Primax Electronics TRFQS2 QS2 CAR SPEAKERPHONE User Manual RF QS2 10 0724 QSG V1 eps

Primax Electronics Ltd QS2 CAR SPEAKERPHONE RF QS2 10 0724 QSG V1 eps

User Manual

IndicatorVolume downPower/Send/EndbuttonMicrophoneVolume upVisor clipCharger connectorQUICK SETUP GUIDEQS2 Car SpeakerphoneRF-QS2Congratulations on your purchase of the RF-QS2 Bluetooth carkit. This carkit enables comfortable, hands-free communication with a Bluetooth-compatible phone.Package contents• RF-QS2 carkit • Car charger adapter • USB charging cable • Quick Setup GuideFeaturesCharging the batteryBefore using your carkit, you must charge it for about two hours. When the battery is fully charged, it provides up to 11 hours of talk time and up to 1,400 hours of standby time.1 USB charging: use the USB cable to plug your QS2 speakerphone into a computer or other USB power port.2 Car charging: use the car charger adapter and USB charging cable to charge your QS2 speakerphone in your car.Turning the carkit on Press and hold the Power/Send/End for about 2 seconds. RF-QS2 beeps and the yellow-green indicator light starts blinking. (First time use requires pressing it for 4 seconds.) Turning the carkit oPress and hold the Power/Send/End for about 4 seconds, RF-QS2 beeps and the red indicator light is displayed briey. Pairing the carkit1 Make sure that the compatible phone is turned on and within 33 ft. (10 m) of the carkit.2 Turn on the QS2 and make sure it’s fully charged. Press and hold the Power/Send/End button for about four seconds. The yellow-green indicator ashes rapidly. Release the button. The carkit is now in pairing mode.3 Activate the Bluetooth connection from the phone. See your phone’s documentation for more information.4 Set the phone to start searching for Bluetooth devices.5 Select RF-QS2 from the list.6 Enter the PIN 0000 to connect (or “pair”) the carkit to the phone. The carkit beeps once, and the indicator blinks yellow-green to indicate the Bluetooth connection is active.To... Do this...Make a call Press Power/Send/End.Redial Double-press Power/Send/End.Answer a call Press Power/Send/End.End a call Press Power/Send/End.Refuse a call Double-press Power/Send/End.Change the speaker Press the volume up button (+) to increase volume volume or press the volume down (-) button to decrease.Mute or unmute a call Press and hold the Volume down (-) button until a tone is heard.Switch a call between Press and hold Power/Send/End for the phone and the carkit two seconds.Voice dialingWhen no call is in progress, quickly press and release Power/Send/End. When you hear a tone, speak the number or voice tag for the number you want to call. (The phone must have a voice dial feature and have recorded voice tags.) Making a callTurning the indicator on or o• Press the power and volume up buttons at the same time for about four seconds. The indicator turns on. Press the power and volume down buttons at the same time for about four seconds. The indicator turns o. You can enable or disable the indicator when the carkit is connected with your phone.Disconnecting the carkit from the phoneTo disconnect the carkit from the phone, do one of the following:• Turn o the carkit.• Disconnect the RF-QS2 in the phone’s menu.• Move the carkit more than 33 ft. (10 m) away from the phone.Note: You do not need to delete the pairing to disconnect the carkit. When you reconnect a paired carkit, you will not be asked for its PIN again.If you want to pair your car kit with new phones, you don’t need to erase all paired device information. There can be up to 8 dierent paired devices information stored.To erase paired devices from your car kit:• When the carkit turned o, press and hold the Power/Send/End and volume up (+) buttons simultaneously for more than six seconds. A tone plays, and the indicator ashes red and yellow-green. The carkit then enters the pairing state automatically.v1R4
Resetting the car kit• If the carkit doesn’t respond, press and hold the power button, then insert the charger into the QS2, then insert the other end into a wall outlet. Then, the carkit will turn o and reset immediately after the charger is connected. To connect the carkit with two phones at the same time:Option 1:1 Turn the carkit on and put it into pairing mode.2 Make a connection with the rst phone.3 Turn the carkit o, then back on again and put it into pairing mode..4 Make a connection with the second phone.5 Turn the carkit o, then back on. The carkit will be connected to both phones automatically.Option 2:1 Turn the carkit on and put it into pairing mode.2 Make a connection with the rst phone.3 Turn the carkit o, then back on again and put it into pairing mode..4 Make a connection with the second phone.5 Initiate a connection from the rst phone. The carkit will be connected to both phones.Option 3:1 Turn the carkit on and put it into pairing mode.2 Try to nd the carkit with both phones at the same time.3 Initiate a connection with the rst phone, then initiate a connection with the second phone. Both phones will be connected to the carkit.ENGLISH 10-0724FCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.FCC ID: EMJTRFQS2You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.Canada IC-RSS210 statementIC: 4251A-CRFQS2Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.One-year limited warrantyVisit www.rocketshproducts.com for details.Contact Rocketsh:For customer service please call 1-800-620-2790.www.rocketshproducts.com© 2010 BBY Solutions, Inc., All Rights Reserved.Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richeld, MN USA 55423-3645ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.To.. .End the active call on the rst phone and answer an incoming call on the second phone.Put the active call on the rst phone on hold and answer an incoming call on the second phone.Reject the waiting call on the second phone and return to the active call on the rst phone. Release active call , and unhold held callHold active call, and unhold held callDo this...Short press Power/Send/EndLong press Power/Send/End until a tone is heardDouble-press Power/Send/EndShort press Power/Send/EndLong press Power/Send/End until a tone is heard

Navigation menu