Pro Lite DTR900-FC Wireless USB User Manual revised
Pro-Lite, Inc. Wireless USB Users Manual revised
Pro Lite >
Users Manual
060406 (DTR900-FC USB + DTR900-FC TTL) Features: Wireless Data collection module with USB or TTL (level) interface. 433MHz RF frequency. Modulate Type: FSK. According to FCC 47CFR15.231e.The EUT shall be provided with a means for automatically limiting operation so that the duration of each transmission shall not be greater than one second and the silent period between transmission shall be at least 30 times the duration of the transmission but in no case less than 10 seconds. The software build in module. Any customer / end-user can not make any modifications. Transmission range: <200 m. ( open area ). Baud rate:9600bps. DC Power: USB Power or 5VDC external Power. Size: Main Unit : 45 x 70 x 22 mm ANT Unit : Φ15 x 86mm USB prolong wire:1.5m TTL prolong wire:360mm Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The users manual or instruction manual for an unintentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Baud rate: 9600bps Frequency: 433MHz B1.Signal LED(Green) B2.Power Wireless USB USB/TTL C1.USB interface C2.TTL interface Part A- ANTENNA According to FCC Rules, Part 15.203, a unique antenna coupling is required. The EUT has a built in antenna which is a short wire solder on the PCB, This antenna meets the requirements of this section. Part B- LED B1: Signal Green LED B2: Power Red LED Part C- INTERFACE C1: USB prolong wire C2: TTL prolong wire PIN DEFINE: USB/TTL 1 23 4 USB pin Name Function VCC Usb Power D+ USB D+ D- USB D- GND GND TTL pin Name Function RXD Data Input to module TXD Data Output from module VCC +5VDC GND GND Application: USB MODULE This module Connect to computer with USB interface. The PC must be installed the USB equipment’s driver, and the PC will increase a COM, the COM is dummy, and the module will transmit or receive info.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Title : Users Manual revised.doc Author : Apollo Creator : pdfFactory Pro www.fineprint.cn Producer : pdfFactory Pro 2.51 (Windows XP Professional Chinese) Create Date : 2006:05:02 19:04:36+08:00 Page Count : 2EXIF Metadata provided by EXIF.tools