Proform 831280442 User Manual WHIRLWIND Manuals And Guides L0312032

PROFORM Cycle Manual L0312032 PROFORM Cycle Owner's Manual, PROFORM Cycle installation guides

User Manual: Proform 831280442 831280442 PROFORM WHIRLWIND PROFORM - Manuals and Guides View the owners manual for your PROFORM WHIRLWIND PROFORM #831280442. Home:Fitness Equipment Parts:Proform Parts:Proform WHIRLWIND PROFORM Manual

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

irlwind
DUAL
Model No, 831.280442
Serial No.

ACTION

USER'S MANUAL

Serial
Number
Decal

EX

EE R

C

E(_UIPM

I _.

E

ENT

HELPLINE!

1-800-736-6879

Patent Pending

SEARS, ROEBUCK AND CO.,
HOFFMAN ESTATES, IL 60179

www.proform.com
new products, prizes,
fitness tips, and much more!

DUAL

ACTION

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS .............................................................
BEFORE YOU BEGIN ...................................................................
ASSEMBLY ...........................................................................
HOW TO OPERATE THE EXERCISE CYCLE .................................................
MAINTENANCE AND TROUBLESHOOTING .................................................
EXERCISE GUIDELINES ................................................................
PART LIST ...........................................................................
EXPLODED DRAWING .................................................................
HOW TO ORDER REPLACEMENT PARTS ...........................................
FULL 90 DAY WARRANTY .......................................................

2

3
4
5
9
11
12
14
15
Back Cover
Back Cover

3

BEFORE YOU BEGIN
Congratulationsfor selecting the new PROFORM ®
WHIRLWIND exercise cycle. Cycling is one of the
most effective exercises for increasing cardiovascular
fitness, buildingendurance, and toning the entire
body. The PROFORM ®WHIRLWIND offers an array
of features designed to let you enjoy this healthful
exercise in the comfort and privacy of your home.

HELPLINE at 1-800-736-6879, Monday through
Saturday, 7 a.m. until 7 p.m. Central Time (excluding
holidays). To help us assist you, please mention the
product model number when calling. The model number is 831.280442. The serial number can be found
on a decal attached to the exercise cycle (see the
front cover of this manual).

For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our toll-free

Before reading further, please familiarize yourselfwith
the parts that are labeled in the drawing below.

Water Bottle Holder*
Bookrack
Pulse Sensor

Console
T-handle

Handlebar

FRONT

Seat

Seat Knob

LinkArm
Lock Rod
BACK
Pedal
RIGHT SIDE

*Water bottle is not included

4

ASSEMBLY
Assembly requires two persons. Place all parts of the exemise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing matedals until assembly is completed.
Assembly can be completed using the included tools; however, a rubber mallet (_
t_J
recommended.

I is also

Usa the drawings below to identify the small parts used in assembly.The number in parenthesisbelow each
drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the
quantity needed for assembly. Note: Some small parts may have been prs-attached for shipping. If a part is
not in the parts bag, check to see if it has been pre-assembled.

M6 Nylon
Locknut(56)-4

M4 x 12ram
Screw (77)-2

M8 Nylon
Locknut (66)-6

M8 Split
Washer (81)-4

M10 Nylon
Locknut (64)-4

M6 x 38mm Button
Bolt (57)-4

M8 x 77mm Button Bolt (58)-2

M8 Flat
Washer (73)-4

M10 x 17mm Button
Screw (55)-3

M10 Split
Washer (54)-12

M10 x 22ram Button
Screw (60)-9

M1O x 75mm Carriage Bolt (65_

[_

1. Attach one of the Stabilizers (19) to the front of the
Frame (t) with two M1O x 75mm Carriage Bolts (65)
and two M10 Nylon Locknuts (64).

1
65

5

19

2. Attach the Frame Extension (84) to the Frame (1)
with six M10 x 22mm Button Screws (80) and six
M10 Split Washers (54).
Attach the other Stabilizer (19) to the Frame
Extension (84) with two M10 x 75mm Carriage Bolts
(65) and two M1O Nylon Locknuts (64).

54

80

64
19

80
3. Attach the Seat (20) to the Seat Post (6) with four
M8 Nylon Locknuts(66) and four M8 Split Washers
(81). Note: The Nylon Locknutsand Split Washers
may be preattached to the Seat.

3

Turn the Seat Knob (29) counterclockwisetwo or
three turns to loosen it. Next, pull the Seat Knob,
insertthe Seat Post (6) into the Frame (1), and then
release the Seat Knob. Move the Seat Post up and
down slightly until it locks into position.

7O

Push the Seat Guide (46) intothe top of the Frame
(1). Secure the Seat Guide to the Frame with an M4
x 4ram Screw (70). Then, tighten the Seat Knob.

4. Apply a small amount of the included grease to the
Handlebar Axle (33). Insertthe Handlebar Axle into
the Frame (1) and center it. To avoid damaging
the Reed Switch Wire (3t), make sure that it is
positioned as shown in the inset drawing. (Note:
It may be helpfulto use a rubber mallet to insertthe
Handlebar Axle.)
While another person holds the Upright (2) in the
positionshown, connect the ExtensionWire (39) to
the Reed Switch Wire (31). Carefully pull the
upper and of the Reed Switch Wire to remove
any slack.
Set the Upright (2) on the Frame (1); be careful not
to pinch the Extension Wire (39) or the Reed
Switch Wire (31). Attach the Updght with three M10
x 17mm Button Screws (55) and three M10 Split
Washers (54).

Side

55 54

5.

The Console (3) requires four "D" batteries (not
included); alkaline batteries are recommended.
Press the tab on the battery cover, and lift off the
battery cover. Insert four batteries intothe battery
compartment. Make sure that the batteries are
oriented as shown by the diagram inside the
battery compartment. Reattach the battery cover.
Batteries <

6. Refer to the inset drawing. Insert the T-handle (4)
intothe opening in the bottom of the Console (3) as
shown. Be careful not to pinch the console wire.
Align the holes in the metal tube on the T-handle
with the holes in the bracket on the Console.
"13ghten
two M4 x 12mm Screws (77) into the holes.

3

Sookrack
Be careful
not to pinch
the console wire
during this step.

3_

Consok

While another person holds the Console (3) near
the Updght (2), connect the console wire to the
ExtensionWire (39). Insert the excess console wire
and Extension Wire intothe Upright.
Attach the Console (3) to the Upright (2) with three
M10 x 22ram Button Screws (80) and three M10
Split Washers (54). Be careful to avoid pinching
the console wire or the Extension Wire (3g).
Snap the bookrack onto the Console (3) in the location shown.
77
7. Identifythe Left Handlebar (7) and the Left
Handlebar Base (8), which are marked with stickers.
Attach the Left Handlebar to the Left Handlebar
Base with two M6 x 38mm Button Bolts(57) and
two M6 Nylon Locknuts (56).
Attach the Right Handlebar (not shown) to the Right
Handlebar Base (not shown) in the same way.

7

8. Slide the Left and Right Handlebars (7, 9) onto the
Handlebar Axle (33). Make sure that the
Handlebars are on the correct sides.

8
33

Using the included pedal tool, tap a Push Nut (78)
onto each end of the Handlebar Axle (33). Make
sure that the Push Nuts are turned as shown in
the inset drawing. (Note: It may be helpful if another person holds a block of wood against one end of
the Handlebar Axle while you tap a Push Nut onto
the other end.) Then, tap a Large Axle Cap (49)
onto each end of the Handlebar Axle.

78

9. Identify the Left LinkArm (15), which is marked with
a sticker.

9

Apply a small amount of grease to an M8 x 77mm
Button Bolt (58). insert the Button Bolt into the Left
Handlebar Base (8). Slide an M8 Flat Washer (73),
a Link Arm Bushing (45), the Left LinkArm (15), and
another M8 Washer (73) onto the Button Bolt. Make
sure that the Link Arm Bushing and the Left
Link Arm are tumed as shown. Tighten an M8
Nylon Locknut (66) onto the Button Bolt. Rest the
notch in the Left LinkArm on the left lock rod.

8.

58
;raase

Attach the Right LinkArm (not shown) to the Right
Handlebar Base (not shown) in the same way.

Rod

Notch

10. Remove the 112"Pedal Nut (68) from the shaft of
one of the Pedals (23). Make sure that there is a
Pedal Spdng (42), a Red Washer (71), a Pedal
Bushing (43), a Black Pedal Washer (79), and a
Pedal Spacer (44) on the shaft of the Pedal. In addition, make sure that the Pedal Bushing (43) is
turned as shown. Firmly tighten the shaft of the
Pedal clockwise intothe left Crank Arm (28).
Tighten the 1/2" Pedal Nut (68) back onto the shaft.
Attach the other Pedal (not shown) in the same way.

79
43
71
23

11. Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat
beneath the exercise cycle to protect the floor.

8

HOW TO OPERATE THE EXERCISE

CYCLE

HANDLEBAR OPERATION

HOW TO ADJUST THE SEAT

The handlebars can be used in either the dual-action
mode, for both upper-body and lower-bodyexercise,
or the stationary mode, for pedaling exercise only.

For effective exercise, the seat must
Seat
be at the proper
height. As you
pedal, there should
be a slight bend in
your knees when
the pedals are in
the lowest position.
To adjust the seat,
first turn the seat
Post
Knob
knob counterclockwise two or three
turnsto loosen it.
Next, pull the seat
knob, raise or lower the seat post, and then release
the seat knob. Move the seat post up and down
slightly until it locks into position. Then, tightenthe
seat knob. CAUTION: Make sure that the pin on the
seat knob is inserted into one of the adjustment
holes in the seat post. Do not rest the seat post
on top of the pin on the seat knob.

Dual-action Mode
To convertthe
handlebars to
the dualaction mode,
the link arms
must be connected to the
pedals. Refer
to drawing 1.
Rod
Lift the link
arms offthe
lock rods.
Refer to draw_--t
l _'_edal
ing 2. Pull the
link arms outward against
the tops of
the red washers, while
pulling
against the
bottoms of the
Link Arm
\
red washers
with your fingem as shown. Be careful not to pinch your fingers. Next, slide the link arms onto the pedal bushings. Move the linkarms up and down slightlyto
make sure that they are fully seated on the pedal
bushings.CAUTION: Make sure that the link arms
are fully seated on the pedal bushings, If the link
arms are not on the pedal bushings, they may slip
off during use, resulting in injury to the user.

2

Red

DESCRIPTION OF THE CONSOLE
The console features six modes that provide instant
exercise feedback dudng your workouts.The modes
are described below.
• Time--This mode displays the elapsed time.
• Distance--This mode displays the total distance you
have pedaled.
• Speed_This mode displays your pedaling speed.
Note: Speed and distance can be displayed in either
miles or kilometers.An MPH or a KPH will appear
when the speed is displayed to show which unit of
measurement is selected. To change the unit of
measurement, press and hold the On/Reset button
for ten seconds.

Stationary Mode
To convert the handlebars to the stationary mode, the
link arms must be disconnected from the pedals. Pull
the link arms outward against the red washers until
the link arms are free of the pedal bushings(see
drawing 2 above). Be careful not to pinch your fingers. Next, lif_the link arms off the pedals, and clip
them onto the lock rods (see drawing 1 above).

• Calories--This mode displays the approximate number of calodes you have bumed.
• Fat calories---This mode displays the approximate
number of fat calodes you have burned (see FAT
BURNING on page 12).
• Pulse--This mode displays your heart rate when the
thumb pulse sensor is used (see step 3 on page 10).

9

BATTERY INSTALLATION

To reset the displays at any time, press the
On/Reset button.

The console requiresfour "D" batteries. To install batteries, refer to assembly step 5 on page 7.

3. Measure your heart rate, if desired.

HOW TO OPERATE THE CONSOLE

To measure
your head rate,
stop pedaling
and place your
thumb on the
pulse sensor as
shown. The
pulse sensor is
pressureactivated---fully press it down. Do not press too hard, or
the circulation in your thumb will be restricted,
and your pulse will not be detected. Next, raise
your thumb slightlyuntilthe heart-shaped indicator
in the right displayflashes steadily. Hold your
thumb at this
level.After a few

Note: If there is a piece of clear plasticon the face of
the console, remove it before operating the console.
1. To turn on the
power, press
the On/Reset
button or begin
pedaling.

seconds, two
appear in the
dashes will
display,and

2. Begin exercisingand monitoryour progresswith the
two displays.

pedaling speed
shows
and theyour
approx-

SPEED
[ "

imate numbers
CALS.
FAT CALS.
of calodes and
fat celodes you
have burned.
When the thumb pulse sensor is used, the display
will also show your heart rate (see step 3 at the
right). Every seven seconds, the display will change
from one number to the next, as shown by the indicators in the display.

I "JI __. U
1
I _JI --|

Make sure that you are applyingthe proper amount
of pressure to the pulse sensor. Try the pulse sensor
several times untilyou become familiar with it.
Remember to sit still while measuring your heart
rate.

PULSE

_ "_--|
_I,C'
up, 1

{

PULSE

then your heart
OALS.
FAT CALS.
rate will be
shown. Hold
yourthumb on
the pulse sensorfor another 15 secondsfor the
most accurate reading. If the displayedheart rate
appears to be too high or too low,or if your heart
rate is not displayed, liftyour thumb off the pulse
sensor and allow the display to reset. Press down
again on the pulse sensor as describedabove.

Left display-This display
shows the
elapsed time
and the disTIME_ DISTANCE
tance that you
Indicators
have pedaled.
The display will
change from
one number to the other every seven seconds, as
shown by the indicators in the display.
Right display-This display

SPEED

4. To turn off the power, simplywait for a few minutes.
The console has an "auto-off' feature. If the
pedals are not moved and the On/Reset button
is not pressed for a few minutes, the power will
turn off automatically to conserve the batteries.

10

MAINTENANCE

AND TROUBLESHOOTING

Inspect and tighten all parts of the exercise cycle regularly.To clean the exercise cycle, use a damp cloth
and mild detergent. Never use abrasives or solvents;
keep liquidaway from the console.

the M6 Nuts counterclockwise. Make sure that the fan
is straight,and then reattachthe LeftGuard, tightenthe
GuardFasteners,and reattachthe GuardClips.
ADJUSTING THE REED SWITCH

CONSOLETROUBLESHOOTING
If the console does not function properly,the batteries
should be replaced. See assembly step 5 on page 7
for battery installationinstructions.
ADJUSTING THE BELT
The exercise cycle features a precisionbelt that must
be kept properlyadjusted. If the belt is too tight, the
bearings may be damaged; if the belt is too loose, the
fan may be damaged. If the belt causes excessive
noise or slips as you pedal, follow the steps below.

If the console does not display correct feedback, the
reed switch should be adjusted,To adjust the reed
switch,the Right Side Shield (18) must be moved (refer
to the drawing below). Remove the four M4 x 25mm
Screws (69) from the Left Side Shield (17). Lift the
Right LinkArm (16) off the pedal or the lookred and
move it clear of the Right Side Shield, Pullthe top of
the Right Side Shield away from the Left Side Shield.
18

Carefully remove the four Guard Clips (76), the left
Guard Fastener (35), and the Left Guard (13). Press
down on the Belt (22). There should be no more
than 3/4 inch, and no less than 1/4 inch, of vertical movement in the center of the Belt.

69

76 <

Next, locate the Reed Switch (31). Turn the Crank Arm
(26) until the Magnet (48) is alignedwith the Reed
Switch. Loosen,but do not remove, the M4 x 16mm
Screw (27). Slide the Reed Switch slightlycloserto or
away from the Magnet. Retighten the Screw. Turn the
Crank for a moment. Repeat until the console displays
correctfeedback. When the Reed Switch is correctly
adjusted, reattach the Right Side Shield.

Note: For clarity, the
Right Side Shield is
not shown.

If the Belt (22) needs to be adjusted,loosen the right
Guard Fastener (not shown). To tighten the Belt, turn
the M6 Nuts (53) clockwise; to loosen the Belt, turn

26

11

EXERCISE GUIDELINES
Fat Burning
To burn fat effectively,you must exercise at a relatively low intensitylevel for a sustained periodof time.
During the first few minutes of exercise, your body
uses easily accessible carbohydratecalories for energy. Only after the first few minutesof exercise does
your body begin to use stored fat calories for energy. If
your goal is to bum fat, adjust the intensity of your
exercise until your heart rate is near the lowest number or the middle number in your training zone as you
exercise.
Aerobic Exercise
The following guidelineswill help you to plan your
exercise program. Remember that proper nutdtion and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascularsystem, the key to achieving the
desired resultsis to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat buming, and cardiovascular(aerobic) exercise.

PULSE TRAINING ZONES
AGE 20 30 40 50 60 70 80
MAX 165 155 145 140 130 125 115
bpm 145 138 130 125 118 110 103
MIN 125 120 115 110 105 95 90

To find the proper heart rate for you, first find your age
on the chart above (ages are rounded off to the nearest ten years). Next, find the three numbers below your
age; the three numbers are your _training zone." The
lowest number is the recommended heart rate for fat
burning;the middle number is the recommended heart
rate for maximum fat burning;and the highest number
is the heart rate for aerobic exercise.

If your goal is to strengthenyour cardiovascularsystem, your exercise must be "aerobic."Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump bloodto the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise untilyour heart
rate is near the highest number in your training zone.
WORKOUT GUIDELINES
Each workout should include the followingthree parts:
A warm-up, consistingof 5 to 10 minutes of stretching
and light exercise. A proper warm-up increasesyour
body temperature, heart rate, and circulationin preparationfor exercise.
Training zone exercise, consistingof 20 to 30 minutes of exercisingwith your heart rate in your training
zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibilityof your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improveyour condition,plan three workouts each week, with at least one day of rest between
workouts.After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. The key to success is make exercise a regular and enjoyable part of your everyday life.

12

SUGGESTED STRETCHES
The correctform for several basic stretches is shown at the right.
Move slowly as you stretch---never bounce.
1. Toe Touch Stretch

Stand with your knees bent slightlyand slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach down
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times. Stretches: Hamstdngs, back of knees and back.
2

2. Hamstring Stretch
Sit with one leg extended. Bdng the sole of the oppositefoot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstdngs, lower back and
groin.
3. CelflAchilles Stretch
With one leg in front of the other, reach forward and place your hands
against a wall. Keep your back leg straight and your back foot flat on
the floor. Bend your front leg, lean forward and move your hips
toward the wall. Hold for 15 counts, then relax. Repeat 3 times for
each leg. To cause further stretchingof the achilles tendons, bend
your back leg as well. Stretches: Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp one
foot with your other hand. Bdng your heel as close to your buttocks
as possible. Hold for 15 counts, then relax. Repeat 3 times for each
leg. Stretches: Quaddceps and hip muscles.

13

EXPLODED
Key No.

Qty.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
2
1
4
1
2
2
1
2
2
1
1
2
1
1
1
6
2
1
2
2
1
1
2

DRAWING--Model
Description

No. 831.280442
Key No. Qty.

Frame
Upright
Console
T-handle
Fan
Seat Post
Lett Handlebar
Left Handlebar Base
Right Handlebar
Right Handlebar Base
Foam Grip
Handlebar Endcap
Laf_Guard
Right Guard
Left LinkArm
Right LinkArm
Left Side Shield
Right Side Shield
Stabilizer
Seat
Stabilizer Endcap
Belt
Pedal
Handlebar Base Endcap
Pulley!Crank
Crank Arm
M4 x 16mm Screw
BearingAssembly
Seat Knob
Guard Bracket
Reed Switch/Wire
Clamp
Handlebar Axle
Handlebar Bushing
Guard Fastener
Fan Axle
Fan Beadng
Adjustment Bracket
Extension Wire
Idler Arrn
Crank Cover

42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
#

2
2
2
2
1
1
1
2
2
1
2
2
12
3
4
4
2
1
1
2
4
1
5
4
6
2
2
9
1
2
4
4
1
1
4
2
2
2
9
1

R1102A

Description
Pedal Spring
Pedal Bushing
Pedal Spacer
Link Arm Bushing
Seat Guide
Seat Post Bushing
Magnet
Large Axle Cap
Small Axle Cap
Fan Washer
Eyebolt
M6 Nut
M10 Split Washer
M10 x 17mm Button Screw
M6 Nylon Locknut
M6 x 38ram Button Bolt
M8 x 77mm Button Bolt
M10 x 25ram Flat Head Bolt
Frame Extension
Axle Bushing
M4 x 16mm Round Screw
idler Arm Washer
M10 Nylon Locknut
M1O x 75ram Carriage Bolt
M8 Nylon Locknut
Flange Screw
1/2" Pedal Nut
M4 x 25mm Screw
M4 x 4mm Screw
Red Washer
M8 Split Washer
M8 Flat Washer
Fan Spacer
Idler Spdng
Guard Clip
M4 x 12mm Screw
Push Nut
Black Pedal Washer
Mt0 x 22ram Button Screw
User's Manual

Note: "#" indicates a non-illustratedpart. Specifications are subjectto change without notice. See the back cover
of this manual for informationabout ordering replacement parts.

14

EXPLODED DRAWING--Model

No. 831.280442

R1102A

76
12
53

38
36
8O
39

35
55

23

68
43
65

"32
29

28
67
20

5O

56

69

80
21

.J

73

69
43
65

::72

66
15

SEARS
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service
Center. To request service or to order parts by telephone, call
the toll-free numbers listed at the left.

Model No. 831.280442

QUESTIONS?

When requesting help or service, or ordering parts, please be
prepared to providethe followinginformation:

If you find that:
• you need help assembling or
operating the PROFORI_
WHIRLWIND
• a part is missing
• or you need to schedule repair
service
call our toll-frae HELPLINE

• The MODEL NUMBER of the product (831.280442)
• The NAME of the product(PROFORM ®WHIRLWIND
exercise cycle)
• The KEY NUMBER and DESCRIPTION of the PART (see
the PART LIST and the EXPLODED DRAWING on pages 14
and 15)

1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS
If parts become worn and need to
be replaced, call the following tollfree number

1-800-FON-PART
(1-800-366-7278)

FULL 90 DAY WARRANTY
For 90 days fi'omthe date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS BIKE EXERCISER, contact the nearest SEARS Service Center throughoutthe United States
and SEARS will repair or replace the BIKE EXERCISER, free of charge.
This warrantydoes not applywhen the BIKE EXERCISER is used commerciallyor for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Part No. 193742 R1102A

Pdnted in China © 2002 Sears, Roebuck and Co.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 16
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Apr 03 04:47:00 2007
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools