eine Akku-Ladung von 5 % erzielt ist.
46
TECHNISCHE SPEZIFIKATIONEN
Sherpa 100AC
Ladezeiten:
Anschlüsse:
USB-C PD Stromquelle
(60W)
2,5 Stunden
Drahtlos: Qi (Ausgang)
5 W max
Wandladegerät
(45 W)
3 Std.
USB A Schnittstelle
(Ausgang)
5 V, bis zu 2,4 A
(12 W max.), reguliert
USB-A (2,4 A)
9 Std.
Nomad 14
14 - 28 Std.
USB-C PD
Schnittstellen
(Eingang/Ausgang)
5V,9V,12V,15V,20V
up to 3A (60W max),
reguliert
Nomad 28
7 - 14 Std.
AC Wechselrichter
US (Ausgang)
Boulder 50
4-8 Stunden
110 V bis zu 0,9 A
(100 W max), 60 Hz,
modifizierte Sinuskurve
GleichstromWechselrichter
(Ausgang)
220 V, bis zu 0,45 A
(100 W max), 50 Hz,
modifizierte Sinuskurve
Solarladebuchse
(Eingang, 8 mm
Durchmesser)
14-22V (50 W max)
Akku:
Chemische
Zusammensetzung
des Akkus
Li-Ion NMC
Akkutyp
18650. Hersteller:
LG chem
Entsprechende
Einzelzellenkapazität
25600mAh @ 3,7 V
Lebenszyklen
Mehrere hundert
Betriebszyklen
Haltbarkeit
Alle 3 bis 6 Monate
aufladen
Verwaltungssystem
Integrierter Ladeschutz
und Schutz bei
schwacher Batterie
Allgemein
Verkettungsfähig
nein
Gewicht
898 g
Abmessungen
19,0 x 2,54 x 14,4 cm)
Betriebstemperatur
0° - 40°C
Zertifikate
Garantie
12 Monate
Achten Sie darauf, Ihre Garantie zu aktivieren: goalzero.com/warranty
47
48
CARGAR LA UNIDAD AHORA
Antes de usarlo o almacenarlo, conecte su Goal Zero Sherpa 100AC a la
pared hasta que esté completamente cargado. Mantenga enchufado su
Goal Zero Sherpa 100AC cuando no lo use.
NOTA IMPORTANTE: Cuando recargue con luz solar su Goal Zero Sherpa 100AC
Lithium, tome nota de las tensiones de los paneles solares y no exceda los 22V.
Los paneles solares individuales o paneles solares en serie que excedan los 22V no
se pueden utilizar con el Goal Zero Sherpa 100AC Lithium y pueden causar daños
graves a la unidad. Para obtener ayuda sobre la colocación de paneles solares,
llame a nuestro Centro de Soluciones al Cliente al 888-794-6250.
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
Lea todas las instrucciones y precauciones detenidamente antes de usarlo
para evitar daños personales o a la unidad y cualquier producto conectado
Tenga en cuenta todas las capacidades nominales de los conectores de
entrada/salida: para evitar el riesgo de incendio o descarga eléctrica, tenga
en cuenta todas las capacidades nominales de la unidad y los productos que
vaya a usar y consulte los manuales para obtener información adicional.
Use el equipo en una zona ventilada: asegure una adecuada ventilación
mientras lo usa y no obstruya ninguna abertura del ventilador en la unidad.
Una ventilación inadecuada podría provocar daños en la unidad. No apile
nada sobre la unidad, ni al guardarla ni al usarla.
NO utilice el equipo en condiciones de humedad: para evitar cortocircuitos y
descargas eléctricas, no deje que la unidad se moje. Espere a que la unidad
se seque por completo antes de usarla.
Mantenga la unidad limpia y seca: inspeccione regularmente la unidad por si
mostrara suciedad, polvo o humedad.
Riesgo de incendio o descarga eléctrica: este Sherpa 100AC genera
la misma corriente alterna (CA) potencialmente mortal que una toma de
corriente en la pared de un hogar. Recuerde usarla con cuidado, al igual que
las tomas de corriente de CA de la pared.
NO introduzca objetos extraños en las salidas ni los orificios de ventilación.
Cualquier manipulación de la unidad o sus componentes anulará la garantía.
49
CONOZCA SU EQUIPO
Compartimento
para el cable
Bandeja de carga
inalámbrica Qi (5 W máx.)
Puertos de suministro de
potencia USB-C bidireccional
(entrada/salida)
5V/9V/12V/15V/20V, hasta
3 A (60 W máx.) cada uno
Entrada CD de 8 mm
Para carga solar, CA,
o de 12 V (50 W máx.)
(El cargador de CA y
el cargador de 12 V se
venden por aparte)
50
Compartimento
para el cable
Puertos USB-A
Cada puerto
5 V, hasta 2,4 A
(12 W máx.)
Pantalla interactiva
OLED + botones
Páginas de detalle de
producto e información
de puerto en tiempo real
Inversor de CA
Onda senoidal
modificada de
100W (sobrecarga
de 150 W)
Cables incluidos:
USB-C a USB-A
USB-C a USB-C
Micro USB a USB-A
Lightning® a USB-A
51
CARGAR SU SHERPA
CÁRGAME AHORA: Conecte y cargue antes del primer uso. El Sherpa tiene múltiple
entradas para escoger, corriente directa (CD) de 8 mm para tomacorriente de pared de
corriente alterna (CA) y carga solar, y suministro de potencia de USB-C (60W Max).
DESDE EL USB: Mediante el uso del cable USB-C incluido y uno de los puertos USB-C de
suministro de potencia (SP) del Sherpa, conecte a un puerto USB. Recomendamos usar al
menos un cargador de 2,4 A para una carga completa en aproximadamente 9 horas. Usted
también puede conectar a un cargador de SP USB-C (hasta 60 W máx.) para una recarga
más rápida.
*CONSEJO TÉCNICO: Dado que los puertos de SP USB-C son bidireccionales, es
posible cargar hacia adentro y hacia afuera desde el mismo puerto. En las páginas de
detalle de producto del Sherpa, usted puede seleccionar una función predeterminada
(auto, entrada, salida) para cada puerto de SP USB-C.
DESDE EL DISPOSITIVO SOLAR: Conecte el Sherpa con un Nomad o bloque de panel
solar y cargue con el sol mediante el uso de la entrada de 8 mm. Para la mejor experiencia
de carga solar, recomendamos el panel solar Nomad 28 Plus o mayor.
DESDE CA o 12 V: ¿Pretende cargar desde un tomacorriente de pared de CA o 12 V? Hay
accesorios disponibles en GoalZero.com. Llame a nuestro Centro de Soluciones al Cliente
para recibir ayuda al 888-794-6250.
CÓMO FUNCIONA
Tomacorriente
de pared
Sherpa 100 CA
Unidad de potencia
Luces
Cámaras
Panel solar
Nomad 28 Plus
52
Teléfonos, tabletas,
computadoras
portátiles
USAR SU SHERPA
BOTONES:
Presione una vez para encender/apagar el Sherpa. Presione y sostenga para
reiniciar el Sherpa, contador de vatios/hora, y restablecer la configuración
predeterminada de todos los puertos.
Seleccione/desplácese a través de la configuración.
Presione una vez para ver la pantalla de salida. Presione y sostenga
para habilitar las páginas de detalle de producto.
Encienda/apague la carga inalámbrica Qi.
Encienda/apague el puerto de CA.
PANTALLAS INTERACTIVAS:
Página principal:
1.
1.
3.
2.
4.
Tiempo para agotarse/cargar por completo: Cuánto durará el Sherpa con su
consumo de potencia actual o cuánto durará para cargarse por completo.
2.
Potencia (vatios) de entrada/salida: Las flechas más largas indican un mayor
consumo de potencia. Una flecha parpadeante indica que se aproxima el
consumo de potencia máximo.
3.
Íconos: Carga inalámbrica, inversor de CA, advertencia de alta temperatura
4.
Nivel de batería
53
USAR SU SHERPA
PANTALLAS INTERACTIVAS:
Página de salidas:
Acceda al presionar
•
La página de salidas muestra información en tiempo real para cada
puerto, incluyendo entradas y salidas.
•
Una barra sólida indica que el puerto funciona como una salida.
Una barra con rayas indica que el puerto funciona como una entrada
para cargar el Sherpa.
•
Los puertos se enumeran de izquierda a derecha.
•
El vataje total de todas las salidas aparece en la parte inferior de
la pantalla.
*CONSEJO TÉCNICO: Si usted tiene el Sherpa conectado a una fuente
de alta potencia para cargarlo, podría notar que el vataje máximo
disponible aumenta.
54
USAR SU SHERPA
PANTALLAS INTERACTIVAS:
Páginas de detalle de producto:
Acceda al presionar y sostener
Desplácese a través de las páginas al presionar
•
Un contador vatios/hora de entrada/salida para monitorear el consumo
de potencia entre reinicios.
•
Presione y sostenga
•
Información en tiempo real sobre la entrada de 8 mm.
•
Revise esta página cuando cargue de un dispositivo solar para ayudarle
para reiniciar el contador.
con la alineación del panel en torno al Sol.
55
USAR SU SHERPA
PANTALLAS INTERACTIVAS:
Páginas de detalle de producto:
Acceda al presionar y sostener
Desplácese a través de las páginas al presionar
•
Muestra información de entrada o salida para los puertos bidireccionales
de suministro de potencia USB-C.
•
Personalice los puertos de suministro de potencia USB-C para realizar
funciones específicas al presionar
•
AUTO: La configuración predeterminada de ambos puertos
detectará automáticamente si un dispositivo está conectado para
cargarse o si el puerto se está utilizando para cargar el Sherpa.
•
ENTRADA: Este puerto ahora solo funcionará como un medio para
cargar el Sherpa.
•
SALIDA: Este puerto ahora solo funcionará como un medio para
cargar otros dispositivos.
•
56
Información en tiempo real para ambos puertos USB-A.
USAR SU SHERPA
PANTALLAS INTERACTIVAS:
Páginas de detalle de producto:
Acceda al presionar y sostener
Desplácese a través de las páginas al presionar
•
Información en tiempo real sobre la salida de CA.
•
Personalice la configuración del inversor de CA al presionar
el
•
DESCANSO AUTOMÁTICO: La configuración
predeterminada apagará el inversor de CA después
de 5 minutos de inactividad para ahorrar energía.
•
SIN DESCANSO: El inversor permanecerá encendido
hasta que el Sherpa se apague, se acabe la batería
o se presione el botón de CA.
57
USAR SU SHERPA
PANTALLAS INTERACTIVAS:
Páginas de detalle de producto:
Acceda al presionar y sostener
Desplácese a través de las páginas al presionar
58
•
Información en tiempo real sobre la batería interna.
•
Firmware y fecha de fabricación del Sherpa.
•
Información detallada de uso del Sherpa.
USAR SU SHERPA
CONSEJOS para CARGA DE COMPUTADORA PORTÁTIL mediante SP de USB-C:
Recomendamos usar un cable de USB-C a USB-C al recargar computadoras portátiles
habilitadas. Dado que los puertos de SP USB-C son bidireccionales, lo que quiere
decir que pueden funcionar como una entrada para cargar el Sherpa o una salida para
cargar otros dispositivos, conectar una computadora portátil puede provocar que el
Sherpa trate de cargarse de la batería interna de la portátil en vez de cargarla. Para
corregir esto, seleccione una configuración predeterminada de entrada o salida de la
página de detalle de producto de SP USB-C o trate de volver a conectar la portátil.
CARGA DE TRASPASO:
Es posible recargar otros dispositivos mientras que el Sherpa está siendo cargado.
Conecte el Sherpa a una fuente de energía y asegúrese de que aún esté encendido,
luego conecte el teléfono/portátil/tableta u otro dispositivo al Sherpa. Asegúrese
de ver los niveles de salida de los puertos para garantizar que el Sherpa esté
extrayendo suficiente potencia para satisfacer las demandas energéticas de lo que
está conectado.
*CONSEJO TÉCNICO: Si el TIEMPO PARA AGOTARSE se muestra en la
pantalla, el Sherpa no tendrá suficiente energía para recargarse. Si se muestra
el TIEMPO PARA CARGAR POR COMPLETO, el Sherpa está extrayendo
suficiente potencia para cargar lo que está conectado y a sí mismo.
59
RESOLUCIÓN DE PROBLEMAS
Consume mucha energía
•
El Sherpa puede transmitir 170 W al utilizar todos sus puertos a la vez.
Si ese consumo es superado, el Sherpa dejará de funcionar y se mostrará
esta pantalla.
*CONSEJO TÉCNICO: Si el Sherpa se está cargando de una fuente de
energía lo suficientemente alta, usted puede lograr un máximo de salida
más alto.
•
Para evitar esta detención, monitoree el uso de energía en la página principal
y la página de salidas y monitoree de cerca lo que se conecta.
•
La flecha de la página principal que indica la potencia de salida empezará
a parpadear si el Sherpa se aproxima a una detención.
Fallo de salida
•
Esto indica un problema en una salida específica del Sherpa. Para corregir
este problema:
•
Desconecte el dispositivo del Sherpa y revise sus especificaciones
técnicas para asegurarse de que no esté extrayendo demasiada
energía. La advertencia de FALLO permanecerá si el dispositivo
conectado no es compatible.
•
Apague y encienda el Sherpa para reiniciar el aviso de FALLO.
•
Si el aviso de FALLO permanece, llame a Servicio al Cliente de
Goal Zero al 888-794-6250.
•
60
Los demás puertos del Sherpa seguirán funcionando.
RESOLUCIÓN DE PROBLEMAS
Sebrecalentamiento
•
El Sherpa está muy caliente y necesita enfriarse antes de que se pueda
usar de nuevo.
•
Para evitar esta detención, monitoree en la página principal el ícono de
advertencia de temperatura.
•
Cuando use el puerto de CA, no bloquee el ventilador en la parte
posterior del Sherpa.
•
Cuando esté cargando, permita que el Sherpa tenga una ventilación
apropiada.
Reiniciar el Sherpa
•
Presione y sostenga
•
Continúe sosteniendo
durante 3 segundos para activar el reinicio.
durante 8 segundos hasta que se muestre
la página principal.
•
NOTA: Esto reinicia el Sherpa, el contador de vatios/hora, y restablece
la configuración predeterminada de todos los puertos.
61
RESOLUCIÓN DE PROBLEMAS
Batería baja
•
La capacidad de la batería del Sherpa se ha reducido a 2 % y ya no puede
brindar energía.
•
Conecte el Sherpa y espere que alcance una carga de al menos 5 %
antes de intentar usarlo.
62
ESPECIFICACIONES TÉCNICAS
Sherpa 100 CA
Tiempos de carga:
Puertos:
Fuente de SP USB-C
(60 W)
2,5 h
Qi inalámbrico (salida)
5 W máx.
Cargador de pared
(45 W)
3h
Puertos USB A
(salida)
5V, hasta 2,4 A
(12 W máx.), regulados
USB-A (2,4 A)
9h
Puertos de SP USB-C
(entrada/salida)
Nomad 14
14-28 h
5V, 9V, 12V, 15V, 20V
hasta 3 A (60 W máx.),
regulados
Nomad 28
7-14 h
Inversor de CA US
(salida)
Boulder 50
4-8 h
110 V, hasta 0,9
A (100 W máx.),
60 Hz, onda senoidal
modificada
Inversor de CA interno
(salida)
220 V, hasta 0,45 A
(100 W máx.),
50 Hz, onda senoidal
modificada
14-22 V (50 W máx.)
Batería:
Química de celdas
Li-ion NMC
Tipo de celda
18650 de LG chem
Capacidad
equivalente a una
celda individual
25600 mAh @ 3,7 V
Puerto de carga solar
(entrada, diámetro de
8 mm)
Ciclos de vida
Cientos de ciclos
General
Vida útil
Cargar cada 3-6 meses
Conectable en serie
no
Sistema de manejo
Carga y protección de
batería baja integradas
Peso
2,0 lb (898 g)
Dimensiones
7,5 x 1,0 x 5,68 in
(19,0 x 2,54 x 14,4 cm)
Temperatura de uso
de funcionamiento
32-104 °F (0-40 °C)
Certificaciones
Garantía
12 meses
Asegúrese de activar su garantía en goalzero.com/warranty
63
64
65
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Sherpa is a trademark
of Goal Zero.
IC Caution.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation
of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
66
SM061218

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47
Create Date                     : 2018:08:07 09:35:42-06:00
Metadata Date                   : 2018:08:07 09:36:17-06:00
Modify Date                     : 2018:08:07 09:36:17-06:00
Creator Tool                    : Adobe InDesign CC 13.1 (Macintosh)
Instance ID                     : uuid:6c2f86f9-bb42-8b4b-b7d8-17fe36b55eb6
Original Document ID            : xmp.did:dfb9e87f-2196-48b5-b8ab-98f334d8c51f
Document ID                     : xmp.id:90e2886b-6f0e-4ffa-b047-3ad9008c0d2c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:b25c004d-3730-43bf-bf54-ef74f5d1d5ca
Derived From Document ID        : xmp.did:adc858d3-8a73-40d5-a735-0d006e366486
Derived From Original Document ID: xmp.did:dfb9e87f-2196-48b5-b8ab-98f334d8c51f
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Macintosh)
History Changed                 : /
History When                    : 2018:08:07 09:35:42-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 68
Creator                         : Adobe InDesign CC 13.1 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AQTM-22050

Navigation menu