Primax Electronics B50811 Bluetooth Headset User Manual back ai

Download:
Mirror Download [FCC.gov]
Document ID	764841
Application ID	MhXYE20576T785vqhW3i9w==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.02kB (212793 bits)
Date Submitted	2007-03-05 00:00:00
Date Available	2007-03-05 00:00:00
Creation Date	2007-01-26 18:05:31
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-03-03 16:09:50
Document Title	user manual back.ai
Document Creator	PScript5.dll Version 5.2
Document Author:	erich.huang

Introduction
Thanks for purchasing PHS-6 Bluetooth Headset. Your Bluetooth Headset is
a stylish headset that enables comfortable handsfree communication with
compatible phone that supports Bluetooth technology.
2.Indicator Light
3. Charger connector For battery charging.
4. Earpiece Relays the caller's voice.
Functions & Controls
5. Microphone Picks up your voice input.
Pairing the Bluetooth headset to a
Bluetooth mobile phone
Pairing is the process for linking the headset with your Bluetooth enabled
mobile phone. After this process is completed, you can use the Bluetooth
Headset with the paired mobile phone. The Bluetooth Headset can be
paired with up to 8 compatible phones but connected to only one phone
at a time.
1. The headset must be in off mode.
Getting started
Remove all components from the package...
Bluetooth Headset (with 15 mm diameter earbud)
AC Battery Charger
User Guide
An extra earbud (18 mm diameter)
2. Press the button for at least 6 seconds. The LED light flashing rapidly,
and two high tones can be heard. Your mobile phone can now "look for"
the headset.
3. Activate the Bluetooth connection with the mobile phone according to
the mobile phone’s user’s guide.
4. Set the mobile phone to search for the Bluetooth devices according to
the mobile phone’s user’s guide.
Charging the battery
1. Multifunction key
/Switches the headset on and off
/Answer incoming call
/End active call
/Reject incoming call by long pressing button
Before using the Bluetooth Headset, you need to charge the built-in
rechargeable battery for approximately 2 hours. When the battery is fully
charged, it provides up to 6 hours talking time and up to 150 hours standby
time.
1. Connect the AC battery charger cable’s jack to Bluetooth Headset’s
socket.
2. Plug the charger’s AC plug to AC outlet. When charging, the Bluetooth
Headset’s status indicator lights in solid green.
3. When the battery is fully charged, the status indicator turns off. Unplug
the charger cable from AC outlet and Bluetooth Headset.
5. Select the Bluetooth Headset from the phone menu.
6. Enter the pin code 0000 to connect (or “pair”) Bluetooth Headset to the
phone. You will hear two high tones when pairing completed.
7. Select PHS-6 from the device list on your phone. The LED will light
twice rapidly every 5 seconds with the headset connected to your
phone.
If the headset is turned on within 10 meters from several paired phones,
the headset will try to connect to the last connected phone within 10
seconds. If the headset does not connect to the last connected phone
(for example, the paired phone is turned off or it rejects the connection),
the LED will be flashing every 2.5 seconds indicating it is in power on
however not engaged status.
Place the headset over your ear
Answering and Ending a Phone Call
The headset is ready to wear on either ear. You can plug the earpiece
into your ear and point the headset toward your mouth.
When a call comes in, the LED will flash twice briefly every second, and
ringing tones can be heard through the headset until the call is answered.
The headset comes with a 15 mm earbud by default. For a better fit on
your ear, the headset is provided with an extra learger earbud (18 mm).
You can use the larger one if necessary.
Press the multi-function key briefly to answer the call. Press the multifunction key briefly to end an active call.
You can also answer and end the call through the mobile phone.
Hardware reset
Note: Some phones offer Auto Answer function and may be used with the
headset or speakerphone, but this is a phone dependent feature. Please
refer to the manual of your phone for that function.
Plug in power connector (DC jack). Please notice that pairing information
will NOT be erased.
Rejecting a Call
Operation
When you receive an incoming call that you do not want to answer, press
the multi-function key for more than 2 seconds.
Reconnecting the Paired Bluetooth Headset to a
Compatible Phone
To reconnect the Bluetooth Headset to the last connected phone, proceed
as follows:
1. Press and hold the multi-function key for 4 seconds to turn on the
Bluetooth Headset.
2. Make sure your phone is on and Bluetooth function is enabled. Please
refer to the phone’s user guide and make the connection in the
Bluetooth menu of your phone.
3. The phone should connect to the headset automatically. If not, please
refer to ‘Pairing the Bluetooth Headset with a Compatible Phone’
section and performance pairing again,
Note: If the headset is away from the connected phone for more than 10
meters, the headset will be disconnected from the phone, and will perform
reconnecting procedure automatically within 10 minutes.
Other status
To turn on the headset
Press the multi-function key for about 2 seconds. The LED lights in solid green
for 1 second. 4 ascending tones can be heard.
Redialing the Last Dialed Number
(Phone dependent)
Status
To turn off the headset
Double press the multi-function key for when no call is in progress. A
high tone can be heard.
Idle* (power on but
Flashing once every 2.5 seconds
not connected)
Switching the Call between Phone and Headset
Battery low
Press the multi-function key for 2 seconds or use the respective function in
your phone. A high tone can be heard.
Charging
Press the multi-function key for about 4 seconds. The LED lights in solid green
for 1 second. 4 descending tones can be heard.
Making a Phone Call
When the headset is connected to the phone, make a call using the phone in
the normal way.
Note: the call functions depending on the phone type you use. Please refer to
the manual of your phone for the related function.
Call in active
LED
Double brief flashing every 2.5
seconds
Solid light
Double brief flashing every 5
seconds
Sound
n/a
A low beep every
5 seconds
n/a
n/a
Voice dialing (phone dependent)
Press the multi-function key briefly when there is no call in active to initial
voice dialing, and one high tone can be heard. To terminate voice dialing,
press the multi-function key briefly again.
* The headset will switch off automatically if in idle mode for 30 minutes.
FCC/Industry Canada notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1. This device may not cause harmful
interference; and 2. This device must accept any interference received,
including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician
for help. NOTE: FCC Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. NOTE: Modifications
not expressly approved by PRIMAX could void the user's authority to
operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Page Mode                       : UseAttachments
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2007:01:26 18:05:31+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:03:03 16:09:50+08:00
Metadata Date                   : 2007:03:03 16:09:50+08:00
Format                          : application/pdf
Title                           : user manual back.ai
Creator                         : erich.huang
Document ID                     : uuid:e7832c30-f5f4-4924-b3d3-7cfca1d5fd8b
Instance ID                     : uuid:6a28aabb-8a45-4a25-b164-8de37e1fd93e
Has XFA                         : No
Page Count                      : 3
Author                          : erich.huang

EXIF Metadata provided by EXIF.tools