Precise Biometrics MS010013 USB Fingerprint Reader Security System User Manual Quick Setup Manual

Precise Biometrics AB USB Fingerprint Reader Security System Quick Setup Manual

Contents

Quick Setup Manual

Most of the information in a fingerprint is located in the middle of the finger pad. Therefore, it is important that the middle of the finger pad is placed in the sensor centre at enrolment and logon. ●Do not “roll” your finger pad. Just press it flat to the sensor. ●Place the centre of your finger pad in the sensor centre.●Use medium pressure and avoid rotating your finger.Perfectly placed finger.To get more experience in logging on with your fingerprint, refer to the Precise Demo. Access the Precise Demo by clicking Start > Programs > Precise Biometrics > Demo.1. If you have a Precise 100 SC Reader, insert your smart card into the reader and place your finger on the reader. If you have a Precise 100 A Reader, simply place your finger on the reader. You can also press the Enter key and then enter your Username.2. Place your primary logon finger on the fingerprint reader sensor. The Verify Fingerprint screen will appear.3. Keep your finger placed on the sensor as long as the yellow light is flashing. The system verifies your fingerprint and access rights for the selected domain.If verification fails, make sure:●your username and domain are correct●you place the selected finger on the centre of the sensor For more information on the Precise 100 system, please refer to the User’s Manual located on the software CD.© Precise Biometrics AB, 2000info@precisebiometrics.comwww.precisebiometrics.comTelephoneSweden: +46-46-311 100United States: +1-703-848 9266All rights reserved. Second Edition September 2000P/N: AM010013 R2AGood image: fingerprint in the middle, medium pressure to the sensor.Logging on Usinga Fingerprint Correct Finger PlacementQuick ReferencePrecise 100 SCPrecise 100 APrecise 100 Client forWindows NT/2000
Log on as an administratorYou must have administrator rights on your local computer to install the Precise 100 Client software.Install softwareInsert the Precise 100 Client software CD. The Master Setup screen will appear. 1. If you have a Precise 100 Reader with USB connector, please connect it to your PC now. Windows 2000 will detect the new hardware and install the necessary drivers from the CD. If you have a Precise 100 Reader with parallel port connector, click the Parallel Driver button to install the necessary parallel port drivers.2. If you are using Windows NT you must install the Microsoft Smartcard Base Components, if not previously installed. If you are using Windows 2000 do not install the Smartcard Base Components, the system may crash. To install the Smart Card Base Componentsa) Click the SC Base Components button, a submenu appears.b) Click the Base Components button in the submenu.c) Click the Update button in the submenu and follow the instructions3. To install the Precise 100 Client software, click the Precise 100 Client button and follow the instructions. 4. Restart the computer.NOTE: To be able to log into a domain server account, the user has to be enrolled on the domain server. If theuser is enrolled on a local computer, he or she can only log into that computer using a fingerprint.1. Log on as an administrator.2. Click Start > Programs > Precise Biometrics > BioManager. The BioManager screen will appear.3. Click User > New User. The User Information screen of the Fingerprint Enrolment wizard will appear.4. Enter the desired information in the Username,Full Name and Description field. If you have a Precise 100 SC Reader, you can choose to store the data on the smart card. Click Next. The Reading Fingerprints screen will appear.5. Select the fingerprint to be registered by clickingin one of the checkboxes.6. Follow the instructions on the screen. To ensure a good image, make sure the centre of the finger pad is placed in the sensor centre. The fingerprint is read four times, for the system to select and verify a good print.7. Register another fingerprint, or click Next. TheLogon Information screen will appear.8. Select primary logon finger. The primary logonfinger is the default finger that will be used to log into the system. NOTE: If a current password user is enrolled, the current password isno longer valid. A new password must be typed, in order for the user to log on with a password.9. Click Next. The saving screen will appear.Click Finish to store the data.Connect the fingerprint readerIf you have a Precise 100 Reader with USB connector, skip this sectionand go to the nextpage “Log on as an administrator”. If you have a Precise 100 Reader with parallel portconnector, follow the instructions below.1. Make sure that the computer has been turned off.2. Connect the fingerprint reader to the computer as shown below.To set the parallel port:1. Access the system setup utility on your computer. On most computers this is doneby pressing the F1, F10, Delete or Esc key during system booting, i.e. immediatelyafter switching on the computer. 2. Find the parallel port mode and set it for ECP. If the ECP selection is unavailable,the parallel port is probably already set for ECP.3. Save your changes and exit the system setup utility.InstallationEnrolling a Userparallel port connectorpass-through PS/2 connectorkeyboard PS/2 connectorNOTE: The parallel port must be set to ECPmode, otherwise the fingerprint reader will notfunction properly. Please refer to the computermanual for additional information, or follow theinstructions below.NOTE: If the CD does not start automatically, startthe CD from the desktop by double-clicking MyComputer > CD > MasterSetup.exe icon.10.
Log on as an administratorYou must have administrator rights on your local computer to install the Precise 100 Client software.Install softwareInsert the Precise 100 Client software CD. The Master Setup screen will appear. 1. If you have a Precise 100 Reader with USB connector, please connect it to your PC now. Windows 2000 will detect the new hardware and install the necessary drivers from the CD. If you have a Precise 100 Reader with parallel port connector, click the Parallel Driver button to install the necessary parallel port drivers.2. If you are using Windows NT you must install the Microsoft Smartcard Base Components, if not previously installed. If you are using Windows 2000 do not install the Smartcard Base Components, the system may crash. To install the Smart Card Base Componentsa) Click the SC Base Components button, a submenu appears.b) Click the Base Components button in the submenu.c) Click the Update button in the submenu and follow the instructions3. To install the Precise 100 Client software, click the Precise 100 Client button and follow the instructions. 4. Restart the computer.NOTE: To be able to log into a domain server account, the user has to be enrolled on the domain server. If theuser is enrolled on a local computer, he or she can only log into that computer using a fingerprint.1. Log on as an administrator.2. Click Start > Programs > Precise Biometrics > BioManager. The BioManager screen will appear.3. Click User > New User. The User Information screen of the Fingerprint Enrolment wizard will appear.4. Enter the desired information in the Username,Full Name and Description field. If you have a Precise 100 SC Reader, you can choose to store the data on the smart card. Click Next. The Reading Fingerprints screen will appear.5. Select the fingerprint to be registered by clickingin one of the checkboxes.6. Follow the instructions on the screen. To ensure a good image, make sure the centre of the finger pad is placed in the sensor centre. The fingerprint is read four times, for the system to select and verify a good print.7. Register another fingerprint, or click Next. TheLogon Information screen will appear.8. Select primary logon finger. The primary logonfinger is the default finger that will be used to log into the system. NOTE: If a current password user is enrolled, the current password isno longer valid. A new password must be typed, in order for the user to log on with a password.9. Click Next. The saving screen will appear.Click Finish to store the data.Connect the fingerprint readerIf you have a Precise 100 Reader with USB connector, skip this sectionand go to the nextpage “Log on as an administrator”. If you have a Precise 100 Reader with parallel portconnector, follow the instructions below.1. Make sure that the computer has been turned off.2. Connect the fingerprint reader to the computer as shown below.To set the parallel port:1. Access the system setup utility on your computer. On most computers this is doneby pressing the F1, F10, Delete or Esc key during system booting, i.e. immediatelyafter switching on the computer. 2. Find the parallel port mode and set it for ECP. If the ECP selection is unavailable,the parallel port is probably already set for ECP.3. Save your changes and exit the system setup utility.InstallationEnrolling a Userparallel port connectorpass-through PS/2 connectorkeyboard PS/2 connectorNOTE: The parallel port must be set to ECPmode, otherwise the fingerprint reader will notfunction properly. Please refer to the computermanual for additional information, or follow theinstructions below.NOTE: If the CD does not start automatically, startthe CD from the desktop by double-clicking MyComputer > CD > MasterSetup.exe icon.10.
Most of the information in a fingerprint is located in the middle of the finger pad. Therefore, it is important that the middle of the finger pad is placed in the sensor centre at enrolment and logon. ●Do not “roll” your finger pad. Just press it flat to the sensor. ●Place the centre of your finger pad in the sensor centre.●Use medium pressure and avoid rotating your finger.Perfectly placed finger.To get more experience in logging on with your fingerprint, refer to the Precise Demo. Access the Precise Demo by clicking Start > Programs > Precise Biometrics > Demo.1. If you have a Precise 100 SC Reader, insert your smart card into the reader and place your finger on the reader. If you have a Precise 100 A Reader, simply place your finger on the reader. You can also press the Enter key and then enter your Username.2. Place your primary logon finger on the fingerprint reader sensor. The Verify Fingerprint screen will appear.3. Keep your finger placed on the sensor as long as the yellow light is flashing. The system verifies your fingerprint and access rights for the selected domain.If verification fails, make sure:●your username and domain are correct●you place the selected finger on the centre of the sensor For more information on the Precise 100 system, please refer to the User’s Manual located on the software CD.© Precise Biometrics AB, 2000info@precisebiometrics.comwww.precisebiometrics.comTelephoneSweden: +46-46-311 100United States: +1-703-848 9266All rights reserved. Second Edition September 2000P/N: AM010013 R2AGood image: fingerprint in the middle, medium pressure to the sensor.Logging on Usinga Fingerprint Correct Finger PlacementQuick ReferencePrecise 100 SCPrecise 100 APrecise 100 Client forWindows NT/2000

Navigation menu