Primax Electronics B81301 Bluetooth Wireless Stereo Headset User Manual 1

Primax Electronics Ltd Bluetooth Wireless Stereo Headset 1

Manual

General InformationThank you for purchasing PSH-1A Wireless Stereo Headset. Your new device is a stylishproduct that enables you to communicate comfortably with compatible mobile phones thatsupport Bluetooth wireless technology.WARNING:Using a mobile phone while driving can distract you and may cause accidents.Driving with both ears covered may violate Traffic Regulations in certain countries.Please consult your local authorities.Getting startedWhat’s included(1) Headset (2) User Guide (3) Power adaptor** (4) USB cable**** depends on customer requireOverview of the headset(1) Indicator LightStatus indication with blue and red lights(2) Volume Down buttonDecreases the volume(3) Volume Up buttonIncreases the volume(4) Multifunction buttonPower on/off, play/pause, answer/end a call(5) Forward buttonForward to next song(6) Backward buttonGo back to the previous song(7) Charger connector
Charge the headsetBefore using the headset for the first time, you must charge it for approximately 3.5 hours.When the battery is fully charged, it provides up to 12 hours of talk time, 10 hours of musicplaying time and up to 350 hours of standby time. Always use the charger provided in the salespackage.1. Connect the charger cable to the headset.2. Plug the charger into a wall socket. The lights turn to solid red in charging status.3. When the battery is fully charged, the red light will turn off.Turn on / off the headsetTo turn on the headsetPress the Multifunction button for more than 3 seconds. You will hear a long high tone beepfrom the earpiece and see blue light on right earpiece flashing three times rapidly.To turn off the headsetPress and hold the Multifunction button. You will hear a long high tone beep from the earpieceand see solid red light on for 3 seconds on right earpiece.Pair the PSH-1A headset and your mobile phone or other devicesYou will need to pair your PSH-1A with Bluetooth-enabled mobile phone and/or devices beforeyou can use it. Your PSH-1A can be paired with up to 8 compatible phones/devices. However,it can only be connected to one phone at a time.To pair the headset…1. Make sure the headset is off. Press and hold the Multifunction button for more than 7seconds, until you short low tone beeps from the earpiece and the blue and red lightsflashing alternately.2. Refer to user guide of the phone / device and set the phone / device into pairing mode.3. When the phone / device finds the headset, PSH-1A will be shown. Please accept andconfirm with the presskey 0000 (4 zeros).4. Once pair and connection are succeeded, you will hear a short high tone beep andsee blue light flashing. The headset is now ready to serve.The PSH-1A will automatically reconnect to the last-connected phone / device. If theconnection is failed due to phone / device not found, the headset will automatically enter intopairing mode.
Connecting with two devices simultaneouslyIt is possible to connect the PSH-1A to two devices at the same time, so that you can listen tothe music and keep phone connectivity at the same time.To do so, please pair with cellular phone first and keep connecting profiles on both ends. Makethe cellular phone’s Bluetooth service disconnected from the headset.Then, pair the PSH-1A with MP3 player or computer. After this completed, let the cellularphone ‘find’ the headset again.In this scenario, when there is an incoming call, the incoming call will be overriding music. Onlywhen the call is ended that music will be resumed.Button general operating functionsAdjusting volumePress the Volume Up button to increase the volume. To decrease the volume, press VolumeDown button.Reset paired devicesTo reset the pairing list on your phone, while power on, press and hold both Forward andBackward buttons. The light will be flashing in purple. By doing this, all previous saved pairingprofile will be erased.Reset hardwareTo reset the hardware, plug the charger and press Volume Up and Volume Down buttonssimultaneously. By doing this, the headset will be reset and power will be turn off.Play music in stereoTo Start PlayMake sure your headset is connected in Advanced Audio profile. Press Multifunction buttononce to play the music.To PausePress Multifunction button to pause.
Jump to next trackPress the Forward button to forward to the next song.Jump to previous trackPress the Backward button to backward to the previous song.Fast forward *Press and hold Forward button to perform fast forward.Rewind *Press and hold the Backward button to perform rewind.* Fast forward and rewind functions might be unavailable on some cellular phones. Thosefeatures are phone dependant.Phone related functionsAnswer a callYou will hear a ringing tone form earpiece when the phone received a call. Press theMultifunction button once briefly to pick up the call. You will hear a brief beep when the call ispicked up.End a callTo end an active call, press briefly the Multifunction button once briefly to end the call. You willhear a high tone beep when the call is ended.Reject a callPress and hold the Multifunction button for more than 2 seconds to reject a call you don’t wantto answer. You will hear a brief beep when the call is rejected.Redialing the last dialed numberTo redial the last dialed number, press and hold the Multifunction button. You will hear a briefbeep when the call is successfully dialed.Voice dialing (Phone dependant)Press and hold the Volume Down button for 3 seconds to activate voice dialing feature. Youwill hear a brief beep. Now you can start to perform voice dialing.Please notice that this function is phone dependant. Please refer to the phone user guide formore information.
What the sound meansPower on / off Long high tone beepPairing mode Short low tone beepsConnection lost / fail Long low tone beepConnection established Short high tone beepSound volume over range(too loud or reachingmute)Descending low tonesIncoming call 7 ascending tones (30 sec) Battery low Long low tone, repeat every 30 secondsWhat the light means (all on the right earpiece)Turning on Flashing blue light 3 times rapidlyPower on however notengagedFlashing short (0.2 sec) blue lights everysecondPower on and engaged Flashing long (1 sec) blue lights every 2secondsPairing mode Flashing red / blue lightsBattery low Flashing red lightsTurning off Solid red light, 3 secondsSpecificationsDimensions (L x W x T) 140 x 166 x 53 mmWeight 78gBluetooth Compliance Bluetooth 1.2 specification w/ handsfreeprofile & headset profile 1.1, supportsBluetooth 1.2 A2DP, AVRCP, HSPPaired Devices Up to 8, one at a timeSecurity Encrypted linkConnection Point-to-pointOperating Temperature 0°C up to 55°CBattery Power 3.7v / 500mAh Lithium-PolymerTalk Time Up to 8 hours*Standby Time Up to 200 hours*CE , FCC, BQB, RoHS compliance* Battery endurance might be shorter in high temperatures.
Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate thisequipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operatinginstructions for satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.

Navigation menu