Powertech Co R9P602NI Surge Protective Devices User Manual RF PowerLink 125A6 602NI 20120824

Download:
Mirror Download [FCC.gov]
Document ID	1775857
Application ID	1aHN/BxkZzmavgpUWzELpw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	130.48kB (1631027 bits)
Date Submitted	2012-08-27 00:00:00
Date Available	2012-08-30 00:00:00
Creation Date	2012-08-24 15:15:43
Producing Software	Adobe PDF library 9.90
Document Lastmod	2012-08-27 09:16:51
Document Title	RF PowerLink 125A6 602NI 20120824
Document Creator	Adobe Illustrator CS5.1

GREEN POWERLINK
Smart Energy Monitoring &
Surge Protecting Solution
R9P014 / R9P125A6Z8 / R9P602NIZ8
User Manual
All Versions
Š Copyright 2012
The information contained herein is subject to change without notice.
The information contained herein is subject to change without notice.
This document contains proprietary information, which is protected by copyright.
No part of this document may be photocopied, reproduced, or translated
into another language without the prior written consent.
August 2012
TABLE OF CONTENTS
INTRODUCTION
INTRODUCTION........................................................................... 2
FEATURES AND FUNCTIONS ...................................................... 3
INSTALLATION............................................................................ 8
Wireless Setup Range................................................................... 8
Install Wall Tap Surge Protector................................................... 8
Install Strip Surge Protector ........................................................ 8
INITIAL SETUP ........................................................................... 9
Install Battery in Energy Monitor ................................................ 9
Use an AC/DC Adapter (Included)................................................ 10
Wall Mount the Energy Monitor................................................... 10
Perform Energy Monitor Initial Setup ........................................ 10
Thank you for purchasing the GREEN POWERLINK Energy Saving Solution, an
Currency and Electricity Setup ................................................................... 10
with greater awareness you’ll become more energy efficient.
innovative product which is designed to manage home electricity usage
efficiently and reduce home electricity bill.
In an effort to reduce your electricity bills, why not first check out what
appliance uses most energy in your home.
The New GREEN POWERLINK Energy Monitor allows you to take control of
home electricity usage while saving you money in the process.
With GREEN POWERLINK, you can see how much electricity you are using and
Carbon Emission Setup .............................................................................. 11
OPERATION................................................................................ 12
Energy Monitor Display and Control............................................ 12
Fully educated with the critical energy information, you are naturally motivated
Change channel to monitor different surge protectors............................... 13
environment.
to adopt new energy saving habits and reduce harmful carbon emission for our
Turn ON/OFF the energy saver outlets on the surge protector .................. 14
View real time and projection energy consumption .................................... 15
Besides energy conservation, the GREEN POWERLINK surge protectors are also
View Real Time energy information for the channel ................................... 16
equipped with fireproof Surge MOV technology and this ensures your home
View projection energy information for the channel.................................... 16
appliances are well protected and free of fire hazard during catastrophic surge
View accumulation energy consumption...................................................... 17
events.
View total day energy accumulation for the selected channel.................... 18
View total month energy accumulation for the selected channel............... 18
The GREEN POWERLINK is the total solution for green inspiration, energy
View total year energy accumulation for the selected channel .................. 19
conservation, and surge protection for your everyday life.
Exit energy accumulation mode for the selected channel.......................... 19
Surge events counter with sound alert........................................................ 20
Add Channels to the Energy Monitor by Learning....................................... 20
Add Channels to the Energy Monitor by Learning........................ 20
Reset the Energy Monitor to Factory Default ............................... 21
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
FEATURES AND FUNCTIONS
R9P014
Smart Energy Monitor Features
Top View
Front View
   
Back View
Radio Frequency 915MHz
915MHz
Wireless Range
Up to 100 Ft
Control Energy Saver
Smart Energy Monitor Specification
Side View
outlets ON/OFF
Yes
Audible Alarm Alert
Yes
Functions
1. RESET Key : restore factory default
12. Real Time and accumulative energy
2. LEARNING Key: add new channel
usage indicator: the plug icon flashes
3. Channel indicator
according to energy usage. The more
4. Indicates ON/OFF status of CH’s energy
saver outlets
energy you use, faster the icon flashes
13. Embedded alarm speaker
5. Energy Monitor low battery indicator
14. CH & cursor selector key
6. Wireless Signal indicator
15. MODE Key : switch between real time,
7. Surge event counter display
projection and accumulation energy
8. Real time and projection energy
display
display mode
and monitoring
Up to 9 Channels
Learning Function
Yes
Wall Mountable
Yes
LCD Dimension
45mm x 55mm
Replaceable Battery
AA Battery X4
AC/DC Adaptor Input
9V AC/DC adaptor included
Operating Temperature
5℃~45℃ at 85% relative humidity
Storage Temperature
‐5℃~60℃ at 85% relative humidity
16. ON/OFF Key : turn on/off the energy
9. Energy Consumption display
saver outlet
10. Energy Cost display
SET Key : confirmation button
11. CO2 emission display
Channels control
17. AC/DC power adaptor input
18. Battery compartment
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
R9P125A6Z8
Wall Tap Surge Protector Features
R9P602NIZ8
Strip Type Surge Protector Features
1. Surge Protection LED Indicator
- The lighted green LED indicates the surge protection
is working
2. Manual ON/OFF & LEARNING Key
- Manual ON/OFF Mode: press the Manual ON/OFF Key
to turn ON/OFF the AC outlet
- Learning Mode: press the LEARNING key to pair up the
surge protector with the energy monitor
3. AC Outlet
- Monitor individual home appliance electricity usage
Wall Tap Surge Protector Specification
Radio Frequency
915MHz
Wireless Range
Up to 100 Ft
Energy Saver Outlet
AC Rating
15A / 125V / 1875W
Surge Suppression Rating
180J
Clamping Voltage
500V
Surge Protected LED Indicator
Green
Energy Saver Outlet Power ON LED Indicator
Green
Manual ON/OFF , LEARNING Key
yes
Stand-by Power
<1W
Operating Temperature
5℃~45℃ at 85% relative humidity
Storage Temperature
-5℃~60℃ at 85% relative humidity
GREEN POWERLINK Manual All Versions V1.0
1. Wireless Antenna
- External antenna for better reception
2. AC Power Cord
3. Overload Resettable Circuit Breaker
- Protects against current overload
at 15 Amps
- Press to reset the circuit breaker
4. Surge Protection LED Indicator
- The lighted green LED indicates the
surge protection is working
5. Grounded Fault LED Indicator
- The Red LED light only illuminates to
indicate the power outlets are not
properly grounded
7. Manual ON/OFF & LEARNING Key
- Manual ON/OFF Mode: press the
Manual ON/OFF Key to turn ON/OFF
the energy saver outlets
- Learning Mode: press the LEARNING
key to pair up the surge protector with
the energy monitor
8. 4 “Energy Saver” outlets
- The Energy Saver outlets can be
wirelessly turned ON/OFF by the smart
energy monitor to eliminate stand-by
power waste
9. Secondary Protection (Optional)
- Phone / Data line or Coax protection
6. 2 “Always On” outlets
- Provide continuous power for
connected devices
GREEN POWERLINK Manual All Versions V1.0
INSTALLATION
Strip Type Surge Protector Specification
Radio Frequency
915MHz
Wireless Range
Up to 100 Ft
Always On Outlets
Energy Saver Outlets
AC Rating
15A / 125V / 1875W
Surge Suppression Rating
640J
Clamping Voltage
400V
Surge Protected LED Indicator
Green
Grounded Fault LED Indicator
Red
Always On LED Indicator
Green
External Antenna
Yes
Manual ON/OFF , LEARNING Key
Yes
Stand-by Power
<1 W
Operating Temperature
5℃~45℃ at 85% relative humidity
Storage Temperature
-5℃~60℃ at 85% relative humidity
Wireless Setup Range
The energy monitor and surge protector communicate in two-way. To ensure
energy monitor and surge protector communicate with no interruption, please
locate and setup both devices within 100 Ft of range.
Install Wall Tap Surge Protector
The single outlet wall tap surge protector allows the user to track electricity
consumption of individual home appliance and protect it against surge and voltage
spikes.
1. Plug in the wall tap surge protector to a powered 125V AC outlet.
2. Plug in the appliance into the wall tap surge protector outlet.
3. The outlet power can be manually turned ON/OFF by pressing the “Manual
ON/OFF” button on the wall tap surge protector. You may also turn ON/OFF the
outlet power remotely by using the energy monitor (see the operating
instruction – channel mode).
Install Strip Surge Protector
The strip type surge protector allows the user to track electricity consumption of
group home appliances by area and protect them against surge and voltage spike.
1. Connect home appliances to the “ENERGY SAVER” outlets. These outlets are for
appliances which do not need to be on all the time and can be completely turned
off when not in use to eliminate stand-by power waste. The “ENERGY SAVER”
outlets can be controlled ON/OFF by remote energy monitor (see the operating
instruction – channel mode).
GREEN POWERLINK Manual All Versions V1.0
2. Connect home devices to the “ALWAYS ON” outlets. These outlets are not
switchable and provide continuous power for appliances which always need to
stay on at all time.
GREEN POWERLINK Manual All Versions V1.0
3. Plug in the AC power cord of the strip surge protector to a powered 125V AC
outlet.
4. The “ENERGY SAVER” outlets power can be manually turned ON/OFF by
pressing the “Manual ON/OFF” button on the strip surge protector.
Use an AC/DC Adapter (Optional)
The energy monitor can operate with a 9V AC/DC adapter, which can be purchased
separately.
When the AC/DC adaptor is used in conjunction with batteries installed, the energy
monitor will be powered by the AC/DC adaptor to save batteries life in the energy
monitor.
Wall Mount the Strip Surge Protector
1. There are mounting holes on the back of the strip surge protector for wall or
base board mounting.
2. Install screws (not included) on wall or baseboard surface (leaving at least 1/4
inch of the screw exposed).
3. Place and secure the Surge Protector on mounted screws.
Wall Mount the Energy Monitor
1. Select a spot within the wireless range to mount the supplied wall bracket for
the energy monitor.
2. The ideal locations for the energy monitor wall mount are entrance of a room or
location where the energy monitor can be easily seem and accessed.
3. Use adhesive tape or supplied screws to securely attach the supplied wall
bracket to a wall.
INITIAL SETUP
Perform Energy Monitor Initial Setup
Please perform the following initial setup steps for first time operation
Install Battery in Energy Monitor
1. Date & Time Setup
Open the battery compartment on the back of the energy monitor and install 4 x
2. Currency Setup
AA 1.5V alkaline batteries with right polarity.
Note:
Warning: Reversing the polarity may damage the product.
During anytime, you may press the SET button for 3 seconds to enter setup
mode and change currency, electricity rate, and carbon emission rate.
Once batteries are installed, the energy monitor will turn on and enter initial setup
mode. Please proceed and refer to the next instruction for initial setup.
Currency and Electricity Setup
event your local utility uses a tariff calculation other than flat electricity rate,
Note:
please key in the average rate that most nearly resembles your utility’s tariff
Batteries are not included in the product kit.
schedule.
Please do not mix and match different types / new & old batteries in use with the
energy monitor.
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
10
Currency and Electricity Setup
The average carbon emission rate is 0.49Kg (1.08 lbs) of carbon emission for
event your local utility uses a tariff calculation other than flat electricity rate,
every 1 KWH of electricity produced. This can be changed depending upon your
please key in the average rate that most nearly resembles your utility’s tariff
local electric utility. Please contact your local utility for carbon emission rate.
schedule.
1. The Kg symbol blinks first. Use the arrow key to select the weight symbol in
1. The $ symbol blinks first. Use the arrow key to select currency symbol in $ /€ /£
2. Press the SET button to proceed to Electricity Utility Rate setup.
3. The electricity rate value blinks. Use the arrow key to change the rate value.
Kg or LB. Then press the SET button to proceed to carbon emission rate setup.
2. The carbon emission rate blinks. Use the arrow key to change the value.
Press the SET button to finish initial setup.
4. Press the SET button to proceed to Carbon Emission setup.
Note: The default Carbon emission rate is 0.49Kg of carbon emission for every
Note: The default Currency is US dollar and default Electricity rate is 0.12¢per
1KWH of electricity produced.
KWH.
Carbon Emission Setup
OPERATION
Carbon dioxide is emitted in the process of producing electricity by burning coal
& fossil fuel. This is usually referred to CO2 footprint or carbon emission, which
Energy Monitor Display and Control
in turn has contributed global warming and caused abnormal weather.
The user friendly energy monitor allows user to monitor and control up to 9
energy tracking surge protectors.
11
The average carbon emission rate is 0.49Kg (1.08 lbs) of carbon emission for
Discover home energy use by viewing real time, projection and accumulation
every 1 KWH of electricity produced. This can be changed depending upon your
energy information in Watts, KWH, Cost, and Carbon emission. Save money by
local electric utility. Please contact your local utility for carbon emission rate.
adopting new energy saving habits and eliminating stand‐by power waste.
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
12
Change channel to monitor different surge protectors
Turn ON/OFF the energy saver outlets on the surge protector
The energy monitor can monitor up to 9 energy tracking surge protectors. Each
The energy monitor can display the ON/OFF Status of the energy saver outlets on
CH number represents an energy tracking surge protector.
the surge protector.
Use the arrow key to change the channel from CH1 to CH9 to ALL channels. When
To avoid turning on or off the energy saver outlets by accident, the ON/OFF
CH number is changed to ALL, the energy consumption of ALL available Channels
function can only be accessed in real time mode.
will be displayed.
In real time mode, use the ON/OFF Key on the energy monitor to turn ON and
The energy monitor will not display energy information when the selected
OFF the energy saver outlets of the surge protector.
channel does not exit.
13
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
14
View real time and projection energy consumption
View Real Time energy information for the channel
In Real Time Mode, the energy monitor will display instant energy consumption
in Watts, energy cost in $/hr, and carbon emission in Kg/hr.
View projection energy information for the channel
DAY
Month
Year
The energy monitor provides real time and projection energy information. Press
the MODE button to scroll thru different energy information display.
Real Time → Daily Projection → Monthly Projection → Yearly Projection
The energy monitor reads your device energy usage continuously while your
device is on and off, and calculates the projection energy information base on real
time and historical measurements.
We suggest let the energy monitor measure device several typical use cycles, and
the projection energy information will be more accurate.
In Projection Mode, the energy monitor will display energy consumption in KWH,
energy cost in $, and carbon emission in Kg.
Use the MODE key to change from daily / monthly / yearly projection energy
information.
15
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
16
View accumulation energy consumption
View total day energy accumulation for the selected channel
The energy monitor provides energy usage accumulation display. This allows you
to view total accumulation energy usage in day, month and year for each channel.
DAY
DAY
DAY
DAY
Activate the energy accumulation mode for the selected channel
1. The energy monitor will first display DAY 01 for 3 seconds, then display the
total energy accumulation data for 10 seconds in repeat cycle.
2. After 24 hours, the energy accumulation display will advance to DAY 02 and
DAY
display the total energy accumulation data.
Note: the plug icon flashes repeatedly as an accumulation mode indicator
View total month energy accumulation for the selected channel
DAY
Month
1. Select the channel you wish to acquire energy usage accumulation. You can
active the energy usage accumulation for each channel in different time.
2. In DAY mode, press the MODE button 3 seconds to activate the energy
accumulation mode.
1. When the total energy usage accumulates over 30 days, it will move and store
the total energy accumulation data in MONTH database, and the DAY
accumulation data will be reset to 0 from DAY 01.
2. Press the MODE button to switch and view the total energy usage
accumulation from DAY and MONTH
View total month energy accumulation for the selected channel
17
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
18
View total year energy accumulation for the selected channel
Month
Surge events counter with sound alert
Year
1. When the total energy usage accumulates over 12 months, it will move and
store the total energy accumulation data in YEAR database, and the MONTH
accumulation data will be reset to 0 from MONTH 00.
2. Press the MODE button to switch and view the total day energy usage
accumulation from DAY, MONTH and YEAR.
When energy tracking surge protector encounters surge events, the energy
monitor will count and display the frequency of surge events with audible alert.
With the surge events counter display, if surges happen very frequently in short
period of time, this will allow the user to be aware and take the necessary actions
or have the technician to check your home electricity circuitry.
Exit energy accumulation mode for the selected channel
1. In DAY accumulation mode, press the MODE button 3 seconds to exit the
Add Channels to the Energy Monitor by Learning
accumulation mode to DAY projection mode.
2. Channel energy usage will still be accumulated and store in device’s database.
The energy monitor and the energy tracking surge protector in the kit are
pre‐paired and ready to use.
You can purchase more compatible energy tracking surge protectors and expand
up to 9 CH by adding to the exiting energy monitor.
1. Hold the energy monitor close to the energy tracking surge protector.
2. In the energy monitor channel mode, use the arrow key to select which
channel you wish to add the energy tracking surge protector.
3. On the energy tracking surge protector, press and hold the LEARNING
button for 3 seconds until the green LED indicator light flashes and goes into
learning mode.
Note: you can release the button once the indicator light goes flashing
19
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
20
4. Within 10 seconds, press the LEARNING button on the energy monitor to
add energy tracking surge protector to the selected channel.
5. The Surge Protector will beep once to confirm that it has been successfully
added to the channel on the energy monitor.
6. Redo step 3~5 if learning is not successful.
7. Repeat step 2~5 to add more energy tracking surge protectors to different
channels on the energy monitor.
Reset the Energy Monitor to Factory Default
Please follow the instruction below to reset the energy monitor to its factory
default setting.
CAUTION:
Note:
To assure continued FCC compliance:
By performing resetting energy monitor to factory default, all saved data, setup &
Any changes or modifications not expressly approved by the grantee of this device
channel settings will be erased.
could void the user's authority to operate the equipment.
1. Locate the reset point on top of the energy monitor.
2. Push a stylus or pen into the reset point for 5 seconds.
3. The energy monitor will be hard reset to factory default setting. Please
perform all the necessary setup and channel setting.
21
GREEN POWERLINK Manual All Versions V1.0
GREEN POWERLINK Manual All Versions V1.0
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : RF PowerLink 125A6 602NI 20120824
Creator Tool                    : Adobe Illustrator CS5.1
Create Date                     : 2012:08:24 15:15:43+08:00
Modify Date                     : 2012:08:27 09:16:51+08:00
Metadata Date                   : 2012:08:27 09:16:51+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 20
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2728 bytes, use -b option to extract)
Document ID                     : xmp.did:F97F1174072068118083FAA3EFE4F72B
Instance ID                     : uuid:3ae373c2-cd5f-4653-8ebd-46394f4becc3
Original Document ID            : uuid:166F8AC1CC26DF118FEFAB8226B4255F
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:4bd9b34c-7899-cd48-810c-99e077b764cf
Derived From Document ID        : xmp.did:03801174072068118083E784CC272C18
Derived From Original Document ID: uuid:166F8AC1CC26DF118FEFAB8226B4255F
Derived From Rendition Class    : default
History Action                  : saved, saved, saved
History Instance ID             : xmp.iid:F87F1174072068118083BF6DC25BDA5D, xmp.iid:03801174072068118083E784CC272C18, xmp.iid:F97F1174072068118083FAA3EFE4F72B
History When                    : 2010:07:15 14:38:23+08:00, 2012:08:20 15:59:38+08:00, 2012:08:24 15:15:34+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1
History Changed                 : /, /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/DSC_0121.psd, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/power link wall tap.jpg, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/DSC_0121.psd, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/power link wall tap.jpg, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/back.psd, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/side.psd, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/top.psd, /Users/olivea/Desktop/imac/ 中性包材設計/ 說明書/Powerlink RF Standant說明書20120817/front.psd
Startup Profile                 : Basic CMYK
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 209.999929
Max Page Size H                 : 148.500152
Max Page Size Unit              : Millimeters
Font Name                       : EuropeanPi-One, DINOT-Bold, DIN-Bold, DIN-Medium, DIN-Regular, ArialMT, Arial-BoldMT, DFHeiStd-W7, DFHeiStd-W5, MyriadPro-Regular, DFHei-Bd
Font Family                     : European Pi, DINOT, DIN, DIN, DIN, Arial, Arial, 華康黑體 Std, 華康黑體 Std, Myriad Pro, DFHei Bd-HK-BF
Font Face                       : 1, Bold, Bold, Medium, Regular, Regular, Bold, W7, W5, Regular, Bd-HK-BF
Font Type                       : Type 1, Open Type, Type 1, Type 1, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : 001.000, Version 7.460;PS 7.046;hotconv 1.0.38, 001.000, 003.130, 001.000, Version 5.06, Version 5.06, Version 1.03, Version 1.03, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, 7.0d17e1
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : EuropPiOne; European Pi, DINOT-Bold.otf, DINBol; DIN-Bold, DINMed; DIN-Medium, DINReg; DIN-Regular, Arial.ttf, Arial Bold.ttf, DFHeiStd-W7.otf, DFHeiStd-W5.otf, MyriadPro-Regular.otf, STHeiti Light.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Black C
Swatch Groups Colorants Red     : 0
Swatch Groups Colorants Green   : 0
Swatch Groups Colorants Blue    : 0
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 13.000000
Swatch Groups Colorants Yellow  : 48.999996
Swatch Groups Colorants Black   : 97.999992
Swatch Groups Group Name        : Grayscale
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: K=5
Swatch Groups Colorants Mode    : GRAY
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Gray    : 12
Producer                        : Adobe PDF library 9.90
Page Count                      : 12
Creator                         : Adobe Illustrator CS5.1

EXIF Metadata provided by EXIF.tools