Powerware 5140 Users Manual _PW5140_.799

5140 to the manual 2b37c987-a32d-4b7b-a80e-7a07696f64a9

: Powerware Powerware-5140-Users-Manual-520056 powerware-5140-users-manual-520056 powerware pdf

Open the PDF directly: View PDF .
Page Count: 4

Powerware®5140 Rack-Mount UPS

Features

APower Factor Corrected (PFC) design

protects more equipment

A6U rack height conserves valuable

rack space

AAdvanced Battery Management

(ABM™) doubles battery service life

ABuck and Boost voltage

regulation with pure sine

wave output

AExtended Battery Modules (EBMs)

prolong run times

AModular design eases setup and

service

ALoad Segments (separate receptacle

groups) enable scheduled shutdowns

and maximize run time for

critical devices

AHot-Swappable batteries and Manual

Bypass Switch simplify service

ABacked by 10-Year Pro-rated

Warranty (U.S. and Canada)

In addition to its exceptional power rating

and size, the Powerware 5140 also

incorporates Advanced Battery

Management (ABM™) which assures

reliability and improves performance by

doubling battery service life, optimizing

recharge time, and providing up to a 60-

day notice of the end of useful battery life.

The Powerware 5140 utilizes multiple

receptacle groups, called Load Segments,

which can be pre-configured to shutdown

peripherals first to effectively triple battery

run times for the most critical equipment.

Extended Battery Modules (EBMs) are also

available to extend run times, and to

preserve data integrity, the Powerware

5140 is bundled with award-winning

LanSafe III and FailSafe III power

management software.

T

o meet the power protection needs of

rapidly expanding rack-based

applications, Powerware Corporation

(formerly Exide Electronics) proudly intro-

duces the Powerware 5140 Rack-Mount

uninterruptible power system (UPS). The

Powerware 5140 is powerful and flexible

enough to respond to the demands of

virtually any Enterprise computing

network.

The Powerware 5140 is designed with a

unity power factor rating, meaning it is

ideally suited to meet the requirements of

today's Power Factor Corrected (PFC)

loads. With proven and reliable technology,

it delivers up to a third more power than

traditionally rated UPSs while still

occupying only 6U (10.5 inches) of

valuable rack space.

Rating: 6000 VA/

6000 Watts

Voltage: 200-240 Vac

Frequency: 50/60 Hz

Configuration: 6U rack-mount

for standard

19-inch racks

Product Snapshot

Technical Specifications1

The lead-acid batteries typically used in a

UPS are considered viable as long as they

can maintain backup times of at least half

that of new batteries. The illustration to the

right shows that batteries that are constantly

trickle charged (as are virtually all other UPS

batteries on the market today) reach the end

of their useful life in less than half the time

of batteries charged using ABM. ABM uses a

patented three-stage charging technique that

not only doubles battery service life, but

also optimizes battery recharge time and

provides up to a 60-day advanced notifi-

cation of pending end of useful battery life.

Advanced Battery Management (ABM™) Technology Doubles Battery Service Life

Data based upon tests performed by an independent battery manufacturer.

ELECTRICAL INPUT

Voltage 200, 208, 220, 230, & 240 Vac user-selectable;

see Model Selection Guide for default settings

Normal Voltage ±20% of nominal voltage without using batteries

Range

Extended Voltage 160-288V without using batteries (set via front panel)

Range

Frequency 50/60 Hz, ±3 Hz (+5/-3 Hz with extended voltage range)

Connection Hardwired

Efficiency 96%

ELECTRICAL OUTPUT

Power Out 6000 VA/6000 Watts

Voltage Range ±10% of nominal voltage

(online)

Voltage Range ±5% of nominal voltage

(on battery)

Wave Form Sine Wave

(on battery)

Frequency Same as input (±0.5% during battery operation)

Connections Receptacles or hardwired; see Model Selection Guide

Max Current 29A at 208 Vac; 26A at 230 Vac

Output Protection Resettable circuit breakers

BATTERY

Type Maintenance-free, sealed, valve-regulated lead-acid

(VRLA), (28), 12V 5 AH

Extended Batteries Maximum of 2 Extended Battery Modules (EBMs)

Backup Time See Battery Run Times table

Recharge Time <3 hours to 80% usable capacity

Extended Battery <10 hours to 80% usable capacity

Recharge Time

COMMUNICATIONS

Serial Ports (2) Serial communication ports for use with power

management software and installable option cards,

including ConnectUPS SLC-EM SNMP Adapter and the

Port Expander Card

User LEDs Normal Operation (green), On Battery (yellow),

On Bypass (yellow), and Alarm (red)

LCD Two-line LCD with three button control

LCD Languages Danish, Dutch, English, French, German, Spanish,

Italian, and Japanese

Front Panel Buttons On, Off, and Alarm Silence/Self Test

Communications 6-foot communication cable included

Cable

ENVIRONMENTAL AND SAFETY

Operating 10°C to 40°C (25°C for optimal performance)

Temperature

Transit Temperature -20°C to 55°C

Storage Temperature 0°C to 25°C

Humidity (Operation) 20 to 80% (noncondensing)

Humidity 5 to 95%

(Non-operating)

Operating Altitude 0 to 10,000 feet (non-operating: 0 to 30,000 feet)

Audible Noise 55 dBA at 1 meter

Safety Markings UL, CSA, NOM. Models PW5140 6000i and

PW5140 6000 HW also CE and VDE

Safety UL1778; CSA22.2 No.107.1,No.107.2,No.950; CB

Certifications Bulletin No.86AI; EN50091-1; EN60950;

EMKO-TSE207/95; NOM-019-SCFI-1993

EMC Markings FCC-A; CISPR-A; VCCI

Immunity IEC 801-2, IEC 801-3, IEC 801-4, IEC 801-5

Surge Suppression Conforms to IEEE 587B and ANSI C62.41

REPO Port Meets NEC code 645-11 intent and UL requirements

1. Due to continuing product improvement programs, specifications are subject to

change without notice.

Unity Power

Factor Rating

What does unity power factor rating mean?

Quite simply, it means that the watt rating of the

UPS is equal to its VA rating. Traditionally,

UPSs have been designed, built, and sold with a

power factor rating of approximately 0.6 to 0.7.

For example, a 1000 VA UPS could supply a

maximum of 600 to 700 watts. Historically, this

0.7 power factor was appropriate for the

majority of computer loads the UPS was

intended to support since most computers

demanded power at a 0.7 power factor.

Today, however, a large percentage of high-end

computers, utilize Power Factor Corrected

(PFC) power supplies, which have a power

factor of approximately 1.0. Take a look at the

configuration below:

To support this load, you need to select a

UPS with a rating that meets or exceeds both

the watt and VA demand shown above.

A traditionally rated 5000 VA/3750 watt UPS

without a unity power factor rating cannot be

used. The Powerware 5140, on the other

hand, has capacity to spare.

Powerware 5140 Features

Load Segments

Load Segments are groups of receptacles that can be independently controlled via the front

panel LCD interface and/or LanSafe III/FailSafe III, which is bundled with the Powerware

5140. Load Segments provide extended battery run times and flexible management of the

UPS. The five Load Segments of model PW5140 6000i are outlined below.

Front Panel Display

Extended Battery Modules (EBMs)

To extend battery backup times, you can connect up to two EBMs. Each EBM occupies

3U (5.25 inches) of rack space.

Load Segments divide the

Powerware 5140 into five

virtual UPSs

Shut down Load Segments

to decrease load and

extend backup time for

other Load Segments

Reboot a locked up server

by turning a Load Segment

off and on

LCD Status Screen

Menu Navigation

Keys

Bypass LED

Alarm LED

UPS On Battery

Power On (Normal)

On Off Alarm Silence/

Self-Test

You can hot-swap both the

standard batteries and EBMs

without powering down the

connected load. This makes it

possible to extend the life of

the UPS without returning the

unit for service.

Load: Load:

Equipment Watts VA

(3) Servers* 3300 3366

(2) Workstations* 1000 1020

(1) Color Monitor 200 300

Total 4500 4686

*Equipment with PFC power supplies.

Powerware®5140 Model Selection Guide

BATTERY RUN TIMES

STANDARD ONE ADDITIONAL TWO ADDITIONAL

LOAD BATTERIES EXTENDED BATTERY MODULE EXTENDED BATTERY MODULES

1000 Watts 1 hour 2 minutes 2 hours 24 minutes 3 hours 56 minutes

2000 Watts 28 minutes 1 hour 6 minutes 1 hour 47 minutes

3000 Watts 18 minutes 40 minutes 1 hour 6 minutes

4000 Watts 12 minutes 28 minutes 47 minutes

5000 Watts 8 minutes 21 minutes 36 minutes

6000 Watts 6 minutes 18 minutes 28 minutes

This table provides typical information. Battery times are approximate and may vary with equipment, configuration, disk access, battery use, temperature, etc.

REAR PANELS

PW5140 6000i PW5140 6000

MODEL POWER OUT INPUT/OUTPUT FREQUENCY INPUT OUTPUT DIMENSIONS WEIGHT

NUMBER (VA/WATT)VOLTAGE (VAC)(HZ)CONNECTION RECEPTACLES (HXWXD)1(KG/LB)

(12) IEC-320, C13 & 10.5 x 17.25 x 24.3 in

PW5140 6000i 6000/6000 208/230250/603Hardwired (3) IEC-320, C19426.7 x 43.8 x 61.7 cm 136/3006

(2) L6-30R & 10.5 x 17.25 x 24.3 in

PW5140 6000 6000/6000 208/230250/603Hardwired (2) IEC-320526.7 x 43.8 x 61.7 cm 136/3006

Hardwired & 10.5 x 17.25 x 24.3 in

PW5140 6000 HW 6000/6000 208/230250/603Hardwired (2) IEC-320526.7 x 43.8 x 61.7 cm 136/3006

Options Custom 5.25 x 17.25 x 22.5 in

PW5140 BATT – – – Adapter – 13.3 x 43.8 x 57.2 cm 81.6/180

Custom 1.98 x 19.28 x 9.90 in

PW5140 PDU7250/250 120 60 Adapter (2) 5-15R 5.03 x 48.97 x 25.15 cm 8.6/19

Adjustable; fits

PW5119 MK23 –––– –standard 19-inch rack 4.5/10

1. 19-inch wide front panel with a 17.25-inch wide chassis; depth does not include front panel (.5 inches) 2. 208/230 Vac auto-sensing default. User-selectable via

LCD interface for 200, 208, 220, 230, and 240 Vac. 3. Automatic frequency synchronization. 4. Divided into 5 Load Segments. 5. Divided into 2 Load Segments;

IEC-320 receptacles are used to connect optional PW5140 PDU. 6. Shipping weight is 325 pounds (147 kg). 7. Sidewall design occupies 0U of rack space.

PW5140 6000 HW

China and North Asia

Hong Kong: 852.2745.6682

Australia and South Pacific

Sydney, Australia: 61.2.9878.5000

Canada

Toronto, Ontario: 416.798.0112

Powerware Corporation

Corporate Headquarters

8609 Six Forks Road

Raleigh, NC 27615 U.S.A.

Toll Free: 1.877.797.9273 (PWRWARE)

or 919.872.3020

Fax: 1.800.753.9433

or 919.870.3411

E-mail: info@powerware.com

www.powerware.com

Latin America/Caribbean

Sunrise, FL: 954.835.1180

Europe/Middle East/Africa

Berkshire, England: 44.1753.606700

Southeast Asia

Singapore: 65.861.9877

A (2) INSTALLABLE OPTION SLOTS

B (2) COMMUNICATION PORTS

CMANUAL BYPASS SWITCH

D REPO PORT

EHARDWIRE INPUT

FLOAD SEGMENT 1

GLOAD SEGMENT 2

HLOAD SEGMENT 3

ILOAD SEGMENT 4

JLOAD SEGMENT 5

KCIRCUIT BREAKER(S)

L IEC-320 RECEPTACLES FOR PDU CONNECTION

MHARDWIRE OUTPUT

Revision 5140FXA 7/99

Reprint 7/99