Private Brand Tools CT008 Wireless CMOS Camera User Manual 008LE
Private Brand Tools Pty Ltd Wireless CMOS Camera 008LE
User Manual
English User's Manual 2.4GHz Color Wireless Camera Kit Night Vision MODEL:008LE Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference. TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) Restrictions Maintenance DVR Maintenance PRODUCT Package Contents Feature Locations Adapter 1~4 1~2 5~7 5~6 INSTALLATION & USAGE CAMERA Installation Camera Channel Setup 8~10 INSTALLATION & USAGE DVR Switch Function Multimedia Record System Setting Plug and Unplug SD card USB Connecting Power adapter charge 10~19 SPECIFICATIONS TROUBLESHOOTING 18~19 20 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. 10~11 11~13 14~15 16~17 17 18 18 INTRODUCTION Thank you for purchase this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera builds in one CMOS image sensor and one transmitting module transmits the captured image wirelessly. Notice Notice: This product may cause interferences with other wireless equipment that operates at 2.4GHz ISM band. Please turn off one of the equipments to eliminate the interference. Product Assurance: This camera will emit electromagnetic wave, just like other wireless products, however, its transmitting power is less than other wireless products such as mobile phones. The 2.4GHz wireless camera meets wireless frequency security standards and recommended indexes while working. These standards and indexes are certificated by academic organization and represent the cogitative research of the scientific workers who continuously explore and annotate the involved fields. So we believe that our products are safe for customers. Approval Information All our products meet the requirements of approval FCC or CE, and obtained the FCC or CE certification. They are authorized to bear FCC or CE mark. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation changes and modification not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules. CE This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark. Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3. DO NOT use this product for any illegal activities. We will not be responsible for any consequences of illegal acts committed by the user. Maintenance 1. 2. 3. 4. 5. Ensure the sufficient ventilation space is available; Do not shake or strike the product; Keep it dry and dustless and avoid exposing it to direct sunlight; Do not place product near any magnetic objects; Avoid putting the product in places where the constantly changed temperature or humidity occurs; 6. Keep product away from heat sources such as electric heater; 7. Do not use the camera near aggressive chemicals; 8. Do not use this camera near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool and the like; 9. Do not use the camera in the places which are enclosed by metal. The surrounding metal like lifter, cabin, may shield the electromagnetic wave, and result in failure of signal reception; 10. Please obey the local government's environment protection policy; 11. Please turn off the power when left unused; 12. Do not disassemble or repair the camera or receiver; doing so might cause damages to the product. DVR MAINTENANCE 1. Do not use the player in extreme heat, cold, dusty and humid environment. 2. Do not make players hit with hard object, otherwise you may cause frazzling on the surface of the player or the batteries shedding or damage to other hardware. 3. Please change batteries in the following condition: A. The system automatically shutdown, or shutdown soon after restart. B. No response when pressing boot button. 4. Never operate the player in extreme dry environment to avoid static. 5. Do not turn off the power while formatting or upload and download, otherwise you may cause a procedural error. 6. While using as a mobile hard disk, please store and export the file according to the correct. document management operating method. The company is not responsible for any errors methodsof operation lead to loss of document. (While connecting with PC, turning off the power suddenly when uploading or downloading will cause the player fail to transmit the file). PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if any item is missing, contact the retailer for replacement. ①2.4GHz Wireless Camera ×1 ②2.4GHz Wireless Receiver ×1 ③Adapter for Camera (DC 5V) ×1 ④Adapter for Receiver (DC 5V) ×1 ⑤AV Cable × 1 ⑥USB Cable × 1 ⑦Mounting Hardware × 1 ⑧Lens Light Barrier(90°/120°) ⑨Silicon case for camera x1 10 Silicon case for Receiver x1 11 User’s Manual × 1 Note: The pictures may vary from the actual objects. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ 10 11 Feature Locations Luminance Adjust Switch(up/down) Lens Light Barrier Indicator Power Switch DC Power Socket Model Control IR Lights Lens Power jack Detel Menu Channel circular OK REC Back Braket Sd card jack On/off AV input jack Power switch AV output jack Power indicator USB jack 1. Support MP3, WAV format music player. 2. Support JPEG picture browsing, zooming function. 3. Support MPEG4 encoder of AVI, ASF format video player. 4. Support MIC recording/ LINE IN straight recording (WAV code). 5. Support audio and video signal straight recording. 6. Support ANSI code of reading electronic documents. 7. Support USB2.0 transfer protocol, transfer rate 480mbps(Max). 8. With file function, such as implementing delete operation. 9. Support 2.4 G wireless receiving, real-time monitoring and recording Adapter This product always conforms to the authenticated AC adapter. The adapter should be marked one of the following: UL Mark SAA Mark American power supply authentication Australia power supply authentication CE Mark PSE Mark European Union power supply authentication Japan power supply authentication GS Mark BS Mark German power supply authentication British power supply authentication Note: When using the power adapter, make sure the rating voltage is compatible with that of the device to avoid potential damages resulting from incorrect usage of power supply. INSTALLATION & USAGE CAMERA Installation ON ON INSTALLATION & USAGE DVR Switch Function 1. Press the ON/OFF button for about 3s to turn on the player. The screen will show power on LOGO and then enter menu. See picture 1. Picture 1 2. Press the ON/OFF button for about 3s to turn off the player in boot state. Return to the upper menu: 1. Press ESC key to return to the upper menu under any circumstances. ◆ Monitor: 1. Select monitor function in the main screen, (See picture 1), then click OK button to enter 2.4G wireless monitoring function. 2. Enter wireless monitoring function then press REC button to start real-time video function. While in video status, press REC button to pause video. Press again to continue video. Press ESC button, the system save the information and exit to the preview mode. 10 3. While video, press MENU button to select parameters adjustment. Loop Time Automatically adjust channel cycle time Bright Brightness adjustment Contrast Contrast adjustment Color Color adjustment 4. Press DEL key while videoing to adjust video resolution: 640*480, 320*240, 160*128. 5. Press CH key to switch to the next channel audiovisual receive, and the corresponding channel indicator will brighten. The system circle in the four channels. 6. Press “ ” UP key to turn up the volume while press “ ” DOWN key to turn down the volume. Multimedia: 1. Select multimedia function in the main screen and the following picture2 will pop up. Click OK to enter multimedia function screen and the following picture3 will pop up. If no file exist in the player, it will show “NO FILE” to prompt the user. Picture 2 11 FILE LIST Picture 3 2. Opening the file in the file list to start multimedia function. A. Album: Opening the file with the postfix of .JPEG to enter into album function. a: Select the JPEG file by pressing UP or DOWN key and click OK key to open it full screen. b: While in full screen status, press UP or DOWN key to show the previous or the following picture. Press OK or ESC key to zoom in or zoom out the picture. When the picture is in the zooming in status, press UP, DOWN, LEFT RIGHT to move the picture up, down, left or right. c: Only support JPEG format, however not all JPEG format picture can be displayed. If the picture transforms with PMP invert software, all invert JPEG picture will display normally. B. MP3 Player Opening the file with the postfix of .mp3 to enter into mp3 play function. a: Enter mp3 file list and press UP or DOWN key to select the song you desire to play. PressOK key to play the song and show the play interface as shown in picture4. 12 NAME: TIME: PLAY TIME: ARTISTS: LYRICS: Picture 4 b: Enter the play interface and press UP or DOWN key to turn up or turn down the volume. Press LEFT or RIGHT key to select the motion you want to perform, for example, pause,play, stop, play previous file, play following file. Select the icon and press ENTER key to perform the function. c: Lyric synchronous: To play the function normally, the lyric file name much be just the same as the mp3 file name, besides they must be in the same list. C. Electronic Document Read Opening the file with the postfix of .TXT to enter into electronic document function. a: Enter electronic document list interface and press UP or DOWN key to select the .txt file you desire to read. Select the file and press OK key to show the file full screen. Press UP or DOWN key to page up or page down. b: Only support ANSI code format file. D. MP4 player Opening the file with the postfix of .AVI, ASF, MOV, MP4 to enter into MP4 video function. 13 ◆ Record 1. In the main screen, select REC function (see picture 5) and click OK key to enter REC function interface. See picture 6. Picture 5 Video Recording Audio Microphone Picture 6 a: Plug the corresponding AV wire then select video and press OK key to enter AV-IN function. 14 Connect the player with TV or DVD with AV wire. Plug the AV connecting wire with 3.5mm pin into the AV IN jack of the player, then plug the AV wire with the yellow, red and white output pin into the AV output socket of TV or DVD. (Yellow - Video) (Red - Left-channel) (White - Right-channel) Red Output white yellow Intput S-Terminal Right-Audio 2-left Video 2 Picture 7 b: Plug AUDIO wire, select record and press OK key to enter into LINE-IN record function. c: Select transmitter, click OK key to enter into MIC record function (See picture 8). Press REC key to start to time record. Press again to stop. d: The record capacity is to storage until the memory is full. Picture 8 15 System setting: Select the system setting function (See picture 9) in the main screen and press OK key to enter into system setting interface (See picture 10). Press UP or DOWN key to select the options you desire to set. Click OK key to enter into the setting of this option and press UP or DOWN key to select the value you desire to set. Finally click OK key to confirm your settings. Picture 9 Picture 10 16 1. Storage: Select the memory and SD card. 2. Storage Size: Examine the memory capacity. 3. Format: a: Format: Format the memory. Note: All information will lose while formatting. b: Cancel: Format cancel and return to the upper menu. 4. Clock Set: Set time and date. 5. Display Setting: a: LCD: Image display on the PMP screen b: TV: Image is unable to display on the PMP screen, however, it can output the signal by video port, you also can connect it to the TV. Note: Make sure you have plugged the AV connecting wire with 3.5mm pin into the AV OUT jack of the player, and the AV wire with the yellow, red and white output pin have been plugged into the AV input socket. Output Red white yellow Intput (Yellow - Video) (Red - Left-channel) (White - Right-channel) S-Terminal Right-Audio 2-left Video 2 6. Brightness: Adjust the brightness of the player. 7. Auto Power Off: Set automatically shutdown time. 8. Default: Select the default to default the setting. Plug and unplug SD card 1. Support hot-swap SD card, that is you don’t need to shutdown while swap the card. 17 USB connecting 1. Turn on the player first. 2. Connect the fringe USB connecting wire to your PC USB interface and the USB interface of the player. 3. The player screen will show the confirm dialog. a: Selection: Storage The “Local dick” letter will show in window system resource manager. If using WIN98 system, please install player management software and connect it to the device. Then the player installation is finished and you can upload the file by USB wire. b: Selection: Firmware upgrade Used to update software upgrade. Power adapter charge When the red indicator on the player lightens, the player is charging by the power adapter. If the indicator turns green, the charging is finished. (Note: Only use the special power adapter, otherwise you may cause the player damage. The manufacture take no responsible for such kind of damage. ) CAMERA SPECIFICATION Imaging Sensor CMOS Total Pixels View Angle Transmission Frequency Transmission Power Modulation Type Bandwidth Power Supply 1/18inch CMOS 320*240(NTSC) 55o ISM 2,400MHz~2,483MHz 10mW/CE; 2mW/FCC FM 18MHz DC 5V 2A 50mA 10m(Min) Consumption Current Unobstructed Effective Range * Actual transmission range may vary according to weather, location, interference and building construction. * All the specifications are subject to minor change without prior notice. 18 Receiver Alternating current AC100V-240V Direct current DC 5V 2A Power 0.8W, display for 4-5 hours Power supply Built-in 3.7V 1500mAh Li-battery Charging time 3hours TV system PAL/NTSC S/N ratio ≥85dB Headphone output power 5mW(L)+5mW(R) at 32 Ohm Speaker output power 1W at 8Ohm Audio file format MP3, WAV Image file format JPEG Video file format MPEG4(*AVI, ASF) VGA 640*480 30pfs Display 2.5’’ TFT LCD (320RGB X240) SD card -<2GB 2.4G module sensitivity -85 dBm 2.4G module band 2400-2483 MHz USB Version 2.0 High Speed (480MB/S) Support OS Windows98/SE/ME/2K/XP/Vista Display language Simple English, Chinese 19 TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image No sound No image Noisy Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. Check wether the li-battery runs out Snowflakes on image Noisy 1. Check if the channel of receiver is the same as that of camera; 2. Check the distance & blocks. 1. Interfered with other devices; 2. Check the distance & blocks. Ghost image Normal sound Mismatching the TV system of PAL or NTSC. No color Normal sound Interfered with other devices nearby; Remove or turn off such devices. Normal image Noisy 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.525 Mod Date--Text : Format : application/pdf Creator : dengxl Title : 008LE Creator Tool : CorelDRAW 12.0 版 Modify Date : 2009:06:04 14:46:58+08:00 Metadata Date : 2009:06:04 14:46:58+08:00 Document ID : uuid:6e6976cd-931a-48ce-a4cd-fb8af8fb446c Instance ID : uuid:ec61ee1e-e967-4282-acaa-e044d4392a7b Has XFA : No Page Count : 22 Create Date : D:20090409145046 Author : dengxlEXIF Metadata provided by EXIF.tools