Primax Electronics M7BX01 Rocketfish Bluetooth Mouse User Manual Combo UM
Primax Electronics Ltd Rocketfish Bluetooth Mouse Combo UM
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 788280 |
| Application ID | REOr3avPekfIngeCF1E8Dw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 197.31kB (2466330 bits) |
| Date Submitted | 2007-05-03 00:00:00 |
| Date Available | 2007-05-03 00:00:00 |
| Creation Date | 2007-03-13 10:00:39 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-04-30 09:09:15 |
| Document Title | Combo_UM.book |
| Document Creator | FrameMaker 7.0 |
| Document Author: | chinghung |
Bluetooth Keyboard and Mouse Combo Set Tab Caps Lock Shift F1 F2 F3 F4 F5 F6 F7 Alt Alt F11 F12 Prt Scr Screen Scroll Lock Pause Break Insert Home Page Up Delete End Page Down Backspace Num Lock Home F10 Ctrl F9 F8 -- Esc Enter PgUp Shift End Ctrl PgDn Ins Del User Manual Enter Bluetooth Keyboard and Mouse Combo Set FCC Compliance Statement This equipment has been tested and found to comply with the limits for a ThisBdevice with part 15 the15 FCC Operation Class digitalcomplies device, pursuant to of Part of Rules. the FCC Rules. isThese limits are designed to provide reasonable protection against harmful subject to the following two conditions: (1) This device may not cause interference in residential installation. This equipment generates, uses harmful interference, and (2) this device must accept any interference and can radiate radio frequency energy and, if not installed and used in received, including interference that may cause undesired operation. accordance with the instructions, may cause harmful interference to radio communications. However, there is nofound guarantee that with interference This equipment has been tested and to comply the limits will notforoccur in particular installation. If this equipment does a Class B digital device, pursuant to part 15 of the FCC Rules.cause harmful interference to radio or television reception, which can be These limits are designed to provide reasonable protection against determined by turning the equipment off and on, the user is encouraged harmful interference in a residential This measures: equipment to try to correct the interference by oneinstallation. of the following generates, uses and can radiate radio frequency energy and, if not installedorand used in with the instructions, may cause - Reorient relocate theaccordance receiving antenna. - Increase the separation between the equipmentHowever, and receiver. harmful interference to radio communications. there is no - Connect the equipment into an outlet on circuit different from thatIfto guarantee that interference will not occur in a particular installation. which the receiver is connected. this equipment does cause harmful interference to radio or television - Consult the dealer or an experienced radio/TV technician for help. reception, which can bePart determined byFCC turning the Operation equipmentisoffsubject and This device complies with 15 of the Rules. user istwo encouraged to try correct the may interference by one or to on, the the following conditions: (1)toThis device not cause harmful more of theand following interference, (2) thismeasures: device must accept any interference received, including interference that may cause undesired operation. - Reorient or relocate the receiving antenna. FCC Caution: Any or between modifications not expressly approved by - Increase thechanges separation the equipment and receiver. the party responsible for compliance could void the user's authority to - Connect the equipment into an outlet on a circuit different from operate this equipment. that to which IMPORTANT NOTE:the receiver is connected. FCC Radiation Exposure Statement: - Consult the dealer or an experienced radio/TV technician for This equipment complies with FCC radiation exposure limits set forth for help. an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada-Industry Canada(IC) Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Bluetooth Keyboard and Mouse Combo Set About this manual Thank you for your purchase of this Bluetooth keyboard and mouse combo set. This topics covered in this manual are listed as following. Introduction Installing the Batteries Installing and Uninstalling the WIDCOMM Bluetooth Stack Setting up the Keyboard and Laser Mouse Using the Mouse Software Using the WIDCOMM Bluetooth Stack Troubleshooting Bluetooth Keyboard and Mouse Combo Set Contents Introduction ................................................ 1 Package List .....................................................................1 Features ...........................................................................2 Product Views ..................................................................3 Installing the Batteries ................................... 6 Keyboard ..........................................................................6 Laser Mouse .....................................................................7 Installing and Uninstalling the WIDCOMM Bluetooth Stack ......................................................... 8 Installing the WIDCOMM Bluetooth Stack ........................8 Uninstalling the WIDCOMM Bluetooth Stack .................12 Setting up the Keyboard and Laser Mouse .......... 13 Automatic Pairing in Boot Mode .....................................13 Quick Pairing in Windows ...............................................15 Pairing on WIDCOMM Bluetooth Stack ..........................16 Using the Mouse Software .............................. 18 Installing the Bluetooth Mouse Software ........................18 Uninstalling the Bluetooth Mouse Software ....................19 Adjusting the Tilt/ Scroll Wheel Speed ...........................19 Using the WIDCOMM Bluetooth Stack ................. 21 Using the Stack for the First Time ..................................21 Connecting to the other HID Devices .............................22 Troubleshooting .......................................... 23 Bluetooth Keyboard and Mouse Combo Set 1 Introduction 1.1 Package List Before you start using the set, check the following contents in your package. If anything is missing, contact your retailer. F2 F3 F4 F1 Tab Caps Lock Shift Ctrl F5 F6 F7 F8 Alt F9 Alt Backspace F11 F12 Prt Scr Screen Scroll Lock Pause Break Insert Home Page Up Delete End Page Down F10 -- Esc Enter Shift Ctrl Num Lock PgUp Home End PgDn Ins Del Enter Keyboard Batteries for the keyboard and mouse Use Laser Mouse USB Bluetooth dongle ual Man User Manual Bluetooth Keyboard and Mouse Combo Set 1.2 Features Keyboard/ Laser Mouse • Keyboard - 104-key design - Ten frequently used hotkeys - One connect button • Laser mouse - Tilt/ scroll wheel - Three mouse buttons (Left, right, and middle buttons) - Four media key buttons - One pairing button • Power saving mode • Excellent performance working range up to 10 meters (line-ofsight) • Power saving mode • Dual color status LED indicator USB Bluetooth Dongle • One pairing button • Bluetooth specification v1.0 and v2.0 compliant • Supports both keyboard and mouse • Supports additional Bluetooth devices System Requirements • Bluetooth/USB keyboard & mouse supported computer • Microsoft Windows 2000, XP or later • WIDCOMM Bluetooth software version 5.0 • Bluetooth Mouse software for configuring the scrolling speed Bluetooth Keyboard and Mouse Combo Set 1.3 Product Views Keyboard 11 F2 F3 F4 F1 Tab Caps Lock Shift Ctrl F5 F7 F6 F9 F8 Alt F11 Backspace F12 Prt Scr Screen Scroll Lock Pause Break Insert Home Page Up Delete End Page Down F10 -- Esc Enter Shift Alt Ctrl Num Lock Home PgUp End PgDn Ins Del Enter 10 11 connect No Icon Description No Icon Description Left button Stop button Rewind button Fast Forward Tilt/ Scroll Wheel button Rewind Fast Forward button 10 Mute Play/ Pause button 11 Status LED Fast Forward button 12 Connect Connect button Bluetooth Keyboard and Mouse Combo Set Laser Mouse OFF ON Connect No Description Left button Rewind button Tilt/ Scroll Wheel button Fast Forward button Play/ Pause button Fast Forward button Stop button Status LED Pairing button • The keyboard hotkeys and the mouse media key buttons are disabled by default. To use these hotkeys and buttons, you need to install the Bluetooth WIDCOMM stack as described in “3 Installing the WIDCOMM Bluetooth Stack” on page 8. • To enable the horizontal scrolling, you need to install the Bluetooth Mouse software on your computer. See “5.1 Installing the Bluetooth Mouse Software” on page 18 for more information. Bluetooth Keyboard and Mouse Combo Set LED Status LED Color Description Green Mouse is turned on, battery level normal. Keyboard/ Flashing red Mouse LED Flashing red and green Low battery. Mouse/ Keyboard pairing. To view more detailed information on the keyboard/ mouse battery status, go to the Control panel > Keyboard > Bluetooth or Control panel > Mouse > Bluetooth. If you want to change the settings for low battery alarm, click the Low Battery Alarm button to open the following screen. Change the settings according to your preferences. Bluetooth Keyboard and Mouse Combo Set 2 Installing the Batteries The keyboard and mouse both need two AA Alkaline batteries. Follow the steps below to install the batteries. 2.1 Keyboard 1. Remove the battery cover as shown. 2. Install two "AA" batteries while observing the polarity (+ and -) marks indicated inside the compartment. 3. Replace the battery cover. Bluetooth Keyboard and Mouse Combo Set 2.2 Laser Mouse 1. Press the tab to release the battery cover. 2. Install two "AA" batteries while observing the polarity (+ and -) indicated inside the housing. 3. Replace the battery cover. Bluetooth Keyboard and Mouse Combo Set 3 Installing and Uninstalling the WIDCOMM Bluetooth Stack 3.1 Installing the WIDCOMM Bluetooth Stack Before installing the WIDCOMM Bluetooth stack, plug the USB Bluetooth dongle into a USB port of your computer. 1. Insert the provided Installation CD in the CD ROM drive. 2. The installation stack loads automatically. If not, click the Setup.exe in the bin folder of the CD ROM. 3. The welcome screen introduces you to the installation process. Click Next to continue. Bluetooth Keyboard and Mouse Combo Set 4. Read the agreement and select “I accept he terms in the license agreement”. Click Next to continue. 5. The program will be installed in the folder as shown. Click Change to install in a different location. Click Next to continue. Bluetooth Keyboard and Mouse Combo Set 6. Click Install to start the installation. The installation may need some time to complete. If the “Bluetooth device not found” message appears, plug the USB Bluetooth dongle into a USB port of your computer and click OK. The Found New Hardware Wizard starts installing the components for the USB Bluetooth dongle. 10 Bluetooth Keyboard and Mouse Combo Set 7. The following screen appears to indicate the installation is complete. 8. Remove the dongle and plug it back in, the keyboard and mouse will pair automatically. Click Finish to exit the installation. The following prompt requires you to restart the computer so that the Bluetooth stack takes effect. Click Yes to restart your computer now or No to restart later. (for Windows 2000 only) 11 Bluetooth Keyboard and Mouse Combo Set 3.2 Uninstalling the WIDCOMM Bluetooth Stack Follow the steps below to uninstall the WIDCOMM Bluetooth stack from your computer. 1. Remove the USB Bluetooth dongle. 2. Click Start > Settings > Control Panel > Add/Remove Programs. 3. Select WIDCOMM Bluetooth Software from the program list and click Remove. 4. A confirmation message appears. Click Yes to uninstall or No to cancel. 5. When the program has been removed, a prompt requires you to restart the computer. Click Yes to restart your computer now or No to restart later. 12 Bluetooth Keyboard and Mouse Combo Set 4 Setting up the Keyboard and Laser Mouse 4.1 Automatic Pairing in Boot Mode Follow the steps below to enable the keyboard and mouse in boot mode. 1. Plug the USB Bluetooth dongle into one of USB ports before starting your computer. 2. Now slide the power switch of the mouse to turn the mouse on. 3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired. 4. The Bluetooth connection is established. Turn on the computer and use the keyboard to enter the BIOS setup. 5. Follow the on-screen instructions to enter the BIOS setup screen. 13 Bluetooth Keyboard and Mouse Combo Set 6. Use the keyboard/mouse to view the menu and configure the settings. Enabling the function of USB keyboard/mouse in BIOS If the keyboard/mouse failed to work (refer to “7 Troubleshooting” on page 23 for more probable conditions), check that the USB function of the keyboard/mouse has been enabled in the BIOS setup. 1. Before turning on your computer, make sure the Bluetooth connection has been established. 2. Turn on your computer and follow the on-screen instructions to enter the BIOS setup. 3. Use the cursor keys on the keyboard to navigate through the menu items and enable the USB function for USB keyboard and mouse. (In some BIOS settings, you can use the Bluetooth mouse to navigate through the items.) Some old PC systems do not support the USB keyboard/mouse in BIOS/DOS environment. 14 Bluetooth Keyboard and Mouse Combo Set 4.2 Quick Pairing in Windows The Bluetooth keyboard and mouse has been set to a pre-pairing mode as the factory default. For quick pairing, enable the pre-pairing mode following the steps below. 1. Plug the USB Bluetooth dongle into a USB port of your computer. The first time you connect the keyboard or mouse to your computer, the Found New Hardware Wizard will automatically launch. Cancel the Wizard and follow the steps below. 2. For the mouse, press the pairing button at its bottom. For the keyboard, press the connect button on the back of the keyboard for two seconds. 3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired. USB Bluetooth dongle button • When pairing, the keyboard/mouse LED lights red and green in turn. • The pairing settings will be cancelled if you press the mouse pairing button or the keyboard connect button. To reconnect the mouse or keyboard, press the USB Bluetooth dongle button again (Refer to the step3 above). 4. Press any key on the keyboard and move your mouse to ensure they are connected. Each time you turn on your computer, the keyboard and mouse will be automatically detected. 15 Bluetooth Keyboard and Mouse Combo Set 4.3 Pairing on WIDCOMM Bluetooth Stack Before using the Bluetooth stack for keyboard and mouse pairing, make sure of the following: The WIDCOMM Bluetooth stack is installed and set up as instructed in “3 Installing and Uninstalling the WIDCOMM Bluetooth Stack” on page 8. The batteries are inserted properly and fully charges. The USB Bluetooth dongle is plugged into a USB port of your computer. The mouse is switched on. To start the Bluetooth stack for the first time, see “6 Using the Stack for the First Time” on page 21 for more information. 1. Press the Connect button on the mouse and keyboard to start pairing. 2. Press the USB Bluetooth dongle button until the following Human Interface Device (HID) screen appears. It starts to search for all Bluetooth devices. 16 Bluetooth Keyboard and Mouse Combo Set 3. When the mouse is connected, the following confirmation message appears. Click to confirm that the correct mouse is connected. 4. When the keyboard is connected, the following screen appears. Use the paired keyboard to type the digits shown on the screen and press the Enter key. The keyboard is then connected. The Bluetooth security code changes each time the keyboard is connected. The keyboard/mouse will enter the power saving mode when not used for a period of the time. 17 Bluetooth Keyboard and Mouse Combo Set 5 Using the Mouse Software 5.1 Installing the Bluetooth Mouse Software Before installing the Bluetooth Mouse software, make sure the WIDCOMM stack has been installed on your computer. Then plug the USB Bluetooth dongle into an available USB port of your computer. 1. Insert the provided Installation CD in the CD ROM drive. 2. The software starts automatically. If not, click the Setup.exe in the bin folder of the CD ROM. 3. The welcome screen introduces the installation process. Click Next to continue. 4. The setup program will install the program files into the folder as shown. You may click Browse to install the program files to a different location. After you choose a installation directory, click Next. 18 Bluetooth Keyboard and Mouse Combo Set 5. Once installed, you will be prompted to restart your computer before using the Bluetooth Mouse Software. 5.2 Uninstalling the Bluetooth Mouse Software Follow the steps below to uninstall the Bluetooth Mouse software from your computer. 1. Remove the USB Bluetooth dongle. 2. Click Start > Settings > Control Panel > Add/Remove Programs. 3. Select Bluetooth Mouse from the program list and click Remove. A confirmation message appears. Click Yes to uninstall or No to cancel. 5.3 Adjusting the Tilt/ Scroll Wheel Speed Your mouse comes with an advanced scroll wheel that enables horizontal window scrolling as well as vertical. To adjust the scrolling wheel speed, click the Mouse icon in the system tray or right-click to view the context menu, and then click Adjust Property. 19 Bluetooth Keyboard and Mouse Combo Set Scroll Speed You can specify the speed at which the screen will scroll when using the scroll wheel function. 1. Select Scroll x lines per notch or Scroll one screen per notch. Scroll x lines per notch Select to set the number of lines to scroll when the scroll wheel is moved one notch. Specify the number of lines with the up and down arrows. Scroll one screen per notch Select to scroll the entire window when the scroll wheel is moved one notch (i.e. page up/down). 2. Click OK to have your changes take effect. Horizontal Scrolling To configure the speed of the tilt scroll wheel, do the following: 1. Move the slide towards Slow or Fast to adjust the scroll speed. 2. Click Use Default to restore the horizontal scrolling speed to its default setting. 3. Click OK to have your changes take effect. 20 Bluetooth Keyboard and Mouse Combo Set 6 Using the WIDCOMM Bluetooth Stack 6.1 Using the Stack for the First Time To start using the Bluetooth Stack, double click the Bluetooth icon in the system tray. 1. The Initial Bluetooth Configuration Wizard will launch. Follow the instructions on screen to complete the configuration. 2. When the Bluetooth Configuration is complete, the following HID screen appears and starts to search for Bluetooth devices. 3. Click on the HID device you want to connect with. Then follow the instructions on-screen to enable the selected device. 21 Bluetooth Keyboard and Mouse Combo Set About the Bluetooth icon The Bluetooth icon acts as an indicator for dongle status. 1. A red icon indicates there is no dongle inserted. 2. A white icon indicates the dongle is plugged in. 3. A green icon indicates the dongle has detected the HID devices. 6.2 Connecting to the other HID Devices Besides the mouse and keyboard, the Bluetooth Stack also allows you to connect to other Bluetooth devices. 1. Make sure the USB Bluetooth dongle has been plugged onto your computer. 2. Set the Bluetooth devices, such as printers, modems, and PDAs, you want to connect to the Bluetooth stack. 3. Press the USB Bluetooth dongle button until the following HID screen appears. 4. Select the type of devices to search for from the drop-down menu. 5. The detected devices will be displayed. Click on a device and the stack will instruct you to enable the connection. 22 Bluetooth Keyboard and Mouse Combo Set 7 Troubleshooting If you have any problems with your Bluetooth keyboard or mouse, please check the following: • Check the system requirements to make sure that your system is compatible. • Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs inside the keyboard and mouse battery compartments. • When the mouse LED is lit red, it indicates battery power low. Replace them with new batteries immediately. • Once the Bluetooth stack (see “Installing the WIDCOMM Bluetooth Stack” on page 8) has been installed in your computer, you can check the battery status of keyboard and mouse from Control Panel > Keyboard > Bluetooth or Control Panel > Mouse > Bluetooth. • If the keyboard and mouse fail to work, check the USB keyboard and mouse functions in your system’s BIOS. The functions should be enabled for the normal use of keyboard and mouse. For detailed setting, refer to “Enabling the function of USB keyboard/mouse in BIOS” on page 14. • If your PC system’s BIOS setup has options for the keyboard or mouse, make sure they are set to default settings. If you are not familiar with the BIOS, refer to your PC’s manual for more information. • Only use the mouse on a clean, flat, non-slippery surface in order to ensure smooth and accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less battery power. For further assistance with any other questions you may have, please contact your dealer for technical support. 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract Page Mode : UseNone XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:03:13 10:00:39Z Creator Tool : FrameMaker 7.0 Modify Date : 2007:04:30 09:09:15+08:00 Metadata Date : 2007:04:30 09:09:15+08:00 Format : application/pdf Title : Combo_UM.book Creator : chinghung Document ID : uuid:11b14dda-3aa4-4ad3-a4bc-80d14e7375d3 Instance ID : uuid:7b22b218-d7a2-4473-b39b-c61224a15b53 Has XFA : No Page Count : 27 Author : chinghungEXIF Metadata provided by EXIF.tools