Contents
- 1. TWNZF01-D_Operation Manual_Rev2
- 2. user manual
user manual
ZF01-D Wireless Module Operation Manual Figure 1. ZF01-D wireless module z Features: 1.Providing RS-422/USB/RS-232/TTL interface,highly integrated,can connect with 2. 3. 4. 5. t ransceiver equipment directly. Low power RF transmission:Maximum transmit power 10mW GFSK/FSK modulation mode Crystal frequency stabilization. High-efficiency forward error correction channel encoding technology is used. z Main Application Areas: 1. 2. 3. 4. 5. AMR – Automatic Meter Reading Wireless alarm and security systems Wireless POS, PDA Long-distance non-contact RF smart cards, RFID tags. Wireless Field Bus、wireless conference voting system z Main Technical Specifications: RF channels(MHz) 433.050, 433.640, 434.410,434.910 modulation mode GFSK baud rate 9600bps output power 10mW Interface format data UART ,8E1/8N1 data format Power supply DC 3.6V---5V overall dimensions 70 X 45 X 17 mm Channel Figure2. interface and sizes z Interface Description: ZF01-D wireless module can be directly connected to equipment by Interface port,shown as Figure3. wireless communication application diagram shown as Figure4 Figure3. ZF01-D Interface connect Table1.Interface connect USB connect D+ to D D- to C VCC to G GND to E (orF) RS-422 connect +TX to A -TX to B -RX to C +RX to D RS-232 RXD to 6 TXD to 7 GND to 5 TTL RXD to 4 TXD to 3 GND to 5 Figure4. ZF01-D wireless communication application diagram z Channel setting There is a channel setting switch as shown in Figure 2, defined as A,B,C respectively, so there are 8 channels can be set . Channel A1 OFF OFF ON ON A0 OFF ON OFF ON Freq. 433.050MHz 433.640MHz 434.410MHz 434.910MHz Canada/FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct z The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help z This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note:“Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2012:05:30 13:50:03+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:05:30 13:50:03+08:00 Format : application/pdf Creator : 0197 Title : Microsoft Word - ZF01-D.doc Document ID : uuid:31c5e53a-92cd-455a-8043-5a27092998a6 Instance ID : uuid:aa6f7348-1882-4ad0-a46a-db507dec8727 Page Count : 5 Author : 0197EXIF Metadata provided by EXIF.tools