Pro Lite ZF01-D Wireless module User Manual User guide

Pro-Lite, Inc. Wireless module User guide

Contents

TWNZF01-D_Operation Manual_Rev2

ZF01-D Wireless Module User guide  Figure 1. ZF01-D wireless module     z Interface & Cable:  channel settingswitchPCAntennaLED SignInterfaceInterfacecableFigure 2. ZF01-D RS-422 Interface & Cable .
 channel settingswitch  PCAntennaLED SignInterfaceInterfacecableFigure 3. ZF01-D RS-232 Interface & Cable   USB channel settingswitchPCAntennaLED SignInterfaceInterfacecableVCCD-D+GNDFigure 4. ZF01-D USB Interface & Cable
 channel settingswitchPCAntennaLED SignInterfaceInterfacecable Figure 5. ZF01-D TTL Interface & Cable   Main Technical Specifications: RF channels(MHz) 433.050,432.700,433.310,433.540,434.050,434.310,434.610,434.910 modulation mode GFSK  baud rate 9600bps Interface  data format UART ,8E1/8N1 data format Power supply  DC 3.6V---5V overall dimensions 70 X 45 X 17 mm
 z Communication Application: Figure6.  ZF01-D wireless communication application diagramChannel setting There is a channel setting switch as shown in Figure 2, defined as A,B,C respectively,  so there are 8 channels can be set . Channel A2 A1 A0 Freq. 0 OFF OFF OFF 433.050MHz 1 OFF OFF ON 432.700MHz 2 OFF ON OFF 433.310MHz 3 OFF ON ON 433.540MHz 4 ON OFF OFF 434.050MHz 5 ON OFF ON 434.310MHz 6 ON ON OFF 434.610MHz 7 ON ON ON 434.910MHz Wireless communication channel settingPCLED SignInterfaceInterfacePCLED SignInterfaceInterfaceTTLRFMCURS422USBRS232 TTLRFMCURS422USBRS232
z FCC Notices 1. The manufacturer is not responsible for any radio or TV Interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.  2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.  This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Navigation menu