Primax Electronics PWP300 WP300 WIRELESS TOUCHPAD User Manual

Primax Electronics Ltd WP300 WIRELESS TOUCHPAD

a href="https://usermanual.wiki/Primax-Electronics" itemprop="url"> Primax Electronics >

User Manual

ENGLISHWP300 Touchpad Q8103 / First Edition / February 2013Package ContentsWP300 TouchpadUSB receiver x1AA battery x2Quick Start GuideabcdacQuick Start Guidedb1.Remove the USB dongle from underneath the WP300 Touchpad.Setting up your Touchpad with your Desktop or Notebook PCNOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Status LED BehaviorON Green Powered on.OFF Off Powered off.Power Saving Mode Off To wake up WP300 from Sleep Mode, click/tap on the touchpad.Pairing in progressFlashing greenThe touchpad is connecting to the USB receiver.Low power Flashing red  Replace the AA batteries.Battery empty Off No touchpad activity. Replace the AA batteries.LED IndicatorTouchpad Gestures1. Finger Slide.Slide your nger across the touchpad to move the pointer.2. Tap/Double Tap• In the Start screen, tap once to launch an app.•In Desktop mode, double-tap an item to launch an application.3. Right edge swipeSwipe from the right edge to launch the Charms bar.4. Top edge swipe•In the Start screen, swipe from the top edge to launch the All apps bar.•In a running app, swipe from the top edge to view its menu.5. Left edge swipeSwipe from the left edge to shufe your running apps.6. Zoom in / Zoom outSpread apart your two ngers on the touchpad to zoom out. Bring together your ngers on the touchpad to zoom in.1. Remove the battery cover.2. Insert the AA batteries into the slot, taking note of the correct polarity.Installing the batteriesNOTE: The included batteries are not chargeable.2. Insert the USB receiver into an available USB port on your notebook or desktop PC.3.Press the power button underneath the touchpad to power on the touchpad. Right click AreaLeft click AreaTouchpad AreaPrimary Button and Context Menu• Primary Button Touchpad and click area: 1-tap with 1 ngerLeft click area: 1-click• Context MenuTouchpad and click area: 1-tap with 2 ngersRight click area: 1-clickAdditional Touchpad GesturesNOTE: The USB receiver can be stored underneath the touchpad.Multi-touch Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up / down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktop4. The system will begin pairing the USB receiver with the touchpad. S-CHINESEPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickAdditional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Touchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.S-CHINESEPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickAdditional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Touchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.S-CHINESEPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickAdditional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Touchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.S-CHINESEPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickAdditional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Touchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.
WP300 Touchpad Q8103 / First Edition / February 2013ITALIANITALIANITALIANITALIANITALIANITALIANPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.
WP300 Touchpad Q8103 / First Edition / February 2013ITALIANITALIANITALIANITALIANITALIANITALIANPackage Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.Package Contents1.  WP300 Touchpad.2.  USB receiver x1.3.  AA battery x24.  Quick Start Guide  .NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™  operating systems. Installing the batteries1.  Remove the battery cover.2.   Insert the AA batteries into the slot, taking note of the correct polarity.NOTE: The included batteries are not chargeable.Setting up your Touchpad with your Desktop or Notebook PC1.  Remove the USB dongle from underneath the WP300 Touchpad.NOTE: The USB receiver can be stored underneath the touchpad. 2.  Insert the USB receiver into an available USB port on your notebook or desktop PC. 3.  Press the power button underneath the touchpad to power on the touchpad.4.   The system will begin pairing the USB receiver with the touchpad.Primary Button and Context Menu•  Primary Button  Touchpad and click area: 1-tap with 1 nger  Left click area: 1-click•  Context Menu Button     Touchpad and click area: 1-tap with 2 ngers  Right click area: 1-clickLED Indicator1.  On - Green - Touchpad powered on.2.   O - O - Touchpad powered o.3.   Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the touchpad.4.   Pairing in progress - Flashing green - The touchpad is connecting to the USB receiver.5.   Low power - Flashing red - Replace the AA batteries.6.   Battery empty - O - No touchpad activity. Replace the AA batteries.Additional Touchpad GesturesFingers Gestures2-ngers Vertical scrollHorizontal scroll3-ngers Brush left / right to go to previous / next pageBrush up/down for Windows® 8™ Start Screen4-ngers Brush left / right to go to previous / next trackBrush up / down to increase / decrease volume5-ngers Brush up / down to hide / resume desktopTouchpad Gestures1.  Finger slide: Slide your nger across the touchpad to move the pointer.2.   Right edge swipe: Swipe from the right edge to launch the Charms bar.3.   Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.4.   Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe from the top edge to view its menu.5.   Left edge swipe: Swipe from the left edge to shue your running apps.6.   Zoom in: Spread apart your two ngers on the touchpad.
Download:
Mirror Download [FCC.gov]
Document ID1911317
Application ID2am30mqDK+i1V9kevfWxiw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize60.16kB (751970 bits)
Date Submitted2013-03-05 00:00:00
Date Available2013-03-20 00:00:00
Creation Date2013-02-27 14:40:55
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2013-03-05 13:11:03
Document TitleUser Manual
Document CreatorAdobe InDesign CS2 (4.0)
FCC ID Filing: EMJPWP300

Navigation menu