Primo BTS-007 True wireless earphone User Manual S6 V1 1

Download:
Mirror Download [FCC.gov]
Document ID	3631603
Application ID	2/efQIB5XCggczGgvV4P4A==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.18kB (402188 bits)
Date Submitted	2017-11-08 00:00:00
Date Available	2017-11-08 00:00:00
Creation Date	2017-10-11 10:27:17
Producing Software	Corel PDF Engine Version 1.0.0.458
Document Lastmod	2017-10-11 10:27:17
Document Title	S6说明书-V1.1
Document Creator	CorelDRAW 版本 12.0

True Wireless Earphone
HOW TO CONNECT
Support V4.2 or above versions of Bluetooth devices
TWS
Series
NOTE: This equipment has been tested and found to comply with the limits for a
HOW TO WEAR
1. Pairing the Earbuds
a.Turn off the earbuds.
b.Press both earbuds power button at the same time and hold the power button for
about 8 seconds until the Bluetooth light indicator flashes between blue and red
alternatively,you can hear a voice message,double-click the left earbud's button,
you can hear “Searching...”, then left and right Headset began to automatically match,
match the shell after the success of the left to hear the channel prompt.
c.The above steps to do once, the machine will automatically match in the future.
2.Connect to a bluetooth device
a.Press and hold the power button for 4 seconds until the bluetooth light indicator
flashing,after hear the channel prompt and prepare to pairing.
b.Select “S6tws” or box label model from the list of Bluetooth devices in your
mobile phone.
When the device is connected to the headset only one headset has sound, It means the machine pairing
is not successful, please refer to the first step to re-operation
THE MANUAL
Power/Call button
HOW TO USE
Button functions
Right Channel
Choose your own ear cap
Button
Power/Call button
Microphone
Light Indicator
or
Ear hook
↑
Ear cap
Power/Call button
Left Channel
Function
• Press and hold the call button for 4 seconds to turn the
earphones on or off.
• Press the call button to answer or end a call.
• When there is an incoming call, press and hold the call button
2 seconds to reject the call.
• When standby, Press twice in succession to redial the
last call.
• During music playback, short press to pause or play the music.
• In the shutdown state, press and hold the button for 6-8 seconds to
force into the pairing mode.
Earbud changing point
Charging Switch
• Press the button charging indicator on start to charge the earbuds,
press twice charging indicator off stop to charge the earbuds.
• In general, the headset is placed inside the box,Earbuds will
automatically charged.
Charging Indicator
Note ! different models of ear cap shape will be different
USB charge port
• When the headset is fully charged, the headset light changes from red to blue
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Charging of earphones
The earphones are equipped with a built-in rechargeable battery which is not removable. When
using the device for the first time, ensure that the battery is fully charged.
Connect a charging cable to the charge port of the earphones, and
plug the cable into a standard USB 5V outlet. During charging, the
light indicator will flashes. When the deviceis fully charged, the
indicator will turn red.Then unplug the travel charging cable from
the USB power outlet and the changing box.
• Use only charging adapter approved by authentication. Unapproved or non-standard
USB 5V outlet may result in damaging the earphones, or explosion under
extreme conditions, andwill void the product warrant.
• Repeated charging and discharging of the earphones will decrease the battery
performance over time. This is normal for any rechargeable battery.
• Do not make or receive calls during charging. To answer a call,always unplug
the charging cable first.
• To conserve energy, if not using, unplug the travel charging cable from the earphones.
Because the travel charger does not have a power button, please unplug the travel
charging cable from the socket before disconnecting from the power source. During
usage, the travel charging cable should be kept close to the socket.
When the earphones battery level is low
The headphones will repeat a “battery level low, please recharge” voice message, and at
same time, the light indicator will blink red. If the headphones is out of power during a call,
the call is automatically transferred back to the phone.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 1
Create Date                     : D:20171011102717
Modify Date                     : D:20171011102717
Producer                        : Corel PDF Engine Version 1.0.0.458
Creator                         : CorelDRAW 版本 12.0
Title                           : S6说明书-V1.1

EXIF Metadata provided by EXIF.tools