Primax Electronics B81301 Bluetooth Wireless Stereo Headset User Manual

Primax Electronics Ltd Bluetooth Wireless Stereo Headset 1

a href="https://usermanual.wiki/Primax-Electronics" itemprop="url"> Primax Electronics >

Manual

General InformationThank you for purchasing PSH-1A Wireless Stereo Headset. Your new device is a stylishproduct that enables you to communicate comfortably with compatible mobile phones thatsupport Bluetooth wireless technology.WARNING:Using a mobile phone while driving can distract you and may cause accidents.Driving with both ears covered may violate Traffic Regulations in certain countries.Please consult your local authorities.Getting startedWhat’s included(1) Headset (2) User Guide  (3) Power adaptor**  (4) USB cable**** depends on customer requireOverview of the headset(1) Indicator LightStatus indication with blue and red lights(2) Volume Down buttonDecreases the volume(3) Volume Up buttonIncreases the volume(4) Multifunction buttonPower on/off, play/pause, answer/end a call(5) Forward buttonForward to next song(6) Backward buttonGo back to the previous song(7) Charger connector
Charge the headsetBefore using the headset for the first time, you must charge it for approximately 3.5 hours.When the battery is fully charged, it provides up to 12 hours of talk time, 10 hours of musicplaying time and up to 350 hours of standby time. Always use the charger provided in the salespackage.1. Connect the charger cable to the headset.2. Plug the charger into a wall socket. The lights turn to solid red in charging status.3. When the battery is fully charged, the red light will turn off.Turn on / off the headsetTo turn on the headsetPress the Multifunction button for more than 3 seconds. You will hear a long high tone beepfrom the earpiece and see blue light on right earpiece flashing three times rapidly.To turn off the headsetPress and hold the Multifunction button. You will hear a long high tone beep from the earpieceand see solid red light on for 3 seconds on right earpiece.Pair the PSH-1A headset and your mobile phone or other devicesYou will need to pair your PSH-1A with Bluetooth-enabled mobile phone and/or devices beforeyou can use it. Your PSH-1A can be paired with up to 8 compatible phones/devices. However,it can only be connected to one phone at a time.To pair the headset…1. Make sure the headset is off. Press and hold the Multifunction button for more than 7seconds, until you short low tone beeps from the earpiece and the blue and red lightsflashing alternately.2. Refer to user guide of the phone / device and set the phone / device into pairing mode.3. When the phone / device finds the headset, PSH-1A will be shown. Please accept andconfirm with the presskey 0000 (4 zeros).4. Once pair and connection are succeeded, you will hear a short high tone beep andsee blue light flashing. The headset is now ready to serve.The PSH-1A will automatically reconnect to the last-connected phone / device. If theconnection is failed due to phone / device not found, the headset will automatically enter intopairing mode.
Download:
Mirror Download [FCC.gov]
Document ID698849
Application ID/O53rODF2vGnA4y9bFIMHQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.04kB (75557 bits)
Date Submitted2006-08-29 00:00:00
Date Available2006-08-29 00:00:00
Creation Date2006-08-22 12:55:54
Producing SoftwarepdfFactory Pro 2.30 (Windows XP Professional Chinese)
Document Lastmod2006-08-28 17:15:56
Document Title文件1
Document CreatorpdfFactory Pro www.pdffactory.com
Document Author: EMILY
FCC ID Filing: EMJB81301

Navigation menu