Powerwave Technologies BDA1200 Bi-Directional Amplifier, Model BDA1200 User Manual antinst

Powerwave Technologies Inc. Bi-Directional Amplifier, Model BDA1200 antinst

Corrected page 17 of users maunal

Download: Powerwave Technologies BDA1200 Bi-Directional Amplifier, Model BDA1200 User Manual antinst
Mirror Download [FCC.gov]Powerwave Technologies BDA1200 Bi-Directional Amplifier, Model BDA1200 User Manual antinst
Document ID64125
Application IDSW2rmTlkoTCdPgAI9MBovw==
Document DescriptionCorrected page 17 of users maunal
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.85kB (23130 bits)
Date Submitted1999-10-15 00:00:00
Date Available1999-11-17 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat PDFWriter 3.02 for Windows
Document Lastmod0000-00-00 00:00:00
Document Titleantinst.PDF
Document CreatorMicrosoft Word
Document Author: Unknown

•
ANTENNA INSTALLATION
All Antenna Installation is to be performed by Qualified Technical Personnel only.
Antenna Installation Instructions and locations below, are for the purpose of satisfying FCC RF
Exposure Compliance requirements.
The Roof Top Antenna for linking to the Donor Site is a directional (high gain) Antenna fixed-mounted
physically on the side or top of a building, or on a tower. The Antenna Gain must be no more than 10 dB.
The Roof Top Antenna location should be such that only Qualified Technical Personnel can access it, and
that under normal operating conditions no other person can touch the Antenna, or approach within 10
meters of the Antenna.
The In-Building Antenna connection is via a coaxial cable distribution system with Signal Taps at various
points connected to the fixed-mounted Indoor Antennae. This is shown in the figure in the Introduction.
The Indoor Antennae are simple 1/4 Wavelength (0 dB Gain) types. They are used with Kaval 12, 16, or
20 dB Cable Taps. As such the maximum EIRP will be at the first Tapped Antenna, which will be 12 dB
below the maximum signal level of the BDA1200 (+40 dBm with Booster & PA); +28 dBm, or 0.63 Watts
EIRP. These Antennae are to be installed such that no person can touch the Antenna, or approach within
0.2 Meters.
ANTENNA INSTALLATION WARNING
ALL ANTENNA INSTALLATION IS TO BE PERFORMED BY QUALIFIED TECHNICAL PERSONNEL
ONLY.
ANTENNA INSTALLATION INSTRUCTIONS AND LOCATIONS ARE FOR THE PURPOSE OF
SATISFYING FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, AND ARE NOT OPTIONAL
ALL ROOF TOP ANTENNA INSTALLATION MUST BE SUCH THAT NO PERSON CAN TOUCH THE
ANTENNA, OR APPROACH CLOSER THAN 10 METERS.
ALL IN-BUILDING ANTENNAE INSTALLATIONS MUST BE SUCH THAT NO PERSON CAN TOUCH
THE ANTENNAE, OR APPROACH CLOSER THAN 0.2 METERS.
l Page 17
Kaval Telecom Inc.
DCM000000001

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Creator                         : Microsoft Word
Create Date                     : Friday, October 15, 1999 9:34:34 AM
Title                           : antinst.PDF
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.02 for Windows
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H6M-BDA1200

Navigation menu